[PATCH] staging:fsl-mc: Move DPIO out of staging

From: Roy Pledge
Date: Wed Mar 14 2018 - 15:27:23 EST

Next message: Thomas Gleixner: "Re: [PATCH 2/2] x86/mm: remove pointless checks in vmalloc_fault"
Previous message: Joe Lawrence: "Re: [PATCH 1/2] livepatch: Initialize shadow variables by init function safely"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Move the DPIO driver out of the staging directory and into drivers/soc/fsl

Signed-off-by: Roy Pledge <roy.pledge@xxxxxxx>
---
MAINTAINERS | 2 +-
drivers/soc/fsl/Makefile | 1 +
drivers/soc/fsl/dpio/Makefile | 8 +
drivers/soc/fsl/dpio/dpio-cmd.h | 49 ++
drivers/soc/fsl/dpio/dpio-driver.c | 271 ++++++
drivers/soc/fsl/dpio/dpio-driver.txt | 135 +++
drivers/soc/fsl/dpio/dpio-service.c | 545 ++++++++++++
drivers/soc/fsl/dpio/dpio.c | 198 +++++
drivers/soc/fsl/dpio/dpio.h | 83 ++
drivers/soc/fsl/dpio/qbman-portal.c | 1005 +++++++++++++++++++++++
drivers/soc/fsl/dpio/qbman-portal.h | 444 ++++++++++
drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.h | 4 +-
drivers/staging/fsl-mc/bus/Makefile | 2 -
drivers/staging/fsl-mc/bus/dpio/Makefile | 8 -
drivers/staging/fsl-mc/bus/dpio/dpio-cmd.h | 49 --
drivers/staging/fsl-mc/bus/dpio/dpio-driver.c | 271 ------
drivers/staging/fsl-mc/bus/dpio/dpio-driver.txt | 135 ---
drivers/staging/fsl-mc/bus/dpio/dpio-service.c | 545 ------------
drivers/staging/fsl-mc/bus/dpio/dpio.c | 198 -----
drivers/staging/fsl-mc/bus/dpio/dpio.h | 83 --
drivers/staging/fsl-mc/bus/dpio/qbman-portal.c | 1005 -----------------------
drivers/staging/fsl-mc/bus/dpio/qbman-portal.h | 444 ----------
drivers/staging/fsl-mc/include/dpaa2-fd.h | 426 ----------
drivers/staging/fsl-mc/include/dpaa2-global.h | 177 ----
drivers/staging/fsl-mc/include/dpaa2-io.h | 115 ---
include/soc/fsl/dpaa2-fd.h | 426 ++++++++++
include/soc/fsl/dpaa2-global.h | 177 ++++
include/soc/fsl/dpaa2-io.h | 115 +++
28 files changed, 3460 insertions(+), 3461 deletions(-)
create mode 100644 drivers/soc/fsl/dpio/Makefile
create mode 100644 drivers/soc/fsl/dpio/dpio-cmd.h
create mode 100644 drivers/soc/fsl/dpio/dpio-driver.c
create mode 100644 drivers/soc/fsl/dpio/dpio-driver.txt
create mode 100644 drivers/soc/fsl/dpio/dpio-service.c
create mode 100644 drivers/soc/fsl/dpio/dpio.c
create mode 100644 drivers/soc/fsl/dpio/dpio.h
create mode 100644 drivers/soc/fsl/dpio/qbman-portal.c
create mode 100644 drivers/soc/fsl/dpio/qbman-portal.h
delete mode 100644 drivers/staging/fsl-mc/bus/dpio/Makefile
delete mode 100644 drivers/staging/fsl-mc/bus/dpio/dpio-cmd.h
delete mode 100644 drivers/staging/fsl-mc/bus/dpio/dpio-driver.c
delete mode 100644 drivers/staging/fsl-mc/bus/dpio/dpio-driver.txt
delete mode 100644 drivers/staging/fsl-mc/bus/dpio/dpio-service.c
delete mode 100644 drivers/staging/fsl-mc/bus/dpio/dpio.c
delete mode 100644 drivers/staging/fsl-mc/bus/dpio/dpio.h
delete mode 100644 drivers/staging/fsl-mc/bus/dpio/qbman-portal.c
delete mode 100644 drivers/staging/fsl-mc/bus/dpio/qbman-portal.h
delete mode 100644 drivers/staging/fsl-mc/include/dpaa2-fd.h
delete mode 100644 drivers/staging/fsl-mc/include/dpaa2-global.h
delete mode 100644 drivers/staging/fsl-mc/include/dpaa2-io.h
create mode 100644 include/soc/fsl/dpaa2-fd.h
create mode 100644 include/soc/fsl/dpaa2-global.h
create mode 100644 include/soc/fsl/dpaa2-io.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 3057761..3fdaade 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4436,7 +4436,7 @@ DPAA2 DATAPATH I/O (DPIO) DRIVER
M: Roy Pledge <Roy.Pledge@xxxxxxx>
L: linux-kernel@xxxxxxxxxxxxxxx
S: Maintained
-F: drivers/staging/fsl-mc/bus/dpio
+F: drivers/soc/fsl/dpio

DPAA2 ETHERNET DRIVER
M: Ioana Radulescu <ruxandra.radulescu@xxxxxxx>
diff --git a/drivers/soc/fsl/Makefile b/drivers/soc/fsl/Makefile
index 44b3beb..803ef1b 100644
--- a/drivers/soc/fsl/Makefile
+++ b/drivers/soc/fsl/Makefile
@@ -6,3 +6,4 @@ obj-$(CONFIG_FSL_DPAA) += qbman/
obj-$(CONFIG_QUICC_ENGINE) += qe/
obj-$(CONFIG_CPM) += qe/
obj-$(CONFIG_FSL_GUTS) += guts.o
+obj-$(CONFIG_FSL_MC_DPIO) += dpio/
diff --git a/drivers/soc/fsl/dpio/Makefile b/drivers/soc/fsl/dpio/Makefile
new file mode 100644
index 0000000..b9ff24c
--- /dev/null
+++ b/drivers/soc/fsl/dpio/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# QorIQ DPAA2 DPIO driver
+#
+
+obj-$(CONFIG_FSL_MC_DPIO) += fsl-mc-dpio.o
+
+fsl-mc-dpio-objs := dpio.o qbman-portal.o dpio-service.o dpio-driver.o
diff --git a/drivers/soc/fsl/dpio/dpio-cmd.h b/drivers/soc/fsl/dpio/dpio-cmd.h
new file mode 100644
index 0000000..ab8f82e
--- /dev/null
+++ b/drivers/soc/fsl/dpio/dpio-cmd.h
@@ -0,0 +1,49 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright 2013-2016 Freescale Semiconductor Inc.
+ * Copyright 2016 NXP
+ *
+ */
+#ifndef _FSL_DPIO_CMD_H
+#define _FSL_DPIO_CMD_H
+
+/* DPIO Version */
+#define DPIO_VER_MAJOR 4
+#define DPIO_VER_MINOR 2
+
+/* Command Versioning */
+
+#define DPIO_CMD_ID_OFFSET 4
+#define DPIO_CMD_BASE_VERSION 1
+
+#define DPIO_CMD(id) (((id) << DPIO_CMD_ID_OFFSET) | DPIO_CMD_BASE_VERSION)
+
+/* Command IDs */
+#define DPIO_CMDID_CLOSE DPIO_CMD(0x800)
+#define DPIO_CMDID_OPEN DPIO_CMD(0x803)
+#define DPIO_CMDID_GET_API_VERSION DPIO_CMD(0xa03)
+#define DPIO_CMDID_ENABLE DPIO_CMD(0x002)
+#define DPIO_CMDID_DISABLE DPIO_CMD(0x003)
+#define DPIO_CMDID_GET_ATTR DPIO_CMD(0x004)
+
+struct dpio_cmd_open {
+ __le32 dpio_id;
+};
+
+#define DPIO_CHANNEL_MODE_MASK 0x3
+
+struct dpio_rsp_get_attr {
+ /* cmd word 0 */
+ __le32 id;
+ __le16 qbman_portal_id;
+ u8 num_priorities;
+ u8 channel_mode;
+ /* cmd word 1 */
+ __le64 qbman_portal_ce_addr;
+ /* cmd word 2 */
+ __le64 qbman_portal_ci_addr;
+ /* cmd word 3 */
+ __le32 qbman_version;
+};
+
+#endif /* _FSL_DPIO_CMD_H */
diff --git a/drivers/soc/fsl/dpio/dpio-driver.c b/drivers/soc/fsl/dpio/dpio-driver.c
new file mode 100644
index 0000000..732f025
--- /dev/null
+++ b/drivers/soc/fsl/dpio/dpio-driver.c
@@ -0,0 +1,271 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright 2014-2016 Freescale Semiconductor Inc.
+ * Copyright NXP 2016
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/msi.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+
+#include <linux/fsl/mc.h>
+#include <soc/fsl/dpaa2-io.h>
+
+#include "qbman-portal.h"
+#include "dpio.h"
+#include "dpio-cmd.h"
+
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_AUTHOR("Freescale Semiconductor, Inc");
+MODULE_DESCRIPTION("DPIO Driver");
+
+struct dpio_priv {
+ struct dpaa2_io *io;
+};
+
+static irqreturn_t dpio_irq_handler(int irq_num, void *arg)
+{
+ struct device *dev = (struct device *)arg;
+ struct dpio_priv *priv = dev_get_drvdata(dev);
+
+ return dpaa2_io_irq(priv->io);
+}
+
+static void unregister_dpio_irq_handlers(struct fsl_mc_device *dpio_dev)
+{
+ struct fsl_mc_device_irq *irq;
+
+ irq = dpio_dev->irqs[0];
+
+ /* clear the affinity hint */
+ irq_set_affinity_hint(irq->msi_desc->irq, NULL);
+}
+
+static int register_dpio_irq_handlers(struct fsl_mc_device *dpio_dev, int cpu)
+{
+ struct dpio_priv *priv;
+ int error;
+ struct fsl_mc_device_irq *irq;
+ cpumask_t mask;
+
+ priv = dev_get_drvdata(&dpio_dev->dev);
+
+ irq = dpio_dev->irqs[0];
+ error = devm_request_irq(&dpio_dev->dev,
+ irq->msi_desc->irq,
+ dpio_irq_handler,
+ 0,
+ dev_name(&dpio_dev->dev),
+ &dpio_dev->dev);
+ if (error < 0) {
+ dev_err(&dpio_dev->dev,
+ "devm_request_irq() failed: %d\n",
+ error);
+ return error;
+ }
+
+ /* set the affinity hint */
+ cpumask_clear(&mask);
+ cpumask_set_cpu(cpu, &mask);
+ if (irq_set_affinity_hint(irq->msi_desc->irq, &mask))
+ dev_err(&dpio_dev->dev,
+ "irq_set_affinity failed irq %d cpu %d\n",
+ irq->msi_desc->irq, cpu);
+
+ return 0;
+}
+
+static int dpaa2_dpio_probe(struct fsl_mc_device *dpio_dev)
+{
+ struct dpio_attr dpio_attrs;
+ struct dpaa2_io_desc desc;
+ struct dpio_priv *priv;
+ int err = -ENOMEM;
+ struct device *dev = &dpio_dev->dev;
+ static int next_cpu = -1;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ goto err_priv_alloc;
+
+ dev_set_drvdata(dev, priv);
+
+ err = fsl_mc_portal_allocate(dpio_dev, 0, &dpio_dev->mc_io);
+ if (err) {
+ dev_dbg(dev, "MC portal allocation failed\n");
+ err = -EPROBE_DEFER;
+ goto err_mcportal;
+ }
+
+ err = dpio_open(dpio_dev->mc_io, 0, dpio_dev->obj_desc.id,
+ &dpio_dev->mc_handle);
+ if (err) {
+ dev_err(dev, "dpio_open() failed\n");
+ goto err_open;
+ }
+
+ err = dpio_get_attributes(dpio_dev->mc_io, 0, dpio_dev->mc_handle,
+ &dpio_attrs);
+ if (err) {
+ dev_err(dev, "dpio_get_attributes() failed %d\n", err);
+ goto err_get_attr;
+ }
+ desc.qman_version = dpio_attrs.qbman_version;
+
+ err = dpio_enable(dpio_dev->mc_io, 0, dpio_dev->mc_handle);
+ if (err) {
+ dev_err(dev, "dpio_enable() failed %d\n", err);
+ goto err_get_attr;
+ }
+
+ /* initialize DPIO descriptor */
+ desc.receives_notifications = dpio_attrs.num_priorities ? 1 : 0;
+ desc.has_8prio = dpio_attrs.num_priorities == 8 ? 1 : 0;
+ desc.dpio_id = dpio_dev->obj_desc.id;
+
+ /* get the cpu to use for the affinity hint */
+ if (next_cpu == -1)
+ next_cpu = cpumask_first(cpu_online_mask);
+ else
+ next_cpu = cpumask_next(next_cpu, cpu_online_mask);
+
+ if (!cpu_possible(next_cpu)) {
+ dev_err(dev, "probe failed. Number of DPIOs exceeds NR_CPUS.\n");
+ err = -ERANGE;
+ goto err_allocate_irqs;
+ }
+ desc.cpu = next_cpu;
+
+ /*
+ * Set the CENA regs to be the cache inhibited area of the portal to
+ * avoid coherency issues if a user migrates to another core.
+ */
+ desc.regs_cena = ioremap_wc(dpio_dev->regions[1].start,
+ resource_size(&dpio_dev->regions[1]));
+ desc.regs_cinh = ioremap(dpio_dev->regions[1].start,
+ resource_size(&dpio_dev->regions[1]));
+
+ err = fsl_mc_allocate_irqs(dpio_dev);
+ if (err) {
+ dev_err(dev, "fsl_mc_allocate_irqs failed. err=%d\n", err);
+ goto err_allocate_irqs;
+ }
+
+ err = register_dpio_irq_handlers(dpio_dev, desc.cpu);
+ if (err)
+ goto err_register_dpio_irq;
+
+ priv->io = dpaa2_io_create(&desc);
+ if (!priv->io) {
+ dev_err(dev, "dpaa2_io_create failed\n");
+ goto err_dpaa2_io_create;
+ }
+
+ dev_info(dev, "probed\n");
+ dev_dbg(dev, " receives_notifications = %d\n",
+ desc.receives_notifications);
+ dpio_close(dpio_dev->mc_io, 0, dpio_dev->mc_handle);
+ fsl_mc_portal_free(dpio_dev->mc_io);
+
+ return 0;
+
+err_dpaa2_io_create:
+ unregister_dpio_irq_handlers(dpio_dev);
+err_register_dpio_irq:
+ fsl_mc_free_irqs(dpio_dev);
+err_allocate_irqs:
+ dpio_disable(dpio_dev->mc_io, 0, dpio_dev->mc_handle);
+err_get_attr:
+ dpio_close(dpio_dev->mc_io, 0, dpio_dev->mc_handle);
+err_open:
+ fsl_mc_portal_free(dpio_dev->mc_io);
+err_mcportal:
+ dev_set_drvdata(dev, NULL);
+err_priv_alloc:
+ return err;
+}
+
+/* Tear down interrupts for a given DPIO object */
+static void dpio_teardown_irqs(struct fsl_mc_device *dpio_dev)
+{
+ unregister_dpio_irq_handlers(dpio_dev);
+ fsl_mc_free_irqs(dpio_dev);
+}
+
+static int dpaa2_dpio_remove(struct fsl_mc_device *dpio_dev)
+{
+ struct device *dev;
+ struct dpio_priv *priv;
+ int err;
+
+ dev = &dpio_dev->dev;
+ priv = dev_get_drvdata(dev);
+
+ dpaa2_io_down(priv->io);
+
+ dpio_teardown_irqs(dpio_dev);
+
+ err = fsl_mc_portal_allocate(dpio_dev, 0, &dpio_dev->mc_io);
+ if (err) {
+ dev_err(dev, "MC portal allocation failed\n");
+ goto err_mcportal;
+ }
+
+ err = dpio_open(dpio_dev->mc_io, 0, dpio_dev->obj_desc.id,
+ &dpio_dev->mc_handle);
+ if (err) {
+ dev_err(dev, "dpio_open() failed\n");
+ goto err_open;
+ }
+
+ dpio_disable(dpio_dev->mc_io, 0, dpio_dev->mc_handle);
+
+ dpio_close(dpio_dev->mc_io, 0, dpio_dev->mc_handle);
+
+ fsl_mc_portal_free(dpio_dev->mc_io);
+
+ dev_set_drvdata(dev, NULL);
+
+ return 0;
+
+err_open:
+ fsl_mc_portal_free(dpio_dev->mc_io);
+err_mcportal:
+ return err;
+}
+
+static const struct fsl_mc_device_id dpaa2_dpio_match_id_table[] = {
+ {
+ .vendor = FSL_MC_VENDOR_FREESCALE,
+ .obj_type = "dpio",
+ },
+ { .vendor = 0x0 }
+};
+
+static struct fsl_mc_driver dpaa2_dpio_driver = {
+ .driver = {
+ .name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = dpaa2_dpio_probe,
+ .remove = dpaa2_dpio_remove,
+ .match_id_table = dpaa2_dpio_match_id_table
+};
+
+static int dpio_driver_init(void)
+{
+ return fsl_mc_driver_register(&dpaa2_dpio_driver);
+}
+
+static void dpio_driver_exit(void)
+{
+ fsl_mc_driver_unregister(&dpaa2_dpio_driver);
+}
+module_init(dpio_driver_init);
+module_exit(dpio_driver_exit);
diff --git a/drivers/soc/fsl/dpio/dpio-driver.txt b/drivers/soc/fsl/dpio/dpio-driver.txt
new file mode 100644
index 0000000..0ba6771
--- /dev/null
+++ b/drivers/soc/fsl/dpio/dpio-driver.txt
@@ -0,0 +1,135 @@
+Copyright 2016 NXP
+
+Introduction
+------------
+
+A DPAA2 DPIO (Data Path I/O) is a hardware object that provides
+interfaces to enqueue and dequeue frames to/from network interfaces
+and other accelerators. A DPIO also provides hardware buffer
+pool management for network interfaces.
+
+This document provides an overview the Linux DPIO driver, its
+subcomponents, and its APIs.
+
+See Documentation/dpaa2/overview.txt for a general overview of DPAA2
+and the general DPAA2 driver architecture in Linux.
+
+Driver Overview
+---------------
+
+The DPIO driver is bound to DPIO objects discovered on the fsl-mc bus and
+provides services that:
+ A) allow other drivers, such as the Ethernet driver, to enqueue and dequeue
+ frames for their respective objects
+ B) allow drivers to register callbacks for data availability notifications
+ when data becomes available on a queue or channel
+ C) allow drivers to manage hardware buffer pools
+
+The Linux DPIO driver consists of 3 primary components--
+ DPIO object driver-- fsl-mc driver that manages the DPIO object
+ DPIO service-- provides APIs to other Linux drivers for services
+ QBman portal interface-- sends portal commands, gets responses
+
+ fsl-mc other
+ bus drivers
+ | |
+ +---+----+ +------+-----+
+ |DPIO obj| |DPIO service|
+ | driver |---| (DPIO) |
+ +--------+ +------+-----+
+ |
+ +------+-----+
+ | QBman |
+ | portal i/f |
+ +------------+
+ |
+ hardware
+
+The diagram below shows how the DPIO driver components fit with the other
+DPAA2 Linux driver components:
+ +------------+
+ | OS Network |
+ | Stack |
+ +------------+ +------------+
+ | Allocator |. . . . . . . | Ethernet |
+ |(DPMCP,DPBP)| | (DPNI) |
+ +-.----------+ +---+---+----+
+ . . ^ |
+ . . <data avail, | |<enqueue,
+ . . tx confirm> | | dequeue>
+ +-------------+ . | |
+ | DPRC driver | . +--------+ +------------+
+ | (DPRC) | . . |DPIO obj| |DPIO service|
+ +----------+--+ | driver |-| (DPIO) |
+ | +--------+ +------+-----+
+ |<dev add/remove> +------|-----+
+ | | QBman |
+ +----+--------------+ | portal i/f |
+ | MC-bus driver | +------------+
+ | | |
+ | /soc/fsl-mc | |
+ +-------------------+ |
+ |
+ =========================================|=========|========================
+ +-+--DPIO---|-----------+
+ | | |
+ | QBman Portal |
+ +-----------------------+
+
+ ============================================================================
+
+
+DPIO Object Driver (dpio-driver.c)
+----------------------------------
+
+ The dpio-driver component registers with the fsl-mc bus to handle objects of
+ type "dpio". The implementation of probe() handles basic initialization
+ of the DPIO including mapping of the DPIO regions (the QBman SW portal)
+ and initializing interrupts and registering irq handlers. The dpio-driver
+ registers the probed DPIO with dpio-service.
