[PATCH v3 2/3] gpio: Add Spreadtrum EIC driver support

From: Baolin Wang
Date: Sun Mar 04 2018 - 21:57:55 EST


The Spreadtrum digital-chip EIC controller has 4 sub-modules: debounce EIC,
latch EIC, async EIC and sync EIC, and each sub-module can has multiple
banks and each bank contains 8 EICs.

Each EIC can only be used as input mode, and has the capability to trigger
interrupts when detecting input signals.

Signed-off-by: Baolin Wang <baolin.wang@xxxxxxxxxx>
---
Changes since v2:
- No updates.

Changes since v1:
- Add OF_GPIO dependency.
- Fix some typos and grammar issues.
- Simplify the sprd_eic_update() and sprd_eic_read().
- Rename 'sprd_eic_data' to 'sprd_eic_variant_data'.
- Rename sprd_eic_group_base() to sprd_eic_offset_base().
- Split the PMIC EIC support into one separate driver.
- Return -EIO for sprd_eic_direction_input().
- Other optimization.
---
drivers/gpio/Kconfig | 8 +
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-eic-sprd.c | 606 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 615 insertions(+)
create mode 100644 drivers/gpio/gpio-eic-sprd.c

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index a64b29d..c937407 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -159,6 +159,14 @@ config GPIO_DWAPB
Say Y or M here to build support for the Synopsys DesignWare APB
GPIO block.

+config GPIO_EIC_SPRD
+ tristate "Spreadtrum EIC support"
+ depends on ARCH_SPRD || COMPILE_TEST
+ depends on OF_GPIO
+ select GPIOLIB_IRQCHIP
+ help
+ Say yes here to support Spreadtrum EIC device.
+
config GPIO_EM
tristate "Emma Mobile GPIO"
depends on (ARCH_EMEV2 || COMPILE_TEST) && OF_GPIO
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 2e3d320..66eaa9e 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -44,6 +44,7 @@ obj-$(CONFIG_GPIO_DA9055) += gpio-da9055.o
obj-$(CONFIG_GPIO_DAVINCI) += gpio-davinci.o
obj-$(CONFIG_GPIO_DLN2) += gpio-dln2.o
obj-$(CONFIG_GPIO_DWAPB) += gpio-dwapb.o
+obj-$(CONFIG_GPIO_EIC_SPRD) += gpio-eic-sprd.o
obj-$(CONFIG_GPIO_EM) += gpio-em.o
obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o
obj-$(CONFIG_GPIO_ETRAXFS) += gpio-etraxfs.o
diff --git a/drivers/gpio/gpio-eic-sprd.c b/drivers/gpio/gpio-eic-sprd.c
new file mode 100644
index 0000000..de7dd93
--- /dev/null
+++ b/drivers/gpio/gpio-eic-sprd.c
@@ -0,0 +1,606 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Spreadtrum Communications Inc.
+ * Copyright (C) 2018 Linaro Ltd.
