Re: [PATCH 2/2] iio: potentiometer: mcp4018: driver for Microchip digital potentiometers
From: Jonathan Cameron
Date: Sat Mar 10 2018 - 11:15:23 EST
On Thu, 8 Mar 2018 20:58:30 +0100
Peter Rosin <peda@xxxxxxxxxx> wrote:
> Add support for Microchip digital potentiometers and rheostats
> MCP4017, MCP4018, MCP4019
>
> They all have one wiper with 128 steps and come in 5, 10, 50 and 100 kOhm
> variations.
>
> Datasheet: http://www.microchip.com/downloads/en/DeviceDoc/22147a.pdf
>
> Signed-off-by: Peter Rosin <peda@xxxxxxxxxx>
Nice little driver.
Applied to the togreg branch of iio.git and pushed out as testing
for the autobuilders to play with it.
Thanks,
Jonathan
> ---
> MAINTAINERS | 3 +-
> drivers/iio/potentiometer/Kconfig | 11 ++
> drivers/iio/potentiometer/Makefile | 1 +
> drivers/iio/potentiometer/mcp4018.c | 194 ++++++++++++++++++++++++++++++++++++
> 4 files changed, 208 insertions(+), 1 deletion(-)
> create mode 100644 drivers/iio/potentiometer/mcp4018.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 4623caf8d72d..81527c75adee 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -8589,11 +8589,12 @@ W: https://linuxtv.org
> S: Maintained
> F: drivers/media/radio/radio-maxiradio*
>
> -MCP4531 MICROCHIP DIGITAL POTENTIOMETER DRIVER
> +MCP4018 AND MCP4531 MICROCHIP DIGITAL POTENTIOMETER DRIVERS
> M: Peter Rosin <peda@xxxxxxxxxx>
> L: linux-iio@xxxxxxxxxxxxxxx
> S: Maintained
> F: Documentation/ABI/testing/sysfs-bus-iio-potentiometer-mcp4531
> +F: drivers/iio/potentiometer/mcp4018.c
> F: drivers/iio/potentiometer/mcp4531.c
>
> MEASUREMENT COMPUTING CIO-DAC IIO DRIVER
> diff --git a/drivers/iio/potentiometer/Kconfig b/drivers/iio/potentiometer/Kconfig
> index 8bf282510be6..84bdbcd53114 100644
> --- a/drivers/iio/potentiometer/Kconfig
> +++ b/drivers/iio/potentiometer/Kconfig
> @@ -37,6 +37,17 @@ config MAX5487
> To compile this driver as a module, choose M here: the
> module will be called max5487.
>
> +config MCP4018
> + tristate "Microchip MCP4017/18/19 Digital Potentiometer driver"
> + depends on I2Cs
> + help
> + Say yes here to build support for the Microchip
> + MCP4017, MCP4018, MCP4019
> + digital potentiometer chips.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called mcp4018.
> +
> config MCP4131
> tristate "Microchip MCP413X/414X/415X/416X/423X/424X/425X/426X Digital Potentiometer driver"
> depends on SPI
> diff --git a/drivers/iio/potentiometer/Makefile b/drivers/iio/potentiometer/Makefile
> index 1afd1e70f8cc..0cff8a2916d5 100644
> --- a/drivers/iio/potentiometer/Makefile
> +++ b/drivers/iio/potentiometer/Makefile
> @@ -7,6 +7,7 @@
> obj-$(CONFIG_DS1803) += ds1803.o
> obj-$(CONFIG_MAX5481) += max5481.o
> obj-$(CONFIG_MAX5487) += max5487.o
> +obj-$(CONFIG_MCP4018) += mcp4018.o
> obj-$(CONFIG_MCP4131) += mcp4131.o
> obj-$(CONFIG_MCP4531) += mcp4531.o
> obj-$(CONFIG_TPL0102) += tpl0102.o
> diff --git a/drivers/iio/potentiometer/mcp4018.c b/drivers/iio/potentiometer/mcp4018.c
> new file mode 100644
> index 000000000000..601b25d1f387
> --- /dev/null
> +++ b/drivers/iio/potentiometer/mcp4018.c
> @@ -0,0 +1,194 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Industrial I/O driver for Microchip digital potentiometers
> + * Copyright (c) 2018 Axentia Technologies AB
> + * Author: Peter Rosin <peda@xxxxxxxxxx>
> + *
> + * Datasheet: http://www.microchip.com/downloads/en/DeviceDoc/22147a.pdf
> + *
> + * DEVID #Wipers #Positions Resistor Opts (kOhm)
> + * mcp4017 1 128 5, 10, 50, 100
> + * mcp4018 1 128 5, 10, 50, 100
> + * mcp4019 1 128 5, 10, 50, 100
> + */
> +
> +#include <linux/err.h>
> +#include <linux/i2c.h>
> +#include <linux/iio/iio.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +
> +#define MCP4018_WIPER_MAX 127
> +
> +struct mcp4018_cfg {
> + int kohms;
> +};
> +
> +enum mcp4018_type {
> + MCP4018_502,
> + MCP4018_103,
> + MCP4018_503,
> + MCP4018_104,
> +};
> +
> +static const struct mcp4018_cfg mcp4018_cfg[] = {
> + [MCP4018_502] = { .kohms = 5, },
> + [MCP4018_103] = { .kohms = 10, },
> + [MCP4018_503] = { .kohms = 50, },
> + [MCP4018_104] = { .kohms = 100, },
> +};
> +
> +struct mcp4018_data {
> + struct i2c_client *client;
> + const struct mcp4018_cfg *cfg;
> +};
> +
> +static const struct iio_chan_spec mcp4018_channel = {
