Re: [PATCH v2 8/8] arm64: zynqmp: Add support for Xilinx zc1751

From: Rob Herring
Date: Fri Mar 02 2018 - 13:12:38 EST

Next message: Rob Herring: "Re: [PATCH v2 1/5] arm: zynq: Add Xilinx cc108 board"
Previous message: Marc-AndrÃ Lureau: "Re: [PATCH v16 09/11] crash: export paddr_vmcoreinfo_note()"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Fri, Feb 23, 2018 at 03:40:30PM +0100, Michal Simek wrote:
> Xilinx zc1751 boards is used for silicon validation. Board can be
> extended with 5 FMCs/DCs cards to connect various IPs. Describe all
> these combinations.
>
> Signed-off-by: Michal Simek <michal.simek@xxxxxxxxxx>
> ---
>
> Changes in v2:
> - Record compatible string to xilinx.txt
>
> Documentation/devicetree/bindings/arm/xilinx.txt | 3 +
> arch/arm64/boot/dts/xilinx/Makefile | 5 +
> .../boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts | 133 +++++++++++++++
> .../boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts | 170 +++++++++++++++++++
> .../boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts | 153 +++++++++++++++++
> .../boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts | 181 +++++++++++++++++++++
> .../boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts | 126 ++++++++++++++
> 7 files changed, 771 insertions(+)
> create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
> create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
> create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
> create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts
> create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts
>
> diff --git a/Documentation/devicetree/bindings/arm/xilinx.txt b/Documentation/devicetree/bindings/arm/xilinx.txt
> index aceccf2bf43b..0cf6fb61631d 100644
> --- a/Documentation/devicetree/bindings/arm/xilinx.txt
> +++ b/Documentation/devicetree/bindings/arm/xilinx.txt
> @@ -28,6 +28,9 @@ Additional compatible strings:
> - Xilinx internal board zc1275
> "xlnx,zynqmp-zc1275-revA", "xlnx,zynqmp-zc1275"
>
> +- Xilinx internal board zc1751
> + "xlnx,zynqmp-zc1751"
> +
> - Xilinx 96boards compatible board zcu100
> "xlnx,zynqmp-zcu100-revC", "xlnx,zynqmp-zcu100"
>
> diff --git a/arch/arm64/boot/dts/xilinx/Makefile b/arch/arm64/boot/dts/xilinx/Makefile
> index bdda451afaad..c2a0c00272e2 100644
> --- a/arch/arm64/boot/dts/xilinx/Makefile
> +++ b/arch/arm64/boot/dts/xilinx/Makefile
> @@ -3,6 +3,11 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-ep108.dtb
> dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1232-revA.dtb
> dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1254-revA.dtb
> dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1275-revA.dtb
> +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm015-dc1.dtb
> +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm016-dc2.dtb
> +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm017-dc3.dtb
> +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm018-dc4.dtb
> +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm019-dc5.dtb
> dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu100-revC.dtb
> dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-revA.dtb
> dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-revB.dtb
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
> new file mode 100644
> index 000000000000..41f9e987c559
> --- /dev/null
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
> @@ -0,0 +1,133 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * dts file for Xilinx ZynqMP zc1751-xm015-dc1
> + *
> + * (C) Copyright 2015 - 2018, Xilinx, Inc.
> + *
> + * Michal Simek <michal.simek@xxxxxxxxxx>
> + */
> +
> +/dts-v1/;
> +
> +#include "zynqmp.dtsi"
> +#include "zynqmp-clk.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> + model = "ZynqMP zc1751-xm015-dc1 RevA";
> + compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
> +
> + aliases {
> + ethernet0 = &gem3;
> + gpio0 = &gpio;
> + i2c0 = &i2c1;
> + mmc0 = &sdhci0;
> + mmc1 = &sdhci1;
> + rtc0 = &rtc;
> + serial0 = &uart0;
> + usb0 = &usb0;

Same alias comments.

