Re: [PATCH] mmc: sdhci-of-arasan: Add quirk to avoid erroneous msg

From: Shawn Lin
Date: Tue Feb 27 2018 - 09:42:32 EST


On 2018/2/27 22:31, Phil Edworthy wrote:
Hi Shawn,

On 27 February 2018 14:28, Shawn Lin wrote:
在 2018/2/27 21:55, Phil Edworthy 写道:
Since the controller does not support the end-of-busy IRQ, don't use it.
Otherwise, on older SD cards you will get lots of these messages:
"mmc0: Got data interrupt 0x00000002 even though no data operation was
in progress"


I'm afraid you have to explain which version of arasan's IP suffer from this
and what does the "older SD cards" mean?
Ok, I'll try to find out the IP version...
For "older SD cards", I can provide a list of a few cards that exhibit this problem
and others that don't, is that enough info?

What I meant is could you elaborate more about what kind of cards, e.g,
are them the legacy SDSC cards or SDHC cards, or maybe they are only
running with defaut speed? or whatever, but not just with a vague
"older" cards. :)


Thanks
Phil

This has been reported on Xilinx devices that also use the Arasan IP.
See https://patchwork.kernel.org/patch/8062871/

This has been tested on the Renesas RZ/ND-DB board with the RZ/N1 SoC.

Signed-off-by: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
---
drivers/mmc/host/sdhci-of-arasan.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-of-arasan.c
b/drivers/mmc/host/sdhci-of-arasan.c
index c33a5f7..ab66e32 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -290,7 +290,8 @@ static const struct sdhci_pltfm_data
sdhci_arasan_pdata = {
.ops = &sdhci_arasan_ops,
.quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
- SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN,
+ SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN |
+ SDHCI_QUIRK2_STOP_WITH_TC,
};

static u32 sdhci_arasan_cqhci_irq(struct sdhci_host *host, u32
intmask)



--
Best Regards
Shawn Lin






--
Best Regards
Shawn Lin