+ */
+
+#include <linux/bitops.h>
+#include <linux/gpio/driver.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+
+/* EIC registers definition */
+#define SPRD_EIC_DBNC_DATA 0x0
+#define SPRD_EIC_DBNC_DMSK 0x4
+#define SPRD_EIC_DBNC_IEV 0x14
+#define SPRD_EIC_DBNC_IE 0x18
+#define SPRD_EIC_DBNC_RIS 0x1c
+#define SPRD_EIC_DBNC_MIS 0x20
+#define SPRD_EIC_DBNC_IC 0x24
+#define SPRD_EIC_DBNC_TRIG 0x28
+#define SPRD_EIC_DBNC_CTRL0 0x40
+
+#define SPRD_EIC_LATCH_INTEN 0x0
+#define SPRD_EIC_LATCH_INTRAW 0x4
+#define SPRD_EIC_LATCH_INTMSK 0x8
+#define SPRD_EIC_LATCH_INTCLR 0xc
+#define SPRD_EIC_LATCH_INTPOL 0x10
+#define SPRD_EIC_LATCH_INTMODE 0x14
+
+#define SPRD_EIC_ASYNC_INTIE 0x0
+#define SPRD_EIC_ASYNC_INTRAW 0x4
+#define SPRD_EIC_ASYNC_INTMSK 0x8
+#define SPRD_EIC_ASYNC_INTCLR 0xc
+#define SPRD_EIC_ASYNC_INTMODE 0x10
+#define SPRD_EIC_ASYNC_INTBOTH 0x14
+#define SPRD_EIC_ASYNC_INTPOL 0x18
+#define SPRD_EIC_ASYNC_DATA 0x1c
+
+#define SPRD_EIC_SYNC_INTIE 0x0
+#define SPRD_EIC_SYNC_INTRAW 0x4
+#define SPRD_EIC_SYNC_INTMSK 0x8
+#define SPRD_EIC_SYNC_INTCLR 0xc
+#define SPRD_EIC_SYNC_INTMODE 0x10
+#define SPRD_EIC_SYNC_INTBOTH 0x14
+#define SPRD_EIC_SYNC_INTPOL 0x18
+#define SPRD_EIC_SYNC_DATA 0x1c
+
+/*
+ * The digital-chip EIC controller can support maximum 3 banks, and each bank
+ * contains 8 EICs.
+ */
+#define SPRD_EIC_MAX_BANK 3
+#define SPRD_EIC_PER_BANK_NR 8
+#define SPRD_EIC_DATA_MASK GENMASK(7, 0)
+#define SPRD_EIC_BIT(x) ((x) & (SPRD_EIC_PER_BANK_NR - 1))
+#define SPRD_EIC_DBNC_MASK GENMASK(11, 0)
+
+/*
+ * The Spreadtrum EIC (external interrupt controller) can be used only in
+ * input mode to generate interrupts if detecting input signals.
+ *
+ * The Spreadtrum digital-chip EIC controller contains 4 sub-modules:
+ * debounce EIC, latch EIC, async EIC and sync EIC,
+ *
+ * The debounce EIC is used to capture the input signals' stable status
+ * (millisecond resolution) and a single-trigger mechanism is introduced
+ * into this sub-module to enhance the input event detection reliability.
+ * The debounce range is from 1ms to 4s with a step size of 1ms.
+ *
+ * The latch EIC is used to latch some special power down signals and
+ * generate interrupts, since the latch EIC does not depend on the APB clock
+ * to capture signals.
+ *
+ * The async EIC uses a 32k clock to capture the short signals (microsecond
+ * resolution) to generate interrupts by level or edge trigger.
+ *
+ * The EIC-sync is similar with GPIO's input function, which is a synchronized
+ * signal input register.
+ */
+enum sprd_eic_type {
+ SPRD_EIC_DEBOUNCE,
+ SPRD_EIC_LATCH,
+ SPRD_EIC_ASYNC,
+ SPRD_EIC_SYNC,
+ SPRD_EIC_MAX,
+};
+
+struct sprd_eic {
+ struct gpio_chip chip;
+ struct irq_chip intc;
+ void __iomem *base[SPRD_EIC_MAX_BANK];
+ enum sprd_eic_type type;
+ spinlock_t lock;
+ int irq;
+};
+
+struct sprd_eic_variant_data {
+ enum sprd_eic_type type;
+ u32 num_eics;
+};
+
+static const char *sprd_eic_label_name[SPRD_EIC_MAX] = {
+ "eic-debounce", "eic-latch", "eic-async",
+ "eic-sync",
+};
+
+static const struct sprd_eic_variant_data sc9860_eic_dbnc_data = {
+ .type = SPRD_EIC_DEBOUNCE,
+ .num_eics = 8,
+};
+
+static const struct sprd_eic_variant_data sc9860_eic_latch_data = {
+ .type = SPRD_EIC_LATCH,
+ .num_eics = 8,
+};
+
+static const struct sprd_eic_variant_data sc9860_eic_async_data = {
+ .type = SPRD_EIC_ASYNC,
+ .num_eics = 8,
+};
+
+static const struct sprd_eic_variant_data sc9860_eic_sync_data = {
+ .type = SPRD_EIC_SYNC,
+ .num_eics = 8,
+};
+
+static inline void __iomem *sprd_eic_offset_base(struct sprd_eic *sprd_eic,
