Re: [PATCH] eeprom: New ee1004 driver for DDR4 memory

[Bartosz Golaszewski]

2018-02-26 10:20 GMT+01:00 Jean Delvare <jdelvare@xxxxxxx>:
> The EEPROMs which hold the SPD data on DDR4 memory modules are no
> longer standard AT24C02-compatible EEPROMs. They are 512-byte EEPROMs
> which use only 1 I2C address for data access. You need to switch
> between the lower page and the upper page of data by sending commands
> on the SMBus.
>
> Signed-off-by: Jean Delvare <jdelvare@xxxxxxx>
> ---
>  drivers/misc/eeprom/Kconfig  |   11 +
>  drivers/misc/eeprom/Makefile |    1
>  drivers/misc/eeprom/ee1004.c |  281 +++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 293 insertions(+)
>

Hi Jean,

is there any reason not to use regmap as is done currently in at24? It
would spare you a lot of code.

Best regards,
Bartosz Golaszewski