+
+DPIO service (dpio-service.c, dpaa2-io.h)
+------------------------------------------
+
+ The dpio service component provides queuing, notification, and buffers
+ management services to DPAA2 drivers, such as the Ethernet driver. A system
+ will typically allocate 1 DPIO object per CPU to allow queuing operations
+ to happen simultaneously across all CPUs.
+
+ Notification handling
+ dpaa2_io_service_register()
+ dpaa2_io_service_deregister()
+ dpaa2_io_service_rearm()
+
+ Queuing
+ dpaa2_io_service_pull_fq()
+ dpaa2_io_service_pull_channel()
+ dpaa2_io_service_enqueue_fq()
+ dpaa2_io_service_enqueue_qd()
+ dpaa2_io_store_create()
+ dpaa2_io_store_destroy()
+ dpaa2_io_store_next()
+
+ Buffer pool management
+ dpaa2_io_service_release()
+ dpaa2_io_service_acquire()
+
+QBman portal interface (qbman-portal.c)
+---------------------------------------
+
+ The qbman-portal component provides APIs to do the low level hardware
+ bit twiddling for operations such as:
+ -initializing Qman software portals
+ -building and sending portal commands
+ -portal interrupt configuration and processing
+
+ The qbman-portal APIs are not public to other drivers, and are
+ only used by dpio-service.
+
+Other (dpaa2-fd.h, dpaa2-global.h)
+----------------------------------
+
+ Frame descriptor and scatter-gather definitions and the APIs used to
+ manipulate them are defined in dpaa2-fd.h.
+
+ Dequeue result struct and parsing APIs are defined in dpaa2-global.h.
diff --git a/drivers/soc/fsl/dpio/dpio-service.c b/drivers/soc/fsl/dpio/dpio-service.c
new file mode 100644
index 0000000..9b17f72
--- /dev/null
+++ b/drivers/soc/fsl/dpio/dpio-service.c
@@ -0,0 +1,545 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright 2014-2016 Freescale Semiconductor Inc.
+ * Copyright 2016 NXP
+ *
+ */
+#include <linux/types.h>
+#include <linux/fsl/mc.h>
+#include <soc/fsl/dpaa2-io.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+
+#include "dpio.h"
+#include "qbman-portal.h"
+
+struct dpaa2_io {
+ struct dpaa2_io_desc dpio_desc;
+ struct qbman_swp_desc swp_desc;
+ struct qbman_swp *swp;
+ struct list_head node;
+ /* protect against multiple management commands */
+ spinlock_t lock_mgmt_cmd;
+ /* protect notifications list */
+ spinlock_t lock_notifications;
+ struct list_head notifications;
+};
+
+struct dpaa2_io_store {
+ unsigned int max;
+ dma_addr_t paddr;
+ struct dpaa2_dq *vaddr;
+ void *alloced_addr; /* unaligned value from kmalloc() */
+ unsigned int idx; /* position of the next-to-be-returned entry */
+ struct qbman_swp *swp; /* portal used to issue VDQCR */
+ struct device *dev; /* device used for DMA mapping */
+};
+
+/* keep a per cpu array of DPIOs for fast access */
+static struct dpaa2_io *dpio_by_cpu[NR_CPUS];
+static struct list_head dpio_list = LIST_HEAD_INIT(dpio_list);
+static DEFINE_SPINLOCK(dpio_list_lock);
+
+static inline struct dpaa2_io *service_select_by_cpu(struct dpaa2_io *d,
+ int cpu)
+{
+ if (d)
+ return d;
+
+ if (cpu != DPAA2_IO_ANY_CPU && cpu >= num_possible_cpus())
+ return NULL;
+
+ /*
+ * If cpu == -1, choose the current cpu, with no guarantees about
+ * potentially being migrated away.
+ */
+ if (unlikely(cpu < 0))
+ cpu = smp_processor_id();
+
+ /* If a specific cpu was requested, pick it up immediately */
+ return dpio_by_cpu[cpu];
+}
+
+static inline struct dpaa2_io *service_select(struct dpaa2_io *d)
+{
+ if (d)
+ return d;
+
+ spin_lock(&dpio_list_lock);
+ d = list_entry(dpio_list.next, struct dpaa2_io, node);
+ list_del(&d->node);
+ list_add_tail(&d->node, &dpio_list);
+ spin_unlock(&dpio_list_lock);
+
+ return d;
+}
+
+/**
+ * dpaa2_io_service_select() - return a dpaa2_io service affined to this cpu
+ * @cpu: the cpu id
+ *
+ * Return the affine dpaa2_io service, or NULL if there is no service affined
+ * to the specified cpu. If DPAA2_IO_ANY_CPU is used, return the next available
+ * service.
+ */
+struct dpaa2_io *dpaa2_io_service_select(int cpu)
+{
+ if (cpu == DPAA2_IO_ANY_CPU)
+ return service_select(NULL);
+
+ return service_select_by_cpu(NULL, cpu);
+}
+EXPORT_SYMBOL_GPL(dpaa2_io_service_select);
+
+/**
+ * dpaa2_io_create() - create a dpaa2_io object.
+ * @desc: the dpaa2_io descriptor
+ *
+ * Activates a "struct dpaa2_io" corresponding to the given config of an actual
+ * DPIO object.
+ *
+ * Return a valid dpaa2_io object for success, or NULL for failure.
+ */
+struct dpaa2_io *dpaa2_io_create(const struct dpaa2_io_desc *desc)
+{
+ struct dpaa2_io *obj = kmalloc(sizeof(*obj), GFP_KERNEL);
+
+ if (!obj)
+ return NULL;
+
+ /* check if CPU is out of range (-1 means any cpu) */
+ if (desc->cpu != DPAA2_IO_ANY_CPU && desc->cpu >= num_possible_cpus()) {
+ kfree(obj);
+ return NULL;
+ }
+
+ obj->dpio_desc = *desc;
+ obj->swp_desc.cena_bar = obj->dpio_desc.regs_cena;
+ obj->swp_desc.cinh_bar = obj->dpio_desc.regs_cinh;
+ obj->swp_desc.qman_version = obj->dpio_desc.qman_version;
+ obj->swp = qbman_swp_init(&obj->swp_desc);
+
+ if (!obj->swp) {
+ kfree(obj);
+ return NULL;
+ }
+
+ INIT_LIST_HEAD(&obj->node);
+ spin_lock_init(&obj->lock_mgmt_cmd);
+ spin_lock_init(&obj->lock_notifications);
+ INIT_LIST_HEAD(&obj->notifications);
+
+ /* For now only enable DQRR interrupts */
+ qbman_swp_interrupt_set_trigger(obj->swp,
+ QBMAN_SWP_INTERRUPT_DQRI);
+ qbman_swp_interrupt_clear_status(obj->swp, 0xffffffff);
+ if (obj->dpio_desc.receives_notifications)
+ qbman_swp_push_set(obj->swp, 0, 1);
+
+ spin_lock(&dpio_list_lock);
+ list_add_tail(&obj->node, &dpio_list);
+ if (desc->cpu >= 0 && !dpio_by_cpu[desc->cpu])
+ dpio_by_cpu[desc->cpu] = obj;
+ spin_unlock(&dpio_list_lock);
+
+ return obj;
+}
+
+/**
+ * dpaa2_io_down() - release the dpaa2_io object.
+ * @d: the dpaa2_io object to be released.
+ *
+ * The "struct dpaa2_io" type can represent an individual DPIO object (as
+ * described by "struct dpaa2_io_desc") or an instance of a "DPIO service",
+ * which can be used to group/encapsulate multiple DPIO objects. In all cases,
+ * each handle obtained should be released using this function.
+ */
+void dpaa2_io_down(struct dpaa2_io *d)
+{
+ kfree(d);
+}
+
+#define DPAA_POLL_MAX 32
+
+/**
+ * dpaa2_io_irq() - ISR for DPIO interrupts
+ *
+ * @obj: the given DPIO object.
+ *
+ * Return IRQ_HANDLED for success or IRQ_NONE if there
+ * were no pending interrupts.
+ */
+irqreturn_t dpaa2_io_irq(struct dpaa2_io *obj)
+{
+ const struct dpaa2_dq *dq;
+ int max = 0;
+ struct qbman_swp *swp;
+ u32 status;
+
+ swp = obj->swp;
+ status = qbman_swp_interrupt_read_status(swp);
+ if (!status)
+ return IRQ_NONE;
+
+ dq = qbman_swp_dqrr_next(swp);
+ while (dq) {
+ if (qbman_result_is_SCN(dq)) {
+ struct dpaa2_io_notification_ctx *ctx;
+ u64 q64;
+
+ q64 = qbman_result_SCN_ctx(dq);
+ ctx = (void *)(uintptr_t)q64;
+ ctx->cb(ctx);
+ } else {
+ pr_crit("fsl-mc-dpio: Unrecognised/ignored DQRR entry\n");
+ }
+ qbman_swp_dqrr_consume(swp, dq);
+ ++max;
+ if (max > DPAA_POLL_MAX)
+ goto done;
+ dq = qbman_swp_dqrr_next(swp);
+ }
+done:
+ qbman_swp_interrupt_clear_status(swp, status);
+ qbman_swp_interrupt_set_inhibit(swp, 0);
+ return IRQ_HANDLED;
+}
+
+/**
+ * dpaa2_io_service_register() - Prepare for servicing of FQDAN or CDAN
+ * notifications on the given DPIO service.
+ * @d: the given DPIO service.
+ * @ctx: the notification context.
+ *
+ * The caller should make the MC command to attach a DPAA2 object to
+ * a DPIO after this function completes successfully. In that way:
+ * (a) The DPIO service is "ready" to handle a notification arrival
+ * (which might happen before the "attach" command to MC has
+ * returned control of execution back to the caller)
+ * (b) The DPIO service can provide back to the caller the 'dpio_id' and
+ * 'qman64' parameters that it should pass along in the MC command
+ * in order for the object to be configured to produce the right
+ * notification fields to the DPIO service.
+ *
+ * Return 0 for success, or -ENODEV for failure.
+ */
+int dpaa2_io_service_register(struct dpaa2_io *d,
+ struct dpaa2_io_notification_ctx *ctx)
+{
+ unsigned long irqflags;
+
+ d = service_select_by_cpu(d, ctx->desired_cpu);
+ if (!d)
+ return -ENODEV;
+
+ ctx->dpio_id = d->dpio_desc.dpio_id;
+ ctx->qman64 = (u64)(uintptr_t)ctx;
+ ctx->dpio_private = d;
+ spin_lock_irqsave(&d->lock_notifications, irqflags);
+ list_add(&ctx->node, &d->notifications);
+ spin_unlock_irqrestore(&d->lock_notifications, irqflags);
+
+ /* Enable the generation of CDAN notifications */
+ if (ctx->is_cdan)
+ return qbman_swp_CDAN_set_context_enable(d->swp,
+ (u16)ctx->id,
+ ctx->qman64);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(dpaa2_io_service_register);
+
+/**
+ * dpaa2_io_service_deregister - The opposite of 'register'.
+ * @service: the given DPIO service.
+ * @ctx: the notification context.
+ *
+ * This function should be called only after sending the MC command to
+ * to detach the notification-producing device from the DPIO.
+ */
+void dpaa2_io_service_deregister(struct dpaa2_io *service,
+ struct dpaa2_io_notification_ctx *ctx)
+{
+ struct dpaa2_io *d = ctx->dpio_private;
+ unsigned long irqflags;
+
+ if (ctx->is_cdan)
+ qbman_swp_CDAN_disable(d->swp, (u16)ctx->id);
+
+ spin_lock_irqsave(&d->lock_notifications, irqflags);
+ list_del(&ctx->node);
+ spin_unlock_irqrestore(&d->lock_notifications, irqflags);
+}
+EXPORT_SYMBOL_GPL(dpaa2_io_service_deregister);
+
+/**
+ * dpaa2_io_service_rearm() - Rearm the notification for the given DPIO service.
+ * @d: the given DPIO service.
+ * @ctx: the notification context.
+ *
+ * Once a FQDAN/CDAN has been produced, the corresponding FQ/channel is
+ * considered "disarmed". Ie. the user can issue pull dequeue operations on that
+ * traffic source for as long as it likes. Eventually it may wish to "rearm"
+ * that source to allow it to produce another FQDAN/CDAN, that's what this
+ * function achieves.
+ *
+ * Return 0 for success.
+ */
+int dpaa2_io_service_rearm(struct dpaa2_io *d,
+ struct dpaa2_io_notification_ctx *ctx)
+{
+ unsigned long irqflags;
+ int err;
+
+ d = service_select_by_cpu(d, ctx->desired_cpu);
+ if (!unlikely(d))
+ return -ENODEV;
+
+ spin_lock_irqsave(&d->lock_mgmt_cmd, irqflags);
+ if (ctx->is_cdan)
+ err = qbman_swp_CDAN_enable(d->swp, (u16)ctx->id);
+ else
+ err = qbman_swp_fq_schedule(d->swp, ctx->id);
+ spin_unlock_irqrestore(&d->lock_mgmt_cmd, irqflags);
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(dpaa2_io_service_rearm);
+
+/**
+ * dpaa2_io_service_pull_channel() - pull dequeue functions from a channel.
+ * @d: the given DPIO service.
+ * @channelid: the given channel id.
+ * @s: the dpaa2_io_store object for the result.
+ *
+ * Return 0 for success, or error code for failure.
+ */
+int dpaa2_io_service_pull_channel(struct dpaa2_io *d, u32 channelid,
+ struct dpaa2_io_store *s)
+{
+ struct qbman_pull_desc pd;
+ int err;
+
+ qbman_pull_desc_clear(&pd);
+ qbman_pull_desc_set_storage(&pd, s->vaddr, s->paddr, 1);
+ qbman_pull_desc_set_numframes(&pd, (u8)s->max);
+ qbman_pull_desc_set_channel(&pd, channelid, qbman_pull_type_prio);
+
+ d = service_select(d);
+ if (!d)
+ return -ENODEV;
+
+ s->swp = d->swp;
+ err = qbman_swp_pull(d->swp, &pd);
+ if (err)
+ s->swp = NULL;
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(dpaa2_io_service_pull_channel);
+
+/**
+ * dpaa2_io_service_enqueue_qd() - Enqueue a frame to a QD.
+ * @d: the given DPIO service.
+ * @qdid: the given queuing destination id.
+ * @prio: the given queuing priority.
+ * @qdbin: the given queuing destination bin.
+ * @fd: the frame descriptor which is enqueued.
+ *
+ * Return 0 for successful enqueue, or -EBUSY if the enqueue ring is not ready,
+ * or -ENODEV if there is no dpio service.
+ */
+int dpaa2_io_service_enqueue_qd(struct dpaa2_io *d,
+ u32 qdid, u8 prio, u16 qdbin,
+ const struct dpaa2_fd *fd)
+{
+ struct qbman_eq_desc ed;
+
+ d = service_select(d);
+ if (!d)
+ return -ENODEV;
+
+ qbman_eq_desc_clear(&ed);
+ qbman_eq_desc_set_no_orp(&ed, 0);
+ qbman_eq_desc_set_qd(&ed, qdid, qdbin, prio);
+
+ return qbman_swp_enqueue(d->swp, &ed, fd);
+}
+EXPORT_SYMBOL_GPL(dpaa2_io_service_enqueue_qd);
+
+/**
+ * dpaa2_io_service_release() - Release buffers to a buffer pool.
+ * @d: the given DPIO object.
+ * @bpid: the buffer pool id.
+ * @buffers: the buffers to be released.
+ * @num_buffers: the number of the buffers to be released.
+ *
+ * Return 0 for success, and negative error code for failure.
+ */
+int dpaa2_io_service_release(struct dpaa2_io *d,
+ u32 bpid,
+ const u64 *buffers,
+ unsigned int num_buffers)
+{
+ struct qbman_release_desc rd;
+
+ d = service_select(d);
+ if (!d)
+ return -ENODEV;
+
+ qbman_release_desc_clear(&rd);
+ qbman_release_desc_set_bpid(&rd, bpid);
+
+ return qbman_swp_release(d->swp, &rd, buffers, num_buffers);
+}
+EXPORT_SYMBOL_GPL(dpaa2_io_service_release);
+
+/**
+ * dpaa2_io_service_acquire() - Acquire buffers from a buffer pool.
+ * @d: the given DPIO object.
+ * @bpid: the buffer pool id.
+ * @buffers: the buffer addresses for acquired buffers.
+ * @num_buffers: the expected number of the buffers to acquire.
+ *
+ * Return a negative error code if the command failed, otherwise it returns
+ * the number of buffers acquired, which may be less than the number requested.
+ * Eg. if the buffer pool is empty, this will return zero.
+ */
+int dpaa2_io_service_acquire(struct dpaa2_io *d,
+ u32 bpid,
+ u64 *buffers,
+ unsigned int num_buffers)
+{
+ unsigned long irqflags;
+ int err;
+
+ d = service_select(d);
+ if (!d)
+ return -ENODEV;
+
+ spin_lock_irqsave(&d->lock_mgmt_cmd, irqflags);
+ err = qbman_swp_acquire(d->swp, bpid, buffers, num_buffers);
+ spin_unlock_irqrestore(&d->lock_mgmt_cmd, irqflags);
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(dpaa2_io_service_acquire);
+
+/*
+ * 'Stores' are reusable memory blocks for holding dequeue results, and to
+ * assist with parsing those results.
+ */
+
+/**
+ * dpaa2_io_store_create() - Create the dma memory storage for dequeue result.
+ * @max_frames: the maximum number of dequeued result for frames, must be <= 16.
+ * @dev: the device to allow mapping/unmapping the DMAable region.
+ *
+ * The size of the storage is "max_frames*sizeof(struct dpaa2_dq)".
+ * The 'dpaa2_io_store' returned is a DPIO service managed object.
+ *
+ * Return pointer to dpaa2_io_store struct for successfully created storage
+ * memory, or NULL on error.
+ */
+struct dpaa2_io_store *dpaa2_io_store_create(unsigned int max_frames,
+ struct device *dev)
+{
+ struct dpaa2_io_store *ret;
+ size_t size;
+
+ if (!max_frames || (max_frames > 16))
+ return NULL;
+
+ ret = kmalloc(sizeof(*ret), GFP_KERNEL);
+ if (!ret)
+ return NULL;
+
+ ret->max = max_frames;
+ size = max_frames * sizeof(struct dpaa2_dq) + 64;
+ ret->alloced_addr = kzalloc(size, GFP_KERNEL);
+ if (!ret->alloced_addr) {
+ kfree(ret);
+ return NULL;
+ }
+
+ ret->vaddr = PTR_ALIGN(ret->alloced_addr, 64);
+ ret->paddr = dma_map_single(dev, ret->vaddr,
+ sizeof(struct dpaa2_dq) * max_frames,
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(dev, ret->paddr)) {
+ kfree(ret->alloced_addr);
+ kfree(ret);
+ return NULL;
+ }
+
+ ret->idx = 0;
+ ret->dev = dev;
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(dpaa2_io_store_create);
+
+/**
+ * dpaa2_io_store_destroy() - Frees the dma memory storage for dequeue
+ * result.
+ * @s: the storage memory to be destroyed.
+ */
+void dpaa2_io_store_destroy(struct dpaa2_io_store *s)
+{
+ dma_unmap_single(s->dev, s->paddr, sizeof(struct dpaa2_dq) * s->max,
+ DMA_FROM_DEVICE);
+ kfree(s->alloced_addr);
+ kfree(s);
+}
+EXPORT_SYMBOL_GPL(dpaa2_io_store_destroy);
+
+/**
+ * dpaa2_io_store_next() - Determine when the next dequeue result is available.
+ * @s: the dpaa2_io_store object.
+ * @is_last: indicate whether this is the last frame in the pull command.
+ *
+ * When an object driver performs dequeues to a dpaa2_io_store, this function
+ * can be used to determine when the next frame result is available. Once
+ * this function returns non-NULL, a subsequent call to it will try to find
+ * the next dequeue result.
+ *
+ * Note that if a pull-dequeue has a NULL result because the target FQ/channel
+ * was empty, then this function will also return NULL (rather than expecting
+ * the caller to always check for this. As such, "is_last" can be used to
+ * differentiate between "end-of-empty-dequeue" and "still-waiting".
