Re: [PATCH v4] mmc: dw_mmc: Fix the DTO/CTO timeout overflow calculation for 32-bit systems
From: Andy Shevchenko
Date: Wed Feb 28 2018 - 10:47:57 EST
On Wed, Feb 28, 2018 at 1:53 PM, Evgeniy Didin
<Evgeniy.Didin@xxxxxxxxxxxx> wrote:
> In commit 9d9491a7da2a ("mmc: dw_mmc: Fix the DTO timeout calculation") and
> commit 4c2357f57dd5 ("mmc: dw_mmc: Fix the CTO timeout calculation")
> have been made changes which cause multiply overflow for 32-bit systems.
> The broken timeout calculations leads to unexpected ETIMEDOUT errors and
> causes stacktrace splat (such as below) during normal data exchange
> with SD-card.
>
> | Running : 4M-check-reassembly-tcp-cmykw2-rotatew2.out -v0 -w1
> | - Info: Finished target initialization.
> | mmcblk0: error -110 transferring data, sector 320544, nr 2048, cmd response
> | 0x900, card status 0x0
>
> DIV_ROUND_UP_ULL helps to escape usage of __udivdi3() from libgcc and so
> code gets compiled on all 32-bit platforms as opposed to usage
> of DIV_ROUND_UP when we may only compile stuff on a very few arches.
>
> Lets cast this multiply to u64 type which prevents overflow.
>
FWIW,
Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
> Tested-by: Vineet Gupta <Vineet.Gupta1@xxxxxxxxxxxx>
> Reported-by: Vineet Gupta <Vineet.Gupta1@xxxxxxxxxxxx> # ARC STAR 9001306872 HSDK, sdio: board crashes when copying big files
> Fixes: 9d9491a7da2a ("mmc: dw_mmc: Fix the DTO timeout calculation")
> Fixes: 4c2357f57dd5 ("mmc: dw_mmc: Fix the CTO timeout calculation")
>
> Signed-off-by: Evgeniy Didin <Evgeniy.Didin@xxxxxxxxxxxx>
>
> CC: Alexey Brodkin <abrodkin@xxxxxxxxxxxx>
> CC: Eugeniy Paltsev <paltsev@xxxxxxxxxxxx>
> CC: Douglas Anderson <dianders@xxxxxxxxxxxx>
> CC: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
> CC: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
> CC: Jisheng Zhang <Jisheng.Zhang@xxxxxxxxxxxxx>
> CC: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
> CC: Vineet Gupta <Vineet.Gupta1@xxxxxxxxxxxx>
> CC: linux-kernel@xxxxxxxxxxxxxxx
> CC: linux-snps-arc@xxxxxxxxxxxxxxxxxxx
> Cc: <stable@xxxxxxxxxxxxxxx>
> ---
> Changes since v3:
> -Switch DIV_ROUND_UP macro to DIV_ROUND_UP_ULL
> -Make one patch from two patches
> -Modify commit message
>
> Changes sinve v2:
> -add fix for cto_ms
>
> Changes since v1:
> -uint64_t switched to u64
>
> drivers/mmc/host/dw_mmc.c | 9 ++++++---
> 1 file changed, 6 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index 0aa39975f33b..cba534d4c81b 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -409,7 +409,9 @@ static inline void dw_mci_set_cto(struct dw_mci *host)
> cto_div = (mci_readl(host, CLKDIV) & 0xff) * 2;
> if (cto_div == 0)
> cto_div = 1;
> - cto_ms = DIV_ROUND_UP(MSEC_PER_SEC * cto_clks * cto_div, host->bus_hz);
> +
> + cto_ms = DIV_ROUND_UP_ULL((u64)MSEC_PER_SEC * cto_clks * cto_div,
> + host->bus_hz);
>
> /* add a bit spare time */
> cto_ms += 10;
> @@ -1944,8 +1946,9 @@ static void dw_mci_set_drto(struct dw_mci *host)
> drto_div = (mci_readl(host, CLKDIV) & 0xff) * 2;
> if (drto_div == 0)
> drto_div = 1;
> - drto_ms = DIV_ROUND_UP(MSEC_PER_SEC * drto_clks * drto_div,
> - host->bus_hz);
> +
> + drto_ms = DIV_ROUND_UP_ULL((u64)MSEC_PER_SEC * drto_clks * drto_div,
> + host->bus_hz);
>
> /* add a bit spare time */
> drto_ms += 10;
> --
> 2.11.0
>
--
With Best Regards,
Andy Shevchenko