Re: [PATCH v5 1/6] dt-bindings: add bindings for USB physical connector

[Heikki Krogerus]

Hi,

On Tue, Feb 27, 2018 at 08:11:29AM +0100, Andrzej Hajda wrote:
> +2. USB-C connector attached to CC controller (s2mm005), HS lines routed
> +to companion PMIC (max77865), SS lines to USB3 PHY and SBU to DisplayPort.
> +DisplayPort video lines are routed to the connector via SS mux in USB3 PHY.
> +
> +ccic: s2mm005@33 {
> +	...
> +	usb_con: connector {
> +		compatible = "usb-c-connector";
> +		label = "USB-C";

Is this child node really necessary? There will never be more then
one connector per CC line.

We should prefer device_graph* functions over of_graph* and
acpi_graph* functions in the drivers so we don't have to handle the
same thing multiple times with separate APIs. Is it still possible if
there is that connector child node?

> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port@0 {
> +				reg = <0>;
> +				usb_con_hs: endpoint {
> +					remote-endpoint = <&max77865_usbc_hs>;
> +				};
> +			};
> +			port@1 {
> +				reg = <1>;
> +				usb_con_ss: endpoint {
> +					remote-endpoint = <&usbdrd_phy_ss>;
> +				};
> +			};
> +			port@2 {
> +				reg = <2>;
> +				usb_con_sbu: endpoint {
> +					remote-endpoint = <&dp_aux>;
> +				};
> +			};
> +		};
> +	};
> +};


Thanks,

-- 
heikki