[PATCH 08/34] x86/entry/32: Enter the kernel via trampoline stack

From: Joerg Roedel
Date: Mon Mar 05 2018 - 05:32:48 EST

Next message: Joerg Roedel: "[PATCH 07/34] x86/entry/32: Restore segments before int registers"
Previous message: Joerg Roedel: "[PATCH 11/34] x86/entry/32: Handle Entry from Kernel-Mode on Entry-Stack"
In reply to: Joerg Roedel: "Re: [PATCH 11/34] x86/entry/32: Handle Entry from Kernel-Mode on Entry-Stack"
Next in thread: Joerg Roedel: "[PATCH 07/34] x86/entry/32: Restore segments before int registers"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

From: Joerg Roedel <jroedel@xxxxxxx>

Use the entry-stack as a trampoline to enter the kernel. The
entry-stack is already in the cpu_entry_area and will be
mapped to userspace when PTI is enabled.

Signed-off-by: Joerg Roedel <jroedel@xxxxxxx>
---
arch/x86/entry/entry_32.S | 136 +++++++++++++++++++++++++++++++--------
arch/x86/include/asm/switch_to.h | 6 +-
arch/x86/kernel/asm-offsets.c | 1 +
arch/x86/kernel/cpu/common.c | 5 +-
arch/x86/kernel/process.c | 2 -
arch/x86/kernel/process_32.c | 10 +--
6 files changed, 121 insertions(+), 39 deletions(-)

diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
index b39c5e2..1737da2 100644
--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -135,25 +135,36 @@

#endif /* CONFIG_X86_32_LAZY_GS */

-.macro SAVE_ALL pt_regs_ax=%eax
+.macro SAVE_ALL pt_regs_ax=%eax switch_stacks=0
cld
+ /* Push segment registers and %eax */
PUSH_GS
pushl %fs
pushl %es
pushl %ds
pushl \pt_regs_ax
+
+ /* Load kernel segments */
+ movl $(__USER_DS), %eax
+ movl %eax, %ds
+ movl %eax, %es
+ movl $(__KERNEL_PERCPU), %eax
+ movl %eax, %fs
+ SET_KERNEL_GS %eax
+
+ /* Push integer registers and complete PT_REGS */
pushl %ebp
pushl %edi
pushl %esi
pushl %edx
pushl %ecx
pushl %ebx
- movl $(__USER_DS), %edx
- movl %edx, %ds
- movl %edx, %es
- movl $(__KERNEL_PERCPU), %edx
- movl %edx, %fs
- SET_KERNEL_GS %edx
+
+ /* Switch to kernel stack if necessary */
+.if \switch_stacks > 0
+ SWITCH_TO_KERNEL_STACK
+.endif
+
.endm

/*
@@ -261,6 +272,72 @@
.Lend_\@:
#endif /* CONFIG_X86_ESPFIX32 */
.endm
+
+
+/*
+ * Called with pt_regs fully populated and kernel segments loaded,
+ * so we can access PER_CPU and use the integer registers.
+ *
+ * We need to be very careful here with the %esp switch, because an NMI
+ * can happen everywhere. If the NMI handler finds itself on the
+ * entry-stack, it will overwrite the task-stack and everything we
+ * copied there. So allocate the stack-frame on the task-stack and
+ * switch to it before we do any copying.
+ */
+.macro SWITCH_TO_KERNEL_STACK
+
+ ALTERNATIVE "", "jmp .Lend_\@", X86_FEATURE_XENPV
+
+ /* Are we on the entry stack? Bail out if not! */
+ movl PER_CPU_VAR(cpu_entry_area), %edi
+ addl $CPU_ENTRY_AREA_entry_stack, %edi
+ cmpl %esp, %edi
+ jae .Lend_\@
+
+ /* Load stack pointer into %esi and %edi */
+ movl %esp, %esi
+ movl %esi, %edi
+
+ /* Move %edi to the top of the entry stack */
+ andl $(MASK_entry_stack), %edi
+ addl $(SIZEOF_entry_stack), %edi
+
+ /* Load top of task-stack into %edi */
+ movl TSS_entry_stack(%edi), %edi
+
+ /* Bytes to copy */
+ movl $PTREGS_SIZE, %ecx
+
+#ifdef CONFIG_VM86
+ testl $X86_EFLAGS_VM, PT_EFLAGS(%esi)
+ jz .Lcopy_pt_regs_\@
+
+ /*
+ * Stack-frame contains 4 additional segment registers when
+ * coming from VM86 mode
+ */
+ addl $(4 * 4), %ecx
+
+.Lcopy_pt_regs_\@:
+#endif
+
+ /* Allocate frame on task-stack */
+ subl %ecx, %edi
+
+ /* Switch to task-stack */
+ movl %edi, %esp
+
+ /*
+ * We are now on the task-stack and can safely copy over the
+ * stack-frame
+ */
+ shrl $2, %ecx
+ cld
+ rep movsl
+
+.Lend_\@:
+.endm
+
/*
* %eax: prev task
* %edx: next task
@@ -454,6 +531,7 @@ ENTRY(xen_sysenter_target)
*/
ENTRY(entry_SYSENTER_32)
movl TSS_entry_stack(%esp), %esp
+
.Lsysenter_past_esp:
pushl $__USER_DS /* pt_regs->ss */
pushl %ebp /* pt_regs->sp (stashed in bp) */
@@ -462,7 +540,7 @@ ENTRY(entry_SYSENTER_32)
pushl $__USER_CS /* pt_regs->cs */
pushl $0 /* pt_regs->ip = 0 (placeholder) */
pushl %eax /* pt_regs->orig_ax */
- SAVE_ALL pt_regs_ax=$-ENOSYS /* save rest */
+ SAVE_ALL pt_regs_ax=$-ENOSYS /* save rest, stack already switched */