> + .type = IIO_RESISTANCE,
> + .indexed = 1,
> + .output = 1,
> + .channel = 0,
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
> +};
> +
> +static int mcp4018_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int *val, int *val2, long mask)
> +{
> + struct mcp4018_data *data = iio_priv(indio_dev);
> + s32 ret;
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_RAW:
> + ret = i2c_smbus_read_byte(data->client);
> + if (ret < 0)
> + return ret;
> + *val = ret;
> + return IIO_VAL_INT;
> + case IIO_CHAN_INFO_SCALE:
> + *val = 1000 * data->cfg->kohms;
> + *val2 = MCP4018_WIPER_MAX;
> + return IIO_VAL_FRACTIONAL;
> + }
> +
> + return -EINVAL;
> +}
> +
> +static int mcp4018_write_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int val, int val2, long mask)
> +{
> + struct mcp4018_data *data = iio_priv(indio_dev);
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_RAW:
> + if (val > MCP4018_WIPER_MAX || val < 0)
> + return -EINVAL;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return i2c_smbus_write_byte(data->client, val);
> +}
> +
> +static const struct iio_info mcp4018_info = {
> + .read_raw = mcp4018_read_raw,
> + .write_raw = mcp4018_write_raw,
> +};
> +
> +#ifdef CONFIG_OF
> +
> +#define MCP4018_COMPATIBLE(of_compatible, cfg) { \
> + .compatible = of_compatible, \
> + .data = &mcp4018_cfg[cfg], \
> +}
> +
> +static const struct of_device_id mcp4018_of_match[] = {
> + MCP4018_COMPATIBLE("microchip,mcp4017-502", MCP4018_502),
> + MCP4018_COMPATIBLE("microchip,mcp4017-103", MCP4018_103),
> + MCP4018_COMPATIBLE("microchip,mcp4017-503", MCP4018_503),
> + MCP4018_COMPATIBLE("microchip,mcp4017-104", MCP4018_104),
> + MCP4018_COMPATIBLE("microchip,mcp4018-502", MCP4018_502),
> + MCP4018_COMPATIBLE("microchip,mcp4018-103", MCP4018_103),
> + MCP4018_COMPATIBLE("microchip,mcp4018-503", MCP4018_503),
> + MCP4018_COMPATIBLE("microchip,mcp4018-104", MCP4018_104),
> + MCP4018_COMPATIBLE("microchip,mcp4019-502", MCP4018_502),
> + MCP4018_COMPATIBLE("microchip,mcp4019-103", MCP4018_103),
> + MCP4018_COMPATIBLE("microchip,mcp4019-503", MCP4018_503),
> + MCP4018_COMPATIBLE("microchip,mcp4019-104", MCP4018_104),
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, mcp4018_of_match);
> +
> +#endif
> +
> +static int mcp4018_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct device *dev = &client->dev;
> + struct mcp4018_data *data;
> + struct iio_dev *indio_dev;
> + const struct of_device_id *match;
> +
> + if (!i2c_check_functionality(client->adapter,
> + I2C_FUNC_SMBUS_BYTE)) {
> + dev_err(dev, "SMBUS Byte transfers not supported\n");
> + return -EOPNOTSUPP;
> + }
> +
> + indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
> + if (!indio_dev)
> + return -ENOMEM;
> + data = iio_priv(indio_dev);
> + i2c_set_clientdata(client, indio_dev);
> + data->client = client;
> +
> + match = of_match_device(of_match_ptr(mcp4018_of_match), dev);
> + if (match)
> + data->cfg = of_device_get_match_data(dev);
> + else
> + data->cfg = &mcp4018_cfg[id->driver_data];
> +
> + indio_dev->dev.parent = dev;
> + indio_dev->info = &mcp4018_info;
> + indio_dev->channels = &mcp4018_channel;
> + indio_dev->num_channels = 1;
> + indio_dev->name = client->name;
> +
> + return devm_iio_device_register(dev, indio_dev);
> +}
> +
> +static const struct i2c_device_id mcp4018_id[] = {
> + { "mcp4017-502", MCP4018_502 },
> + { "mcp4017-103", MCP4018_103 },
> + { "mcp4017-503", MCP4018_503 },
> + { "mcp4017-104", MCP4018_104 },
> + { "mcp4018-502", MCP4018_502 },
> + { "mcp4018-103", MCP4018_103 },
> + { "mcp4018-503", MCP4018_503 },
> + { "mcp4018-104", MCP4018_104 },
> + { "mcp4019-502", MCP4018_502 },
> + { "mcp4019-103", MCP4018_103 },
> + { "mcp4019-503", MCP4018_503 },
> + { "mcp4019-104", MCP4018_104 },
> + {}
> +};
> +MODULE_DEVICE_TABLE(i2c, mcp4018_id);
> +
> +static struct i2c_driver mcp4018_driver = {
> + .driver = {
> + .name = "mcp4018",
> + .of_match_table = of_match_ptr(mcp4018_of_match),
> + },
> + .probe = mcp4018_probe,
> + .id_table = mcp4018_id,
> +};
> +
> +module_i2c_driver(mcp4018_driver);
> +
> +MODULE_AUTHOR("Peter Rosin <peda@xxxxxxxxxx>");
> +MODULE_DESCRIPTION("MCP4018 digital potentiometer");
> +MODULE_LICENSE("GPL");