Re: [PATCHv3] iommu/intel: Ratelimit each dmar fault printing

[Dmitry Safonov]

Gentle ping?

On Mon, 2018-03-05 at 15:00 +0000, Dmitry Safonov wrote:
> Hi Joerg,
> 
> What do you think about v3?
> It looks like, I can solve my softlookups with just a bit more proper
> ratelimiting..
> 
> On Thu, 2018-02-15 at 19:17 +0000, Dmitry Safonov wrote:
> > There is a ratelimit for printing, but it's incremented each time
> > the
> > cpu recives dmar fault interrupt. While one interrupt may signal
> > about
> > *many* faults.
> > So, measuring the impact it turns out that reading/clearing one
> > fault
> > takes < 1 usec, and printing info about the fault takes ~170 msec.
> > 
> > Having in mind that maximum number of fault recording registers per
> > remapping hardware unit is 256.. IRQ handler may run for (170*256)
> > msec.
> > And as fault-serving loop runs without a time limit, during
> > servicing
> > new faults may occur..
> > 
> > Ratelimit each fault printing rather than each irq printing.
> > 
> > Fixes: commit c43fce4eebae ("iommu/vt-d: Ratelimit fault handler")
> > 
> > BUG: spinlock lockup suspected on CPU#0, CliShell/9903
> >  lock: 0xffffffff81a47440, .magic: dead4ead, .owner:
> > kworker/u16:2/8915, .owner_cpu: 6
> > CPU: 0 PID: 9903 Comm: CliShell
> > Call Trace:$\n'
> > [..] dump_stack+0x65/0x83$\n'
> > [..] spin_dump+0x8f/0x94$\n'
> > [..] do_raw_spin_lock+0x123/0x170$\n'
> > [..] _raw_spin_lock_irqsave+0x32/0x3a$\n'
> > [..] uart_chars_in_buffer+0x20/0x4d$\n'
> > [..] tty_chars_in_buffer+0x18/0x1d$\n'
> > [..] n_tty_poll+0x1cb/0x1f2$\n'
> > [..] tty_poll+0x5e/0x76$\n'
> > [..] do_select+0x363/0x629$\n'
> > [..] compat_core_sys_select+0x19e/0x239$\n'
> > [..] compat_SyS_select+0x98/0xc0$\n'
> > [..] sysenter_dispatch+0x7/0x25$\n'
> > [..]
> > NMI backtrace for cpu 6
> > CPU: 6 PID: 8915 Comm: kworker/u16:2
> > Workqueue: dmar_fault dmar_fault_work
> > Call Trace:$\n'
> > [..] wait_for_xmitr+0x26/0x8f$\n'
> > [..] serial8250_console_putchar+0x1c/0x2c$\n'
> > [..] uart_console_write+0x40/0x4b$\n'
> > [..] serial8250_console_write+0xe6/0x13f$\n'
> > [..] call_console_drivers.constprop.13+0xce/0x103$\n'
> > [..] console_unlock+0x1f8/0x39b$\n'
> > [..] vprintk_emit+0x39e/0x3e6$\n'
> > [..] printk+0x4d/0x4f$\n'
> > [..] dmar_fault+0x1a8/0x1fc$\n'
> > [..] dmar_fault_work+0x15/0x17$\n'
> > [..] process_one_work+0x1e8/0x3a9$\n'
> > [..] worker_thread+0x25d/0x345$\n'
> > [..] kthread+0xea/0xf2$\n'
> > [..] ret_from_fork+0x58/0x90$\n'
> > 
> > Cc: Alex Williamson <alex.williamson@xxxxxxxxxx>
> > Cc: David Woodhouse <dwmw2@xxxxxxxxxxxxx>
> > Cc: Ingo Molnar <mingo@xxxxxxxxxx>
> > Cc: Joerg Roedel <joro@xxxxxxxxxx>
> > Cc: Lu Baolu <baolu.lu@xxxxxxxxxxxxxxx>
> > Cc: iommu@xxxxxxxxxxxxxxxxxxxxxxxxxx
> > Signed-off-by: Dmitry Safonov <dima@xxxxxxxxxx>
> > ---
> > Maybe it's worth to limit while(1) cycle.
> > If IOMMU generates faults with equal speed as irq handler cleans
> > them, it may turn into long-irq-disabled region again.
> > Not sure if it can happen anyway.
> > 
> >  drivers/iommu/dmar.c | 8 +++-----
> >  1 file changed, 3 insertions(+), 5 deletions(-)
> > 
> > diff --git a/drivers/iommu/dmar.c b/drivers/iommu/dmar.c
> > index accf58388bdb..6c4ea32ee6a9 100644
> > --- a/drivers/iommu/dmar.c
> > +++ b/drivers/iommu/dmar.c
> > @@ -1618,17 +1618,13 @@ irqreturn_t dmar_fault(int irq, void
> > *dev_id)
> >  	int reg, fault_index;
> >  	u32 fault_status;
> >  	unsigned long flag;
> > -	bool ratelimited;
> >  	static DEFINE_RATELIMIT_STATE(rs,
> >  				      DEFAULT_RATELIMIT_INTERVAL,
> >  				      DEFAULT_RATELIMIT_BURST);
> >  
> > -	/* Disable printing, simply clear the fault when
> > ratelimited
> > */
> > -	ratelimited = !__ratelimit(&rs);
> > -
> >  	raw_spin_lock_irqsave(&iommu->register_lock, flag);
> >  	fault_status = readl(iommu->reg + DMAR_FSTS_REG);
> > -	if (fault_status && !ratelimited)
> > +	if (fault_status && __ratelimit(&rs))
> >  		pr_err("DRHD: handling fault status reg %x\n",
> > fault_status);
> >  
> >  	/* TBD: ignore advanced fault log currently */
> > @@ -1638,6 +1634,8 @@ irqreturn_t dmar_fault(int irq, void *dev_id)
> >  	fault_index = dma_fsts_fault_record_index(fault_status);
> >  	reg = cap_fault_reg_offset(iommu->cap);
> >  	while (1) {
> > +		/* Disable printing, simply clear the fault when
> > ratelimited */
> > +		bool ratelimited = !__ratelimit(&rs);
> >  		u8 fault_reason;
> >  		u16 source_id;
> >  		u64 guest_addr;