Re: [PATCH v5 1/3] Input: gpio-keys - add support for wakeup event action

[Rob Herring]

On Thu, Mar 08, 2018 at 03:32:11PM +0800, Jeffy Chen wrote:
> Add support for specifying event actions to trigger wakeup when using
> the gpio-keys input device as a wakeup source.
> 
> This would allow the device to configure when to wakeup the system. For
> example a gpio-keys input device for pen insert, may only want to wakeup
> the system when ejecting the pen.
> 
> Suggested-by: Brian Norris <briannorris@xxxxxxxxxxxx>
> Signed-off-by: Jeffy Chen <jeffy.chen@xxxxxxxxxxxxxx>
> ---
> 
> Changes in v5:
> Remove unneeded irq_wake flag as Andy suggested.
> 
> Changes in v4:
> Add dt-binding gpio-keys.h, stop saving irq trigger type, add enable/disable wakeup helpers as Dmitry suggested.
> 
> Changes in v3:
> Adding more comments as Brian suggested.
> 
> Changes in v2:
> Specify wakeup event action instead of irq trigger type as Brian
> suggested.
> 
>  drivers/input/keyboard/gpio_keys.c    | 63 +++++++++++++++++++++++++++++++++--
>  include/dt-bindings/input/gpio-keys.h | 13 ++++++++

This file should be in the binding patch.

>  include/linux/gpio_keys.h             |  2 ++
>  3 files changed, 75 insertions(+), 3 deletions(-)
>  create mode 100644 include/dt-bindings/input/gpio-keys.h