/*
* SYSENTER doesn't filter flags, so we need to clear NT, AC
@@ -573,7 +651,8 @@ ENDPROC(entry_SYSENTER_32)
ENTRY(entry_INT80_32)
ASM_CLAC
pushl %eax /* pt_regs->orig_ax */
- SAVE_ALL pt_regs_ax=$-ENOSYS /* save rest */
+
+ SAVE_ALL pt_regs_ax=$-ENOSYS switch_stacks=1 /* save rest */

/*
* User mode is traced as though IRQs are on, and the interrupt gate
@@ -665,7 +744,8 @@ END(irq_entries_start)
common_interrupt:
ASM_CLAC
addl $-0x80, (%esp) /* Adjust vector into the [-256, -1] range */
- SAVE_ALL
+
+ SAVE_ALL switch_stacks=1
ENCODE_FRAME_POINTER
TRACE_IRQS_OFF
movl %esp, %eax
@@ -673,16 +753,16 @@ common_interrupt:
jmp ret_from_intr
ENDPROC(common_interrupt)

-#define BUILD_INTERRUPT3(name, nr, fn) \
-ENTRY(name) \
- ASM_CLAC; \
- pushl $~(nr); \
- SAVE_ALL; \
- ENCODE_FRAME_POINTER; \
- TRACE_IRQS_OFF \
- movl %esp, %eax; \
- call fn; \
- jmp ret_from_intr; \
+#define BUILD_INTERRUPT3(name, nr, fn) \
+ENTRY(name) \
+ ASM_CLAC; \
+ pushl $~(nr); \
+ SAVE_ALL switch_stacks=1; \
+ ENCODE_FRAME_POINTER; \
+ TRACE_IRQS_OFF \
+ movl %esp, %eax; \
+ call fn; \
+ jmp ret_from_intr; \
ENDPROC(name)

#define BUILD_INTERRUPT(name, nr) \
@@ -908,16 +988,20 @@ common_exception:
pushl %es
pushl %ds
pushl %eax
+ movl $(__USER_DS), %eax
+ movl %eax, %ds
+ movl %eax, %es
+ movl $(__KERNEL_PERCPU), %eax
+ movl %eax, %fs
pushl %ebp
pushl %edi
pushl %esi
pushl %edx
pushl %ecx
pushl %ebx
+ SWITCH_TO_KERNEL_STACK
ENCODE_FRAME_POINTER
cld
- movl $(__KERNEL_PERCPU), %ecx
- movl %ecx, %fs
UNWIND_ESPFIX_STACK
GS_TO_REG %ecx
movl PT_GS(%esp), %edi # get the function address
@@ -925,9 +1009,6 @@ common_exception:
movl $-1, PT_ORIG_EAX(%esp) # no syscall to restart
REG_TO_PTGS %ecx
SET_KERNEL_GS %ecx
- movl $(__USER_DS), %ecx
- movl %ecx, %ds
- movl %ecx, %es
TRACE_IRQS_OFF
movl %esp, %eax # pt_regs pointer
CALL_NOSPEC %edi
@@ -946,6 +1027,7 @@ ENTRY(debug)
*/
ASM_CLAC
pushl $-1 # mark this as an int
+
SAVE_ALL
ENCODE_FRAME_POINTER
xorl %edx, %edx # error code 0
@@ -981,6 +1063,7 @@ END(debug)
*/
ENTRY(nmi)
ASM_CLAC
+
#ifdef CONFIG_X86_ESPFIX32
pushl %eax
movl %ss, %eax
@@ -1048,7 +1131,8 @@ END(nmi)
ENTRY(int3)
ASM_CLAC
pushl $-1 # mark this as an int
- SAVE_ALL
+
+ SAVE_ALL switch_stacks=1
ENCODE_FRAME_POINTER
TRACE_IRQS_OFF
xorl %edx, %edx # zero error code
diff --git a/arch/x86/include/asm/switch_to.h b/arch/x86/include/asm/switch_to.h
index eb5f799..20e5f7ab 100644
--- a/arch/x86/include/asm/switch_to.h
+++ b/arch/x86/include/asm/switch_to.h
@@ -89,13 +89,9 @@ static inline void refresh_sysenter_cs(struct thread_struct *thread)
/* This is used when switching tasks or entering/exiting vm86 mode. */
static inline void update_sp0(struct task_struct *task)
{
- /* On x86_64, sp0 always points to the entry trampoline stack, which is constant: */
-#ifdef CONFIG_X86_32
- load_sp0(task->thread.sp0);
-#else
+ /* sp0 always points to the entry trampoline stack, which is constant: */
if (static_cpu_has(X86_FEATURE_XENPV))
load_sp0(task_top_of_stack(task));
-#endif
}

