[PATCH net-next] net: stmmac: remove superfluous wmb() memory barriers
From: Niklas Cassel
Date: Thu Mar 08 2018 - 05:30:20 EST
These wmb() memory barriers are performed after the last descriptor write,
and they are followed by enable_dma_transmission()/set_tx_tail_ptr(),
i.e. a writel() to MMIO register space.
Since writel() itself performs the equivalent of a wmb() before doing the
actual write, these barriers are superfluous, and removing them should
thus not change any existing behavior.
Ordering within the descriptor writes is already ensured with dma_wmb()
barriers inside prepare_tx_desc(first, ..)/prepare_tso_tx_desc(first, ..).
Signed-off-by: Niklas Cassel <niklas.cassel@xxxxxxxx>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 12 ------------
1 file changed, 12 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index a9856a8bf8ad..005fb45ace30 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -2998,12 +2998,6 @@ static netdev_tx_t stmmac_tso_xmit(struct sk_buff *skb, struct net_device *dev)
priv->hw->desc->set_tx_owner(mss_desc);
}
- /* The own bit must be the latest setting done when prepare the
- * descriptor and then barrier is needed to make sure that
- * all is coherent before granting the DMA engine.
- */
- wmb();
-
if (netif_msg_pktdata(priv)) {
pr_info("%s: curr=%d dirty=%d f=%d, e=%d, f_p=%p, nfrags %d\n",
__func__, tx_q->cur_tx, tx_q->dirty_tx, first_entry,
@@ -3221,12 +3215,6 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
priv->hw->desc->prepare_tx_desc(first, 1, nopaged_len,
csum_insertion, priv->mode, 1,
last_segment, skb->len);
-
- /* The own bit must be the latest setting done when prepare the
- * descriptor and then barrier is needed to make sure that
- * all is coherent before granting the DMA engine.
- */
- wmb();
}
netdev_tx_sent_queue(netdev_get_tx_queue(dev, queue), skb->len);
--
2.14.2