RE: [PATCH v5 3/4] drivers: firmware: xilinx: Add sysfs interface

[Jolly Shah]

Hi Sudeep,


> -----Original Message-----
> From: Sudeep Holla [mailto:sudeep.holla@xxxxxxx]
> Sent: Thursday, March 01, 2018 6:44 AM
> To: Jolly Shah <JOLLYS@xxxxxxxxxx>
> Cc: ard.biesheuvel@xxxxxxxxxx; mingo@xxxxxxxxxx;
> gregkh@xxxxxxxxxxxxxxxxxxx; matt@xxxxxxxxxxxxxxxxxxx;
> hkallweit1@xxxxxxxxx; keescook@xxxxxxxxxxxx;
> dmitry.torokhov@xxxxxxxxx; michal.simek@xxxxxxxxxx; robh+dt@xxxxxxxxxx;
> mark.rutland@xxxxxxx; Sudeep Holla <sudeep.holla@xxxxxxx>; Rajan Vaja
> <RAJANV@xxxxxxxxxx>; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux-
> kernel@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; Jolly Shah
> <JOLLYS@xxxxxxxxxx>
> Subject: Re: [PATCH v5 3/4] drivers: firmware: xilinx: Add sysfs interface
> 
> 
> 
> On 20/02/18 19:21, Jolly Shah wrote:
> > Add Firmware-ggs sysfs interface which provides read/write interface
> > to global storage registers.
> >
> > Signed-off-by: Jolly Shah <jollys@xxxxxxxxxx>
> > Signed-off-by: Rajan Vaja <rajanv@xxxxxxxxxx>
> > ---
> >  .../ABI/stable/sysfs-driver-zynqmp-firmware        |  50 ++++
> >  drivers/firmware/xilinx/zynqmp/Makefile            |   2 +-
> >  drivers/firmware/xilinx/zynqmp/firmware-ggs.c      | 297
> +++++++++++++++++++++
> >  drivers/firmware/xilinx/zynqmp/firmware.c          |  13 +
> >  include/linux/firmware/xilinx/zynqmp/firmware.h    |   2 +
> >  5 files changed, 363 insertions(+), 1 deletion(-)  create mode 100644
> > Documentation/ABI/stable/sysfs-driver-zynqmp-firmware
> >  create mode 100644 drivers/firmware/xilinx/zynqmp/firmware-ggs.c
> >
> > diff --git a/Documentation/ABI/stable/sysfs-driver-zynqmp-firmware
> > b/Documentation/ABI/stable/sysfs-driver-zynqmp-firmware
> > new file mode 100644
> > index 0000000..b04727a
> > --- /dev/null
> > +++ b/Documentation/ABI/stable/sysfs-driver-zynqmp-firmware
> > @@ -0,0 +1,50 @@
> > +What:		/sys/devices/platform/zynqmp-firmware/ggs> +Date:
> 		January 2018
> > +KernelVersion:	4.15.0
> > +Contact:	"Jolly Shah" <jollys@xxxxxxxxxx>
> > +Description:
> > +		Read/Write PMU global general storage register value,
> > +		GLOBAL_GEN_STORAGE{0:3}.
> > +		Global general storage register that can be used
> > +		by system to pass information between masters.
> > +
> 
> What kind of information ? Is there any semantics for that ?
> Why does EEMI lack APIs for that if it's critical, giving access to such information
> to userspace may not be good idea.
> 	

These are for general use. Information being passed can be application specific.
Sysfs call underneath maps to EEMI ioctl call to read/write these registers.

> > +		The register is reset during system or power-on
> > +		resets. Three registers are used by the FSBL and
> > +		other Xilinx software products: GLOBAL_GEN_STORAGE{4:6}.
> > +
> 
> FSBL ?
> 
> For what is it used ?

There are total 8 such registers. 4 are reserved for customer application. Other 4 are being used by Xilinx sw products like FSBL.
FSBL is using it to pass handoff information to other master.

> 
> > +		Usage:
> > +		# cat /sys/.../zynqmp-firmware/ggs0
> > +		# echo <mask> <value> > /sys/.../zynqmp-firmware/ggs0
> > +
> > +		Example:
> > +		# cat /sys/.../zynqmp-firmware/ggs0
> > +		# echo 0xFFFFFFFF 0x1234ABCD > /sys/.../zynqmp-
> firmware/ggs0
> > +
> > +Users:		Xilinx
> > +
> > +What:		/sys/devices/platform/zynqmp-firmware/pggs*
> > +Date:		January 2018
> > +KernelVersion:	4.15.0
> > +Contact:	"Jolly Shah" <jollys@xxxxxxxxxx>
> > +Description:
> > +		Read/Write PMU persistent global general storage register
> > +		value, PERS_GLOB_GEN_STORAGE{0:3}.
> > +		Persistent global general storage register that
> > +		can be used by system to pass information between
> > +		masters.
> > +
> 
> Ditto
> 
> > +		This register is only reset by the power-on reset
> > +		and maintains its value through a system reset.
> > +		Four registers are used by the FSBL and other Xilinx
> > +		software products: PERS_GLOB_GEN_STORAGE{4:7}.
> > +		Register is reset only by a POR reset.
> > +
> 
> Ditto
> 
> --
> Regards,
> Sudeep