[PATCH v3 2/4] Staging: iio: adis16209: Change some macro names

[Shreeya Patel]

Make some of the macro names according to the names
given in the datasheet of the adis16209 driver.

Signed-off-by: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
---

Changes in v3
  -Introduce this new patch for v3 of the series.

 drivers/staging/iio/accel/adis16209.c | 48 +++++++++++++++++------------------
 1 file changed, 24 insertions(+), 24 deletions(-)

diff --git a/drivers/staging/iio/accel/adis16209.c b/drivers/staging/iio/accel/adis16209.c
index d8aef9c..eb5c878 100644
--- a/drivers/staging/iio/accel/adis16209.c
+++ b/drivers/staging/iio/accel/adis16209.c
@@ -68,21 +68,21 @@
 #define  ADIS16209_MSC_CTRL_ACTIVE_HIGH		BIT(1)
 #define  ADIS16209_MSC_CTRL_DATA_RDY_DIO2	BIT(0)
 
-#define ADIS16209_DIAG_STAT_REG			0x3C
-#define  ADIS16209_DIAG_STAT_ALARM2		BIT(9)
-#define  ADIS16209_DIAG_STAT_ALARM1		BIT(8)
-#define ADIS16209_DIAG_STAT_SELFTEST_FAIL_BIT	5
-#define ADIS16209_DIAG_STAT_SPI_FAIL_BIT	3
-#define ADIS16209_DIAG_STAT_FLASH_UPT_BIT	2
+#define ADIS16209_STAT_REG			0x3C
+#define  ADIS16209_STAT_ALARM2			BIT(9)
+#define  ADIS16209_STAT_ALARM1			BIT(8)
+#define ADIS16209_STAT_SELFTEST_FAIL_BIT	5
+#define ADIS16209_STAT_SPI_FAIL_BIT		3
+#define ADIS16209_STAT_FLASH_UPT_FAIL_BIT	2
 /* Power supply above 3.625 V */
-#define ADIS16209_DIAG_STAT_POWER_HIGH_BIT	1
+#define ADIS16209_STAT_POWER_HIGH_BIT		1
 /* Power supply below 3.15 V */
-#define ADIS16209_DIAG_STAT_POWER_LOW_BIT	0
+#define ADIS16209_STAT_POWER_LOW_BIT		0
 
-#define ADIS16209_GLOB_CMD_REG			0x3E
-#define  ADIS16209_GLOB_CMD_SW_RESET		BIT(7)
-#define  ADIS16209_GLOB_CMD_CLEAR_STAT		BIT(4)
-#define  ADIS16209_GLOB_CMD_FACTORY_CAL		BIT(1)
+#define ADIS16209_CMD_REG			0x3E
+#define  ADIS16209_CMD_SW_RESET			BIT(7)
+#define  ADIS16209_CMD_CLEAR_STAT		BIT(4)
+#define  ADIS16209_CMD_FACTORY_CAL		BIT(1)
 
 #define ADIS16209_ERROR_ACTIVE			BIT(14)
 
@@ -238,29 +238,29 @@ static const struct iio_info adis16209_info = {
 };
 
 static const char * const adis16209_status_error_msgs[] = {
-	[ADIS16209_DIAG_STAT_SELFTEST_FAIL_BIT] = "Self test failure",
-	[ADIS16209_DIAG_STAT_SPI_FAIL_BIT] = "SPI failure",
-	[ADIS16209_DIAG_STAT_FLASH_UPT_BIT] = "Flash update failed",
-	[ADIS16209_DIAG_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V",
-	[ADIS16209_DIAG_STAT_POWER_LOW_BIT] = "Power supply below 3.15V",
+	[ADIS16209_STAT_SELFTEST_FAIL_BIT] = "Self test failure",
+	[ADIS16209_STAT_SPI_FAIL_BIT] = "SPI failure",
+	[ADIS16209_STAT_FLASH_UPT_FAIL_BIT] = "Flash update failed",
+	[ADIS16209_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V",
+	[ADIS16209_STAT_POWER_LOW_BIT] = "Power supply below 3.15V",
 };
 
 static const struct adis_data adis16209_data = {
 	.read_delay = 30,
 	.msc_ctrl_reg = ADIS16209_MSC_CTRL_REG,
-	.glob_cmd_reg = ADIS16209_GLOB_CMD_REG,
-	.diag_stat_reg = ADIS16209_DIAG_STAT_REG,
+	.glob_cmd_reg = ADIS16209_CMD_REG,
+	.diag_stat_reg = ADIS16209_STAT_REG,
 
 	.self_test_mask = ADIS16209_MSC_CTRL_SELF_TEST_EN,
 	.self_test_no_autoclear = true,
 	.startup_delay = ADIS16209_STARTUP_DELAY_MS,
 
 	.status_error_msgs = adis16209_status_error_msgs,
-	.status_error_mask = BIT(ADIS16209_DIAG_STAT_SELFTEST_FAIL_BIT) |
-		BIT(ADIS16209_DIAG_STAT_SPI_FAIL_BIT) |
-		BIT(ADIS16209_DIAG_STAT_FLASH_UPT_BIT) |
-		BIT(ADIS16209_DIAG_STAT_POWER_HIGH_BIT) |
-		BIT(ADIS16209_DIAG_STAT_POWER_LOW_BIT),
+	.status_error_mask = BIT(ADIS16209_STAT_SELFTEST_FAIL_BIT) |
+		BIT(ADIS16209_STAT_SPI_FAIL_BIT) |
+		BIT(ADIS16209_STAT_FLASH_UPT_FAIL_BIT) |
+		BIT(ADIS16209_STAT_POWER_HIGH_BIT) |
+		BIT(ADIS16209_STAT_POWER_LOW_BIT),
 };
 
 static int adis16209_probe(struct spi_device *spi)
-- 
2.7.4