RE: [PATCH V5 2/2] thermal: imx: add i.MX7 thermal sensor support
From: Anson Huang
Date: Thu Mar 01 2018 - 21:03:23 EST
Anson Huang
Best Regards!
> -----Original Message-----
> From: Rob Herring [mailto:robh@xxxxxxxxxx]
> Sent: Friday, March 2, 2018 5:23 AM
> To: Anson Huang <anson.huang@xxxxxxx>
> Cc: Leonard Crestez <leonard.crestez@xxxxxxx>; rui.zhang@xxxxxxxxx;
> edubezval@xxxxxxxxx; mark.rutland@xxxxxxx; shawnguo@xxxxxxxxxx;
> kernel@xxxxxxxxxxxxxx; Fabio Estevam <fabio.estevam@xxxxxxx>;
> linux@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; dl-linux-imx <linux-imx@xxxxxxx>;
> linux-kernel@xxxxxxxxxxxxxxx; linux-pm@xxxxxxxxxxxxxxx
> Subject: Re: [PATCH V5 2/2] thermal: imx: add i.MX7 thermal sensor support
>
> On Thu, Mar 01, 2018 at 07:09:40AM +0800, Anson Huang wrote:
> > This patch adds i.MX7 thermal sensor support, most of the i.MX7
> > thermal sensor functions are same with
> > i.MX6 except the registers offset/layout, so we move those registers
> > offset/layout definitions to soc data structure.
> >
> > i.MX7 uses single calibration data @25C, the calibration data is
> > located at OCOTP offset 0x4F0, bit[17:9], the formula is as below:
> >
> > Tmeas = (Nmeas - n1) + 25; n1 is the fuse value for 25C.
> >
> > Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
> > Signed-off-by: Bai Ping <ping.bai@xxxxxxx>
> > Acked-by: Dong Aisheng <aisheng.dong@xxxxxxx>
> > Acked-by: Shawn Guo <shawnguo@xxxxxxxxxx>
> > ---
> > changes since V4:
> > drop direct OCOTP register access for i.mx7d since it is a new added
> platform,
> > only support reading ocotp values through the ocotp nvmem driver which
> handles clock.
> > .../devicetree/bindings/thermal/imx-thermal.txt | 9 +-
> > drivers/thermal/imx_thermal.c | 295
> ++++++++++++++++-----
> > 2 files changed, 239 insertions(+), 65 deletions(-)
>
> Please add ack/reviewed-by's when posting new versions.
>
> Rob
Sorry for missing it, I just sent out a V6 adding Reviewed-by, thanks.
Anson.