[PATCH 2/2] microblaze: switch to NO_BOOTMEM

[Michal Simek]

From: Rob Herring <robh@xxxxxxxxxx>

Microblaze doesn't set CONFIG_NO_BOOTMEM and so memblock_virt_alloc()
doesn't work for CONFIG_HAVE_MEMBLOCK && !CONFIG_NO_BOOTMEM.

Similar change was already done by others architectures
"ARM: mm: Remove bootmem code and switch to NO_BOOTMEM"
(sha1: 84f452b1e8fc73ac0e31254c66e3e2260ce5263d)
or
"openrisc: Consolidate setup to use memblock instead of bootmem"
(sha1: 266c7fad157265bb54d17db1c9545f2aaa488643)
or
"parisc: Drop bootmem and switch to memblock"
(sha1: 4fe9e1d957e45ad8eba9885ee860a0e93d13a7c7)
or
"powerpc: Remove bootmem allocator"
(sha1: 10239733ee8617bac3f1c1769af43a88ed979324)
or
"s390/mm: Convert bootmem to memblock"
(sha1: 50be634507284eea38df78154d22615d21200b42)
or
"sparc64: Convert over to NO_BOOTMEM."
(sha1: 625d693e9784f988371e69c2b41a2172c0be6c11)
or
"xtensa: drop sysmem and switch to memblock"
(sha1: 0e46c1115f5816949220d62dd3ff04aa68e7ac6b)

Issue was introduced by:
"of/fdt: use memblock_virt_alloc for early alloc"
(sha1: 0fa1c579349fdd90173381712ad78aa99c09d38b)

Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
Tested-by: Alvaro Gamez Machado <alvaro.gamez@xxxxxxxxxx>
Tested-by: Michal Simek <michal.simek@xxxxxxxxxx>
Signed-off-by: Michal Simek <michal.simek@xxxxxxxxxx>
---

 arch/microblaze/Kconfig   |  1 +
 arch/microblaze/mm/init.c | 55 ++++++-----------------------------------------
 2 files changed, 7 insertions(+), 49 deletions(-)

diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index 4f798aa671dd..3817a3e2146c 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -24,6 +24,7 @@ config MICROBLAZE
 	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_FUNCTION_TRACER
+	select NO_BOOTMEM
 	select HAVE_MEMBLOCK
 	select HAVE_MEMBLOCK_NODE_MAP
 	select HAVE_OPROFILE
diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c
index 5bc9c7fbb541..6ab1ef2daf1d 100644
--- a/arch/microblaze/mm/init.c
+++ b/arch/microblaze/mm/init.c
@@ -32,9 +32,6 @@
 #ifndef CONFIG_MMU
 unsigned int __page_offset;
 EXPORT_SYMBOL(__page_offset);
-
-#else
-static int init_bootmem_done;
 #endif /* CONFIG_MMU */
 
 char *klimit = _end;
@@ -174,17 +171,6 @@ void __init setup_memory(void)
 	pr_info("%s: max_low_pfn: %#lx\n", __func__, max_low_pfn);
 	pr_info("%s: max_pfn: %#lx\n", __func__, max_pfn);
 
-	/*
-	 * Find an area to use for the bootmem bitmap.
-	 * We look for the first area which is at least
-	 * 128kB in length (128kB is enough for a bitmap
-	 * for 4GB of memory, using 4kB pages), plus 1 page
-	 * (in case the address isn't page-aligned).
-	 */
-	map_size = init_bootmem_node(NODE_DATA(0),
-		PFN_UP(TOPHYS((u32)klimit)), min_low_pfn, max_low_pfn);
-	memblock_reserve(PFN_UP(TOPHYS((u32)klimit)) << PAGE_SHIFT, map_size);
-
 	/* Add active regions with valid PFNs */
 	for_each_memblock(memory, reg) {
 		unsigned long start_pfn, end_pfn;
@@ -196,32 +182,9 @@ void __init setup_memory(void)
 				  &memblock.memory, 0);
 	}
 
-	/* free bootmem is whole main memory */
-	free_bootmem_with_active_regions(0, max_low_pfn);
-
-	/* reserve allocate blocks */
-	for_each_memblock(reserved, reg) {
-		unsigned long top = reg->base + reg->size - 1;
-
-		pr_debug("reserved - 0x%08x-0x%08x, %lx, %lx\n",
-			 (u32) reg->base, (u32) reg->size, top,
-						memory_start + lowmem_size - 1);
-
-		if (top <= (memory_start + lowmem_size - 1)) {
-			reserve_bootmem(reg->base, reg->size, BOOTMEM_DEFAULT);
-		} else if (reg->base < (memory_start + lowmem_size - 1)) {
-			unsigned long trunc_size = memory_start + lowmem_size -
-								reg->base;
-			reserve_bootmem(reg->base, trunc_size, BOOTMEM_DEFAULT);
-		}
-	}
-
 	/* XXX need to clip this if using highmem? */
 	sparse_memory_present_with_active_regions(0);
 
-#ifdef CONFIG_MMU
-	init_bootmem_done = 1;
-#endif
 	paging_init();
 }
 
@@ -398,18 +361,12 @@ asmlinkage void __init mmu_init(void)
 /* This is only called until mem_init is done. */
 void __init *early_get_page(void)
 {
-	void *p;
-	if (init_bootmem_done) {
-		p = alloc_bootmem_pages(PAGE_SIZE);
-	} else {
-		/*
-		 * Mem start + kernel_tlb -> here is limit
-		 * because of mem mapping from head.S
-		 */
-		p = __va(memblock_alloc_base(PAGE_SIZE, PAGE_SIZE,
-					memory_start + kernel_tlb));
-	}
-	return p;
+	/*
+	 * Mem start + kernel_tlb -> here is limit
+	 * because of mem mapping from head.S
+	 */
+	return __va(memblock_alloc_base(PAGE_SIZE, PAGE_SIZE,
+				memory_start + kernel_tlb));
 }
 
 #endif /* CONFIG_MMU */
-- 
1.9.1