[PATCH v2 0/2] iio: chemical: sgp30: Support SGP30 / SGPC3 Gas Sensors
From: Andreas Brauchli
Date: Sat Mar 10 2018 - 17:07:03 EST
This patch series adds support for Sensirion SGP30 and SGPC3 I2C gas
sensors.
Further product specs available from:
https://www.sensirion.com/en/environmental-sensors/gas-sensors/multi-pixel-gas-sensors/
https://www.sensirion.com/en/about-us/links/#c15360
Patch 1/2 add new IIO modifiers used by the driver
Patch 2/2 add sgp30/sgpc3 driver and documentation
Major changes to v1:
* Driver renamed to sgp30
* No or minimal sensor knowledge required to use the device:
automatic fixed interval polling (see next point) and initialization.
* Background thread for IAQ polling
* Remove triggered-buffers support
* Add new IIO modifiers for ethanol and H2
* Support for SGPC3 product increment ("feature set 0.6") including
humidity compensation and an ultra-low power mode. Unfortunately, the
datasheet for this new SGPC3 has not been released yet.
* ABI/DT Documentation
Many thanks to Peter Meerwald-Standler and Jonathan Cameron for their most valuable feedback on v1.
Andreas Brauchli (2):
iio: Add modifiers for ethanol and H2 gases
iio: chemical: sgp30: Support Sensirion SGPxx sensors
Documentation/ABI/testing/sysfs-bus-iio | 4 +
.../ABI/testing/sysfs-bus-iio-chemical-sgp30 | 62 ++
.../bindings/iio/chemical/sensirion,sgp30.txt | 15 +
Documentation/iio/chemical/sgp30.txt | 97 ++
drivers/iio/chemical/Kconfig | 13 +
drivers/iio/chemical/Makefile | 1 +
drivers/iio/chemical/sgp30.c | 1120 ++++++++++++++++++++
include/uapi/linux/iio/types.h | 2 +
tools/iio/iio_event_monitor.c | 4 +
9 files changed, 1318 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-chemical-sgp30
create mode 100644 Documentation/devicetree/bindings/iio/chemical/sensirion,sgp30.txt
create mode 100644 Documentation/iio/chemical/sgp30.txt
create mode 100644 drivers/iio/chemical/sgp30.c
--
2.15.1