[PATCH v3 0/8] arm64: zynqmp: Add support for existing Xilinx ZynqMP based boards

From: Michal Simek
Date: Fri Mar 02 2018 - 14:04:47 EST


Hi,

This patchset is adding all current existing Xilinx ZynqMP boards.
zcu* boards are customer boards. zc1* are mainly Xilinx internal boards
but some of them have been shared with customers. zc1751 is unique in
this set because it is based board with FMC card for silicon/hard IP
validation.
All boards are using the same default clock configuration till clock
driver is merged to mainline. Some boards also contain other components
which are not described because mainline driver haven't been merged yet.
For example nand, qspi, pinctrl and phy.
Please let me know if you see any issue with these boards.

Thanks,
Michal

Changes in v3:
- Remove usb and gpio aliases
- Use i2c-mux instead of i2cswitch on revB board
- Remove qspi comment from revB
- Remove gpio and usb aliases
- Use i2c-mux instead of i2cswitch - was done with zcu106
- Remove gpio and usb aliases
- remove gpio and usb aliases
- Remove usb and gpio aliases
- Remove aliases for can, usb, gpio
- dc2 fix spi_flashes and partitions

Changes in v2:
- New patch in this series
- Use i2c-mux instead of i2cswitch
- Remove i2c mw u-boot commands
- Use 96boards labels for i2cs and spis
- Fix pmic and wifi node
- Record compatible string to xilinx.txt
- Remove Nathalie's email (she left Xilinx already)
- Remove i2c mw u-boot commands
- Use i2c-mux instead of i2cswitch
- Use clock generator without numbers.
- Use dash in node name zcu102 rev1.0
- Record compatible string to xilinx.txt
- Remove i2c mw u-boot commands
- Record compatible string to xilinx.txt
- Remove i2c mw u-boot commands
- Use i2c-mux instead of i2cswitch
- Use clock generator without numbers
- Record compatible string to xilinx.txt
- Remove i2c mw u-boot commands
- Use i2c-mux instead of i2cswitch
- Use clock generator without numbers.
- Record compatible string to xilinx.txt
- Record compatible string to xilinx.txt
- Record compatible string to xilinx.txt

Michal Simek (8):
dt-bindings: xilinx: Add description for ZynqMP
arm64: zynqmp: Add support for Xilinx zcu100-revC
arm64: zynqmp: Add support for Xilinx zcu102
arm64: zynqmp: Add support for Xilinx zcu104-revA
arm64: zynqmp: Add support for Xilinx zcu106-revA
arm64: zynqmp: Add support for Xilinx zcu111-revA
arm64: zynqmp: Add support for Xilinx zc12XX boards
arm64: zynqmp: Add support for Xilinx zc1751

Documentation/devicetree/bindings/arm/xilinx.txt | 42 ++
arch/arm64/boot/dts/xilinx/Makefile | 15 +
arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi | 213 ++++++++
arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts | 54 ++
arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts | 42 ++
arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts | 42 ++
.../boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts | 131 +++++
.../boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts | 168 +++++++
.../boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts | 150 ++++++
.../boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts | 178 +++++++
.../boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts | 125 +++++
arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts | 289 +++++++++++
.../arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts | 36 ++
arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts | 548 +++++++++++++++++++++
arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts | 40 ++
arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts | 195 ++++++++
arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts | 522 ++++++++++++++++++++
arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts | 444 +++++++++++++++++
18 files changed, 3234 insertions(+)
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts

--
1.9.1