[PATCH AUTOSEL for 4.9 192/219] power: supply: ab8500_charger: Bail out in case of error in 'ab8500_charger_init_hw_registers()'

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>

[ Upstream commit 09edcb647542487864e23aa8d2ef26be3e08978a ]

If an error occurs when we enable the backup battery charging, we should
go through the error handling path directly.

Before commit db43e6c473b5 ("ab8500-bm: Add usb power path support") this
was the case, but this commit has added some code between the last test and
the 'out' label.
So, in case of error, this added code is executed and the error may be
silently ignored.

Fix it by adding the missing 'goto out', as done in all other error
handling paths.

Fixes: db43e6c473b5 ("ab8500-bm: Add usb power path support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
Signed-off-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxxxx>
---
 drivers/power/supply/ab8500_charger.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/power/supply/ab8500_charger.c b/drivers/power/supply/ab8500_charger.c
index 037e93224c38..48a11fd86a7f 100644
--- a/drivers/power/supply/ab8500_charger.c
+++ b/drivers/power/supply/ab8500_charger.c
@@ -3221,8 +3221,10 @@ static int ab8500_charger_init_hw_registers(struct ab8500_charger *di)
 	ret = abx500_mask_and_set_register_interruptible(di->dev,
 		AB8500_RTC, AB8500_RTC_CTRL_REG,
 		RTC_BUP_CH_ENA, RTC_BUP_CH_ENA);
-	if (ret < 0)
+	if (ret < 0) {
 		dev_err(di->dev, "%s mask and set failed\n", __func__);
+		goto out;
+	}
 
 	if (is_ab8540(di->parent)) {
 		ret = abx500_mask_and_set_register_interruptible(di->dev,
-- 
2.14.1