> + };
> +
> + chosen {
> + bootargs = "earlycon";
> + stdout-path = "serial0:115200n8";
> + };
> +
> + memory@0 {
> + device_type = "memory";
> + reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
> + };
> +};
> +
> +&fpd_dma_chan1 {
> + status = "okay";
> +};
> +
> +&fpd_dma_chan2 {
> + status = "okay";
> +};
> +
> +&fpd_dma_chan3 {
> + status = "okay";
> +};
> +
> +&fpd_dma_chan4 {
> + status = "okay";
> +};
> +
> +&fpd_dma_chan5 {
> + status = "okay";
> +};
> +
> +&fpd_dma_chan6 {
> + status = "okay";
> +};
> +
> +&fpd_dma_chan7 {
> + status = "okay";
> +};
> +
> +&fpd_dma_chan8 {
> + status = "okay";
> +};
> +
> +&gem3 {
> + status = "okay";
> + phy-handle = <&phy0>;
> + phy-mode = "rgmii-id";
> + phy0: phy@0 {
> + reg = <0>;
> + };
> +};
> +
> +&gpio {
> + status = "okay";
> +};
> +
> +
> +&i2c1 {
> + status = "okay";
> + clock-frequency = <400000>;
> +
> + eeprom: eeprom@55 {
> + compatible = "atmel,24c64"; /* 24AA64 */
> + reg = <0x55>;
> + };
> +};
> +
> +&rtc {
> + status = "okay";
> +};
> +
> +&sata {
> + status = "okay";
> + /* SATA phy OOB timing settings */
> + ceva,p0-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
> + ceva,p0-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
> + ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
> + ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
> + ceva,p1-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
> + ceva,p1-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
> + ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
> + ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
> +};
> +
> +/* eMMC */
> +&sdhci0 {
> + status = "okay";
> + bus-width = <8>;
> +};
> +
> +/* SD1 with level shifter */
> +&sdhci1 {
> + status = "okay";
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> +
> +/* ULPI SMSC USB3320 */
> +&usb0 {
> + status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
> new file mode 100644
> index 000000000000..c4d253cec526
> --- /dev/null
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
> @@ -0,0 +1,170 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * dts file for Xilinx ZynqMP zc1751-xm016-dc2
> + *
> + * (C) Copyright 2015 - 2018, Xilinx, Inc.
> + *
> + * Michal Simek <michal.simek@xxxxxxxxxx>
> + */
> +
> +/dts-v1/;
> +
> +#include "zynqmp.dtsi"
> +#include "zynqmp-clk.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> + model = "ZynqMP zc1751-xm016-dc2 RevA";
> + compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
> +
> + aliases {
> + can0 = &can0;
> + can1 = &can1;
> + ethernet0 = &gem2;
> + gpio0 = &gpio;
> + i2c0 = &i2c0;
> + rtc0 = &rtc;
> + serial0 = &uart0;
> + serial1 = &uart1;
> + spi0 = &spi0;
> + spi1 = &spi1;
> + usb0 = &usb1;
> + };
> +
> + chosen {
> + bootargs = "earlycon";
> + stdout-path = "serial0:115200n8";
> + };
> +
> + memory@0 {
> + device_type = "memory";
> + reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
> + };
> +};
> +
> +&can0 {
> + status = "okay";
> +};
> +
> +&can1 {
> + status = "okay";
> +};
> +
> +&fpd_dma_chan1 {
> + status = "okay";
> +};
> +
> +&fpd_dma_chan2 {
> + status = "okay";
> +};
> +
> +&fpd_dma_chan3 {
> + status = "okay";
> +};
> +
> +&fpd_dma_chan4 {
> + status = "okay";
> +};
> +
> +&fpd_dma_chan5 {
> + status = "okay";
> +};
> +
> +&fpd_dma_chan6 {
> + status = "okay";
> +};
> +
> +&fpd_dma_chan7 {
> + status = "okay";
> +};
> +
> +&fpd_dma_chan8 {
> + status = "okay";
> +};
> +
> +&gem2 {
> + status = "okay";
> + phy-handle = <&phy0>;
> + phy-mode = "rgmii-id";
> + phy0: phy@5 {
> + reg = <5>;
> + ti,rx-internal-delay = <0x8>;
> + ti,tx-internal-delay = <0xa>;
> + ti,fifo-depth = <0x1>;
> + };
> +};
> +
> +&gpio {
> + status = "okay";
> +};
> +
> +&i2c0 {
> + status = "okay";
> + clock-frequency = <400000>;
> +
> + tca6416_u26: gpio@20 {
> + compatible = "ti,tca6416";
> + reg = <0x20>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + /* IRQ not connected */
> + };
> +
> + rtc@68 {
> + compatible = "dallas,ds1339";
> + reg = <0x68>;
> + };
> +};
> +
> +&rtc {
> + status = "okay";
> +};
> +
> +&spi0 {
> + status = "okay";
> + num-cs = <1>;
> +
> + spi0_flash0: spi0_flash0@0 {