+ *
+ * Return dequeue result for a valid dequeue result, or NULL for empty dequeue.
+ */
+struct dpaa2_dq *dpaa2_io_store_next(struct dpaa2_io_store *s, int *is_last)
+{
+ int match;
+ struct dpaa2_dq *ret = &s->vaddr[s->idx];
+
+ match = qbman_result_has_new_result(s->swp, ret);
+ if (!match) {
+ *is_last = 0;
+ return NULL;
+ }
+
+ s->idx++;
+
+ if (dpaa2_dq_is_pull_complete(ret)) {
+ *is_last = 1;
+ s->idx = 0;
+ /*
+ * If we get an empty dequeue result to terminate a zero-results
+ * vdqcr, return NULL to the caller rather than expecting him to
+ * check non-NULL results every time.
+ */
+ if (!(dpaa2_dq_flags(ret) & DPAA2_DQ_STAT_VALIDFRAME))
+ ret = NULL;
+ } else {
+ *is_last = 0;
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(dpaa2_io_store_next);
diff --git a/drivers/soc/fsl/dpio/dpio.c b/drivers/soc/fsl/dpio/dpio.c
new file mode 100644
index 0000000..3175057
--- /dev/null
+++ b/drivers/soc/fsl/dpio/dpio.c
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright 2013-2016 Freescale Semiconductor Inc.
+ * Copyright 2016 NXP
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/fsl/mc.h>
+
+#include "dpio.h"
+#include "dpio-cmd.h"
+
+/*
+ * Data Path I/O Portal API
+ * Contains initialization APIs and runtime control APIs for DPIO
+ */
+
+/**
+ * dpio_open() - Open a control session for the specified object
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @dpio_id: DPIO unique ID
+ * @token: Returned token; use in subsequent API calls
+ *
+ * This function can be used to open a control session for an
+ * already created object; an object may have been declared in
+ * the DPL or by calling the dpio_create() function.
+ * This function returns a unique authentication token,
+ * associated with the specific object ID and the specific MC
+ * portal; this token must be used in all subsequent commands for
+ * this specific object.
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpio_open(struct fsl_mc_io *mc_io,
+ u32 cmd_flags,
+ int dpio_id,
+ u16 *token)
+{
+ struct mc_command cmd = { 0 };
+ struct dpio_cmd_open *dpio_cmd;
+ int err;
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPIO_CMDID_OPEN,
+ cmd_flags,
+ 0);
+ dpio_cmd = (struct dpio_cmd_open *)cmd.params;
+ dpio_cmd->dpio_id = cpu_to_le32(dpio_id);
+
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ /* retrieve response parameters */
+ *token = mc_cmd_hdr_read_token(&cmd);
+
+ return 0;
+}
+
+/**
+ * dpio_close() - Close the control session of the object
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPIO object
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpio_close(struct fsl_mc_io *mc_io,
+ u32 cmd_flags,
+ u16 token)
+{
+ struct mc_command cmd = { 0 };
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPIO_CMDID_CLOSE,
+ cmd_flags,
+ token);
+
+ return mc_send_command(mc_io, &cmd);
+}
+
+/**
+ * dpio_enable() - Enable the DPIO, allow I/O portal operations.
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPIO object
+ *
+ * Return: '0' on Success; Error code otherwise
+ */
+int dpio_enable(struct fsl_mc_io *mc_io,
+ u32 cmd_flags,
+ u16 token)
+{
+ struct mc_command cmd = { 0 };
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPIO_CMDID_ENABLE,
+ cmd_flags,
+ token);
+
+ return mc_send_command(mc_io, &cmd);
+}
+
+/**
+ * dpio_disable() - Disable the DPIO, stop any I/O portal operation.
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPIO object
+ *
+ * Return: '0' on Success; Error code otherwise
+ */
+int dpio_disable(struct fsl_mc_io *mc_io,
+ u32 cmd_flags,
+ u16 token)
+{
+ struct mc_command cmd = { 0 };
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPIO_CMDID_DISABLE,
+ cmd_flags,
+ token);
+
+ return mc_send_command(mc_io, &cmd);
+}
+
+/**
+ * dpio_get_attributes() - Retrieve DPIO attributes
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPIO object
+ * @attr: Returned object's attributes
+ *
+ * Return: '0' on Success; Error code otherwise
+ */
+int dpio_get_attributes(struct fsl_mc_io *mc_io,
+ u32 cmd_flags,
+ u16 token,
+ struct dpio_attr *attr)
+{
+ struct mc_command cmd = { 0 };
+ struct dpio_rsp_get_attr *dpio_rsp;
+ int err;
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPIO_CMDID_GET_ATTR,
+ cmd_flags,
+ token);
+
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ /* retrieve response parameters */
+ dpio_rsp = (struct dpio_rsp_get_attr *)cmd.params;
+ attr->id = le32_to_cpu(dpio_rsp->id);
+ attr->qbman_portal_id = le16_to_cpu(dpio_rsp->qbman_portal_id);
+ attr->num_priorities = dpio_rsp->num_priorities;
+ attr->channel_mode = dpio_rsp->channel_mode & DPIO_CHANNEL_MODE_MASK;
+ attr->qbman_portal_ce_offset =
+ le64_to_cpu(dpio_rsp->qbman_portal_ce_addr);
+ attr->qbman_portal_ci_offset =
+ le64_to_cpu(dpio_rsp->qbman_portal_ci_addr);
+ attr->qbman_version = le32_to_cpu(dpio_rsp->qbman_version);
+
+ return 0;
+}
+
+/**
+ * dpio_get_api_version - Get Data Path I/O API version
+ * @mc_io: Pointer to MC portal's DPIO object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @major_ver: Major version of DPIO API
+ * @minor_ver: Minor version of DPIO API
+ *
+ * Return: '0' on Success; Error code otherwise
+ */
+int dpio_get_api_version(struct fsl_mc_io *mc_io,
+ u32 cmd_flags,
+ u16 *major_ver,
+ u16 *minor_ver)
+{
+ struct mc_command cmd = { 0 };
+ int err;
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPIO_CMDID_GET_API_VERSION,
+ cmd_flags, 0);
+
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ /* retrieve response parameters */
+ mc_cmd_read_api_version(&cmd, major_ver, minor_ver);
+
+ return 0;
+}
diff --git a/drivers/soc/fsl/dpio/dpio.h b/drivers/soc/fsl/dpio/dpio.h
new file mode 100644
index 0000000..49194c8
--- /dev/null
+++ b/drivers/soc/fsl/dpio/dpio.h
@@ -0,0 +1,83 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright 2013-2016 Freescale Semiconductor Inc.
+ * Copyright 2016 NXP
+ *
+ */
+#ifndef __FSL_DPIO_H
+#define __FSL_DPIO_H
+
+struct fsl_mc_io;
+
+int dpio_open(struct fsl_mc_io *mc_io,
+ u32 cmd_flags,
+ int dpio_id,
+ u16 *token);
+
+int dpio_close(struct fsl_mc_io *mc_io,
+ u32 cmd_flags,
+ u16 token);
+
+/**
+ * enum dpio_channel_mode - DPIO notification channel mode
+ * @DPIO_NO_CHANNEL: No support for notification channel
+ * @DPIO_LOCAL_CHANNEL: Notifications on data availability can be received by a
+ * dedicated channel in the DPIO; user should point the queue's
+ * destination in the relevant interface to this DPIO
+ */
+enum dpio_channel_mode {
+ DPIO_NO_CHANNEL = 0,
+ DPIO_LOCAL_CHANNEL = 1,
+};
+
+/**
+ * struct dpio_cfg - Structure representing DPIO configuration
+ * @channel_mode: Notification channel mode
+ * @num_priorities: Number of priorities for the notification channel (1-8);
+ * relevant only if 'channel_mode = DPIO_LOCAL_CHANNEL'
+ */
+struct dpio_cfg {
+ enum dpio_channel_mode channel_mode;
+ u8 num_priorities;
+};
+
+int dpio_enable(struct fsl_mc_io *mc_io,
+ u32 cmd_flags,
+ u16 token);
+
+int dpio_disable(struct fsl_mc_io *mc_io,
+ u32 cmd_flags,
+ u16 token);
+
+/**
+ * struct dpio_attr - Structure representing DPIO attributes
+ * @id: DPIO object ID
+ * @qbman_portal_ce_offset: offset of the software portal cache-enabled area
+ * @qbman_portal_ci_offset: offset of the software portal cache-inhibited area
+ * @qbman_portal_id: Software portal ID
+ * @channel_mode: Notification channel mode
+ * @num_priorities: Number of priorities for the notification channel (1-8);
+ * relevant only if 'channel_mode = DPIO_LOCAL_CHANNEL'
+ * @qbman_version: QBMAN version
+ */
+struct dpio_attr {
+ int id;
+ u64 qbman_portal_ce_offset;
+ u64 qbman_portal_ci_offset;
+ u16 qbman_portal_id;
+ enum dpio_channel_mode channel_mode;
+ u8 num_priorities;
+ u32 qbman_version;
+};
+
+int dpio_get_attributes(struct fsl_mc_io *mc_io,
+ u32 cmd_flags,
+ u16 token,
+ struct dpio_attr *attr);
+
+int dpio_get_api_version(struct fsl_mc_io *mc_io,
+ u32 cmd_flags,
+ u16 *major_ver,
+ u16 *minor_ver);
+
+#endif /* __FSL_DPIO_H */
diff --git a/drivers/soc/fsl/dpio/qbman-portal.c b/drivers/soc/fsl/dpio/qbman-portal.c
new file mode 100644
index 0000000..cf1d448
--- /dev/null
+++ b/drivers/soc/fsl/dpio/qbman-portal.c
@@ -0,0 +1,1005 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) 2014-2016 Freescale Semiconductor, Inc.
+ * Copyright 2016 NXP
+ *
+ */
+
+#include <asm/cacheflush.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <soc/fsl/dpaa2-global.h>
+
+#include "qbman-portal.h"
+
+#define QMAN_REV_4000 0x04000000
+#define QMAN_REV_4100 0x04010000
+#define QMAN_REV_4101 0x04010001
+#define QMAN_REV_MASK 0xffff0000
+
+/* All QBMan command and result structures use this "valid bit" encoding */
+#define QB_VALID_BIT ((u32)0x80)
+
+/* QBMan portal management command codes */
+#define QBMAN_MC_ACQUIRE 0x30
+#define QBMAN_WQCHAN_CONFIGURE 0x46
+
+/* CINH register offsets */
+#define QBMAN_CINH_SWP_EQAR 0x8c0
+#define QBMAN_CINH_SWP_DQPI 0xa00
+#define QBMAN_CINH_SWP_DCAP 0xac0
+#define QBMAN_CINH_SWP_SDQCR 0xb00
+#define QBMAN_CINH_SWP_RAR 0xcc0
+#define QBMAN_CINH_SWP_ISR 0xe00
+#define QBMAN_CINH_SWP_IER 0xe40
+#define QBMAN_CINH_SWP_ISDR 0xe80
+#define QBMAN_CINH_SWP_IIR 0xec0
+
+/* CENA register offsets */
+#define QBMAN_CENA_SWP_EQCR(n) (0x000 + ((u32)(n) << 6))
+#define QBMAN_CENA_SWP_DQRR(n) (0x200 + ((u32)(n) << 6))
+#define QBMAN_CENA_SWP_RCR(n) (0x400 + ((u32)(n) << 6))
+#define QBMAN_CENA_SWP_CR 0x600
+#define QBMAN_CENA_SWP_RR(vb) (0x700 + ((u32)(vb) >> 1))
+#define QBMAN_CENA_SWP_VDQCR 0x780
+
+/* Reverse mapping of QBMAN_CENA_SWP_DQRR() */
+#define QBMAN_IDX_FROM_DQRR(p) (((unsigned long)(p) & 0x1ff) >> 6)
+
+/* Define token used to determine if response written to memory is valid */
+#define QMAN_DQ_TOKEN_VALID 1
+
+/* SDQCR attribute codes */
+#define QB_SDQCR_FC_SHIFT 29
+#define QB_SDQCR_FC_MASK 0x1
+#define QB_SDQCR_DCT_SHIFT 24
+#define QB_SDQCR_DCT_MASK 0x3
+#define QB_SDQCR_TOK_SHIFT 16
+#define QB_SDQCR_TOK_MASK 0xff
+#define QB_SDQCR_SRC_SHIFT 0
+#define QB_SDQCR_SRC_MASK 0xffff
+
+/* opaque token for static dequeues */
+#define QMAN_SDQCR_TOKEN 0xbb
+
+enum qbman_sdqcr_dct {
+ qbman_sdqcr_dct_null = 0,
+ qbman_sdqcr_dct_prio_ics,
+ qbman_sdqcr_dct_active_ics,
+ qbman_sdqcr_dct_active
+};
+
+enum qbman_sdqcr_fc {
+ qbman_sdqcr_fc_one = 0,
+ qbman_sdqcr_fc_up_to_3 = 1
+};
+
+/* Portal Access */
+
+static inline u32 qbman_read_register(struct qbman_swp *p, u32 offset)
+{
+ return readl_relaxed(p->addr_cinh + offset);
+}
+
+static inline void qbman_write_register(struct qbman_swp *p, u32 offset,
+ u32 value)
+{
+ writel_relaxed(value, p->addr_cinh + offset);
+}
+
+static inline void *qbman_get_cmd(struct qbman_swp *p, u32 offset)
+{
+ return p->addr_cena + offset;
+}
+
+#define QBMAN_CINH_SWP_CFG 0xd00
+
+#define SWP_CFG_DQRR_MF_SHIFT 20
+#define SWP_CFG_EST_SHIFT 16
+#define SWP_CFG_WN_SHIFT 14
+#define SWP_CFG_RPM_SHIFT 12
+#define SWP_CFG_DCM_SHIFT 10
+#define SWP_CFG_EPM_SHIFT 8
+#define SWP_CFG_SD_SHIFT 5
+#define SWP_CFG_SP_SHIFT 4
+#define SWP_CFG_SE_SHIFT 3
+#define SWP_CFG_DP_SHIFT 2
+#define SWP_CFG_DE_SHIFT 1
+#define SWP_CFG_EP_SHIFT 0
+
+static inline u32 qbman_set_swp_cfg(u8 max_fill, u8 wn, u8 est, u8 rpm, u8 dcm,
+ u8 epm, int sd, int sp, int se,
+ int dp, int de, int ep)
+{
+ return (max_fill << SWP_CFG_DQRR_MF_SHIFT |
+ est << SWP_CFG_EST_SHIFT |
+ wn << SWP_CFG_WN_SHIFT |
+ rpm << SWP_CFG_RPM_SHIFT |
+ dcm << SWP_CFG_DCM_SHIFT |
+ epm << SWP_CFG_EPM_SHIFT |
+ sd << SWP_CFG_SD_SHIFT |
+ sp << SWP_CFG_SP_SHIFT |
+ se << SWP_CFG_SE_SHIFT |
+ dp << SWP_CFG_DP_SHIFT |
+ de << SWP_CFG_DE_SHIFT |
+ ep << SWP_CFG_EP_SHIFT);
+}
+
+/**
+ * qbman_swp_init() - Create a functional object representing the given
+ * QBMan portal descriptor.
+ * @d: the given qbman swp descriptor
+ *
+ * Return qbman_swp portal for success, NULL if the object cannot
+ * be created.
+ */
+struct qbman_swp *qbman_swp_init(const struct qbman_swp_desc *d)
+{
+ struct qbman_swp *p = kmalloc(sizeof(*p), GFP_KERNEL);
+ u32 reg;
+
+ if (!p)
+ return NULL;
+ p->desc = d;
+ p->mc.valid_bit = QB_VALID_BIT;
+ p->sdq = 0;
+ p->sdq |= qbman_sdqcr_dct_prio_ics << QB_SDQCR_DCT_SHIFT;
+ p->sdq |= qbman_sdqcr_fc_up_to_3 << QB_SDQCR_FC_SHIFT;
+ p->sdq |= QMAN_SDQCR_TOKEN << QB_SDQCR_TOK_SHIFT;
+
+ atomic_set(&p->vdq.available, 1);
+ p->vdq.valid_bit = QB_VALID_BIT;
+ p->dqrr.next_idx = 0;
+ p->dqrr.valid_bit = QB_VALID_BIT;
+
+ if ((p->desc->qman_version & QMAN_REV_MASK) < QMAN_REV_4100) {
+ p->dqrr.dqrr_size = 4;
+ p->dqrr.reset_bug = 1;
+ } else {
+ p->dqrr.dqrr_size = 8;
+ p->dqrr.reset_bug = 0;
+ }
+
+ p->addr_cena = d->cena_bar;
+ p->addr_cinh = d->cinh_bar;
+
+ reg = qbman_set_swp_cfg(p->dqrr.dqrr_size,
+ 1, /* Writes Non-cacheable */
+ 0, /* EQCR_CI stashing threshold */
+ 3, /* RPM: Valid bit mode, RCR in array mode */
+ 2, /* DCM: Discrete consumption ack mode */
+ 3, /* EPM: Valid bit mode, EQCR in array mode */
+ 0, /* mem stashing drop enable == FALSE */
+ 1, /* mem stashing priority == TRUE */
+ 0, /* mem stashing enable == FALSE */
+ 1, /* dequeue stashing priority == TRUE */
+ 0, /* dequeue stashing enable == FALSE */
+ 0); /* EQCR_CI stashing priority == FALSE */
+
+ qbman_write_register(p, QBMAN_CINH_SWP_CFG, reg);
+ reg = qbman_read_register(p, QBMAN_CINH_SWP_CFG);
+ if (!reg) {
+ pr_err("qbman: the portal is not enabled!\n");
+ return NULL;
+ }
+
+ /*
+ * SDQCR needs to be initialized to 0 when no channels are
+ * being dequeued from or else the QMan HW will indicate an
+ * error. The values that were calculated above will be
+ * applied when dequeues from a specific channel are enabled.
+ */
+ qbman_write_register(p, QBMAN_CINH_SWP_SDQCR, 0);
+ return p;
+}
+
+/**
+ * qbman_swp_finish() - Create and destroy a functional object representing
+ * the given QBMan portal descriptor.
+ * @p: the qbman_swp object to be destroyed
+ */
+void qbman_swp_finish(struct qbman_swp *p)
+{
+ kfree(p);
+}
+
+/**
+ * qbman_swp_interrupt_read_status()
+ * @p: the given software portal
+ *
+ * Return the value in the SWP_ISR register.
+ */
+u32 qbman_swp_interrupt_read_status(struct qbman_swp *p)
+{
+ return qbman_read_register(p, QBMAN_CINH_SWP_ISR);
+}
+
+/**
+ * qbman_swp_interrupt_clear_status()
+ * @p: the given software portal
+ * @mask: The mask to clear in SWP_ISR register
+ */
+void qbman_swp_interrupt_clear_status(struct qbman_swp *p, u32 mask)
+{
+ qbman_write_register(p, QBMAN_CINH_SWP_ISR, mask);
+}
+
+/**
+ * qbman_swp_interrupt_get_trigger() - read interrupt enable register
+ * @p: the given software portal
+ *
+ * Return the value in the SWP_IER register.
+ */
+u32 qbman_swp_interrupt_get_trigger(struct qbman_swp *p)
+{
+ return qbman_read_register(p, QBMAN_CINH_SWP_IER);
+}
+
+/**
+ * qbman_swp_interrupt_set_trigger() - enable interrupts for a swp
+ * @p: the given software portal
+ * @mask: The mask of bits to enable in SWP_IER
+ */
+void qbman_swp_interrupt_set_trigger(struct qbman_swp *p, u32 mask)
+{
+ qbman_write_register(p, QBMAN_CINH_SWP_IER, mask);
+}
+
+/**
+ * qbman_swp_interrupt_get_inhibit() - read interrupt mask register
+ * @p: the given software portal object
+ *
+ * Return the value in the SWP_IIR register.
+ */
+int qbman_swp_interrupt_get_inhibit(struct qbman_swp *p)
+{
+ return qbman_read_register(p, QBMAN_CINH_SWP_IIR);
+}
+
+/**
+ * qbman_swp_interrupt_set_inhibit() - write interrupt mask register
+ * @p: the given software portal object
+ * @mask: The mask to set in SWP_IIR register
+ */
+void qbman_swp_interrupt_set_inhibit(struct qbman_swp *p, int inhibit)
+{
+ qbman_write_register(p, QBMAN_CINH_SWP_IIR, inhibit ? 0xffffffff : 0);
+}
+
+/*
+ * Different management commands all use this common base layer of code to issue
+ * commands and poll for results.
