[PATCH v2 03/13] PCI/PM: Clear PCIe PME Status bit in core, not PCIe port driver

[Bjorn Helgaas]

From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>

fe31e69740ed ("PCI/PCIe: Clear Root PME Status bits early during system
resume") added a .resume_noirq() callback to the PCIe port driver to clear
the PME Status bit during resume to work around a BIOS issue.

The BIOS evidently enabled PME interrupts for ACPI-based runtime wakeups
but did not clear the PME Status bit during resume, which meant PMEs after
resume did not trigger interrupts because PME Status did not transition
from cleared to set.

The fix was in the PCIe port driver, so it worked when CONFIG_PCIEPORTBUS
was set.  But I think we *always* want the fix because the platform may use
PME interrupts even if Linux is built without the PCIe port driver.

Move the fix from the port driver to the PCI core so we can work around
this "PME doesn't work after waking from a sleep state" issue regardless of
CONFIG_PCIEPORTBUS.

Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
---
 drivers/pci/pci-driver.c       |   14 ++++++++++++++
 drivers/pci/pcie/portdrv_pci.c |   15 ---------------
 2 files changed, 14 insertions(+), 15 deletions(-)

diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 3bed6beda051..e561fa0f456c 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -525,6 +525,18 @@ static void pci_pm_default_resume_early(struct pci_dev *pci_dev)
 	pci_fixup_device(pci_fixup_resume_early, pci_dev);
 }
 
+static void pcie_pme_root_status_cleanup(struct pci_dev *pci_dev)
+{
+	/*
+	 * Some BIOSes forget to clear Root PME Status bits after system
+	 * wakeup, which breaks ACPI-based runtime wakeup on PCI Express.
+	 * Clear those bits now just in case (shouldn't hurt).
+	 */
+	if (pci_is_pcie(pci_dev) &&
+	    pci_pcie_type(pci_dev) == PCI_EXP_TYPE_ROOT_PORT)
+		pcie_clear_root_pme_status(pci_dev);
+}
+
 /*
  * Default "suspend" method for devices that have no driver provided suspend,
  * or not even a driver at all (second part).
@@ -873,6 +885,8 @@ static int pci_pm_resume_noirq(struct device *dev)
 	if (pci_has_legacy_pm_support(pci_dev))
 		return pci_legacy_resume_early(dev);
 
+	pcie_pme_root_status_cleanup(pci_dev);
+
 	if (drv && drv->pm && drv->pm->resume_noirq)
 		error = drv->pm->resume_noirq(dev);
 
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index d6f10a97d400..ec9e936c2a5b 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -61,20 +61,6 @@ static int pcie_portdrv_restore_config(struct pci_dev *dev)
 }
 
 #ifdef CONFIG_PM
-static int pcie_port_resume_noirq(struct device *dev)
-{
-	struct pci_dev *pdev = to_pci_dev(dev);
-
-	/*
-	 * Some BIOSes forget to clear Root PME Status bits after system wakeup
-	 * which breaks ACPI-based runtime wakeup on PCI Express, so clear those
-	 * bits now just in case (shouldn't hurt).
-	 */
-	if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT)
-		pcie_clear_root_pme_status(pdev);
-	return 0;
-}
-
 static int pcie_port_runtime_suspend(struct device *dev)
 {
 	return to_pci_dev(dev)->bridge_d3 ? 0 : -EBUSY;
@@ -102,7 +88,6 @@ static const struct dev_pm_ops pcie_portdrv_pm_ops = {
 	.thaw		= pcie_port_device_resume,
 	.poweroff	= pcie_port_device_suspend,
 	.restore	= pcie_port_device_resume,
-	.resume_noirq	= pcie_port_resume_noirq,
 	.runtime_suspend = pcie_port_runtime_suspend,
 	.runtime_resume	= pcie_port_runtime_resume,
 	.runtime_idle	= pcie_port_runtime_idle,