+ unsigned int bank)
+{
+ if (bank >= SPRD_EIC_MAX_BANK)
+ return NULL;
+
+ return sprd_eic->base[bank];
+}
+
+static void sprd_eic_update(struct gpio_chip *chip, unsigned int offset,
+ u16 reg, unsigned int val)
+{
+ struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
+ void __iomem *base =
+ sprd_eic_offset_base(sprd_eic, offset / SPRD_EIC_PER_BANK_NR);
+ unsigned long flags;
+ u32 tmp;
+
+ spin_lock_irqsave(&sprd_eic->lock, flags);
+ tmp = readl_relaxed(base + reg);
+
+ if (val)
+ tmp |= BIT(SPRD_EIC_BIT(offset));
+ else
+ tmp &= ~BIT(SPRD_EIC_BIT(offset));
+
+ writel_relaxed(tmp, base + reg);
+ spin_unlock_irqrestore(&sprd_eic->lock, flags);
+}
+
+static int sprd_eic_read(struct gpio_chip *chip, unsigned int offset, u16 reg)
+{
+ struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
+ void __iomem *base =
+ sprd_eic_offset_base(sprd_eic, offset / SPRD_EIC_PER_BANK_NR);
+
+ return !!(readl_relaxed(base + reg) & BIT(SPRD_EIC_BIT(offset)));
+}
+
+static int sprd_eic_request(struct gpio_chip *chip, unsigned int offset)
+{
+ sprd_eic_update(chip, offset, SPRD_EIC_DBNC_DMSK, 1);
+ return 0;
+}
+
+static void sprd_eic_free(struct gpio_chip *chip, unsigned int offset)
+{
+ sprd_eic_update(chip, offset, SPRD_EIC_DBNC_DMSK, 0);
+}
+
+static int sprd_eic_get(struct gpio_chip *chip, unsigned int offset)
+{
+ return sprd_eic_read(chip, offset, SPRD_EIC_DBNC_DATA);
+}
+
+static int sprd_eic_direction_input(struct gpio_chip *chip, unsigned int offset)
+{
+ /* EICs are always input, nothing need to do here. */
+ return 0;
+}
+
+static void sprd_eic_set(struct gpio_chip *chip, unsigned int offset, int value)
+{
+ /* EICs are always input, nothing need to do here. */
+}
+
+static int sprd_eic_set_debounce(struct gpio_chip *chip, unsigned int offset,
+ unsigned int debounce)
+{
+ struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
+ void __iomem *base =
+ sprd_eic_offset_base(sprd_eic, offset / SPRD_EIC_PER_BANK_NR);
+ u32 reg = SPRD_EIC_DBNC_CTRL0 + SPRD_EIC_BIT(offset) * 0x4;
+ u32 value = readl_relaxed(base + reg) & ~SPRD_EIC_DBNC_MASK;
+
+ value |= (debounce / 1000) & SPRD_EIC_DBNC_MASK;
+ writel_relaxed(value, base + reg);
+
+ return 0;
+}
+
+static int sprd_eic_set_config(struct gpio_chip *chip, unsigned int offset,
+ unsigned long config)
+{
+ unsigned long param = pinconf_to_config_param(config);
+ u32 arg = pinconf_to_config_argument(config);
+
+ if (param == PIN_CONFIG_INPUT_DEBOUNCE)
+ return sprd_eic_set_debounce(chip, offset, arg);
+
+ return -ENOTSUPP;
+}
+
+static void sprd_eic_irq_mask(struct irq_data *data)
+{
+ struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+ struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
+ u32 offset = irqd_to_hwirq(data);
+
+ switch (sprd_eic->type) {
+ case SPRD_EIC_DEBOUNCE:
+ sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IE, 0);
+ sprd_eic_update(chip, offset, SPRD_EIC_DBNC_TRIG, 0);
+ break;
+ case SPRD_EIC_LATCH:
+ sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTEN, 0);
+ break;
+ case SPRD_EIC_ASYNC:
+ sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTIE, 0);
+ break;
+ case SPRD_EIC_SYNC:
+ sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTIE, 0);
+ break;
+ default:
+ dev_err(chip->parent, "Unsupported EIC type.\n");
+ }
+}
+
+static void sprd_eic_irq_unmask(struct irq_data *data)
+{
+ struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+ struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
+ u32 offset = irqd_to_hwirq(data);
+
+ switch (sprd_eic->type) {
+ case SPRD_EIC_DEBOUNCE:
+ sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IE, 1);
+ sprd_eic_update(chip, offset, SPRD_EIC_DBNC_TRIG, 1);
+ break;
+ case SPRD_EIC_LATCH:
+ sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTEN, 1);
+ break;
+ case SPRD_EIC_ASYNC:
+ sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTIE, 1);
+ break;
+ case SPRD_EIC_SYNC:
+ sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTIE, 1);
+ break;
+ default:
+ dev_err(chip->parent, "Unsupported EIC type.\n");
+ }
+}
+
+static void sprd_eic_irq_ack(struct irq_data *data)
+{
+ struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+ struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
+ u32 offset = irqd_to_hwirq(data);
+
+ switch (sprd_eic->type) {
+ case SPRD_EIC_DEBOUNCE:
+ sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IC, 1);
+ break;
+ case SPRD_EIC_LATCH:
+ sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTCLR, 1);
+ break;
+ case SPRD_EIC_ASYNC:
+ sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
+ break;
+ case SPRD_EIC_SYNC:
+ sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
+ break;
+ default:
+ dev_err(chip->parent, "Unsupported EIC type.\n");
+ }
+}
+
+static int sprd_eic_irq_set_type(struct irq_data *data, unsigned int flow_type)
+{
+ struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+ struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
+ u32 offset = irqd_to_hwirq(data);
+
+ switch (sprd_eic->type) {
+ case SPRD_EIC_DEBOUNCE:
+ switch (flow_type) {
+ case IRQ_TYPE_LEVEL_HIGH:
+ sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 1);
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 0);
+ break;
+ default:
+ return -ENOTSUPP;
+ }
+
+ irq_set_handler_locked(data, handle_level_irq);
+ break;
+ case SPRD_EIC_LATCH:
+ switch (flow_type) {
+ case IRQ_TYPE_LEVEL_HIGH:
+ sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 0);
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 1);
+ break;
+ default:
+ return -ENOTSUPP;
+ }
+
+ irq_set_handler_locked(data, handle_level_irq);
+ break;
+ case SPRD_EIC_ASYNC:
+ switch (flow_type) {
+ case IRQ_TYPE_EDGE_RISING:
+ sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
+ sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0);
+ sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 1);
+ irq_set_handler_locked(data, handle_edge_irq);
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
+ sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0);
+ sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 0);
+ irq_set_handler_locked(data, handle_edge_irq);
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 1);
+ irq_set_handler_locked(data, handle_edge_irq);
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
+ sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 1);
+ sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 1);
+ irq_set_handler_locked(data, handle_level_irq);
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
+ sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 1);
+ sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 0);
+ irq_set_handler_locked(data, handle_level_irq);
+ break;
+ default:
+ return -ENOTSUPP;
+ }
+ break;
+ case SPRD_EIC_SYNC:
+ switch (flow_type) {
+ case IRQ_TYPE_EDGE_RISING:
+ sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
+ sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0);
+ sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 1);
+ irq_set_handler_locked(data, handle_edge_irq);
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
+ sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0);
+ sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 0);
+ irq_set_handler_locked(data, handle_edge_irq);
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 1);
+ irq_set_handler_locked(data, handle_edge_irq);
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
+ sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 1);
+ sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 1);
+ irq_set_handler_locked(data, handle_level_irq);
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
+ sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 1);
+ sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 0);
+ irq_set_handler_locked(data, handle_level_irq);
+ break;
+ default:
+ return -ENOTSUPP;
+ }
+ default:
+ dev_err(chip->parent, "Unsupported EIC type.\n");
+ return -ENOTSUPP;
+ }
+
+ return 0;
+}
+
+static int sprd_eic_match_chip_by_type(struct gpio_chip *chip, void *data)
+{
+ enum sprd_eic_type type = *(enum sprd_eic_type *)data;
+
+ return !strcmp(chip->label, sprd_eic_label_name[type]);
+}
+
+static void sprd_eic_handle_one_type(struct gpio_chip *chip)
+{
+ struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
+ u32 bank, n, girq;
+
+ for (bank = 0; bank * SPRD_EIC_PER_BANK_NR < chip->ngpio; bank++) {
+ void __iomem *base = sprd_eic_offset_base(sprd_eic, bank);
+ unsigned long reg;
+
+ switch (sprd_eic->type) {
+ case SPRD_EIC_DEBOUNCE:
+ reg = readl_relaxed(base + SPRD_EIC_DBNC_MIS) &
+ SPRD_EIC_DATA_MASK;
+ break;
+ case SPRD_EIC_LATCH:
+ reg = readl_relaxed(base + SPRD_EIC_LATCH_INTMSK) &
+ SPRD_EIC_DATA_MASK;
+ break;
+ case SPRD_EIC_ASYNC:
+ reg = readl_relaxed(base + SPRD_EIC_ASYNC_INTMSK) &
+ SPRD_EIC_DATA_MASK;
+ break;
+ case SPRD_EIC_SYNC:
+ reg = readl_relaxed(base + SPRD_EIC_SYNC_INTMSK) &
+ SPRD_EIC_DATA_MASK;
+ break;
+ default:
+ dev_err(chip->parent, "Unsupported EIC type.\n");
+ return;
+ }
+
+ for_each_set_bit(n, &reg, SPRD_EIC_PER_BANK_NR) {
+ girq = irq_find_mapping(chip->irq.domain,
+ bank * SPRD_EIC_PER_BANK_NR + n);
+
+ generic_handle_irq(girq);
+ }
+ }
+}
+
+static void sprd_eic_irq_handler(struct irq_desc *desc)
+{
+ struct irq_chip *ic = irq_desc_get_chip(desc);
+ struct gpio_chip *chip;
+ enum sprd_eic_type type;
+
+ chained_irq_enter(ic, desc);
+
+ /*
+ * Since the digital-chip EIC 4 sub-modules (debounce, latch, async
+ * and sync) share one same interrupt line, we should iterate each
+ * EIC module to check if there are EIC interrupts were triggered.
+ */
+ for (type = SPRD_EIC_DEBOUNCE; type < SPRD_EIC_MAX; type++) {
+ chip = gpiochip_find(&type, sprd_eic_match_chip_by_type);
+ if (!chip)
+ continue;
+
+ sprd_eic_handle_one_type(chip);
+ }
+
+ chained_irq_exit(ic, desc);
+}
+
+static int sprd_eic_probe(struct platform_device *pdev)
+{
+ const struct sprd_eic_variant_data *pdata;
+ struct gpio_irq_chip *irq;
+ struct sprd_eic *sprd_eic;
+ struct resource *res;
+ int ret, i;
+
+ pdata = of_device_get_match_data(&pdev->dev);
+ if (!pdata) {
+ dev_err(&pdev->dev, "No matching driver data found.\n");
+ return -EINVAL;
+ }
+
+ sprd_eic = devm_kzalloc(&pdev->dev, sizeof(*sprd_eic), GFP_KERNEL);
+ if (!sprd_eic)
+ return -ENOMEM;
+
+ spin_lock_init(&sprd_eic->lock);
+ sprd_eic->type = pdata->type;
+
+ sprd_eic->irq = platform_get_irq(pdev, 0);
+ if (sprd_eic->irq < 0) {
+ dev_err(&pdev->dev, "Failed to get EIC interrupt.\n");
+ return sprd_eic->irq;
+ }
+
+ for (i = 0; i < SPRD_EIC_MAX_BANK; i++) {
+ /*
+ * We can have maximum 3 banks EICs, and each EIC has
+ * its own base address. But some platform maybe only
+ * have one bank EIC, thus base[1] and base[2] can be
+ * optional.
