[PATCH v4 0/2] Add HiSilicon INNO USB2 PHY driver support
From: Shawn Guo
Date: Sun Mar 04 2018 - 21:40:54 EST
It adds device tree bindings and driver support for HiSilicon INNO USB2
PHY device, which can be found on HiSilicon STB SoC Hi3798CV200.
Changes for v4:
- Change device tree bindings to define each PHY port as a child node,
and therefore instead of adding a custom .of_xlate, we can use
of_phy_simple_xlate. Also #phy-cells is 0 now, and consumers can
refer to the phy without any number cell in phandle.
Changes for v3:
- Make combphy device be child of peripheral controller and use 'reg'
property for mapping combphy configuration register.
Changes for v2:
- Move DT bindings into a separate patch.
- Rename hisi_inno_phy_start() to hisi_inno_phy_init() for aligning
name with .init hook.
Pengcheng Li (2):
dt-bindings: add bindings doc for HiSilicon INNO USB2 PHY
phy: add inno-usb2-phy driver for hi3798cv200 SoC
.../devicetree/bindings/phy/phy-hisi-inno-usb2.txt | 72 ++++++++
drivers/phy/hisilicon/Kconfig | 10 ++
drivers/phy/hisilicon/Makefile | 1 +
drivers/phy/hisilicon/phy-hisi-inno-usb2.c | 197 +++++++++++++++++++++
4 files changed, 280 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt
create mode 100644 drivers/phy/hisilicon/phy-hisi-inno-usb2.c
--
1.9.1