+ */
+
+/*
+ * Returns a pointer to where the caller should fill in their management command
+ * (caller should ignore the verb byte)
+ */
+void *qbman_swp_mc_start(struct qbman_swp *p)
+{
+ return qbman_get_cmd(p, QBMAN_CENA_SWP_CR);
+}
+
+/*
+ * Commits merges in the caller-supplied command verb (which should not include
+ * the valid-bit) and submits the command to hardware
+ */
+void qbman_swp_mc_submit(struct qbman_swp *p, void *cmd, u8 cmd_verb)
+{
+ u8 *v = cmd;
+
+ dma_wmb();
+ *v = cmd_verb | p->mc.valid_bit;
+}
+
+/*
+ * Checks for a completed response (returns non-NULL if only if the response
+ * is complete).
+ */
+void *qbman_swp_mc_result(struct qbman_swp *p)
+{
+ u32 *ret, verb;
+
+ ret = qbman_get_cmd(p, QBMAN_CENA_SWP_RR(p->mc.valid_bit));
+
+ /* Remove the valid-bit - command completed if the rest is non-zero */
+ verb = ret[0] & ~QB_VALID_BIT;
+ if (!verb)
+ return NULL;
+ p->mc.valid_bit ^= QB_VALID_BIT;
+ return ret;
+}
+
+#define QB_ENQUEUE_CMD_OPTIONS_SHIFT 0
+enum qb_enqueue_commands {
+ enqueue_empty = 0,
+ enqueue_response_always = 1,
+ enqueue_rejects_to_fq = 2
+};
+
+#define QB_ENQUEUE_CMD_ORP_ENABLE_SHIFT 2
+#define QB_ENQUEUE_CMD_IRQ_ON_DISPATCH_SHIFT 3
+#define QB_ENQUEUE_CMD_TARGET_TYPE_SHIFT 4
+
+/**
+ * qbman_eq_desc_clear() - Clear the contents of a descriptor to
+ * default/starting state.
+ */
+void qbman_eq_desc_clear(struct qbman_eq_desc *d)
+{
+ memset(d, 0, sizeof(*d));
+}
+
+/**
+ * qbman_eq_desc_set_no_orp() - Set enqueue descriptor without orp
+ * @d: the enqueue descriptor.
+ * @response_success: 1 = enqueue with response always; 0 = enqueue with
+ * rejections returned on a FQ.
+ */
+void qbman_eq_desc_set_no_orp(struct qbman_eq_desc *d, int respond_success)
+{
+ d->verb &= ~(1 << QB_ENQUEUE_CMD_ORP_ENABLE_SHIFT);
+ if (respond_success)
+ d->verb |= enqueue_response_always;
+ else
+ d->verb |= enqueue_rejects_to_fq;
+}
+
+/*
+ * Exactly one of the following descriptor "targets" should be set. (Calling any
+ * one of these will replace the effect of any prior call to one of these.)
+ * -enqueue to a frame queue
+ * -enqueue to a queuing destination
+ */
+
+/**
+ * qbman_eq_desc_set_fq() - set the FQ for the enqueue command
+ * @d: the enqueue descriptor
+ * @fqid: the id of the frame queue to be enqueued
+ */
+void qbman_eq_desc_set_fq(struct qbman_eq_desc *d, u32 fqid)
+{
+ d->verb &= ~(1 << QB_ENQUEUE_CMD_TARGET_TYPE_SHIFT);
+ d->tgtid = cpu_to_le32(fqid);
+}
+
+/**
+ * qbman_eq_desc_set_qd() - Set Queuing Destination for the enqueue command
+ * @d: the enqueue descriptor
+ * @qdid: the id of the queuing destination to be enqueued
+ * @qd_bin: the queuing destination bin
+ * @qd_prio: the queuing destination priority
+ */
+void qbman_eq_desc_set_qd(struct qbman_eq_desc *d, u32 qdid,
+ u32 qd_bin, u32 qd_prio)
+{
+ d->verb |= 1 << QB_ENQUEUE_CMD_TARGET_TYPE_SHIFT;
+ d->tgtid = cpu_to_le32(qdid);
+ d->qdbin = cpu_to_le16(qd_bin);
+ d->qpri = qd_prio;
+}
+
+#define EQAR_IDX(eqar) ((eqar) & 0x7)
+#define EQAR_VB(eqar) ((eqar) & 0x80)
+#define EQAR_SUCCESS(eqar) ((eqar) & 0x100)
+
+/**
+ * qbman_swp_enqueue() - Issue an enqueue command
+ * @s: the software portal used for enqueue
+ * @d: the enqueue descriptor
+ * @fd: the frame descriptor to be enqueued
+ *
+ * Please note that 'fd' should only be NULL if the "action" of the
+ * descriptor is "orp_hole" or "orp_nesn".
+ *
+ * Return 0 for successful enqueue, -EBUSY if the EQCR is not ready.
+ */
+int qbman_swp_enqueue(struct qbman_swp *s, const struct qbman_eq_desc *d,
+ const struct dpaa2_fd *fd)
+{
+ struct qbman_eq_desc *p;
+ u32 eqar = qbman_read_register(s, QBMAN_CINH_SWP_EQAR);
+
+ if (!EQAR_SUCCESS(eqar))
+ return -EBUSY;
+
+ p = qbman_get_cmd(s, QBMAN_CENA_SWP_EQCR(EQAR_IDX(eqar)));
+ memcpy(&p->dca, &d->dca, 31);
+ memcpy(&p->fd, fd, sizeof(*fd));
+
+ /* Set the verb byte, have to substitute in the valid-bit */
+ dma_wmb();
+ p->verb = d->verb | EQAR_VB(eqar);
+
+ return 0;
+}
+
+/* Static (push) dequeue */
+
+/**
+ * qbman_swp_push_get() - Get the push dequeue setup
+ * @p: the software portal object
+ * @channel_idx: the channel index to query
+ * @enabled: returned boolean to show whether the push dequeue is enabled
+ * for the given channel
+ */
+void qbman_swp_push_get(struct qbman_swp *s, u8 channel_idx, int *enabled)
+{
+ u16 src = (s->sdq >> QB_SDQCR_SRC_SHIFT) & QB_SDQCR_SRC_MASK;
+
+ WARN_ON(channel_idx > 15);
+ *enabled = src | (1 << channel_idx);
+}
+
+/**
+ * qbman_swp_push_set() - Enable or disable push dequeue
+ * @p: the software portal object
+ * @channel_idx: the channel index (0 to 15)
+ * @enable: enable or disable push dequeue
+ */
+void qbman_swp_push_set(struct qbman_swp *s, u8 channel_idx, int enable)
+{
+ u16 dqsrc;
+
+ WARN_ON(channel_idx > 15);
+ if (enable)
+ s->sdq |= 1 << channel_idx;
+ else
+ s->sdq &= ~(1 << channel_idx);
+
+ /* Read make the complete src map. If no channels are enabled
+ * the SDQCR must be 0 or else QMan will assert errors
+ */
+ dqsrc = (s->sdq >> QB_SDQCR_SRC_SHIFT) & QB_SDQCR_SRC_MASK;
+ if (dqsrc != 0)
+ qbman_write_register(s, QBMAN_CINH_SWP_SDQCR, s->sdq);
+ else
+ qbman_write_register(s, QBMAN_CINH_SWP_SDQCR, 0);
+}
+
+#define QB_VDQCR_VERB_DCT_SHIFT 0
+#define QB_VDQCR_VERB_DT_SHIFT 2
+#define QB_VDQCR_VERB_RLS_SHIFT 4
+#define QB_VDQCR_VERB_WAE_SHIFT 5
+
+enum qb_pull_dt_e {
+ qb_pull_dt_channel,
+ qb_pull_dt_workqueue,
+ qb_pull_dt_framequeue
+};
+
+/**
+ * qbman_pull_desc_clear() - Clear the contents of a descriptor to
+ * default/starting state
+ * @d: the pull dequeue descriptor to be cleared
+ */
+void qbman_pull_desc_clear(struct qbman_pull_desc *d)
+{
+ memset(d, 0, sizeof(*d));
+}
+
+/**
+ * qbman_pull_desc_set_storage()- Set the pull dequeue storage
+ * @d: the pull dequeue descriptor to be set
+ * @storage: the pointer of the memory to store the dequeue result
+ * @storage_phys: the physical address of the storage memory
+ * @stash: to indicate whether write allocate is enabled
+ *
+ * If not called, or if called with 'storage' as NULL, the result pull dequeues
+ * will produce results to DQRR. If 'storage' is non-NULL, then results are
+ * produced to the given memory location (using the DMA address which
+ * the caller provides in 'storage_phys'), and 'stash' controls whether or not
+ * those writes to main-memory express a cache-warming attribute.
+ */
+void qbman_pull_desc_set_storage(struct qbman_pull_desc *d,
+ struct dpaa2_dq *storage,
+ dma_addr_t storage_phys,
+ int stash)
+{
+ /* save the virtual address */
+ d->rsp_addr_virt = (u64)(uintptr_t)storage;
+
+ if (!storage) {
+ d->verb &= ~(1 << QB_VDQCR_VERB_RLS_SHIFT);
+ return;
+ }
+ d->verb |= 1 << QB_VDQCR_VERB_RLS_SHIFT;
+ if (stash)
+ d->verb |= 1 << QB_VDQCR_VERB_WAE_SHIFT;
+ else
+ d->verb &= ~(1 << QB_VDQCR_VERB_WAE_SHIFT);
+
+ d->rsp_addr = cpu_to_le64(storage_phys);
+}
+
+/**
+ * qbman_pull_desc_set_numframes() - Set the number of frames to be dequeued
+ * @d: the pull dequeue descriptor to be set
+ * @numframes: number of frames to be set, must be between 1 and 16, inclusive
+ */
+void qbman_pull_desc_set_numframes(struct qbman_pull_desc *d, u8 numframes)
+{
+ d->numf = numframes - 1;
+}
+
+/*
+ * Exactly one of the following descriptor "actions" should be set. (Calling any
+ * one of these will replace the effect of any prior call to one of these.)
+ * - pull dequeue from the given frame queue (FQ)
+ * - pull dequeue from any FQ in the given work queue (WQ)
+ * - pull dequeue from any FQ in any WQ in the given channel
+ */
+
+/**
+ * qbman_pull_desc_set_fq() - Set fqid from which the dequeue command dequeues
+ * @fqid: the frame queue index of the given FQ
+ */
+void qbman_pull_desc_set_fq(struct qbman_pull_desc *d, u32 fqid)
+{
+ d->verb |= 1 << QB_VDQCR_VERB_DCT_SHIFT;
+ d->verb |= qb_pull_dt_framequeue << QB_VDQCR_VERB_DT_SHIFT;
+ d->dq_src = cpu_to_le32(fqid);
+}
+
+/**
+ * qbman_pull_desc_set_wq() - Set wqid from which the dequeue command dequeues
+ * @wqid: composed of channel id and wqid within the channel
+ * @dct: the dequeue command type
+ */
+void qbman_pull_desc_set_wq(struct qbman_pull_desc *d, u32 wqid,
+ enum qbman_pull_type_e dct)
+{
+ d->verb |= dct << QB_VDQCR_VERB_DCT_SHIFT;
+ d->verb |= qb_pull_dt_workqueue << QB_VDQCR_VERB_DT_SHIFT;
+ d->dq_src = cpu_to_le32(wqid);
+}
+
+/**
+ * qbman_pull_desc_set_channel() - Set channelid from which the dequeue command
+ * dequeues
+ * @chid: the channel id to be dequeued
+ * @dct: the dequeue command type
+ */
+void qbman_pull_desc_set_channel(struct qbman_pull_desc *d, u32 chid,
+ enum qbman_pull_type_e dct)
+{
+ d->verb |= dct << QB_VDQCR_VERB_DCT_SHIFT;
+ d->verb |= qb_pull_dt_channel << QB_VDQCR_VERB_DT_SHIFT;
+ d->dq_src = cpu_to_le32(chid);
+}
+
+/**
+ * qbman_swp_pull() - Issue the pull dequeue command
+ * @s: the software portal object
+ * @d: the software portal descriptor which has been configured with
+ * the set of qbman_pull_desc_set_*() calls
+ *
+ * Return 0 for success, and -EBUSY if the software portal is not ready
+ * to do pull dequeue.
+ */
+int qbman_swp_pull(struct qbman_swp *s, struct qbman_pull_desc *d)
+{
+ struct qbman_pull_desc *p;
+
+ if (!atomic_dec_and_test(&s->vdq.available)) {
+ atomic_inc(&s->vdq.available);
+ return -EBUSY;
+ }
+ s->vdq.storage = (void *)(uintptr_t)d->rsp_addr_virt;
+ p = qbman_get_cmd(s, QBMAN_CENA_SWP_VDQCR);
+ p->numf = d->numf;
+ p->tok = QMAN_DQ_TOKEN_VALID;
+ p->dq_src = d->dq_src;
+ p->rsp_addr = d->rsp_addr;
+ p->rsp_addr_virt = d->rsp_addr_virt;
+ dma_wmb();
+
+ /* Set the verb byte, have to substitute in the valid-bit */
+ p->verb = d->verb | s->vdq.valid_bit;
+ s->vdq.valid_bit ^= QB_VALID_BIT;
+
+ return 0;
+}
+
+#define QMAN_DQRR_PI_MASK 0xf
+
+/**
+ * qbman_swp_dqrr_next() - Get an valid DQRR entry
+ * @s: the software portal object
+ *
+ * Return NULL if there are no unconsumed DQRR entries. Return a DQRR entry
+ * only once, so repeated calls can return a sequence of DQRR entries, without
+ * requiring they be consumed immediately or in any particular order.
+ */
+const struct dpaa2_dq *qbman_swp_dqrr_next(struct qbman_swp *s)
+{
+ u32 verb;
+ u32 response_verb;
+ u32 flags;
+ struct dpaa2_dq *p;
+
+ /* Before using valid-bit to detect if something is there, we have to
+ * handle the case of the DQRR reset bug...
+ */
+ if (unlikely(s->dqrr.reset_bug)) {
+ /*
+ * We pick up new entries by cache-inhibited producer index,
+ * which means that a non-coherent mapping would require us to
+ * invalidate and read *only* once that PI has indicated that
+ * there's an entry here. The first trip around the DQRR ring
+ * will be much less efficient than all subsequent trips around
+ * it...
+ */
+ u8 pi = qbman_read_register(s, QBMAN_CINH_SWP_DQPI) &
+ QMAN_DQRR_PI_MASK;
+
+ /* there are new entries if pi != next_idx */
+ if (pi == s->dqrr.next_idx)
+ return NULL;
+
+ /*
+ * if next_idx is/was the last ring index, and 'pi' is
+ * different, we can disable the workaround as all the ring
+ * entries have now been DMA'd to so valid-bit checking is
+ * repaired. Note: this logic needs to be based on next_idx
+ * (which increments one at a time), rather than on pi (which
+ * can burst and wrap-around between our snapshots of it).
+ */
+ if (s->dqrr.next_idx == (s->dqrr.dqrr_size - 1)) {
+ pr_debug("next_idx=%d, pi=%d, clear reset bug\n",
+ s->dqrr.next_idx, pi);
+ s->dqrr.reset_bug = 0;
+ }
+ prefetch(qbman_get_cmd(s,
+ QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx)));
+ }
+
+ p = qbman_get_cmd(s, QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx));
+ verb = p->dq.verb;
+
+ /*
+ * If the valid-bit isn't of the expected polarity, nothing there. Note,
+ * in the DQRR reset bug workaround, we shouldn't need to skip these
+ * check, because we've already determined that a new entry is available
+ * and we've invalidated the cacheline before reading it, so the
+ * valid-bit behaviour is repaired and should tell us what we already
+ * knew from reading PI.
+ */
+ if ((verb & QB_VALID_BIT) != s->dqrr.valid_bit) {
+ prefetch(qbman_get_cmd(s,
+ QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx)));
+ return NULL;
+ }
+ /*
+ * There's something there. Move "next_idx" attention to the next ring
+ * entry (and prefetch it) before returning what we found.
+ */
+ s->dqrr.next_idx++;
+ s->dqrr.next_idx &= s->dqrr.dqrr_size - 1; /* Wrap around */
+ if (!s->dqrr.next_idx)
+ s->dqrr.valid_bit ^= QB_VALID_BIT;
+
+ /*
+ * If this is the final response to a volatile dequeue command
+ * indicate that the vdq is available
+ */
+ flags = p->dq.stat;
+ response_verb = verb & QBMAN_RESULT_MASK;
+ if ((response_verb == QBMAN_RESULT_DQ) &&
+ (flags & DPAA2_DQ_STAT_VOLATILE) &&
+ (flags & DPAA2_DQ_STAT_EXPIRED))
+ atomic_inc(&s->vdq.available);
+
+ prefetch(qbman_get_cmd(s, QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx)));
+
+ return p;
+}
+
+/**
+ * qbman_swp_dqrr_consume() - Consume DQRR entries previously returned from
+ * qbman_swp_dqrr_next().
+ * @s: the software portal object
+ * @dq: the DQRR entry to be consumed
+ */
+void qbman_swp_dqrr_consume(struct qbman_swp *s, const struct dpaa2_dq *dq)
+{
+ qbman_write_register(s, QBMAN_CINH_SWP_DCAP, QBMAN_IDX_FROM_DQRR(dq));
+}
+
+/**
+ * qbman_result_has_new_result() - Check and get the dequeue response from the
+ * dq storage memory set in pull dequeue command
+ * @s: the software portal object
+ * @dq: the dequeue result read from the memory
+ *
+ * Return 1 for getting a valid dequeue result, or 0 for not getting a valid
+ * dequeue result.
+ *
+ * Only used for user-provided storage of dequeue results, not DQRR. For
+ * efficiency purposes, the driver will perform any required endianness
+ * conversion to ensure that the user's dequeue result storage is in host-endian
+ * format. As such, once the user has called qbman_result_has_new_result() and
+ * been returned a valid dequeue result, they should not call it again on
+ * the same memory location (except of course if another dequeue command has
+ * been executed to produce a new result to that location).
+ */
+int qbman_result_has_new_result(struct qbman_swp *s, const struct dpaa2_dq *dq)
+{
+ if (dq->dq.tok != QMAN_DQ_TOKEN_VALID)
+ return 0;
+
+ /*
+ * Set token to be 0 so we will detect change back to 1
+ * next time the looping is traversed. Const is cast away here
+ * as we want users to treat the dequeue responses as read only.
+ */
+ ((struct dpaa2_dq *)dq)->dq.tok = 0;
+
+ /*
+ * Determine whether VDQCR is available based on whether the
+ * current result is sitting in the first storage location of
+ * the busy command.
+ */
+ if (s->vdq.storage == dq) {
+ s->vdq.storage = NULL;
+ atomic_inc(&s->vdq.available);
+ }
+
+ return 1;
+}
+
+/**
+ * qbman_release_desc_clear() - Clear the contents of a descriptor to
+ * default/starting state.
+ */
+void qbman_release_desc_clear(struct qbman_release_desc *d)
+{
+ memset(d, 0, sizeof(*d));
+ d->verb = 1 << 5; /* Release Command Valid */
+}
+
+/**
+ * qbman_release_desc_set_bpid() - Set the ID of the buffer pool to release to
+ */
+void qbman_release_desc_set_bpid(struct qbman_release_desc *d, u16 bpid)
+{
+ d->bpid = cpu_to_le16(bpid);
+}
+
+/**
+ * qbman_release_desc_set_rcdi() - Determines whether or not the portal's RCDI
+ * interrupt source should be asserted after the release command is completed.
+ */
+void qbman_release_desc_set_rcdi(struct qbman_release_desc *d, int enable)
+{
+ if (enable)
+ d->verb |= 1 << 6;
+ else
+ d->verb &= ~(1 << 6);
+}
+
+#define RAR_IDX(rar) ((rar) & 0x7)
+#define RAR_VB(rar) ((rar) & 0x80)
+#define RAR_SUCCESS(rar) ((rar) & 0x100)
+
+/**
+ * qbman_swp_release() - Issue a buffer release command
+ * @s: the software portal object
+ * @d: the release descriptor
+ * @buffers: a pointer pointing to the buffer address to be released
+ * @num_buffers: number of buffers to be released, must be less than 8
+ *
+ * Return 0 for success, -EBUSY if the release command ring is not ready.
