[PATCH 3/3] ARM: dts: stm32: enable USB OTG HS on stm32h743i-eval

From: Amelie Delaunay
Date: Thu Feb 15 2018 - 11:04:32 EST


This patch enables USB HS on stm32h743i-eval in OTG (DRD) mode.
The USB connector used will determine the role of USB OTG controller.

Signed-off-by: Amelie Delaunay <amelie.delaunay@xxxxxx>
---
arch/arm/boot/dts/stm32h743-pinctrl.dtsi | 20 ++++++++++++++++++++
arch/arm/boot/dts/stm32h743i-eval.dts | 16 ++++++++++++++++
2 files changed, 36 insertions(+)

diff --git a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
index ee5202d..0f15dfb 100644
--- a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
@@ -188,6 +188,26 @@
bias-disable;
};
};
+
+ usbotg_hs_pins_a: usbotg-hs@0 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 4, AF10)>, /* ULPI_NXT */
+ <STM32_PINMUX('I', 11, AF10)>, /* ULPI_DIR> */
+ <STM32_PINMUX('C', 0, AF10)>, /* ULPI_STP> */
+ <STM32_PINMUX('A', 5, AF10)>, /* ULPI_CK> */
+ <STM32_PINMUX('A', 3, AF10)>, /* ULPI_D0> */
+ <STM32_PINMUX('B', 0, AF10)>, /* ULPI_D1> */
+ <STM32_PINMUX('B', 1, AF10)>, /* ULPI_D2> */
+ <STM32_PINMUX('B', 10, AF10)>, /* ULPI_D3> */
+ <STM32_PINMUX('B', 11, AF10)>, /* ULPI_D4> */
+ <STM32_PINMUX('B', 12, AF10)>, /* ULPI_D5> */
+ <STM32_PINMUX('B', 13, AF10)>, /* ULPI_D6> */
+ <STM32_PINMUX('B', 5, AF10)>; /* ULPI_D7> */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <2>;
+ };
+ };
};
};
};
diff --git a/arch/arm/boot/dts/stm32h743i-eval.dts b/arch/arm/boot/dts/stm32h743i-eval.dts
index 9f0e72c..1c615f6 100644
--- a/arch/arm/boot/dts/stm32h743i-eval.dts
+++ b/arch/arm/boot/dts/stm32h743i-eval.dts
@@ -68,6 +68,14 @@
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
+
+ usbotg_hs_phy: usb-phy {
+ #phy-cells = <0>;
+ compatible = "usb-nop-xceiv";
+ clocks = <&rcc USB1ULPI_CK>;
+ clock-names = "main_clk";
+ };
+
};

&adc_12 {
@@ -90,3 +98,11 @@
status = "okay";
};

+&usbotg_hs {
+ pinctrl-0 = <&usbotg_hs_pins_a>;
+ pinctrl-names = "default";
+ phys = <&usbotg_hs_phy>;
+ phy-names = "usb2-phy";
+ dr_mode = "otg";
+ status = "okay";
+};
--
2.7.4