+ */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+ if (!res)
+ continue;
+
+ sprd_eic->base[i] = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(sprd_eic->base[i]))
+ return PTR_ERR(sprd_eic->base[i]);
+ }
+
+ sprd_eic->chip.label = sprd_eic_label_name[sprd_eic->type];
+ sprd_eic->chip.ngpio = pdata->num_eics;
+ sprd_eic->chip.base = -1;
+ sprd_eic->chip.parent = &pdev->dev;
+ sprd_eic->chip.of_node = pdev->dev.of_node;
+ sprd_eic->chip.direction_input = sprd_eic_direction_input;
+ switch (sprd_eic->type) {
+ case SPRD_EIC_DEBOUNCE:
+ sprd_eic->chip.request = sprd_eic_request;
+ sprd_eic->chip.free = sprd_eic_free;
+ sprd_eic->chip.set_config = sprd_eic_set_config;
+ sprd_eic->chip.set = sprd_eic_set;
+ /* fall-through */
+ case SPRD_EIC_ASYNC:
+ /* fall-through */
+ case SPRD_EIC_SYNC:
+ sprd_eic->chip.get = sprd_eic_get;
+ break;
+ case SPRD_EIC_LATCH:
+ /* fall-through */
+ default:
+ break;
+ }
+
+ sprd_eic->intc.name = dev_name(&pdev->dev);
+ sprd_eic->intc.irq_ack = sprd_eic_irq_ack;
+ sprd_eic->intc.irq_mask = sprd_eic_irq_mask;
+ sprd_eic->intc.irq_unmask = sprd_eic_irq_unmask;
+ sprd_eic->intc.irq_set_type = sprd_eic_irq_set_type;
+ sprd_eic->intc.flags = IRQCHIP_SKIP_SET_WAKE;
+
+ irq = &sprd_eic->chip.irq;
+ irq->chip = &sprd_eic->intc;
+ irq->handler = handle_bad_irq;
+ irq->default_type = IRQ_TYPE_NONE;
+ irq->parent_handler = sprd_eic_irq_handler;
+ irq->parent_handler_data = sprd_eic;
+ irq->num_parents = 1;
+ irq->parents = &sprd_eic->irq;
+
+ ret = devm_gpiochip_add_data(&pdev->dev, &sprd_eic->chip, sprd_eic);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Could not register gpiochip %d.\n", ret);
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, sprd_eic);
+ return 0;
+}
+
+static const struct of_device_id sprd_eic_of_match[] = {
+ {
+ .compatible = "sprd,sc9860-eic-debounce",
+ .data = &sc9860_eic_dbnc_data,
+ },
+ {
+ .compatible = "sprd,sc9860-eic-latch",
+ .data = &sc9860_eic_latch_data,
+ },
+ {
+ .compatible = "sprd,sc9860-eic-async",
+ .data = &sc9860_eic_async_data,
+ },
+ {
+ .compatible = "sprd,sc9860-eic-sync",
+ .data = &sc9860_eic_sync_data,
+ },
+ {
+ /* end of list */
+ }
+};
+MODULE_DEVICE_TABLE(of, sprd_eic_of_match);
+
+static struct platform_driver sprd_eic_driver = {
+ .probe = sprd_eic_probe,
+ .driver = {
+ .name = "sprd-eic",
+ .of_match_table = sprd_eic_of_match,
+ },
+};
+
+module_platform_driver(sprd_eic_driver);
+
+MODULE_DESCRIPTION("Spreadtrum EIC driver");
+MODULE_LICENSE("GPL v2");
--
1.7.9.5