+ */
+int qbman_swp_release(struct qbman_swp *s, const struct qbman_release_desc *d,
+ const u64 *buffers, unsigned int num_buffers)
+{
+ int i;
+ struct qbman_release_desc *p;
+ u32 rar;
+
+ if (!num_buffers || (num_buffers > 7))
+ return -EINVAL;
+
+ rar = qbman_read_register(s, QBMAN_CINH_SWP_RAR);
+ if (!RAR_SUCCESS(rar))
+ return -EBUSY;
+
+ /* Start the release command */
+ p = qbman_get_cmd(s, QBMAN_CENA_SWP_RCR(RAR_IDX(rar)));
+ /* Copy the caller's buffer pointers to the command */
+ for (i = 0; i < num_buffers; i++)
+ p->buf[i] = cpu_to_le64(buffers[i]);
+ p->bpid = d->bpid;
+
+ /*
+ * Set the verb byte, have to substitute in the valid-bit and the number
+ * of buffers.
+ */
+ dma_wmb();
+ p->verb = d->verb | RAR_VB(rar) | num_buffers;
+
+ return 0;
+}
+
+struct qbman_acquire_desc {
+ u8 verb;
+ u8 reserved;
+ __le16 bpid;
+ u8 num;
+ u8 reserved2[59];
+};
+
+struct qbman_acquire_rslt {
+ u8 verb;
+ u8 rslt;
+ __le16 reserved;
+ u8 num;
+ u8 reserved2[3];
+ __le64 buf[7];
+};
+
+/**
+ * qbman_swp_acquire() - Issue a buffer acquire command
+ * @s: the software portal object
+ * @bpid: the buffer pool index
+ * @buffers: a pointer pointing to the acquired buffer addresses
+ * @num_buffers: number of buffers to be acquired, must be less than 8
+ *
+ * Return 0 for success, or negative error code if the acquire command
+ * fails.
+ */
+int qbman_swp_acquire(struct qbman_swp *s, u16 bpid, u64 *buffers,
+ unsigned int num_buffers)
+{
+ struct qbman_acquire_desc *p;
+ struct qbman_acquire_rslt *r;
+ int i;
+
+ if (!num_buffers || (num_buffers > 7))
+ return -EINVAL;
+
+ /* Start the management command */
+ p = qbman_swp_mc_start(s);
+
+ if (!p)
+ return -EBUSY;
+
+ /* Encode the caller-provided attributes */
+ p->bpid = cpu_to_le16(bpid);
+ p->num = num_buffers;
+
+ /* Complete the management command */
+ r = qbman_swp_mc_complete(s, p, QBMAN_MC_ACQUIRE);
+ if (unlikely(!r)) {
+ pr_err("qbman: acquire from BPID %d failed, no response\n",
+ bpid);
+ return -EIO;
+ }
+
+ /* Decode the outcome */
+ WARN_ON((r->verb & 0x7f) != QBMAN_MC_ACQUIRE);
+
+ /* Determine success or failure */
+ if (unlikely(r->rslt != QBMAN_MC_RSLT_OK)) {
+ pr_err("qbman: acquire from BPID 0x%x failed, code=0x%02x\n",
+ bpid, r->rslt);
+ return -EIO;
+ }
+
+ WARN_ON(r->num > num_buffers);
+
+ /* Copy the acquired buffers to the caller's array */
+ for (i = 0; i < r->num; i++)
+ buffers[i] = le64_to_cpu(r->buf[i]);
+
+ return (int)r->num;
+}
+
+struct qbman_alt_fq_state_desc {
+ u8 verb;
+ u8 reserved[3];
+ __le32 fqid;
+ u8 reserved2[56];
+};
+
+struct qbman_alt_fq_state_rslt {
+ u8 verb;
+ u8 rslt;
+ u8 reserved[62];
+};
+
+#define ALT_FQ_FQID_MASK 0x00FFFFFF
+
+int qbman_swp_alt_fq_state(struct qbman_swp *s, u32 fqid,
+ u8 alt_fq_verb)
+{
+ struct qbman_alt_fq_state_desc *p;
+ struct qbman_alt_fq_state_rslt *r;
+
+ /* Start the management command */
+ p = qbman_swp_mc_start(s);
+ if (!p)
+ return -EBUSY;
+
+ p->fqid = cpu_to_le32(fqid & ALT_FQ_FQID_MASK);
+
+ /* Complete the management command */
+ r = qbman_swp_mc_complete(s, p, alt_fq_verb);
+ if (unlikely(!r)) {
+ pr_err("qbman: mgmt cmd failed, no response (verb=0x%x)\n",
+ alt_fq_verb);
+ return -EIO;
+ }
+
+ /* Decode the outcome */
+ WARN_ON((r->verb & QBMAN_RESULT_MASK) != alt_fq_verb);
+
+ /* Determine success or failure */
+ if (unlikely(r->rslt != QBMAN_MC_RSLT_OK)) {
+ pr_err("qbman: ALT FQID %d failed: verb = 0x%08x code = 0x%02x\n",
+ fqid, r->verb, r->rslt);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+struct qbman_cdan_ctrl_desc {
+ u8 verb;
+ u8 reserved;
+ __le16 ch;
+ u8 we;
+ u8 ctrl;
+ __le16 reserved2;
+ __le64 cdan_ctx;
+ u8 reserved3[48];
+
+};
+
+struct qbman_cdan_ctrl_rslt {
+ u8 verb;
+ u8 rslt;
+ __le16 ch;
+ u8 reserved[60];
+};
+
+int qbman_swp_CDAN_set(struct qbman_swp *s, u16 channelid,
+ u8 we_mask, u8 cdan_en,
+ u64 ctx)
+{
+ struct qbman_cdan_ctrl_desc *p = NULL;
+ struct qbman_cdan_ctrl_rslt *r = NULL;
+
+ /* Start the management command */
+ p = qbman_swp_mc_start(s);
+ if (!p)
+ return -EBUSY;
+
+ /* Encode the caller-provided attributes */
+ p->ch = cpu_to_le16(channelid);
+ p->we = we_mask;
+ if (cdan_en)
+ p->ctrl = 1;
+ else
+ p->ctrl = 0;
+ p->cdan_ctx = cpu_to_le64(ctx);
+
+ /* Complete the management command */
+ r = qbman_swp_mc_complete(s, p, QBMAN_WQCHAN_CONFIGURE);
+ if (unlikely(!r)) {
+ pr_err("qbman: wqchan config failed, no response\n");
+ return -EIO;
+ }
+
+ WARN_ON((r->verb & 0x7f) != QBMAN_WQCHAN_CONFIGURE);
+
+ /* Determine success or failure */
+ if (unlikely(r->rslt != QBMAN_MC_RSLT_OK)) {
+ pr_err("qbman: CDAN cQID %d failed: code = 0x%02x\n",
+ channelid, r->rslt);
+ return -EIO;
+ }
+
+ return 0;
+}
diff --git a/drivers/soc/fsl/dpio/qbman-portal.h b/drivers/soc/fsl/dpio/qbman-portal.h
new file mode 100644
index 0000000..b2eed20
--- /dev/null
+++ b/drivers/soc/fsl/dpio/qbman-portal.h
@@ -0,0 +1,444 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright (C) 2014-2016 Freescale Semiconductor, Inc.
+ * Copyright 2016 NXP
+ *
+ */
+#ifndef __FSL_QBMAN_PORTAL_H
+#define __FSL_QBMAN_PORTAL_H
+
+#include <soc/fsl/dpaa2-fd.h>
+
+struct dpaa2_dq;
+struct qbman_swp;
+
+/* qbman software portal descriptor structure */
+struct qbman_swp_desc {
+ void *cena_bar; /* Cache-enabled portal base address */
+ void *cinh_bar; /* Cache-inhibited portal base address */
+ u32 qman_version;
+};
+
+#define QBMAN_SWP_INTERRUPT_EQRI 0x01
+#define QBMAN_SWP_INTERRUPT_EQDI 0x02
+#define QBMAN_SWP_INTERRUPT_DQRI 0x04
+#define QBMAN_SWP_INTERRUPT_RCRI 0x08
+#define QBMAN_SWP_INTERRUPT_RCDI 0x10
+#define QBMAN_SWP_INTERRUPT_VDCI 0x20
+
+/* the structure for pull dequeue descriptor */
+struct qbman_pull_desc {
+ u8 verb;
+ u8 numf;
+ u8 tok;
+ u8 reserved;
+ __le32 dq_src;
+ __le64 rsp_addr;
+ u64 rsp_addr_virt;
+ u8 padding[40];
+};
+
+enum qbman_pull_type_e {
+ /* dequeue with priority precedence, respect intra-class scheduling */
+ qbman_pull_type_prio = 1,
+ /* dequeue with active FQ precedence, respect ICS */
+ qbman_pull_type_active,
+ /* dequeue with active FQ precedence, no ICS */
+ qbman_pull_type_active_noics
+};
+
+/* Definitions for parsing dequeue entries */
+#define QBMAN_RESULT_MASK 0x7f
+#define QBMAN_RESULT_DQ 0x60
+#define QBMAN_RESULT_FQRN 0x21
+#define QBMAN_RESULT_FQRNI 0x22
+#define QBMAN_RESULT_FQPN 0x24
+#define QBMAN_RESULT_FQDAN 0x25
+#define QBMAN_RESULT_CDAN 0x26
+#define QBMAN_RESULT_CSCN_MEM 0x27
+#define QBMAN_RESULT_CGCU 0x28
+#define QBMAN_RESULT_BPSCN 0x29
+#define QBMAN_RESULT_CSCN_WQ 0x2a
+
+/* QBMan FQ management command codes */
+#define QBMAN_FQ_SCHEDULE 0x48
+#define QBMAN_FQ_FORCE 0x49
+#define QBMAN_FQ_XON 0x4d
+#define QBMAN_FQ_XOFF 0x4e
+
+/* structure of enqueue descriptor */
+struct qbman_eq_desc {
+ u8 verb;
+ u8 dca;
+ __le16 seqnum;
+ __le16 orpid;
+ __le16 reserved1;
+ __le32 tgtid;
+ __le32 tag;
+ __le16 qdbin;
+ u8 qpri;
+ u8 reserved[3];
+ u8 wae;
+ u8 rspid;
+ __le64 rsp_addr;
+ u8 fd[32];
+};
+
+/* buffer release descriptor */
+struct qbman_release_desc {
+ u8 verb;
+ u8 reserved;
+ __le16 bpid;
+ __le32 reserved2;
+ __le64 buf[7];
+};
+
+/* Management command result codes */
+#define QBMAN_MC_RSLT_OK 0xf0
+
+#define CODE_CDAN_WE_EN 0x1
+#define CODE_CDAN_WE_CTX 0x4
+
+/* portal data structure */
+struct qbman_swp {
+ const struct qbman_swp_desc *desc;
+ void __iomem *addr_cena;
+ void __iomem *addr_cinh;
+
+ /* Management commands */
+ struct {
+ u32 valid_bit; /* 0x00 or 0x80 */
+ } mc;
+
+ /* Push dequeues */
+ u32 sdq;
+
+ /* Volatile dequeues */
+ struct {
+ atomic_t available; /* indicates if a command can be sent */
+ u32 valid_bit; /* 0x00 or 0x80 */
+ struct dpaa2_dq *storage; /* NULL if DQRR */
+ } vdq;
+
+ /* DQRR */
+ struct {
+ u32 next_idx;
+ u32 valid_bit;
+ u8 dqrr_size;
+ int reset_bug; /* indicates dqrr reset workaround is needed */
+ } dqrr;
+};
+
+struct qbman_swp *qbman_swp_init(const struct qbman_swp_desc *d);
+void qbman_swp_finish(struct qbman_swp *p);
+u32 qbman_swp_interrupt_read_status(struct qbman_swp *p);
+void qbman_swp_interrupt_clear_status(struct qbman_swp *p, u32 mask);
+u32 qbman_swp_interrupt_get_trigger(struct qbman_swp *p);
+void qbman_swp_interrupt_set_trigger(struct qbman_swp *p, u32 mask);
+int qbman_swp_interrupt_get_inhibit(struct qbman_swp *p);
+void qbman_swp_interrupt_set_inhibit(struct qbman_swp *p, int inhibit);
+
+void qbman_swp_push_get(struct qbman_swp *p, u8 channel_idx, int *enabled);
+void qbman_swp_push_set(struct qbman_swp *p, u8 channel_idx, int enable);
+
+void qbman_pull_desc_clear(struct qbman_pull_desc *d);
+void qbman_pull_desc_set_storage(struct qbman_pull_desc *d,
+ struct dpaa2_dq *storage,
+ dma_addr_t storage_phys,
+ int stash);
+void qbman_pull_desc_set_numframes(struct qbman_pull_desc *d, u8 numframes);
+void qbman_pull_desc_set_fq(struct qbman_pull_desc *d, u32 fqid);
+void qbman_pull_desc_set_wq(struct qbman_pull_desc *d, u32 wqid,
+ enum qbman_pull_type_e dct);
+void qbman_pull_desc_set_channel(struct qbman_pull_desc *d, u32 chid,
+ enum qbman_pull_type_e dct);
+
+int qbman_swp_pull(struct qbman_swp *p, struct qbman_pull_desc *d);
+
+const struct dpaa2_dq *qbman_swp_dqrr_next(struct qbman_swp *s);
+void qbman_swp_dqrr_consume(struct qbman_swp *s, const struct dpaa2_dq *dq);
+
+int qbman_result_has_new_result(struct qbman_swp *p, const struct dpaa2_dq *dq);
+
+void qbman_eq_desc_clear(struct qbman_eq_desc *d);
+void qbman_eq_desc_set_no_orp(struct qbman_eq_desc *d, int respond_success);
+void qbman_eq_desc_set_token(struct qbman_eq_desc *d, u8 token);
+void qbman_eq_desc_set_fq(struct qbman_eq_desc *d, u32 fqid);
+void qbman_eq_desc_set_qd(struct qbman_eq_desc *d, u32 qdid,
+ u32 qd_bin, u32 qd_prio);
+
+int qbman_swp_enqueue(struct qbman_swp *p, const struct qbman_eq_desc *d,
+ const struct dpaa2_fd *fd);
+
+void qbman_release_desc_clear(struct qbman_release_desc *d);
+void qbman_release_desc_set_bpid(struct qbman_release_desc *d, u16 bpid);
+void qbman_release_desc_set_rcdi(struct qbman_release_desc *d, int enable);
+
+int qbman_swp_release(struct qbman_swp *s, const struct qbman_release_desc *d,
+ const u64 *buffers, unsigned int num_buffers);
+int qbman_swp_acquire(struct qbman_swp *s, u16 bpid, u64 *buffers,
+ unsigned int num_buffers);
+int qbman_swp_alt_fq_state(struct qbman_swp *s, u32 fqid,
+ u8 alt_fq_verb);
+int qbman_swp_CDAN_set(struct qbman_swp *s, u16 channelid,
+ u8 we_mask, u8 cdan_en,
+ u64 ctx);
+
+void *qbman_swp_mc_start(struct qbman_swp *p);
+void qbman_swp_mc_submit(struct qbman_swp *p, void *cmd, u8 cmd_verb);
+void *qbman_swp_mc_result(struct qbman_swp *p);
+
+/**
+ * qbman_result_is_DQ() - check if the dequeue result is a dequeue response
+ * @dq: the dequeue result to be checked
+ *
+ * DQRR entries may contain non-dequeue results, ie. notifications
+ */
+static inline int qbman_result_is_DQ(const struct dpaa2_dq *dq)
+{
+ return ((dq->dq.verb & QBMAN_RESULT_MASK) == QBMAN_RESULT_DQ);
+}
+
+/**
+ * qbman_result_is_SCN() - Check the dequeue result is notification or not
+ * @dq: the dequeue result to be checked
+ *
+ */
+static inline int qbman_result_is_SCN(const struct dpaa2_dq *dq)
+{
+ return !qbman_result_is_DQ(dq);
+}
+
+/* FQ Data Availability */
+static inline int qbman_result_is_FQDAN(const struct dpaa2_dq *dq)
+{
+ return ((dq->dq.verb & QBMAN_RESULT_MASK) == QBMAN_RESULT_FQDAN);
+}
+
+/* Channel Data Availability */
+static inline int qbman_result_is_CDAN(const struct dpaa2_dq *dq)
+{
+ return ((dq->dq.verb & QBMAN_RESULT_MASK) == QBMAN_RESULT_CDAN);
+}
+
+/* Congestion State Change */
+static inline int qbman_result_is_CSCN(const struct dpaa2_dq *dq)
+{
+ return ((dq->dq.verb & QBMAN_RESULT_MASK) == QBMAN_RESULT_CSCN_WQ);
+}
+
+/* Buffer Pool State Change */
+static inline int qbman_result_is_BPSCN(const struct dpaa2_dq *dq)
+{
+ return ((dq->dq.verb & QBMAN_RESULT_MASK) == QBMAN_RESULT_BPSCN);
+}
+
+/* Congestion Group Count Update */
+static inline int qbman_result_is_CGCU(const struct dpaa2_dq *dq)
+{
+ return ((dq->dq.verb & QBMAN_RESULT_MASK) == QBMAN_RESULT_CGCU);
+}
+
+/* Retirement */
+static inline int qbman_result_is_FQRN(const struct dpaa2_dq *dq)
+{
+ return ((dq->dq.verb & QBMAN_RESULT_MASK) == QBMAN_RESULT_FQRN);
+}
+
+/* Retirement Immediate */
+static inline int qbman_result_is_FQRNI(const struct dpaa2_dq *dq)
+{
+ return ((dq->dq.verb & QBMAN_RESULT_MASK) == QBMAN_RESULT_FQRNI);
+}
+
+ /* Park */
+static inline int qbman_result_is_FQPN(const struct dpaa2_dq *dq)
+{
+ return ((dq->dq.verb & QBMAN_RESULT_MASK) == QBMAN_RESULT_FQPN);
+}
+
+/**
+ * qbman_result_SCN_state() - Get the state field in State-change notification
+ */
+static inline u8 qbman_result_SCN_state(const struct dpaa2_dq *scn)
+{
+ return scn->scn.state;
+}
+
+#define SCN_RID_MASK 0x00FFFFFF
+
+/**
+ * qbman_result_SCN_rid() - Get the resource id in State-change notification
+ */
+static inline u32 qbman_result_SCN_rid(const struct dpaa2_dq *scn)
+{
+ return le32_to_cpu(scn->scn.rid_tok) & SCN_RID_MASK;
+}
+
+/**
+ * qbman_result_SCN_ctx() - Get the context data in State-change notification
+ */
+static inline u64 qbman_result_SCN_ctx(const struct dpaa2_dq *scn)
+{
+ return le64_to_cpu(scn->scn.ctx);
+}
+
+/**
+ * qbman_swp_fq_schedule() - Move the fq to the scheduled state
+ * @s: the software portal object
+ * @fqid: the index of frame queue to be scheduled
+ *
+ * There are a couple of different ways that a FQ can end up parked state,
+ * This schedules it.
+ *
+ * Return 0 for success, or negative error code for failure.
+ */
+static inline int qbman_swp_fq_schedule(struct qbman_swp *s, u32 fqid)
+{
+ return qbman_swp_alt_fq_state(s, fqid, QBMAN_FQ_SCHEDULE);
+}
+
+/**
+ * qbman_swp_fq_force() - Force the FQ to fully scheduled state
+ * @s: the software portal object
+ * @fqid: the index of frame queue to be forced
+ *
+ * Force eligible will force a tentatively-scheduled FQ to be fully-scheduled
+ * and thus be available for selection by any channel-dequeuing behaviour (push
+ * or pull). If the FQ is subsequently "dequeued" from the channel and is still
+ * empty at the time this happens, the resulting dq_entry will have no FD.
+ * (qbman_result_DQ_fd() will return NULL.)
+ *
+ * Return 0 for success, or negative error code for failure.
+ */
+static inline int qbman_swp_fq_force(struct qbman_swp *s, u32 fqid)
+{
+ return qbman_swp_alt_fq_state(s, fqid, QBMAN_FQ_FORCE);
+}
+
+/**
+ * qbman_swp_fq_xon() - sets FQ flow-control to XON
+ * @s: the software portal object
+ * @fqid: the index of frame queue
+ *
+ * This setting doesn't affect enqueues to the FQ, just dequeues.
+ *
+ * Return 0 for success, or negative error code for failure.
