[PATCH v2 0/2] Introduce STM32 USB PHY Controller driver

[Amelie Delaunay]

This patchset adds support for STMicroelectronics STM32 USB PHY Controller
(USBPHYC) which is embedded in STM32MP1 SoC.
The STM32 USBPHYC block contains a dual port High Speed UTMI+ PHY and a UTMI
switch that selects either USB OTG controller or USB Host controller for the
second PHY port.

---
Changes in v2:
* Update diagram to better describe the context.
* Change boolean dt propery st,port2-switch-to-host into u32 st,utmi-switch.
* Silent phy creation failure in case of -EPROBE_DEFER.


Amelie Delaunay (2):
  dt-bindings: phy: add support for STM32 USB PHY Controller (USBPHYC)
  phy: stm32: add support for STM32 USB PHY Controller (USBPHYC)

 .../devicetree/bindings/phy/phy-stm32-usbphyc.txt  |  46 +++
 drivers/phy/st/Kconfig                             |  14 +
 drivers/phy/st/Makefile                            |   1 +
 drivers/phy/st/phy-stm32-usbphyc.c                 | 382 +++++++++++++++++++++
 4 files changed, 443 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.txt
 create mode 100644 drivers/phy/st/phy-stm32-usbphyc.c

-- 
2.7.4