flash@0

> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "sst,sst25wf080", "jedec,spi-nor";
> + spi-max-frequency = <50000000>;
> + reg = <0>;
> +
> + spi0_flash0@0 {

Don't use underscores.

Also, this is a partition, right? Follow the partitions binding. For
example, there should be a "partitions" node. And the name should be
partition@0

> + label = "spi0_flash0";

This should be something that describes what is in the partition like
say "rootfs".

> + reg = <0x0 0x100000>;
> + };
> + };
> +};
> +
> +&spi1 {
> + status = "okay";
> + num-cs = <1>;
> +
> + spi1_flash0: spi1_flash0@0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "atmel,at45db041e", "atmel,at45", "atmel,dataflash";
> + spi-max-frequency = <20000000>;
> + reg = <0>;
> +
> + spi1_flash0@0 {
> + label = "spi1_flash0";
> + reg = <0x0 0x84000>;
> + };
> + };
> +};
> +
> +/* ULPI SMSC USB3320 */
> +&usb1 {
> + status = "okay";
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> +
> +&uart1 {
> + status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
> new file mode 100644
> index 000000000000..9f312ef0e061
> --- /dev/null
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
> @@ -0,0 +1,153 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * dts file for Xilinx ZynqMP zc1751-xm017-dc3
> + *
> + * (C) Copyright 2016 - 2018, Xilinx, Inc.
> + *
> + * Michal Simek <michal.simek@xxxxxxxxxx>
> + */
> +
> +/dts-v1/;
> +
> +#include "zynqmp.dtsi"
> +#include "zynqmp-clk.dtsi"
> +
> +/ {
> + model = "ZynqMP zc1751-xm017-dc3 RevA";
> + compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
> +
> + aliases {
> + ethernet0 = &gem0;
> + gpio0 = &gpio;
> + i2c0 = &i2c0;
> + i2c1 = &i2c1;
> + mmc0 = &sdhci1;
> + rtc0 = &rtc;
> + serial0 = &uart0;
> + serial1 = &uart1;
> + usb0 = &usb0;
> + usb1 = &usb1;
> + };
> +
> + chosen {
> + bootargs = "earlycon";
> + stdout-path = "serial0:115200n8";
> + };
> +
> + memory@0 {
> + device_type = "memory";
> + reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
> + };
> +};
> +
> +&fpd_dma_chan1 {
> + status = "okay";
> +};
> +
> +&fpd_dma_chan2 {
> + status = "okay";
> +};
> +
> +&fpd_dma_chan3 {
> + status = "okay";
> +};
> +
> +&fpd_dma_chan4 {
> + status = "okay";
> +};
> +
> +&fpd_dma_chan5 {
> + status = "okay";
> +};
> +
> +&fpd_dma_chan6 {
> + status = "okay";
> +};
> +
> +&fpd_dma_chan7 {
> + status = "okay";
> +};
> +
> +&fpd_dma_chan8 {
> + status = "okay";
> +};
> +
> +&gem0 {
> + status = "okay";
> + phy-handle = <&phy0>;
> + phy-mode = "rgmii-id";
> + phy0: phy@0 { /* VSC8211 */
> + reg = <0>;
> + };
> +};
> +
> +&gpio {
> + status = "okay";
> +};
> +
> +/* just eeprom here */
> +&i2c0 {
> + status = "okay";
> + clock-frequency = <400000>;
> +
> + tca6416_u26: gpio@20 {
> + compatible = "ti,tca6416";
> + reg = <0x20>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + /* IRQ not connected */
> + };
> +
> + rtc@68 {
> + compatible = "dallas,ds1339";
> + reg = <0x68>;
> + };
> +};
> +
> +/* eeprom24c02 and SE98A temp chip pca9306 */
> +&i2c1 {
> + status = "okay";
> + clock-frequency = <400000>;
> +};
> +
> +&rtc {
> + status = "okay";
> +};
> +
> +&sata {
> + status = "okay";
> + /* SATA phy OOB timing settings */
> + ceva,p0-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
> + ceva,p0-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
> + ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
> + ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
> + ceva,p1-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
> + ceva,p1-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
> + ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
> + ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
> +};
> +
> +&sdhci1 { /* emmc with some settings */
> + status = "okay";
> +};
> +
> +/* main */
> +&uart0 {
> + status = "okay";
> +};
> +
> +/* DB9 */
> +&uart1 {
> + status = "okay";
> +};
> +
> +&usb0 {
> + status = "okay";
> + dr_mode = "host";
> +};
> +
> +/* ULPI SMSC USB3320 */
> +&usb1 {
> + status = "okay";
> + dr_mode = "host";
> +};
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts
> new file mode 100644
> index 000000000000..c6eb888d7812
> --- /dev/null
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts
> @@ -0,0 +1,181 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * dts file for Xilinx ZynqMP zc1751-xm018-dc4
> + *
> + * (C) Copyright 2015 - 2018, Xilinx, Inc.
> + *
> + * Michal Simek <michal.simek@xxxxxxxxxx>
> + */
> +
> +/dts-v1/;
> +
> +#include "zynqmp.dtsi"
> +#include "zynqmp-clk.dtsi"
> +
> +/ {
> + model = "ZynqMP zc1751-xm018-dc4";
> + compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
> +
> + aliases {
> + can0 = &can0;
> + can1 = &can1;

