[PATCH v2 1/2] dt-bindings: stm32: Add bindings for Extended TrustZone Protection
From: Benjamin Gaignard
Date: Thu Mar 01 2018 - 08:58:36 EST
Extended TrustZone Protection driver is very basic and only needs
to know where are the registers (no clock, no interrupt)
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
---
.../bindings/arm/stm32/st,stm32mp1-etzpc.txt | 25 ++++++++++++++++++++++
1 file changed, 25 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/stm32/st,stm32mp1-etzpc.txt
diff --git a/Documentation/devicetree/bindings/arm/stm32/st,stm32mp1-etzpc.txt b/Documentation/devicetree/bindings/arm/stm32/st,stm32mp1-etzpc.txt
new file mode 100644
index 000000000000..9407e37f7d15
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/stm32/st,stm32mp1-etzpc.txt
@@ -0,0 +1,25 @@
+STMicroelectronics STM32 Extended TrustZone Protection driver
+
+Required properties:
+ - compatible : value should be "st,stm32mp1-etzpc"
+ - reg : physical base address of the IP registers and length of memory
+ mapped region.
+ - protected-devices: list of phandle of devices protected by etzpc.
+ Because etzpc driver rely on the phandle index in
+ the list, holes must be filled with a disabled node.
+
+Example for stm32mp1:
+
+reserved: disabled_node {
+ status = "disabled";
+};
+
+etzpc: etzpc@5c007000 {
+ compatible = "st,stm32mp1-etzpc";
+ reg = <0x5c007000 0x400>;
+ protected-devices = <&usart1>,
+ <&spi6>,
+ <&i2c4>,
+ <&reserved>,
+ <&rng1>;
+};
--
2.15.0