Re: [PATCH] net: phy: Move interrupt check from phy_check to phy_interrupt

[Sergei Shtylyov]

On 03/08/2018 01:50 AM, Brad Mouring wrote:

> If multiple phys share the same interrupt (e.g. a multi-phy chip),
> the first device registered is the only one checked as phy_interrupt
> will always return IRQ_HANDLED if the first phydev is not halted.
> Move the interrupt check into phy_interrupt and, if it was not this
> phydev, return IRQ_NONE to allow other devices on this irq a chance
> to check if it was their interrupt.
> 
> Signed-off-by: Brad Mouring <brad.mouring@xxxxxx>
> ---
>  drivers/net/phy/phy.c | 16 ++++++----------
>  1 file changed, 6 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
> index e3e29c2b028b..ff1aa815568f 100644
> --- a/drivers/net/phy/phy.c
> +++ b/drivers/net/phy/phy.c
> @@ -632,6 +632,12 @@ static irqreturn_t phy_interrupt(int irq, void *phy_dat)
>  	if (PHY_HALTED == phydev->state)
>  		return IRQ_NONE;		/* It can't be ours.  */
>  
> +	if (phy_interrupt_is_valid(phydev)) {
> +		if (phydev->drv->did_interrupt &&
> +			!phydev->drv->did_interrupt(phydev))

   Forgot to mention: DaveM prefers that continuation lines start under the 1st
column after ( on the broken up line. The way you did it this line blends with
the next one (they shouldn't).

> +			return IRQ_NONE;
> +	}
> +
>  	phy_change(phydev);
>  
>  	return IRQ_HANDLED;
[...]

MBR, Sergei