[PATCH v3 3/3] PCI: designware-ep: Return an error when requesting a too large BAR size

[Niklas Cassel]

pci_epc_set_bar() can be called with flag PCI_BASE_ADDRESS_MEM_TYPE_64,
and can thus request a BAR size larger than 4 GB.

However, the pcie-designware-ep.c driver currently doesn't handle
BAR sizes larger than 4 GB. (Since we are only writing the BAR_mask[x]
register and not the BAR_mask[x+1] register.)

For now, return an error when requesting a BAR size larger than 4 GB.

Signed-off-by: Niklas Cassel <niklas.cassel@xxxxxxxx>
---
 drivers/pci/dwc/pcie-designware-ep.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/pci/dwc/pcie-designware-ep.c b/drivers/pci/dwc/pcie-designware-ep.c
index 3a6feeff5f5b..efb65a7c06b8 100644
--- a/drivers/pci/dwc/pcie-designware-ep.c
+++ b/drivers/pci/dwc/pcie-designware-ep.c
@@ -126,6 +126,11 @@ static int dw_pcie_ep_set_bar(struct pci_epc *epc, u8 func_no,
 	enum dw_pcie_as_type as_type;
 	u32 reg = PCI_BASE_ADDRESS_0 + (4 * bar);
 
+	if (upper_32_bits(size)) {
+		dev_err(pci->dev, "can't handle BAR larger than 4GB\n");
+		return -EINVAL;
+	}
+
 	if (!(flags & PCI_BASE_ADDRESS_SPACE))
 		as_type = DW_PCIE_AS_MEM;
 	else
-- 
2.14.2