[PATCH] net: phy: Move interrupt check from phy_check to phy_interrupt
From: Brad Mouring
Date: Wed Mar 07 2018 - 17:51:00 EST
If multiple phys share the same interrupt (e.g. a multi-phy chip),
the first device registered is the only one checked as phy_interrupt
will always return IRQ_HANDLED if the first phydev is not halted.
Move the interrupt check into phy_interrupt and, if it was not this
phydev, return IRQ_NONE to allow other devices on this irq a chance
to check if it was their interrupt.
Signed-off-by: Brad Mouring <brad.mouring@xxxxxx>
---
drivers/net/phy/phy.c | 16 ++++++----------
1 file changed, 6 insertions(+), 10 deletions(-)
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index e3e29c2b028b..ff1aa815568f 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -632,6 +632,12 @@ static irqreturn_t phy_interrupt(int irq, void *phy_dat)
if (PHY_HALTED == phydev->state)
return IRQ_NONE; /* It can't be ours. */
+ if (phy_interrupt_is_valid(phydev)) {
+ if (phydev->drv->did_interrupt &&
+ !phydev->drv->did_interrupt(phydev))
+ return IRQ_NONE;
+ }
+
phy_change(phydev);
return IRQ_HANDLED;
@@ -725,16 +731,6 @@ EXPORT_SYMBOL(phy_stop_interrupts);
*/
void phy_change(struct phy_device *phydev)
{
- if (phy_interrupt_is_valid(phydev)) {
- if (phydev->drv->did_interrupt &&
- !phydev->drv->did_interrupt(phydev))
- return;
-
- if (phydev->state == PHY_HALTED)
- if (phy_disable_interrupts(phydev))
- goto phy_err;
- }
-
mutex_lock(&phydev->lock);
if ((PHY_RUNNING == phydev->state) || (PHY_NOLINK == phydev->state))
phydev->state = PHY_CHANGELINK;
--
2.16.2