Re: [PATCH 3/3] staging:iio:ad2s1210: Add write_raw to handle frequency

From: Dan Carpenter
Date: Tue Mar 13 2018 - 05:04:14 EST


On Mon, Mar 12, 2018 at 03:21:52PM -0300, Rodrigo Siqueira wrote:
> The write interface of AD2S1210 utilizes IIO_DEVICE_ATTR, which violate
> the official IIO ABI. This patch, add the write_raw function responsible
> for handling the fclkin and fexcit channel; also it removes the use of
> IIO_DEVICE_ATTR for fclkin and fexcit.
>
> Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@xxxxxxxxx>
> ---
> drivers/staging/iio/resolver/ad2s1210.c | 117 +++++++++++++++-----------------
> 1 file changed, 55 insertions(+), 62 deletions(-)
>
> diff --git a/drivers/staging/iio/resolver/ad2s1210.c b/drivers/staging/iio/resolver/ad2s1210.c
> index 27a42ed10fcd..ea6ade4e563c 100644
> --- a/drivers/staging/iio/resolver/ad2s1210.c
> +++ b/drivers/staging/iio/resolver/ad2s1210.c
> @@ -60,6 +60,8 @@
>
> #define AD2S1210_DEF_EXCIT 10000
>
> +#define ERROR_MESSAGE "ad2s1210: %s out of range\n"
> +

Don't make this a define. That's horrible. It's a pointless layer of
abstraction.


> enum ad2s1210_mode {
> MOD_POS = 0,
> MOD_VEL,
> @@ -210,64 +212,6 @@ static inline int ad2s1210_soft_reset(struct ad2s1210_state *st)
> return ad2s1210_config_write(st, 0x0);
> }
>
> -static ssize_t ad2s1210_store_fclkin(struct device *dev,
> - struct device_attribute *attr,
> - const char *buf,
> - size_t len)
> -{
> - struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev));
> - unsigned int fclkin;
> - int ret;
> -
> - ret = kstrtouint(buf, 10, &fclkin);
> - if (ret)
> - return ret;
> - if (fclkin < AD2S1210_MIN_CLKIN || fclkin > AD2S1210_MAX_CLKIN) {
> - dev_err(dev, "ad2s1210: fclkin out of range\n");
> - return -EINVAL;
> - }
> -
> - mutex_lock(&st->lock);
> - st->fclkin = fclkin;
> -
> - ret = ad2s1210_update_frequency_control_word(st);
> - if (ret < 0)
> - goto error_ret;
> - ret = ad2s1210_soft_reset(st);
> -error_ret:
> - mutex_unlock(&st->lock);
> -
> - return ret < 0 ? ret : len;
> -}
> -
> -static ssize_t ad2s1210_store_fexcit(struct device *dev,
> - struct device_attribute *attr,
> - const char *buf, size_t len)
> -{
> - struct ad2s1210_state *st = iio_priv(dev_to_iio_dev(dev));
> - unsigned int fexcit;
> - int ret;
> -
> - ret = kstrtouint(buf, 10, &fexcit);
> - if (ret < 0)
> - return ret;
> - if (fexcit < AD2S1210_MIN_EXCIT || fexcit > AD2S1210_MAX_EXCIT) {
> - dev_err(dev,
> - "ad2s1210: excitation frequency out of range\n");
> - return -EINVAL;
> - }
> - mutex_lock(&st->lock);
> - st->fexcit = fexcit;
> - ret = ad2s1210_update_frequency_control_word(st);
> - if (ret < 0)
> - goto error_ret;
> - ret = ad2s1210_soft_reset(st);
> -error_ret:
> - mutex_unlock(&st->lock);
> -
> - return ret < 0 ? ret : len;
> -}
> -
> static ssize_t ad2s1210_show_control(struct device *dev,
> struct device_attribute *attr,
> char *buf)
> @@ -545,8 +489,58 @@ static int ad2s1210_read_raw(struct iio_dev *indio_dev,
> return ret;
> }
>
> -static IIO_DEVICE_ATTR(fclkin, 0644, NULL, ad2s1210_store_fclkin, 0);
> -static IIO_DEVICE_ATTR(fexcit, 0644, NULL, ad2s1210_store_fexcit, 0);
> +static int ad2s1210_write_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan, int val,
> + int val2, long mask)
> +{
> + struct ad2s1210_state *st = iio_priv(indio_dev);
> + unsigned int clk = val;
> + int ret;
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_FREQUENCY:
> + switch (chan->channel) {

This is a switch statement with only one case. Make it an if statement
and chop out some indenting.

if (mask != IIO_CHAN_INFO_FREQUENCY)
return -EINVAL;

> + case FCLKIN:
> + if (clk < AD2S1210_MIN_CLKIN ||
> + clk > AD2S1210_MAX_CLKIN) {
> + dev_err(&indio_dev->dev, ERROR_MESSAGE,

Ah... I see why you did the ERROR_MESSAGE define, to get around the 80
character limit. Don't do that. Just go over 80 characters if you need
to.


> + "fclkin");
> + ret = -EINVAL;
> + goto error_ret;

Direct returns are better. Less chance of bugs statistically.

regards,
dan carpenter