[PATCH v4] Staging: iio: adis16209: Change some macro names

[Shreeya Patel]

Make some of the macro names according to the names
given in the datasheet of the adis16209 driver and
have slight indentation in field definitions to make
them clearly different from the register addresses.

Signed-off-by: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
---

Changes in v4
  -Have slight indentation in field definitions.

 drivers/staging/iio/accel/adis16209.c | 48 +++++++++++++++++------------------
 1 file changed, 24 insertions(+), 24 deletions(-)

diff --git a/drivers/staging/iio/accel/adis16209.c b/drivers/staging/iio/accel/adis16209.c
index eb5c878..19636e2 100644
--- a/drivers/staging/iio/accel/adis16209.c
+++ b/drivers/staging/iio/accel/adis16209.c
@@ -68,21 +68,21 @@
 #define  ADIS16209_MSC_CTRL_ACTIVE_HIGH		BIT(1)
 #define  ADIS16209_MSC_CTRL_DATA_RDY_DIO2	BIT(0)
 
-#define ADIS16209_STAT_REG			0x3C
-#define  ADIS16209_STAT_ALARM2			BIT(9)
-#define  ADIS16209_STAT_ALARM1			BIT(8)
-#define ADIS16209_STAT_SELFTEST_FAIL_BIT	5
-#define ADIS16209_STAT_SPI_FAIL_BIT		3
-#define ADIS16209_STAT_FLASH_UPT_FAIL_BIT	2
+#define ADIS16209_DIAG_STAT_REG			0x3C
+#define  ADIS16209_DIAG_STAT_ALARM2		BIT(9)
+#define  ADIS16209_DIAG_STAT_ALARM1		BIT(8)
+#define  ADIS16209_DIAG_STAT_SELFTEST_FAIL_BIT	5
+#define  ADIS16209_DIAG_STAT_SPI_FAIL_BIT	3
+#define  ADIS16209_DIAG_STAT_FLASH_UPT_BIT	2
 /* Power supply above 3.625 V */
-#define ADIS16209_STAT_POWER_HIGH_BIT		1
+#define  ADIS16209_DIAG_STAT_POWER_HIGH_BIT	1
 /* Power supply below 3.15 V */
-#define ADIS16209_STAT_POWER_LOW_BIT		0
+#define  ADIS16209_DIAG_STAT_POWER_LOW_BIT	0
 
-#define ADIS16209_CMD_REG			0x3E
-#define  ADIS16209_CMD_SW_RESET			BIT(7)
-#define  ADIS16209_CMD_CLEAR_STAT		BIT(4)
-#define  ADIS16209_CMD_FACTORY_CAL		BIT(1)
+#define ADIS16209_GLOB_CMD_REG			0x3E
+#define  ADIS16209_GLOB_CMD_SW_RESET		BIT(7)
+#define  ADIS16209_GLOB_CMD_CLEAR_STAT		BIT(4)
+#define  ADIS16209_GLOB_CMD_FACTORY_CAL		BIT(1)
 
 #define ADIS16209_ERROR_ACTIVE			BIT(14)
 
@@ -238,29 +238,29 @@ static const struct iio_info adis16209_info = {
 };
 
 static const char * const adis16209_status_error_msgs[] = {
-	[ADIS16209_STAT_SELFTEST_FAIL_BIT] = "Self test failure",
-	[ADIS16209_STAT_SPI_FAIL_BIT] = "SPI failure",
-	[ADIS16209_STAT_FLASH_UPT_FAIL_BIT] = "Flash update failed",
-	[ADIS16209_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V",
-	[ADIS16209_STAT_POWER_LOW_BIT] = "Power supply below 3.15V",
+	[ADIS16209_DIAG_STAT_SELFTEST_FAIL_BIT] = "Self test failure",
+	[ADIS16209_DIAG_STAT_SPI_FAIL_BIT] = "SPI failure",
+	[ADIS16209_DIAG_STAT_FLASH_UPT_BIT] = "Flash update failed",
+	[ADIS16209_DIAG_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V",
+	[ADIS16209_DIAG_STAT_POWER_LOW_BIT] = "Power supply below 3.15V",
 };
 
 static const struct adis_data adis16209_data = {
 	.read_delay = 30,
 	.msc_ctrl_reg = ADIS16209_MSC_CTRL_REG,
-	.glob_cmd_reg = ADIS16209_CMD_REG,
-	.diag_stat_reg = ADIS16209_STAT_REG,
+	.glob_cmd_reg = ADIS16209_GLOB_CMD_REG,
+	.diag_stat_reg = ADIS16209_DIAG_STAT_REG,
 
 	.self_test_mask = ADIS16209_MSC_CTRL_SELF_TEST_EN,
 	.self_test_no_autoclear = true,
 	.startup_delay = ADIS16209_STARTUP_DELAY_MS,
 
 	.status_error_msgs = adis16209_status_error_msgs,
-	.status_error_mask = BIT(ADIS16209_STAT_SELFTEST_FAIL_BIT) |
-		BIT(ADIS16209_STAT_SPI_FAIL_BIT) |
-		BIT(ADIS16209_STAT_FLASH_UPT_FAIL_BIT) |
-		BIT(ADIS16209_STAT_POWER_HIGH_BIT) |
-		BIT(ADIS16209_STAT_POWER_LOW_BIT),
+	.status_error_mask = BIT(ADIS16209_DIAG_STAT_SELFTEST_FAIL_BIT) |
+		BIT(ADIS16209_DIAG_STAT_SPI_FAIL_BIT) |
+		BIT(ADIS16209_DIAG_STAT_FLASH_UPT_BIT) |
+		BIT(ADIS16209_DIAG_STAT_POWER_HIGH_BIT) |
+		BIT(ADIS16209_DIAG_STAT_POWER_LOW_BIT),
 };
 
 static int adis16209_probe(struct spi_device *spi)
-- 
2.7.4