+ */
+static inline int qbman_swp_fq_xon(struct qbman_swp *s, u32 fqid)
+{
+ return qbman_swp_alt_fq_state(s, fqid, QBMAN_FQ_XON);
+}
+
+/**
+ * qbman_swp_fq_xoff() - sets FQ flow-control to XOFF
+ * @s: the software portal object
+ * @fqid: the index of frame queue
+ *
+ * This setting doesn't affect enqueues to the FQ, just dequeues.
+ * XOFF FQs will remain in the tenatively-scheduled state, even when
+ * non-empty, meaning they won't be selected for scheduled dequeuing.
+ * If a FQ is changed to XOFF after it had already become truly-scheduled
+ * to a channel, and a pull dequeue of that channel occurs that selects
+ * that FQ for dequeuing, then the resulting dq_entry will have no FD.
+ * (qbman_result_DQ_fd() will return NULL.)
+ *
+ * Return 0 for success, or negative error code for failure.
+ */
+static inline int qbman_swp_fq_xoff(struct qbman_swp *s, u32 fqid)
+{
+ return qbman_swp_alt_fq_state(s, fqid, QBMAN_FQ_XOFF);
+}
+
+/* If the user has been allocated a channel object that is going to generate
+ * CDANs to another channel, then the qbman_swp_CDAN* functions will be
+ * necessary.
+ *
+ * CDAN-enabled channels only generate a single CDAN notification, after which
+ * they need to be reenabled before they'll generate another. The idea is
+ * that pull dequeuing will occur in reaction to the CDAN, followed by a
+ * reenable step. Each function generates a distinct command to hardware, so a
+ * combination function is provided if the user wishes to modify the "context"
+ * (which shows up in each CDAN message) each time they reenable, as a single
+ * command to hardware.
+ */
+
+/**
+ * qbman_swp_CDAN_set_context() - Set CDAN context
+ * @s: the software portal object
+ * @channelid: the channel index
+ * @ctx: the context to be set in CDAN
+ *
+ * Return 0 for success, or negative error code for failure.
+ */
+static inline int qbman_swp_CDAN_set_context(struct qbman_swp *s, u16 channelid,
+ u64 ctx)
+{
+ return qbman_swp_CDAN_set(s, channelid,
+ CODE_CDAN_WE_CTX,
+ 0, ctx);
+}
+
+/**
+ * qbman_swp_CDAN_enable() - Enable CDAN for the channel
+ * @s: the software portal object
+ * @channelid: the index of the channel to generate CDAN
+ *
+ * Return 0 for success, or negative error code for failure.
+ */
+static inline int qbman_swp_CDAN_enable(struct qbman_swp *s, u16 channelid)
+{
+ return qbman_swp_CDAN_set(s, channelid,
+ CODE_CDAN_WE_EN,
+ 1, 0);
+}
+
+/**
+ * qbman_swp_CDAN_disable() - disable CDAN for the channel
+ * @s: the software portal object
+ * @channelid: the index of the channel to generate CDAN
+ *
+ * Return 0 for success, or negative error code for failure.
+ */
+static inline int qbman_swp_CDAN_disable(struct qbman_swp *s, u16 channelid)
+{
+ return qbman_swp_CDAN_set(s, channelid,
+ CODE_CDAN_WE_EN,
+ 0, 0);
+}
+
+/**
+ * qbman_swp_CDAN_set_context_enable() - Set CDAN contest and enable CDAN
+ * @s: the software portal object
+ * @channelid: the index of the channel to generate CDAN
+ * @ctx:i the context set in CDAN
+ *
+ * Return 0 for success, or negative error code for failure.
+ */
+static inline int qbman_swp_CDAN_set_context_enable(struct qbman_swp *s,
+ u16 channelid,
+ u64 ctx)
+{
+ return qbman_swp_CDAN_set(s, channelid,
+ CODE_CDAN_WE_EN | CODE_CDAN_WE_CTX,
+ 1, ctx);
+}
+
+/* Wraps up submit + poll-for-result */
+static inline void *qbman_swp_mc_complete(struct qbman_swp *swp, void *cmd,
+ u8 cmd_verb)
+{
+ int loopvar = 1000;
+
+ qbman_swp_mc_submit(swp, cmd, cmd_verb);
+
+ do {
+ cmd = qbman_swp_mc_result(swp);
+ } while (!cmd && loopvar--);
+
+ WARN_ON(!loopvar);
+
+ return cmd;
+}
+
+#endif /* __FSL_QBMAN_PORTAL_H */
diff --git a/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.h b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.h
index e577410..c421733 100644
--- a/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.h
+++ b/drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.h
@@ -36,8 +36,8 @@
#include <linux/netdevice.h>
#include <linux/if_vlan.h>

-#include "../../fsl-mc/include/dpaa2-io.h"
-#include "../../fsl-mc/include/dpaa2-fd.h"
+#include <soc/fsl/dpaa2-io.h>
+#include <soc/fsl/dpaa2-fd.h>
#include "../../fsl-mc/include/dpbp.h"
#include "../../fsl-mc/include/dpcon.h"
#include "dpni.h"
diff --git a/drivers/staging/fsl-mc/bus/Makefile b/drivers/staging/fsl-mc/bus/Makefile
index b67889e..4a3cb8b 100644
--- a/drivers/staging/fsl-mc/bus/Makefile
+++ b/drivers/staging/fsl-mc/bus/Makefile
@@ -7,5 +7,3 @@
obj-$(CONFIG_FSL_MC_BUS) += dpbp.o \
dpcon.o

-# MC DPIO driver
-obj-$(CONFIG_FSL_MC_DPIO) += dpio/
diff --git a/drivers/staging/fsl-mc/bus/dpio/Makefile b/drivers/staging/fsl-mc/bus/dpio/Makefile
deleted file mode 100644
index b9ff24c..0000000
--- a/drivers/staging/fsl-mc/bus/dpio/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# QorIQ DPAA2 DPIO driver
-#
-
-obj-$(CONFIG_FSL_MC_DPIO) += fsl-mc-dpio.o
-
-fsl-mc-dpio-objs := dpio.o qbman-portal.o dpio-service.o dpio-driver.o
diff --git a/drivers/staging/fsl-mc/bus/dpio/dpio-cmd.h b/drivers/staging/fsl-mc/bus/dpio/dpio-cmd.h
deleted file mode 100644
index ab8f82e..0000000
--- a/drivers/staging/fsl-mc/bus/dpio/dpio-cmd.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
-/*
- * Copyright 2013-2016 Freescale Semiconductor Inc.
- * Copyright 2016 NXP
- *
- */
-#ifndef _FSL_DPIO_CMD_H
-#define _FSL_DPIO_CMD_H
-
-/* DPIO Version */
-#define DPIO_VER_MAJOR 4
-#define DPIO_VER_MINOR 2
-
-/* Command Versioning */
-
-#define DPIO_CMD_ID_OFFSET 4
-#define DPIO_CMD_BASE_VERSION 1
-
-#define DPIO_CMD(id) (((id) << DPIO_CMD_ID_OFFSET) | DPIO_CMD_BASE_VERSION)
-
-/* Command IDs */
-#define DPIO_CMDID_CLOSE DPIO_CMD(0x800)
-#define DPIO_CMDID_OPEN DPIO_CMD(0x803)
-#define DPIO_CMDID_GET_API_VERSION DPIO_CMD(0xa03)
-#define DPIO_CMDID_ENABLE DPIO_CMD(0x002)
-#define DPIO_CMDID_DISABLE DPIO_CMD(0x003)
-#define DPIO_CMDID_GET_ATTR DPIO_CMD(0x004)
-
-struct dpio_cmd_open {
- __le32 dpio_id;
-};
-
-#define DPIO_CHANNEL_MODE_MASK 0x3
-
-struct dpio_rsp_get_attr {
- /* cmd word 0 */
- __le32 id;
- __le16 qbman_portal_id;
- u8 num_priorities;
- u8 channel_mode;
- /* cmd word 1 */
- __le64 qbman_portal_ce_addr;
- /* cmd word 2 */
- __le64 qbman_portal_ci_addr;
- /* cmd word 3 */
- __le32 qbman_version;
-};
-
-#endif /* _FSL_DPIO_CMD_H */
diff --git a/drivers/staging/fsl-mc/bus/dpio/dpio-driver.c b/drivers/staging/fsl-mc/bus/dpio/dpio-driver.c
deleted file mode 100644
index 182b384..0000000
--- a/drivers/staging/fsl-mc/bus/dpio/dpio-driver.c
+++ /dev/null
@@ -1,271 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright 2014-2016 Freescale Semiconductor Inc.
- * Copyright NXP 2016
- *
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/msi.h>
-#include <linux/dma-mapping.h>
-#include <linux/delay.h>
-
-#include <linux/fsl/mc.h>
-#include "../../include/dpaa2-io.h"
-
-#include "qbman-portal.h"
-#include "dpio.h"
-#include "dpio-cmd.h"
-
-MODULE_LICENSE("Dual BSD/GPL");
-MODULE_AUTHOR("Freescale Semiconductor, Inc");
-MODULE_DESCRIPTION("DPIO Driver");
-
-struct dpio_priv {
- struct dpaa2_io *io;
-};
-
-static irqreturn_t dpio_irq_handler(int irq_num, void *arg)
-{
- struct device *dev = (struct device *)arg;
- struct dpio_priv *priv = dev_get_drvdata(dev);
-
- return dpaa2_io_irq(priv->io);
-}
-
-static void unregister_dpio_irq_handlers(struct fsl_mc_device *dpio_dev)
-{
- struct fsl_mc_device_irq *irq;
-
- irq = dpio_dev->irqs[0];
-
- /* clear the affinity hint */
- irq_set_affinity_hint(irq->msi_desc->irq, NULL);
-}
-
-static int register_dpio_irq_handlers(struct fsl_mc_device *dpio_dev, int cpu)
-{
- struct dpio_priv *priv;
- int error;
- struct fsl_mc_device_irq *irq;
- cpumask_t mask;
-
- priv = dev_get_drvdata(&dpio_dev->dev);
-
- irq = dpio_dev->irqs[0];
- error = devm_request_irq(&dpio_dev->dev,
- irq->msi_desc->irq,
- dpio_irq_handler,
- 0,
- dev_name(&dpio_dev->dev),
- &dpio_dev->dev);
- if (error < 0) {
- dev_err(&dpio_dev->dev,
- "devm_request_irq() failed: %d\n",
- error);
- return error;
- }
-
- /* set the affinity hint */
- cpumask_clear(&mask);
- cpumask_set_cpu(cpu, &mask);
- if (irq_set_affinity_hint(irq->msi_desc->irq, &mask))
- dev_err(&dpio_dev->dev,
- "irq_set_affinity failed irq %d cpu %d\n",
- irq->msi_desc->irq, cpu);
-
- return 0;
-}
-
-static int dpaa2_dpio_probe(struct fsl_mc_device *dpio_dev)
-{
- struct dpio_attr dpio_attrs;
- struct dpaa2_io_desc desc;
- struct dpio_priv *priv;
- int err = -ENOMEM;
- struct device *dev = &dpio_dev->dev;
- static int next_cpu = -1;
-
- priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
- if (!priv)
- goto err_priv_alloc;
-
- dev_set_drvdata(dev, priv);
-
- err = fsl_mc_portal_allocate(dpio_dev, 0, &dpio_dev->mc_io);
- if (err) {
- dev_dbg(dev, "MC portal allocation failed\n");
- err = -EPROBE_DEFER;
- goto err_mcportal;
- }
-
- err = dpio_open(dpio_dev->mc_io, 0, dpio_dev->obj_desc.id,
- &dpio_dev->mc_handle);
- if (err) {
- dev_err(dev, "dpio_open() failed\n");
- goto err_open;
- }
-
- err = dpio_get_attributes(dpio_dev->mc_io, 0, dpio_dev->mc_handle,
- &dpio_attrs);
- if (err) {
- dev_err(dev, "dpio_get_attributes() failed %d\n", err);
- goto err_get_attr;
- }
- desc.qman_version = dpio_attrs.qbman_version;
-
- err = dpio_enable(dpio_dev->mc_io, 0, dpio_dev->mc_handle);
- if (err) {
- dev_err(dev, "dpio_enable() failed %d\n", err);
- goto err_get_attr;
- }
-
- /* initialize DPIO descriptor */
- desc.receives_notifications = dpio_attrs.num_priorities ? 1 : 0;
- desc.has_8prio = dpio_attrs.num_priorities == 8 ? 1 : 0;
- desc.dpio_id = dpio_dev->obj_desc.id;
-
- /* get the cpu to use for the affinity hint */
- if (next_cpu == -1)
- next_cpu = cpumask_first(cpu_online_mask);
- else
- next_cpu = cpumask_next(next_cpu, cpu_online_mask);
-
- if (!cpu_possible(next_cpu)) {
- dev_err(dev, "probe failed. Number of DPIOs exceeds NR_CPUS.\n");
- err = -ERANGE;
- goto err_allocate_irqs;
- }
- desc.cpu = next_cpu;
-
- /*
- * Set the CENA regs to be the cache inhibited area of the portal to
- * avoid coherency issues if a user migrates to another core.
- */
- desc.regs_cena = ioremap_wc(dpio_dev->regions[1].start,
- resource_size(&dpio_dev->regions[1]));
- desc.regs_cinh = ioremap(dpio_dev->regions[1].start,
- resource_size(&dpio_dev->regions[1]));
-
- err = fsl_mc_allocate_irqs(dpio_dev);
- if (err) {
- dev_err(dev, "fsl_mc_allocate_irqs failed. err=%d\n", err);
- goto err_allocate_irqs;
- }
-
- err = register_dpio_irq_handlers(dpio_dev, desc.cpu);
- if (err)
- goto err_register_dpio_irq;
-
- priv->io = dpaa2_io_create(&desc);
- if (!priv->io) {
- dev_err(dev, "dpaa2_io_create failed\n");
- goto err_dpaa2_io_create;
- }
-
- dev_info(dev, "probed\n");
- dev_dbg(dev, " receives_notifications = %d\n",
- desc.receives_notifications);
- dpio_close(dpio_dev->mc_io, 0, dpio_dev->mc_handle);
- fsl_mc_portal_free(dpio_dev->mc_io);
-
- return 0;
-
-err_dpaa2_io_create:
- unregister_dpio_irq_handlers(dpio_dev);
-err_register_dpio_irq:
- fsl_mc_free_irqs(dpio_dev);
-err_allocate_irqs:
- dpio_disable(dpio_dev->mc_io, 0, dpio_dev->mc_handle);
-err_get_attr:
- dpio_close(dpio_dev->mc_io, 0, dpio_dev->mc_handle);
-err_open:
- fsl_mc_portal_free(dpio_dev->mc_io);
-err_mcportal:
- dev_set_drvdata(dev, NULL);
-err_priv_alloc:
- return err;
-}
-
-/* Tear down interrupts for a given DPIO object */
-static void dpio_teardown_irqs(struct fsl_mc_device *dpio_dev)
-{
- unregister_dpio_irq_handlers(dpio_dev);
- fsl_mc_free_irqs(dpio_dev);
-}
-
-static int dpaa2_dpio_remove(struct fsl_mc_device *dpio_dev)
-{
- struct device *dev;
- struct dpio_priv *priv;
- int err;
-
- dev = &dpio_dev->dev;
- priv = dev_get_drvdata(dev);
-
- dpaa2_io_down(priv->io);
-
- dpio_teardown_irqs(dpio_dev);
-
- err = fsl_mc_portal_allocate(dpio_dev, 0, &dpio_dev->mc_io);
- if (err) {
- dev_err(dev, "MC portal allocation failed\n");
- goto err_mcportal;
- }
-
- err = dpio_open(dpio_dev->mc_io, 0, dpio_dev->obj_desc.id,
- &dpio_dev->mc_handle);
- if (err) {
- dev_err(dev, "dpio_open() failed\n");
- goto err_open;
- }
-
- dpio_disable(dpio_dev->mc_io, 0, dpio_dev->mc_handle);
-
- dpio_close(dpio_dev->mc_io, 0, dpio_dev->mc_handle);
-
- fsl_mc_portal_free(dpio_dev->mc_io);
-
- dev_set_drvdata(dev, NULL);
-
- return 0;
-
-err_open:
- fsl_mc_portal_free(dpio_dev->mc_io);
-err_mcportal:
- return err;
-}
-
-static const struct fsl_mc_device_id dpaa2_dpio_match_id_table[] = {
- {
- .vendor = FSL_MC_VENDOR_FREESCALE,
- .obj_type = "dpio",
- },
- { .vendor = 0x0 }
-};
-
-static struct fsl_mc_driver dpaa2_dpio_driver = {
- .driver = {
- .name = KBUILD_MODNAME,
- .owner = THIS_MODULE,
- },
- .probe = dpaa2_dpio_probe,
- .remove = dpaa2_dpio_remove,
- .match_id_table = dpaa2_dpio_match_id_table
-};
-
-static int dpio_driver_init(void)
-{
- return fsl_mc_driver_register(&dpaa2_dpio_driver);
-}
-
-static void dpio_driver_exit(void)
-{
- fsl_mc_driver_unregister(&dpaa2_dpio_driver);
-}
-module_init(dpio_driver_init);
-module_exit(dpio_driver_exit);
diff --git a/drivers/staging/fsl-mc/bus/dpio/dpio-driver.txt b/drivers/staging/fsl-mc/bus/dpio/dpio-driver.txt
deleted file mode 100644
index 0ba6771..0000000
--- a/drivers/staging/fsl-mc/bus/dpio/dpio-driver.txt
+++ /dev/null
@@ -1,135 +0,0 @@
-Copyright 2016 NXP
-
-Introduction
-------------
-
-A DPAA2 DPIO (Data Path I/O) is a hardware object that provides
-interfaces to enqueue and dequeue frames to/from network interfaces
-and other accelerators. A DPIO also provides hardware buffer
-pool management for network interfaces.
-
-This document provides an overview the Linux DPIO driver, its
-subcomponents, and its APIs.
-
-See Documentation/dpaa2/overview.txt for a general overview of DPAA2
-and the general DPAA2 driver architecture in Linux.
-
-Driver Overview
----------------
-
-The DPIO driver is bound to DPIO objects discovered on the fsl-mc bus and
-provides services that:
- A) allow other drivers, such as the Ethernet driver, to enqueue and dequeue
- frames for their respective objects
- B) allow drivers to register callbacks for data availability notifications
- when data becomes available on a queue or channel
- C) allow drivers to manage hardware buffer pools
-
-The Linux DPIO driver consists of 3 primary components--
- DPIO object driver-- fsl-mc driver that manages the DPIO object
- DPIO service-- provides APIs to other Linux drivers for services
- QBman portal interface-- sends portal commands, gets responses
-
- fsl-mc other
- bus drivers
- | |
- +---+----+ +------+-----+
- |DPIO obj| |DPIO service|
- | driver |---| (DPIO) |
- +--------+ +------+-----+
- |
- +------+-----+
- | QBman |
- | portal i/f |
- +------------+
- |
- hardware
-
-The diagram below shows how the DPIO driver components fit with the other
-DPAA2 Linux driver components:
- +------------+
- | OS Network |
- | Stack |
- +------------+ +------------+
- | Allocator |. . . . . . . | Ethernet |
- |(DPMCP,DPBP)| | (DPNI) |
- +-.----------+ +---+---+----+
- . . ^ |
- . . <data avail, | |<enqueue,
- . . tx confirm> | | dequeue>
- +-------------+ . | |
- | DPRC driver | . +--------+ +------------+
- | (DPRC) | . . |DPIO obj| |DPIO service|
- +----------+--+ | driver |-| (DPIO) |
- | +--------+ +------+-----+
- |<dev add/remove> +------|-----+
- | | QBman |
- +----+--------------+ | portal i/f |
- | MC-bus driver | +------------+
- | | |
- | /soc/fsl-mc | |
- +-------------------+ |
- |
- =========================================|=========|========================
- +-+--DPIO---|-----------+
- | | |
- | QBman Portal |
- +-----------------------+
-
- ============================================================================
-
-
-DPIO Object Driver (dpio-driver.c)
-----------------------------------
-
- The dpio-driver component registers with the fsl-mc bus to handle objects of
- type "dpio". The implementation of probe() handles basic initialization
- of the DPIO including mapping of the DPIO regions (the QBman SW portal)
- and initializing interrupts and registering irq handlers. The dpio-driver
- registers the probed DPIO with dpio-service.
