Re: [PATCH 08/15] drm/sun4i: Fix polarity configuration for DW HDMI PHY

[Maxime Ripard]

Hi,

On Sat, Feb 24, 2018 at 10:45:38PM +0100, Jernej Skrabec wrote:
> Current polarity configuration code is cleary wrong since it compares
> same flag two times. However, even if flag name is fixed, it won't work
> well for resolutions which have one polarity positive and another
> negative.
> 
> Fix that by properly set each bit according to each polarity. Since
> those two bits are not described in any documentation, relationships
> were obtained by experimentation.
> 
> Fixes: b7c7436a5ff0 ("drm/sun4i: Implement A83T HDMI driver")
> 
> Signed-off-by: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
> ---
>  drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 9 +++++----
>  1 file changed, 5 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
> index e5bfcdd43ec9..f48e8b70fabe 100644
> --- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
> +++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
> @@ -35,10 +35,11 @@ static int sun8i_hdmi_phy_config(struct dw_hdmi *hdmi, void *data,
>  	struct sun8i_hdmi_phy *phy = (struct sun8i_hdmi_phy *)data;
>  	u32 val = 0;
>  
> -	if ((mode->flags & DRM_MODE_FLAG_NHSYNC) &&
> -	    (mode->flags & DRM_MODE_FLAG_NHSYNC)) {
> -		val = 0x03;
> -	}
> +	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
> +		val |= 0x01;
> +
> +	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
> +		val |= 0x02;

Can you introduce defines for those?

Thanks!
Maxime

-- 
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com

Attachment: signature.asc
Description: PGP signature