Re: [PATCH 0/8] R-Car M3-N: Enable EtherAVB device node

[jacopo mondi]

Hi Geert,

On Mon, Feb 26, 2018 at 07:28:47PM +0100, Geert Uytterhoeven wrote:
> Hi Jacopo,
>
> On Mon, Feb 26, 2018 at 6:57 PM, Jacopo Mondi <jacopo+renesas@xxxxxxxxxx> wrote:
> >   as discussed with you Sergei and Geert, in order to enable EtherAVB for
> > R8A77965 we first wanted to make the phy-mode "rgmii-txid" a board specific
> > property for all other SoCs.
>
> Thanks for your series!
>
> > This series adds  the phy-mode property to salvator-common.dtsi and reset the
> > one for R8A77965/R8A7796/R8A77995 to "rgmii".
>
> I forgot that r8a7795.dtsi and r8a7796.dtsi are used for the ULCB boards, too.
> So to avoid regressions, you need to make a similar change to ulcb.dtsi like you
> made for salvator-common.dtsi.
>
> In addition, r8a77995.dtsi is only used for the Draak board.
> So you have to update r8a7795-draak.dtsi first, too.

Of course! I forgot about ULCB (and had a patch for Draak I lost while
rebasing :/ )
>
> > Then, in order to enable EtherAVB for R-Car M3-N, iommu nodes had to be added
> > as they are referenced by the "avb" device node (CC the iommu list for the
> > series for that reason).
>
> I don't think we need the iommu properties and nodes at this early stage.
> Ethernet works fine without them. Simon, do you agree?

I'll wait for Simon reply and then resend, possibly without iommu and
ULCB and Draak patches!

Thanks
   j

>
> P.S. scripts/dtc/dtx_diff is a great tool to compare DTBs before and after your
>       changes. It would have revealed the changes for ULCB and Draak.
>
> Gr{oetje,eeting}s,
>
>                         Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
>                                 -- Linus Torvalds