These too should be dropped I think.

> + ethernet0 = &gem0;
> + ethernet1 = &gem1;
> + ethernet2 = &gem2;
> + ethernet3 = &gem3;
> + gpio0 = &gpio;
> + i2c0 = &i2c0;
> + i2c1 = &i2c1;
> + rtc0 = &rtc;
> + serial0 = &uart0;
> + serial1 = &uart1;
> + };
> +
> + chosen {
> + bootargs = "earlycon";
> + stdout-path = "serial0:115200n8";
> + };
> +
> + memory@0 {
> + device_type = "memory";
> + reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
> + };
> +};
> +
> +&can0 {
> + status = "okay";
> +};
> +
> +&can1 {
> + status = "okay";
> +};
> +
> +&fpd_dma_chan1 {
> + status = "okay";
> +};
> +
> +&fpd_dma_chan2 {
> + status = "okay";
> +};
> +
> +&fpd_dma_chan3 {
> + status = "okay";
> +};
> +
> +&fpd_dma_chan4 {
> + status = "okay";
> +};
> +
> +&fpd_dma_chan5 {
> + status = "okay";
> +};
> +
> +&fpd_dma_chan6 {
> + status = "okay";
> +};
> +
> +&fpd_dma_chan7 {
> + status = "okay";
> +};
> +
> +&fpd_dma_chan8 {
> + status = "okay";
> +};
> +
> +&lpd_dma_chan1 {
> + status = "okay";
> +};
> +
> +&lpd_dma_chan2 {
> + status = "okay";
> +};
> +
> +&lpd_dma_chan3 {
> + status = "okay";
> +};
> +
> +&lpd_dma_chan4 {
> + status = "okay";
> +};
> +
> +&lpd_dma_chan5 {
> + status = "okay";
> +};
> +
> +&lpd_dma_chan6 {
> + status = "okay";
> +};
> +
> +&lpd_dma_chan7 {
> + status = "okay";
> +};
> +
> +&lpd_dma_chan8 {
> + status = "okay";
> +};
> +
> +&gem0 {
> + status = "okay";
> + phy-mode = "rgmii-id";
> + phy-handle = <&ethernet_phy0>;
> + ethernet_phy0: ethernet-phy@0 { /* Marvell 88e1512 */
> + reg = <0>;
> + };
> + ethernet_phy7: ethernet-phy@7 { /* Vitesse VSC8211 */
> + reg = <7>;
> + };
> + ethernet_phy3: ethernet-phy@3 { /* Realtek RTL8211DN */
> + reg = <3>;
> + };
> + ethernet_phy8: ethernet-phy@8 { /* Vitesse VSC8211 */
> + reg = <8>;
> + };
> +};
> +
> +&gem1 {
> + status = "okay";
> + phy-mode = "rgmii-id";
> + phy-handle = <&ethernet_phy7>;
> +};
> +
> +&gem2 {
> + status = "okay";
> + phy-mode = "rgmii-id";
> + phy-handle = <&ethernet_phy3>;
> +};
> +
> +&gem3 {
> + status = "okay";
> + phy-mode = "rgmii-id";
> + phy-handle = <&ethernet_phy8>;
> +};
> +
> +&gpio {
> + status = "okay";
> +};
> +
> +&i2c0 {
> + clock-frequency = <400000>;
> + status = "okay";
> +};
> +
> +&i2c1 {
> + clock-frequency = <400000>;
> + status = "okay";
> +};
> +
> +&rtc {
> + status = "okay";
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> +
> +&uart1 {