-
-DPIO service (dpio-service.c, dpaa2-io.h)
-------------------------------------------
-
- The dpio service component provides queuing, notification, and buffers
- management services to DPAA2 drivers, such as the Ethernet driver. A system
- will typically allocate 1 DPIO object per CPU to allow queuing operations
- to happen simultaneously across all CPUs.
-
- Notification handling
- dpaa2_io_service_register()
- dpaa2_io_service_deregister()
- dpaa2_io_service_rearm()
-
- Queuing
- dpaa2_io_service_pull_fq()
- dpaa2_io_service_pull_channel()
- dpaa2_io_service_enqueue_fq()
- dpaa2_io_service_enqueue_qd()
- dpaa2_io_store_create()
- dpaa2_io_store_destroy()
- dpaa2_io_store_next()
-
- Buffer pool management
- dpaa2_io_service_release()
- dpaa2_io_service_acquire()
-
-QBman portal interface (qbman-portal.c)
----------------------------------------
-
- The qbman-portal component provides APIs to do the low level hardware
- bit twiddling for operations such as:
- -initializing Qman software portals
- -building and sending portal commands
- -portal interrupt configuration and processing
-
- The qbman-portal APIs are not public to other drivers, and are
- only used by dpio-service.
-
-Other (dpaa2-fd.h, dpaa2-global.h)
-----------------------------------
-
- Frame descriptor and scatter-gather definitions and the APIs used to
- manipulate them are defined in dpaa2-fd.h.
-
- Dequeue result struct and parsing APIs are defined in dpaa2-global.h.
diff --git a/drivers/staging/fsl-mc/bus/dpio/dpio-service.c b/drivers/staging/fsl-mc/bus/dpio/dpio-service.c
deleted file mode 100644
index 14ed2be..0000000
--- a/drivers/staging/fsl-mc/bus/dpio/dpio-service.c
+++ /dev/null
@@ -1,545 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright 2014-2016 Freescale Semiconductor Inc.
- * Copyright 2016 NXP
- *
- */
-#include <linux/types.h>
-#include <linux/fsl/mc.h>
-#include "../../include/dpaa2-io.h"
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/dma-mapping.h>
-#include <linux/slab.h>
-
-#include "dpio.h"
-#include "qbman-portal.h"
-
-struct dpaa2_io {
- struct dpaa2_io_desc dpio_desc;
- struct qbman_swp_desc swp_desc;
- struct qbman_swp *swp;
- struct list_head node;
- /* protect against multiple management commands */
- spinlock_t lock_mgmt_cmd;
- /* protect notifications list */
- spinlock_t lock_notifications;
- struct list_head notifications;
-};
-
-struct dpaa2_io_store {
- unsigned int max;
- dma_addr_t paddr;
- struct dpaa2_dq *vaddr;
- void *alloced_addr; /* unaligned value from kmalloc() */
- unsigned int idx; /* position of the next-to-be-returned entry */
- struct qbman_swp *swp; /* portal used to issue VDQCR */
- struct device *dev; /* device used for DMA mapping */
-};
-
-/* keep a per cpu array of DPIOs for fast access */
-static struct dpaa2_io *dpio_by_cpu[NR_CPUS];
-static struct list_head dpio_list = LIST_HEAD_INIT(dpio_list);
-static DEFINE_SPINLOCK(dpio_list_lock);
-
-static inline struct dpaa2_io *service_select_by_cpu(struct dpaa2_io *d,
- int cpu)
-{
- if (d)
- return d;
-
- if (cpu != DPAA2_IO_ANY_CPU && cpu >= num_possible_cpus())
- return NULL;
-
- /*
- * If cpu == -1, choose the current cpu, with no guarantees about
- * potentially being migrated away.
- */
- if (unlikely(cpu < 0))
- cpu = smp_processor_id();
-
- /* If a specific cpu was requested, pick it up immediately */
- return dpio_by_cpu[cpu];
-}
-
-static inline struct dpaa2_io *service_select(struct dpaa2_io *d)
-{
- if (d)
- return d;
-
- spin_lock(&dpio_list_lock);
- d = list_entry(dpio_list.next, struct dpaa2_io, node);
- list_del(&d->node);
- list_add_tail(&d->node, &dpio_list);
- spin_unlock(&dpio_list_lock);
-
- return d;
-}
-
-/**
- * dpaa2_io_service_select() - return a dpaa2_io service affined to this cpu
- * @cpu: the cpu id
- *
- * Return the affine dpaa2_io service, or NULL if there is no service affined
- * to the specified cpu. If DPAA2_IO_ANY_CPU is used, return the next available
- * service.
- */
-struct dpaa2_io *dpaa2_io_service_select(int cpu)
-{
- if (cpu == DPAA2_IO_ANY_CPU)
- return service_select(NULL);
-
- return service_select_by_cpu(NULL, cpu);
-}
-EXPORT_SYMBOL_GPL(dpaa2_io_service_select);
-
-/**
- * dpaa2_io_create() - create a dpaa2_io object.
- * @desc: the dpaa2_io descriptor
- *
- * Activates a "struct dpaa2_io" corresponding to the given config of an actual
- * DPIO object.
- *
- * Return a valid dpaa2_io object for success, or NULL for failure.
- */
-struct dpaa2_io *dpaa2_io_create(const struct dpaa2_io_desc *desc)
-{
- struct dpaa2_io *obj = kmalloc(sizeof(*obj), GFP_KERNEL);
-
- if (!obj)
- return NULL;
-
- /* check if CPU is out of range (-1 means any cpu) */
- if (desc->cpu != DPAA2_IO_ANY_CPU && desc->cpu >= num_possible_cpus()) {
- kfree(obj);
- return NULL;
- }
-
- obj->dpio_desc = *desc;
- obj->swp_desc.cena_bar = obj->dpio_desc.regs_cena;
- obj->swp_desc.cinh_bar = obj->dpio_desc.regs_cinh;
- obj->swp_desc.qman_version = obj->dpio_desc.qman_version;
- obj->swp = qbman_swp_init(&obj->swp_desc);
-
- if (!obj->swp) {
- kfree(obj);
- return NULL;
- }
-
- INIT_LIST_HEAD(&obj->node);
- spin_lock_init(&obj->lock_mgmt_cmd);
- spin_lock_init(&obj->lock_notifications);
- INIT_LIST_HEAD(&obj->notifications);
-
- /* For now only enable DQRR interrupts */
- qbman_swp_interrupt_set_trigger(obj->swp,
- QBMAN_SWP_INTERRUPT_DQRI);
- qbman_swp_interrupt_clear_status(obj->swp, 0xffffffff);
- if (obj->dpio_desc.receives_notifications)
- qbman_swp_push_set(obj->swp, 0, 1);
-
- spin_lock(&dpio_list_lock);
- list_add_tail(&obj->node, &dpio_list);
- if (desc->cpu >= 0 && !dpio_by_cpu[desc->cpu])
- dpio_by_cpu[desc->cpu] = obj;
- spin_unlock(&dpio_list_lock);
-
- return obj;
-}
-
-/**
- * dpaa2_io_down() - release the dpaa2_io object.
- * @d: the dpaa2_io object to be released.
- *
- * The "struct dpaa2_io" type can represent an individual DPIO object (as
- * described by "struct dpaa2_io_desc") or an instance of a "DPIO service",
- * which can be used to group/encapsulate multiple DPIO objects. In all cases,
- * each handle obtained should be released using this function.
- */
-void dpaa2_io_down(struct dpaa2_io *d)
-{
- kfree(d);
-}
-
-#define DPAA_POLL_MAX 32
-
-/**
- * dpaa2_io_irq() - ISR for DPIO interrupts
- *
- * @obj: the given DPIO object.
- *
- * Return IRQ_HANDLED for success or IRQ_NONE if there
- * were no pending interrupts.
- */
-irqreturn_t dpaa2_io_irq(struct dpaa2_io *obj)
-{
- const struct dpaa2_dq *dq;
- int max = 0;
- struct qbman_swp *swp;
- u32 status;
-
- swp = obj->swp;
- status = qbman_swp_interrupt_read_status(swp);
- if (!status)
- return IRQ_NONE;
-
- dq = qbman_swp_dqrr_next(swp);
- while (dq) {
- if (qbman_result_is_SCN(dq)) {
- struct dpaa2_io_notification_ctx *ctx;
- u64 q64;
-
- q64 = qbman_result_SCN_ctx(dq);
- ctx = (void *)(uintptr_t)q64;
- ctx->cb(ctx);
- } else {
- pr_crit("fsl-mc-dpio: Unrecognised/ignored DQRR entry\n");
- }
- qbman_swp_dqrr_consume(swp, dq);
- ++max;
- if (max > DPAA_POLL_MAX)
- goto done;
- dq = qbman_swp_dqrr_next(swp);
- }
-done:
- qbman_swp_interrupt_clear_status(swp, status);
- qbman_swp_interrupt_set_inhibit(swp, 0);
- return IRQ_HANDLED;
-}
-
-/**
- * dpaa2_io_service_register() - Prepare for servicing of FQDAN or CDAN
- * notifications on the given DPIO service.
- * @d: the given DPIO service.
- * @ctx: the notification context.
- *
- * The caller should make the MC command to attach a DPAA2 object to
- * a DPIO after this function completes successfully. In that way:
- * (a) The DPIO service is "ready" to handle a notification arrival
- * (which might happen before the "attach" command to MC has
- * returned control of execution back to the caller)
- * (b) The DPIO service can provide back to the caller the 'dpio_id' and
- * 'qman64' parameters that it should pass along in the MC command
- * in order for the object to be configured to produce the right
- * notification fields to the DPIO service.
- *
- * Return 0 for success, or -ENODEV for failure.
- */
-int dpaa2_io_service_register(struct dpaa2_io *d,
- struct dpaa2_io_notification_ctx *ctx)
-{
- unsigned long irqflags;
-
- d = service_select_by_cpu(d, ctx->desired_cpu);
- if (!d)
- return -ENODEV;
-
- ctx->dpio_id = d->dpio_desc.dpio_id;
- ctx->qman64 = (u64)(uintptr_t)ctx;
- ctx->dpio_private = d;
- spin_lock_irqsave(&d->lock_notifications, irqflags);
- list_add(&ctx->node, &d->notifications);
- spin_unlock_irqrestore(&d->lock_notifications, irqflags);
-
- /* Enable the generation of CDAN notifications */
- if (ctx->is_cdan)
- return qbman_swp_CDAN_set_context_enable(d->swp,
- (u16)ctx->id,
- ctx->qman64);
- return 0;
-}
-EXPORT_SYMBOL_GPL(dpaa2_io_service_register);
-
-/**
- * dpaa2_io_service_deregister - The opposite of 'register'.
- * @service: the given DPIO service.
- * @ctx: the notification context.
- *
- * This function should be called only after sending the MC command to
- * to detach the notification-producing device from the DPIO.
- */
-void dpaa2_io_service_deregister(struct dpaa2_io *service,
- struct dpaa2_io_notification_ctx *ctx)
-{
- struct dpaa2_io *d = ctx->dpio_private;
- unsigned long irqflags;
-
- if (ctx->is_cdan)
- qbman_swp_CDAN_disable(d->swp, (u16)ctx->id);
-
- spin_lock_irqsave(&d->lock_notifications, irqflags);
- list_del(&ctx->node);
- spin_unlock_irqrestore(&d->lock_notifications, irqflags);
-}
-EXPORT_SYMBOL_GPL(dpaa2_io_service_deregister);
-
-/**
- * dpaa2_io_service_rearm() - Rearm the notification for the given DPIO service.
- * @d: the given DPIO service.
- * @ctx: the notification context.
- *
- * Once a FQDAN/CDAN has been produced, the corresponding FQ/channel is
- * considered "disarmed". Ie. the user can issue pull dequeue operations on that
- * traffic source for as long as it likes. Eventually it may wish to "rearm"
- * that source to allow it to produce another FQDAN/CDAN, that's what this
- * function achieves.
- *
- * Return 0 for success.
- */
-int dpaa2_io_service_rearm(struct dpaa2_io *d,
- struct dpaa2_io_notification_ctx *ctx)
-{
- unsigned long irqflags;
- int err;
-
- d = service_select_by_cpu(d, ctx->desired_cpu);
- if (!unlikely(d))
- return -ENODEV;
-
- spin_lock_irqsave(&d->lock_mgmt_cmd, irqflags);
- if (ctx->is_cdan)
- err = qbman_swp_CDAN_enable(d->swp, (u16)ctx->id);
- else
- err = qbman_swp_fq_schedule(d->swp, ctx->id);
- spin_unlock_irqrestore(&d->lock_mgmt_cmd, irqflags);
-
- return err;
-}
-EXPORT_SYMBOL_GPL(dpaa2_io_service_rearm);
-
-/**
- * dpaa2_io_service_pull_channel() - pull dequeue functions from a channel.
- * @d: the given DPIO service.
- * @channelid: the given channel id.
- * @s: the dpaa2_io_store object for the result.
- *
- * Return 0 for success, or error code for failure.
- */
-int dpaa2_io_service_pull_channel(struct dpaa2_io *d, u32 channelid,
- struct dpaa2_io_store *s)
-{
- struct qbman_pull_desc pd;
- int err;
-
- qbman_pull_desc_clear(&pd);
- qbman_pull_desc_set_storage(&pd, s->vaddr, s->paddr, 1);
- qbman_pull_desc_set_numframes(&pd, (u8)s->max);
- qbman_pull_desc_set_channel(&pd, channelid, qbman_pull_type_prio);
-
- d = service_select(d);
- if (!d)
- return -ENODEV;
-
- s->swp = d->swp;
- err = qbman_swp_pull(d->swp, &pd);
- if (err)
- s->swp = NULL;
-
- return err;
-}
-EXPORT_SYMBOL_GPL(dpaa2_io_service_pull_channel);
-
-/**
- * dpaa2_io_service_enqueue_qd() - Enqueue a frame to a QD.
- * @d: the given DPIO service.
- * @qdid: the given queuing destination id.
- * @prio: the given queuing priority.
- * @qdbin: the given queuing destination bin.
- * @fd: the frame descriptor which is enqueued.
- *
- * Return 0 for successful enqueue, or -EBUSY if the enqueue ring is not ready,
- * or -ENODEV if there is no dpio service.
- */
-int dpaa2_io_service_enqueue_qd(struct dpaa2_io *d,
- u32 qdid, u8 prio, u16 qdbin,
- const struct dpaa2_fd *fd)
-{
- struct qbman_eq_desc ed;
-
- d = service_select(d);
- if (!d)
- return -ENODEV;
-
- qbman_eq_desc_clear(&ed);
- qbman_eq_desc_set_no_orp(&ed, 0);
- qbman_eq_desc_set_qd(&ed, qdid, qdbin, prio);
-
- return qbman_swp_enqueue(d->swp, &ed, fd);
-}
-EXPORT_SYMBOL_GPL(dpaa2_io_service_enqueue_qd);
-
-/**
- * dpaa2_io_service_release() - Release buffers to a buffer pool.
- * @d: the given DPIO object.
- * @bpid: the buffer pool id.
- * @buffers: the buffers to be released.
- * @num_buffers: the number of the buffers to be released.
- *
- * Return 0 for success, and negative error code for failure.
- */
-int dpaa2_io_service_release(struct dpaa2_io *d,
- u32 bpid,
- const u64 *buffers,
- unsigned int num_buffers)
-{
- struct qbman_release_desc rd;
-
- d = service_select(d);
- if (!d)
- return -ENODEV;
-
- qbman_release_desc_clear(&rd);
- qbman_release_desc_set_bpid(&rd, bpid);
-
- return qbman_swp_release(d->swp, &rd, buffers, num_buffers);
-}
-EXPORT_SYMBOL_GPL(dpaa2_io_service_release);
-
-/**
- * dpaa2_io_service_acquire() - Acquire buffers from a buffer pool.
- * @d: the given DPIO object.
- * @bpid: the buffer pool id.
- * @buffers: the buffer addresses for acquired buffers.
- * @num_buffers: the expected number of the buffers to acquire.
- *
- * Return a negative error code if the command failed, otherwise it returns
- * the number of buffers acquired, which may be less than the number requested.
- * Eg. if the buffer pool is empty, this will return zero.
- */
-int dpaa2_io_service_acquire(struct dpaa2_io *d,
- u32 bpid,
- u64 *buffers,
- unsigned int num_buffers)
-{
- unsigned long irqflags;
- int err;
-
- d = service_select(d);
- if (!d)
- return -ENODEV;
-
- spin_lock_irqsave(&d->lock_mgmt_cmd, irqflags);
- err = qbman_swp_acquire(d->swp, bpid, buffers, num_buffers);
- spin_unlock_irqrestore(&d->lock_mgmt_cmd, irqflags);
-
- return err;
-}
-EXPORT_SYMBOL_GPL(dpaa2_io_service_acquire);
-
-/*
- * 'Stores' are reusable memory blocks for holding dequeue results, and to
- * assist with parsing those results.
- */
-
-/**
- * dpaa2_io_store_create() - Create the dma memory storage for dequeue result.
- * @max_frames: the maximum number of dequeued result for frames, must be <= 16.
- * @dev: the device to allow mapping/unmapping the DMAable region.
- *
- * The size of the storage is "max_frames*sizeof(struct dpaa2_dq)".
- * The 'dpaa2_io_store' returned is a DPIO service managed object.
- *
- * Return pointer to dpaa2_io_store struct for successfully created storage
- * memory, or NULL on error.
- */
-struct dpaa2_io_store *dpaa2_io_store_create(unsigned int max_frames,
- struct device *dev)
-{
- struct dpaa2_io_store *ret;
- size_t size;
-
- if (!max_frames || (max_frames > 16))
- return NULL;
-
- ret = kmalloc(sizeof(*ret), GFP_KERNEL);
- if (!ret)
- return NULL;
-
- ret->max = max_frames;
- size = max_frames * sizeof(struct dpaa2_dq) + 64;
- ret->alloced_addr = kzalloc(size, GFP_KERNEL);
- if (!ret->alloced_addr) {
- kfree(ret);
- return NULL;
- }
-
- ret->vaddr = PTR_ALIGN(ret->alloced_addr, 64);
- ret->paddr = dma_map_single(dev, ret->vaddr,
- sizeof(struct dpaa2_dq) * max_frames,
- DMA_FROM_DEVICE);
- if (dma_mapping_error(dev, ret->paddr)) {
- kfree(ret->alloced_addr);
- kfree(ret);
- return NULL;
- }
-
- ret->idx = 0;
- ret->dev = dev;
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(dpaa2_io_store_create);
-
-/**
- * dpaa2_io_store_destroy() - Frees the dma memory storage for dequeue
- * result.
- * @s: the storage memory to be destroyed.
- */
-void dpaa2_io_store_destroy(struct dpaa2_io_store *s)
-{
- dma_unmap_single(s->dev, s->paddr, sizeof(struct dpaa2_dq) * s->max,
- DMA_FROM_DEVICE);
- kfree(s->alloced_addr);
- kfree(s);
-}
-EXPORT_SYMBOL_GPL(dpaa2_io_store_destroy);
-
-/**
- * dpaa2_io_store_next() - Determine when the next dequeue result is available.
- * @s: the dpaa2_io_store object.
- * @is_last: indicate whether this is the last frame in the pull command.
- *
- * When an object driver performs dequeues to a dpaa2_io_store, this function
- * can be used to determine when the next frame result is available. Once
- * this function returns non-NULL, a subsequent call to it will try to find
- * the next dequeue result.
- *
- * Note that if a pull-dequeue has a NULL result because the target FQ/channel
- * was empty, then this function will also return NULL (rather than expecting
- * the caller to always check for this. As such, "is_last" can be used to
- * differentiate between "end-of-empty-dequeue" and "still-waiting".
- *
- * Return dequeue result for a valid dequeue result, or NULL for empty dequeue.
- */
-struct dpaa2_dq *dpaa2_io_store_next(struct dpaa2_io_store *s, int *is_last)
-{
- int match;
- struct dpaa2_dq *ret = &s->vaddr[s->idx];
-
- match = qbman_result_has_new_result(s->swp, ret);
- if (!match) {
- *is_last = 0;
- return NULL;
- }
-
- s->idx++;
-
- if (dpaa2_dq_is_pull_complete(ret)) {
- *is_last = 1;
- s->idx = 0;
- /*
- * If we get an empty dequeue result to terminate a zero-results
- * vdqcr, return NULL to the caller rather than expecting him to
- * check non-NULL results every time.
