[PATCH v7 0/2] irqchip: qcom: add support for PDC interrupt controller

[Lina Iyer]

Changes since v6:
- Code clean up as suggested by Thomas
- Rebased on top of 4.16-rc1

On newer Qualcomm Techonologies Inc's SoCs like the SDM845, the GIC is in a
power domain that can be powered off when not needed. Interrupts that need to
be sensed even when the GIC is powered off, are routed through an interrupt
controller in an always-on domain called the Power Domain Controller a.k.a PDC.
This series adds support for the PDC's interrupt controller.

Please consider reviewing these patches.

RFC v1: https://patchwork.kernel.org/patch/10180857/
RFC v2: https://www.mail-archive.com/linux-kernel@xxxxxxxxxxxxxxx/msg1600634.html
v3: https://lkml.org/lkml/2018/2/6/595
v4: https://www.spinics.net/lists/linux-arm-msm/msg32906.html
v5: https://www.mail-archive.com/linux-kernel@xxxxxxxxxxxxxxx/msg1605500.html
v6: https://lkml.org/lkml/2018/2/9/545

Lina Iyer (2):
  drivers: irqchip: pdc: Add PDC interrupt controller for QCOM SoCs
  dt-bindings/interrupt-controller: pdc: describe PDC device binding

 .../bindings/interrupt-controller/qcom,pdc.txt     |  78 ++++++
 drivers/irqchip/Kconfig                            |   9 +
 drivers/irqchip/Makefile                           |   1 +
 drivers/irqchip/qcom-pdc.c                         | 311 +++++++++++++++++++++
 4 files changed, 399 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt
 create mode 100644 drivers/irqchip/qcom-pdc.c

--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project