> + status = "okay";
> +};
> +
> +&watchdog0 {
> + status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts
> new file mode 100644
> index 000000000000..2422f939ab53
> --- /dev/null
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts
> @@ -0,0 +1,126 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * dts file for Xilinx ZynqMP zc1751-xm019-dc5
> + *
> + * (C) Copyright 2015 - 2018, Xilinx, Inc.
> + *
> + * Siva Durga Prasad <siva.durga.paladugu@xxxxxxxxxx>
> + * Michal Simek <michal.simek@xxxxxxxxxx>
> + */
> +
> +/dts-v1/;
> +
> +#include "zynqmp.dtsi"
> +#include "zynqmp-clk.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> + model = "ZynqMP zc1751-xm019-dc5 RevA";
> + compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
> +
> + aliases {
> + ethernet0 = &gem1;
> + gpio0 = &gpio;
> + i2c0 = &i2c0;
> + i2c1 = &i2c1;
> + mmc0 = &sdhci0;
> + serial0 = &uart0;
> + serial1 = &uart1;
> + };
> +
> + chosen {
> + bootargs = "earlycon";
> + stdout-path = "serial0:115200n8";
> + };
> +
> + memory@0 {
> + device_type = "memory";
> + reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
> + };
> +};
> +
> +&fpd_dma_chan1 {
> + status = "okay";
> +};
> +
> +&fpd_dma_chan2 {
> + status = "okay";
> +};
> +
> +&fpd_dma_chan3 {
> + status = "okay";
> +};
> +
> +&fpd_dma_chan4 {
> + status = "okay";
> +};
> +
> +&fpd_dma_chan5 {
> + status = "okay";
> +};
> +
> +&fpd_dma_chan6 {
> + status = "okay";
> +};
> +
> +&fpd_dma_chan7 {
> + status = "okay";
> +};
> +
> +&fpd_dma_chan8 {
> + status = "okay";
> +};
> +
> +&gem1 {
> + status = "okay";
> + phy-handle = <&phy0>;
> + phy-mode = "rgmii-id";
> + phy0: phy@0 {
> + reg = <0>;
> + };
> +};
> +
> +&gpio {
> + status = "okay";
> +};
> +
> +&i2c0 {
> + status = "okay";
> +};
> +
> +&i2c1 {
> + status = "okay";
> +};
> +
> +&sdhci0 {
> + status = "okay";
> + no-1-8-v;
> +};
> +
> +&ttc0 {
> + status = "okay";
> +};
> +
> +&ttc1 {
> + status = "okay";
> +};
> +
> +&ttc2 {
> + status = "okay";
> +};
> +
> +&ttc3 {
> + status = "okay";
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> +
> +&uart1 {
> + status = "okay";
> +};
> +
> +&watchdog0 {
> + status = "okay";
> +};
> --
> 1.9.1
>

Next message: Rob Herring: "Re: [PATCH v2 1/5] arm: zynq: Add Xilinx cc108 board"
Previous message: Marc-AndrÃ Lureau: "Re: [PATCH v16 09/11] crash: export paddr_vmcoreinfo_note()"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]