[PATCH] scsi: qla2xxx: Fix braces styling issue
From: John Pittman
Date: Sat Feb 24 2018 - 16:49:15 EST
In several spots throughout qla2xxx, checkpatch.pl has detected
braces being used to contain single statements. Remove braces to
maintain consistency with the guidelines presented in section 3 of
coding-style.rst.
Signed-off-by: John Pittman <jpittman@xxxxxxxxxx>
---
drivers/scsi/qla2xxx/qla_init.c | 21 +++++++--------------
drivers/scsi/qla2xxx/qla_mbx.c | 12 ++++--------
drivers/scsi/qla2xxx/qla_mr.c | 3 +--
drivers/scsi/qla2xxx/qla_os.c | 12 ++++--------
drivers/scsi/qla2xxx/qla_target.c | 3 +--
drivers/scsi/qla2xxx/qla_tmpl.c | 12 ++++--------
6 files changed, 21 insertions(+), 42 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 2dea112..25a314f 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -3046,9 +3046,8 @@ qla81xx_mpi_sync(scsi_qla_host_t *vha)
dw &= ~MPS_MASK;
dw |= dc;
rval = qla2x00_write_ram_word(vha, 0x7a15, dw);
- if (rval != QLA_SUCCESS) {
+ if (rval != QLA_SUCCESS)
ql_log(ql_log_warn, vha, 0x0114, "Unable to gain sync.\n");
- }
done_release:
rval = qla2x00_write_ram_word(vha, 0x7c00, 0);
@@ -3824,9 +3823,8 @@ qla2x00_fw_ready(scsi_qla_host_t *vha)
* Firmware should take at most one RATOV to login, plus 5 seconds for
* our own processing.
*/
- if ((wait_time = (ha->retry_count*ha->login_timeout) + 5) < min_wait) {
+ if ((wait_time = (ha->retry_count*ha->login_timeout) + 5) < min_wait)
wait_time = min_wait;
- }
/* Min wait time if loop down */
mtime = jiffies + (min_wait * HZ);
@@ -3843,9 +3841,8 @@ qla2x00_fw_ready(scsi_qla_host_t *vha)
memset(state, -1, sizeof(state));
rval = qla2x00_get_firmware_state(vha, state);
if (rval == QLA_SUCCESS) {
- if (state[0] < FSTATE_LOSS_OF_SYNC) {
+ if (state[0] < FSTATE_LOSS_OF_SYNC)
vha->device_flags &= ~DFLG_NO_CABLE;
- }
if (IS_QLA84XX(ha) && state[0] != FSTATE_READY) {
ql_dbg(ql_dbg_taskm, vha, 0x801f,
"fw_state=%x 84xx=%x.\n", state[0],
@@ -4665,9 +4662,8 @@ qla2x00_configure_loop(scsi_qla_host_t *vha)
if (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) {
if (test_bit(LOCAL_LOOP_UPDATE, &save_flags))
set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags);
- if (test_bit(RSCN_UPDATE, &save_flags)) {
+ if (test_bit(RSCN_UPDATE, &save_flags))
set_bit(RSCN_UPDATE, &vha->dpc_flags);
- }
}
return (rval);
@@ -5379,9 +5375,8 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha)
new_fcport->port_name);
}
- if (swl[swl_idx].d_id.b.rsvd_1 != 0) {
+ if (swl[swl_idx].d_id.b.rsvd_1 != 0)
last_dev = 1;
- }
swl_idx++;
}
} else {
@@ -5647,9 +5642,8 @@ qla2x00_fabric_login(scsi_qla_host_t *vha, fc_port_t *fcport,
rval = ha->isp_ops->fabric_login(vha, fcport->loop_id,
fcport->d_id.b.domain, fcport->d_id.b.area,
fcport->d_id.b.al_pa, mb, BIT_0);
- if (rval != QLA_SUCCESS) {
+ if (rval != QLA_SUCCESS)
return rval;
- }
if (mb[0] == MBS_PORT_ID_USED) {
/*
* Device has another loop ID. The firmware team
@@ -5687,9 +5681,8 @@ qla2x00_fabric_login(scsi_qla_host_t *vha, fc_port_t *fcport,
fcport->port_type = FCT_INITIATOR;
} else {
fcport->port_type = FCT_TARGET;
- if (mb[1] & BIT_1) {
+ if (mb[1] & BIT_1)
fcport->flags |= FCF_FCP2_DEVICE;
- }
}
if (mb[10] & BIT_0)
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 7397aed..3bd00d6 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -1498,9 +1498,8 @@ qla2x00_lun_reset(struct fc_port *fcport, uint64_t l, int tag)
mcp->tov = MBX_TOV_SECONDS;
mcp->flags = 0;
rval = qla2x00_mailbox_command(vha, mcp);
- if (rval != QLA_SUCCESS) {
+ if (rval != QLA_SUCCESS)
ql_dbg(ql_dbg_mbx, vha, 0x1043, "Failed=%x.\n", rval);
- }
/* Issue marker IOCB. */
rval2 = qla2x00_marker(vha, req, rsp, fcport->loop_id, l,
@@ -4026,9 +4025,8 @@ qla2x00_send_change_request(scsi_qla_host_t *vha, uint16_t format,
rval = qla2x00_mailbox_command(vha, mcp);
if (rval == QLA_SUCCESS) {
- if (mcp->mb[0] != MBS_COMMAND_COMPLETE) {