#endif /* _ASM_X86_SWITCH_TO_H */
diff --git a/arch/x86/kernel/asm-offsets.c b/arch/x86/kernel/asm-offsets.c
index 232152c..86f06e8 100644
--- a/arch/x86/kernel/asm-offsets.c
+++ b/arch/x86/kernel/asm-offsets.c
@@ -103,6 +103,7 @@ void common(void) {
OFFSET(CPU_ENTRY_AREA_entry_trampoline, cpu_entry_area, entry_trampoline);
OFFSET(CPU_ENTRY_AREA_entry_stack, cpu_entry_area, entry_stack_page);
DEFINE(SIZEOF_entry_stack, sizeof(struct entry_stack));
+ DEFINE(MASK_entry_stack, (~(sizeof(struct entry_stack) - 1)));

/* Offset for sp0 and sp1 into the tss_struct */
OFFSET(TSS_sp0, tss_struct, x86_tss.sp0);
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index d63f4b57..a0ed348 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1709,11 +1709,12 @@ void cpu_init(void)
enter_lazy_tlb(&init_mm, curr);

/*
- * Initialize the TSS. Don't bother initializing sp0, as the initial
- * task never enters user mode.
+ * Initialize the TSS. sp0 points to the entry trampoline stack
+ * regardless of what task is running.
*/
set_tss_desc(cpu, &get_cpu_entry_area(cpu)->tss.x86_tss);
load_TR_desc();
+ load_sp0((unsigned long)(cpu_entry_stack(cpu) + 1));

load_mm_ldt(&init_mm);

diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index cb368c2..7fab4fa 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -57,14 +57,12 @@ __visible DEFINE_PER_CPU_PAGE_ALIGNED(struct tss_struct, cpu_tss_rw) = {
*/
.sp0 = (1UL << (BITS_PER_LONG-1)) + 1,

-#ifdef CONFIG_X86_64
/*
* .sp1 is cpu_current_top_of_stack. The init task never
* runs user code, but cpu_current_top_of_stack should still
* be well defined before the first context switch.
*/
.sp1 = TOP_OF_INIT_STACK,
-#endif

#ifdef CONFIG_X86_32
.ss0 = __KERNEL_DS,
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 097d36a..3f3a8c6 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -289,10 +289,12 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
*/
update_sp0(next_p);
refresh_sysenter_cs(next);
- this_cpu_write(cpu_current_top_of_stack,
- (unsigned long)task_stack_page(next_p) +
- THREAD_SIZE);
- /* SYSENTER reads the task-stack from tss.sp1 */
+ this_cpu_write(cpu_current_top_of_stack, task_top_of_stack(next_p));
+ /*
+ * TODO: Find a way to let cpu_current_top_of_stack point to
+ * cpu_tss_rw.x86_tss.sp1. Doing so now results in stack corruption with
+ * iret exceptions.
+ */
this_cpu_write(cpu_tss_rw.x86_tss.sp1, next_p->thread.sp0);

/*
--
2.7.4

Next message: Joerg Roedel: "[PATCH 07/34] x86/entry/32: Restore segments before int registers"
Previous message: Joerg Roedel: "[PATCH 11/34] x86/entry/32: Handle Entry from Kernel-Mode on Entry-Stack"
In reply to: Joerg Roedel: "Re: [PATCH 11/34] x86/entry/32: Handle Entry from Kernel-Mode on Entry-Stack"
Next in thread: Joerg Roedel: "[PATCH 07/34] x86/entry/32: Restore segments before int registers"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]