+ if (mcp->mb[0] != MBS_COMMAND_COMPLETE)
rval = BIT_1;
- }
} else
rval = BIT_1;
@@ -4107,9 +4105,8 @@ qla84xx_verify_chip(struct scsi_qla_host *vha, uint16_t *status)
"Entered %s.\n", __func__);
mn = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &mn_dma);
- if (mn == NULL) {
+ if (mn == NULL)
return QLA_MEMORY_ALLOC_FAILED;
- }
/* Force Update? */
options = ha->cs84xx->fw_update ? VCO_FORCE_UPDATE : 0;
@@ -4960,9 +4957,8 @@ qla2x00_echo_test(scsi_qla_host_t *vha, struct msg_echo_lb *mreq,
mcp->mb[0] = MBC_DIAGNOSTIC_ECHO;
/* BIT_6 specifies 64bit address */
mcp->mb[1] = mreq->options | BIT_15 | BIT_6;
- if (IS_CNA_CAPABLE(ha)) {
+ if (IS_CNA_CAPABLE(ha))
mcp->mb[2] = vha->fcoe_fcf_idx;
- }
mcp->mb[16] = LSW(mreq->rcv_dma);
mcp->mb[17] = MSW(mreq->rcv_dma);
mcp->mb[6] = LSW(MSD(mreq->rcv_dma));
diff --git a/drivers/scsi/qla2xxx/qla_mr.c b/drivers/scsi/qla2xxx/qla_mr.c
index d5da398..2f84462 100644
--- a/drivers/scsi/qla2xxx/qla_mr.c
+++ b/drivers/scsi/qla2xxx/qla_mr.c
@@ -3298,9 +3298,8 @@ qlafx00_fxdisc_iocb(srb_t *sp, struct fxdisc_entry_fx00 *pfxiocb)
cpu_to_le32(fxio->u.fxiocb.rsp_len);
}
- if (fxio->u.fxiocb.flags & SRB_FXDISC_REQ_DWRD_VALID) {
+ if (fxio->u.fxiocb.flags & SRB_FXDISC_REQ_DWRD_VALID)
fx_iocb.dataword = fxio->u.fxiocb.req_data;
- }
fx_iocb.flags = fxio->u.fxiocb.flags;
} else {
struct scatterlist *sg;
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index afcb5567..3fadd0e 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1078,9 +1078,8 @@ qla2x00_eh_wait_on_command(struct scsi_cmnd *cmd)
return ret;
}
- while (CMD_SP(cmd) && wait_iter--) {
+ while (CMD_SP(cmd) && wait_iter--)
msleep(ABORT_POLLING_PERIOD);
- }
if (CMD_SP(cmd))
ret = QLA_FUNCTION_FAILED;
@@ -1409,9 +1408,8 @@ __qla2xxx_eh_generic_reset(char *name, enum nexus_wait_type type,
fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
int err;
- if (!fcport) {
+ if (!fcport)
return FAILED;
- }
err = fc_block_scsi_eh(cmd);
if (err != 0)
@@ -1522,9 +1520,8 @@ qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd)
id = cmd->device->id;
lun = cmd->device->lun;
- if (!fcport) {
+ if (!fcport)
return ret;
- }
ret = fc_block_scsi_eh(cmd);
if (ret != 0)
@@ -1667,9 +1664,8 @@ qla2x00_loop_reset(scsi_qla_host_t *vha)
struct fc_port *fcport;
struct qla_hw_data *ha = vha->hw;
- if (IS_QLAFX00(ha)) {
+ if (IS_QLAFX00(ha))
return qlafx00_loop_reset(vha);
- }
if (ql2xtargetreset == 1 && ha->flags.enable_target_reset) {
list_for_each_entry(fcport, &vha->vp_fcports, list) {
diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c
index 896b2d8..2f1507c 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -3112,9 +3112,8 @@ int qlt_xmit_response(struct qla_tgt_cmd *cmd, int xmit_type,
res = qlt_pre_xmit_response(cmd, &prm, xmit_type, scsi_status,
&full_req_cnt);
- if (unlikely(res != 0)) {
+ if (unlikely(res != 0))
return res;
- }
spin_lock_irqsave(qpair->qp_lock_ptr, flags);
diff --git a/drivers/scsi/qla2xxx/qla_tmpl.c b/drivers/scsi/qla2xxx/qla_tmpl.c
index 731ca0d..d3d089f 100644
--- a/drivers/scsi/qla2xxx/qla_tmpl.c
+++ b/drivers/scsi/qla2xxx/qla_tmpl.c
@@ -141,9 +141,8 @@ qla27xx_read8(void __iomem *window, void *buf, ulong *len)
{
uint8_t value = ~0;
- if (buf) {
+ if (buf)
value = RD_REG_BYTE(window);
- }
qla27xx_insert32(value, buf, len);
}
@@ -152,9 +151,8 @@ qla27xx_read16(void __iomem *window, void *buf, ulong *len)
{
uint16_t value = ~0;
- if (buf) {
+ if (buf)
value = RD_REG_WORD(window);
- }
qla27xx_insert32(value, buf, len);
}
@@ -163,9 +161,8 @@ qla27xx_read32(void __iomem *window, void *buf, ulong *len)
{
uint32_t value = ~0;
- if (buf) {
+ if (buf)
value = RD_REG_DWORD(window);
- }
qla27xx_insert32(value, buf, len);
}
@@ -192,9 +189,8 @@ qla27xx_write_reg(__iomem struct device_reg_24xx *reg,
{
__iomem void *window = (void __iomem *)reg + offset;
- if (buf) {
+ if (buf)
WRT_REG_DWORD(window, data);
- }
}
static inline void
--
2.7.5