- */
- if (!(dpaa2_dq_flags(ret) & DPAA2_DQ_STAT_VALIDFRAME))
- ret = NULL;
- } else {
- *is_last = 0;
- }
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(dpaa2_io_store_next);
diff --git a/drivers/staging/fsl-mc/bus/dpio/dpio.c b/drivers/staging/fsl-mc/bus/dpio/dpio.c
deleted file mode 100644
index 3175057..0000000
--- a/drivers/staging/fsl-mc/bus/dpio/dpio.c
+++ /dev/null
@@ -1,198 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright 2013-2016 Freescale Semiconductor Inc.
- * Copyright 2016 NXP
- *
- */
-#include <linux/kernel.h>
-#include <linux/fsl/mc.h>
-
-#include "dpio.h"
-#include "dpio-cmd.h"
-
-/*
- * Data Path I/O Portal API
- * Contains initialization APIs and runtime control APIs for DPIO
- */
-
-/**
- * dpio_open() - Open a control session for the specified object
- * @mc_io: Pointer to MC portal's I/O object
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @dpio_id: DPIO unique ID
- * @token: Returned token; use in subsequent API calls
- *
- * This function can be used to open a control session for an
- * already created object; an object may have been declared in
- * the DPL or by calling the dpio_create() function.
- * This function returns a unique authentication token,
- * associated with the specific object ID and the specific MC
- * portal; this token must be used in all subsequent commands for
- * this specific object.
- *
- * Return: '0' on Success; Error code otherwise.
- */
-int dpio_open(struct fsl_mc_io *mc_io,
- u32 cmd_flags,
- int dpio_id,
- u16 *token)
-{
- struct mc_command cmd = { 0 };
- struct dpio_cmd_open *dpio_cmd;
- int err;
-
- /* prepare command */
- cmd.header = mc_encode_cmd_header(DPIO_CMDID_OPEN,
- cmd_flags,
- 0);
- dpio_cmd = (struct dpio_cmd_open *)cmd.params;
- dpio_cmd->dpio_id = cpu_to_le32(dpio_id);
-
- err = mc_send_command(mc_io, &cmd);
- if (err)
- return err;
-
- /* retrieve response parameters */
- *token = mc_cmd_hdr_read_token(&cmd);
-
- return 0;
-}
-
-/**
- * dpio_close() - Close the control session of the object
- * @mc_io: Pointer to MC portal's I/O object
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @token: Token of DPIO object
- *
- * Return: '0' on Success; Error code otherwise.
- */
-int dpio_close(struct fsl_mc_io *mc_io,
- u32 cmd_flags,
- u16 token)
-{
- struct mc_command cmd = { 0 };
-
- /* prepare command */
- cmd.header = mc_encode_cmd_header(DPIO_CMDID_CLOSE,
- cmd_flags,
- token);
-
- return mc_send_command(mc_io, &cmd);
-}
-
-/**
- * dpio_enable() - Enable the DPIO, allow I/O portal operations.
- * @mc_io: Pointer to MC portal's I/O object
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @token: Token of DPIO object
- *
- * Return: '0' on Success; Error code otherwise
- */
-int dpio_enable(struct fsl_mc_io *mc_io,
- u32 cmd_flags,
- u16 token)
-{
- struct mc_command cmd = { 0 };
-
- /* prepare command */
- cmd.header = mc_encode_cmd_header(DPIO_CMDID_ENABLE,
- cmd_flags,
- token);
-
- return mc_send_command(mc_io, &cmd);
-}
-
-/**
- * dpio_disable() - Disable the DPIO, stop any I/O portal operation.
- * @mc_io: Pointer to MC portal's I/O object
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @token: Token of DPIO object
- *
- * Return: '0' on Success; Error code otherwise
- */
-int dpio_disable(struct fsl_mc_io *mc_io,
- u32 cmd_flags,
- u16 token)
-{
- struct mc_command cmd = { 0 };
-
- /* prepare command */
- cmd.header = mc_encode_cmd_header(DPIO_CMDID_DISABLE,
- cmd_flags,
- token);
-
- return mc_send_command(mc_io, &cmd);
-}
-
-/**
- * dpio_get_attributes() - Retrieve DPIO attributes
- * @mc_io: Pointer to MC portal's I/O object
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @token: Token of DPIO object
- * @attr: Returned object's attributes
- *
- * Return: '0' on Success; Error code otherwise
- */
-int dpio_get_attributes(struct fsl_mc_io *mc_io,
- u32 cmd_flags,
- u16 token,
- struct dpio_attr *attr)
-{
- struct mc_command cmd = { 0 };
- struct dpio_rsp_get_attr *dpio_rsp;
- int err;
-
- /* prepare command */
- cmd.header = mc_encode_cmd_header(DPIO_CMDID_GET_ATTR,
- cmd_flags,
- token);
-
- err = mc_send_command(mc_io, &cmd);
- if (err)
- return err;
-
- /* retrieve response parameters */
- dpio_rsp = (struct dpio_rsp_get_attr *)cmd.params;
- attr->id = le32_to_cpu(dpio_rsp->id);
- attr->qbman_portal_id = le16_to_cpu(dpio_rsp->qbman_portal_id);
- attr->num_priorities = dpio_rsp->num_priorities;
- attr->channel_mode = dpio_rsp->channel_mode & DPIO_CHANNEL_MODE_MASK;
- attr->qbman_portal_ce_offset =
- le64_to_cpu(dpio_rsp->qbman_portal_ce_addr);
- attr->qbman_portal_ci_offset =
- le64_to_cpu(dpio_rsp->qbman_portal_ci_addr);
- attr->qbman_version = le32_to_cpu(dpio_rsp->qbman_version);
-
- return 0;
-}
-
-/**
- * dpio_get_api_version - Get Data Path I/O API version
- * @mc_io: Pointer to MC portal's DPIO object
- * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
- * @major_ver: Major version of DPIO API
- * @minor_ver: Minor version of DPIO API
- *
- * Return: '0' on Success; Error code otherwise
- */
-int dpio_get_api_version(struct fsl_mc_io *mc_io,
- u32 cmd_flags,
- u16 *major_ver,
- u16 *minor_ver)
-{
- struct mc_command cmd = { 0 };
- int err;
-
- /* prepare command */
- cmd.header = mc_encode_cmd_header(DPIO_CMDID_GET_API_VERSION,
- cmd_flags, 0);
-
- err = mc_send_command(mc_io, &cmd);
- if (err)
- return err;
-
- /* retrieve response parameters */
- mc_cmd_read_api_version(&cmd, major_ver, minor_ver);
-
- return 0;
-}
diff --git a/drivers/staging/fsl-mc/bus/dpio/dpio.h b/drivers/staging/fsl-mc/bus/dpio/dpio.h
deleted file mode 100644
index 49194c8..0000000
--- a/drivers/staging/fsl-mc/bus/dpio/dpio.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
-/*
- * Copyright 2013-2016 Freescale Semiconductor Inc.
- * Copyright 2016 NXP
- *
- */
-#ifndef __FSL_DPIO_H
-#define __FSL_DPIO_H
-
-struct fsl_mc_io;
-
-int dpio_open(struct fsl_mc_io *mc_io,
- u32 cmd_flags,
- int dpio_id,
- u16 *token);
-
-int dpio_close(struct fsl_mc_io *mc_io,
- u32 cmd_flags,
- u16 token);
-
-/**
- * enum dpio_channel_mode - DPIO notification channel mode
- * @DPIO_NO_CHANNEL: No support for notification channel
- * @DPIO_LOCAL_CHANNEL: Notifications on data availability can be received by a
- * dedicated channel in the DPIO; user should point the queue's
- * destination in the relevant interface to this DPIO
- */
-enum dpio_channel_mode {
- DPIO_NO_CHANNEL = 0,
- DPIO_LOCAL_CHANNEL = 1,
-};
-
-/**
- * struct dpio_cfg - Structure representing DPIO configuration
- * @channel_mode: Notification channel mode
- * @num_priorities: Number of priorities for the notification channel (1-8);
- * relevant only if 'channel_mode = DPIO_LOCAL_CHANNEL'
- */
-struct dpio_cfg {
- enum dpio_channel_mode channel_mode;
- u8 num_priorities;
-};
-
-int dpio_enable(struct fsl_mc_io *mc_io,
- u32 cmd_flags,
- u16 token);
-
-int dpio_disable(struct fsl_mc_io *mc_io,
- u32 cmd_flags,
- u16 token);
-
-/**
- * struct dpio_attr - Structure representing DPIO attributes
- * @id: DPIO object ID
- * @qbman_portal_ce_offset: offset of the software portal cache-enabled area
- * @qbman_portal_ci_offset: offset of the software portal cache-inhibited area
- * @qbman_portal_id: Software portal ID
- * @channel_mode: Notification channel mode
- * @num_priorities: Number of priorities for the notification channel (1-8);
- * relevant only if 'channel_mode = DPIO_LOCAL_CHANNEL'
- * @qbman_version: QBMAN version
- */
-struct dpio_attr {
- int id;
- u64 qbman_portal_ce_offset;
- u64 qbman_portal_ci_offset;
- u16 qbman_portal_id;
- enum dpio_channel_mode channel_mode;
- u8 num_priorities;
- u32 qbman_version;
-};
-
-int dpio_get_attributes(struct fsl_mc_io *mc_io,
- u32 cmd_flags,
- u16 token,
- struct dpio_attr *attr);
-
-int dpio_get_api_version(struct fsl_mc_io *mc_io,
- u32 cmd_flags,
- u16 *major_ver,
- u16 *minor_ver);
-
-#endif /* __FSL_DPIO_H */
diff --git a/drivers/staging/fsl-mc/bus/dpio/qbman-portal.c b/drivers/staging/fsl-mc/bus/dpio/qbman-portal.c
deleted file mode 100644
index 116fafb..0000000
--- a/drivers/staging/fsl-mc/bus/dpio/qbman-portal.c
+++ /dev/null
@@ -1,1005 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) 2014-2016 Freescale Semiconductor, Inc.
- * Copyright 2016 NXP
- *
- */
-
-#include <asm/cacheflush.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include "../../include/dpaa2-global.h"
-
-#include "qbman-portal.h"
-
-#define QMAN_REV_4000 0x04000000
-#define QMAN_REV_4100 0x04010000
-#define QMAN_REV_4101 0x04010001
-#define QMAN_REV_MASK 0xffff0000
-
-/* All QBMan command and result structures use this "valid bit" encoding */
-#define QB_VALID_BIT ((u32)0x80)
-
-/* QBMan portal management command codes */
-#define QBMAN_MC_ACQUIRE 0x30
-#define QBMAN_WQCHAN_CONFIGURE 0x46
-
-/* CINH register offsets */
-#define QBMAN_CINH_SWP_EQAR 0x8c0
-#define QBMAN_CINH_SWP_DQPI 0xa00
-#define QBMAN_CINH_SWP_DCAP 0xac0
-#define QBMAN_CINH_SWP_SDQCR 0xb00
-#define QBMAN_CINH_SWP_RAR 0xcc0
-#define QBMAN_CINH_SWP_ISR 0xe00
-#define QBMAN_CINH_SWP_IER 0xe40
-#define QBMAN_CINH_SWP_ISDR 0xe80
-#define QBMAN_CINH_SWP_IIR 0xec0
-
-/* CENA register offsets */
-#define QBMAN_CENA_SWP_EQCR(n) (0x000 + ((u32)(n) << 6))
-#define QBMAN_CENA_SWP_DQRR(n) (0x200 + ((u32)(n) << 6))
-#define QBMAN_CENA_SWP_RCR(n) (0x400 + ((u32)(n) << 6))
-#define QBMAN_CENA_SWP_CR 0x600
-#define QBMAN_CENA_SWP_RR(vb) (0x700 + ((u32)(vb) >> 1))
-#define QBMAN_CENA_SWP_VDQCR 0x780
-
-/* Reverse mapping of QBMAN_CENA_SWP_DQRR() */
-#define QBMAN_IDX_FROM_DQRR(p) (((unsigned long)(p) & 0x1ff) >> 6)
-
-/* Define token used to determine if response written to memory is valid */
-#define QMAN_DQ_TOKEN_VALID 1
-
-/* SDQCR attribute codes */
-#define QB_SDQCR_FC_SHIFT 29
-#define QB_SDQCR_FC_MASK 0x1
-#define QB_SDQCR_DCT_SHIFT 24
-#define QB_SDQCR_DCT_MASK 0x3
-#define QB_SDQCR_TOK_SHIFT 16
-#define QB_SDQCR_TOK_MASK 0xff
-#define QB_SDQCR_SRC_SHIFT 0
-#define QB_SDQCR_SRC_MASK 0xffff
-
-/* opaque token for static dequeues */
-#define QMAN_SDQCR_TOKEN 0xbb
-
-enum qbman_sdqcr_dct {
- qbman_sdqcr_dct_null = 0,
- qbman_sdqcr_dct_prio_ics,
- qbman_sdqcr_dct_active_ics,
- qbman_sdqcr_dct_active
-};
-
-enum qbman_sdqcr_fc {
- qbman_sdqcr_fc_one = 0,
- qbman_sdqcr_fc_up_to_3 = 1
-};
-
-/* Portal Access */
-
-static inline u32 qbman_read_register(struct qbman_swp *p, u32 offset)
-{
- return readl_relaxed(p->addr_cinh + offset);
-}
-
-static inline void qbman_write_register(struct qbman_swp *p, u32 offset,
- u32 value)
-{
- writel_relaxed(value, p->addr_cinh + offset);
-}
-
-static inline void *qbman_get_cmd(struct qbman_swp *p, u32 offset)
-{
- return p->addr_cena + offset;
-}
-
-#define QBMAN_CINH_SWP_CFG 0xd00
-
-#define SWP_CFG_DQRR_MF_SHIFT 20
-#define SWP_CFG_EST_SHIFT 16
-#define SWP_CFG_WN_SHIFT 14
-#define SWP_CFG_RPM_SHIFT 12
-#define SWP_CFG_DCM_SHIFT 10
-#define SWP_CFG_EPM_SHIFT 8
-#define SWP_CFG_SD_SHIFT 5
-#define SWP_CFG_SP_SHIFT 4
-#define SWP_CFG_SE_SHIFT 3
-#define SWP_CFG_DP_SHIFT 2
-#define SWP_CFG_DE_SHIFT 1
-#define SWP_CFG_EP_SHIFT 0
-
-static inline u32 qbman_set_swp_cfg(u8 max_fill, u8 wn, u8 est, u8 rpm, u8 dcm,
- u8 epm, int sd, int sp, int se,
- int dp, int de, int ep)
-{
- return (max_fill << SWP_CFG_DQRR_MF_SHIFT |
- est << SWP_CFG_EST_SHIFT |
- wn << SWP_CFG_WN_SHIFT |
- rpm << SWP_CFG_RPM_SHIFT |
- dcm << SWP_CFG_DCM_SHIFT |
- epm << SWP_CFG_EPM_SHIFT |
- sd << SWP_CFG_SD_SHIFT |
- sp << SWP_CFG_SP_SHIFT |
- se << SWP_CFG_SE_SHIFT |
- dp << SWP_CFG_DP_SHIFT |
- de << SWP_CFG_DE_SHIFT |
- ep << SWP_CFG_EP_SHIFT);
-}
-
-/**
- * qbman_swp_init() - Create a functional object representing the given
- * QBMan portal descriptor.
- * @d: the given qbman swp descriptor
- *
- * Return qbman_swp portal for success, NULL if the object cannot
- * be created.
- */
-struct qbman_swp *qbman_swp_init(const struct qbman_swp_desc *d)
-{
- struct qbman_swp *p = kmalloc(sizeof(*p), GFP_KERNEL);
- u32 reg;
-
- if (!p)
- return NULL;
- p->desc = d;
- p->mc.valid_bit = QB_VALID_BIT;
- p->sdq = 0;
- p->sdq |= qbman_sdqcr_dct_prio_ics << QB_SDQCR_DCT_SHIFT;
- p->sdq |= qbman_sdqcr_fc_up_to_3 << QB_SDQCR_FC_SHIFT;
- p->sdq |= QMAN_SDQCR_TOKEN << QB_SDQCR_TOK_SHIFT;
-
- atomic_set(&p->vdq.available, 1);
- p->vdq.valid_bit = QB_VALID_BIT;
- p->dqrr.next_idx = 0;
- p->dqrr.valid_bit = QB_VALID_BIT;
-
- if ((p->desc->qman_version & QMAN_REV_MASK) < QMAN_REV_4100) {
- p->dqrr.dqrr_size = 4;
- p->dqrr.reset_bug = 1;
- } else {
- p->dqrr.dqrr_size = 8;
- p->dqrr.reset_bug = 0;
- }
-
- p->addr_cena = d->cena_bar;
- p->addr_cinh = d->cinh_bar;
-
- reg = qbman_set_swp_cfg(p->dqrr.dqrr_size,
- 1, /* Writes Non-cacheable */
- 0, /* EQCR_CI stashing threshold */
- 3, /* RPM: Valid bit mode, RCR in array mode */
- 2, /* DCM: Discrete consumption ack mode */
- 3, /* EPM: Valid bit mode, EQCR in array mode */
- 0, /* mem stashing drop enable == FALSE */
- 1, /* mem stashing priority == TRUE */
- 0, /* mem stashing enable == FALSE */
- 1, /* dequeue stashing priority == TRUE */
- 0, /* dequeue stashing enable == FALSE */
- 0); /* EQCR_CI stashing priority == FALSE */
-
- qbman_write_register(p, QBMAN_CINH_SWP_CFG, reg);
- reg = qbman_read_register(p, QBMAN_CINH_SWP_CFG);
- if (!reg) {
- pr_err("qbman: the portal is not enabled!\n");
- return NULL;
- }
-
- /*
- * SDQCR needs to be initialized to 0 when no channels are
- * being dequeued from or else the QMan HW will indicate an
- * error. The values that were calculated above will be
- * applied when dequeues from a specific channel are enabled.
- */
- qbman_write_register(p, QBMAN_CINH_SWP_SDQCR, 0);
- return p;
-}
-
-/**
- * qbman_swp_finish() - Create and destroy a functional object representing
- * the given QBMan portal descriptor.
- * @p: the qbman_swp object to be destroyed
- */
-void qbman_swp_finish(struct qbman_swp *p)
-{
- kfree(p);
-}
-
-/**
- * qbman_swp_interrupt_read_status()
- * @p: the given software portal
- *
- * Return the value in the SWP_ISR register.
- */
-u32 qbman_swp_interrupt_read_status(struct qbman_swp *p)
-{
- return qbman_read_register(p, QBMAN_CINH_SWP_ISR);
-}
-
-/**
- * qbman_swp_interrupt_clear_status()
- * @p: the given software portal
- * @mask: The mask to clear in SWP_ISR register
- */
-void qbman_swp_interrupt_clear_status(struct qbman_swp *p, u32 mask)
-{
- qbman_write_register(p, QBMAN_CINH_SWP_ISR, mask);
-}
-
-/**
- * qbman_swp_interrupt_get_trigger() - read interrupt enable register
- * @p: the given software portal
- *
- * Return the value in the SWP_IER register.
- */
-u32 qbman_swp_interrupt_get_trigger(struct qbman_swp *p)
-{
- return qbman_read_register(p, QBMAN_CINH_SWP_IER);
-}
-
-/**
- * qbman_swp_interrupt_set_trigger() - enable interrupts for a swp
- * @p: the given software portal
- * @mask: The mask of bits to enable in SWP_IER
- */
-void qbman_swp_interrupt_set_trigger(struct qbman_swp *p, u32 mask)
-{
- qbman_write_register(p, QBMAN_CINH_SWP_IER, mask);
-}
-
-/**
- * qbman_swp_interrupt_get_inhibit() - read interrupt mask register
- * @p: the given software portal object
- *
- * Return the value in the SWP_IIR register.
- */
-int qbman_swp_interrupt_get_inhibit(struct qbman_swp *p)
-{
- return qbman_read_register(p, QBMAN_CINH_SWP_IIR);
-}
-
-/**
- * qbman_swp_interrupt_set_inhibit() - write interrupt mask register
- * @p: the given software portal object
- * @mask: The mask to set in SWP_IIR register
- */
-void qbman_swp_interrupt_set_inhibit(struct qbman_swp *p, int inhibit)
-{
- qbman_write_register(p, QBMAN_CINH_SWP_IIR, inhibit ? 0xffffffff : 0);
-}
-
-/*
- * Different management commands all use this common base layer of code to issue
- * commands and poll for results.
- */
-
-/*
- * Returns a pointer to where the caller should fill in their management command
- * (caller should ignore the verb byte)
- */
-void *qbman_swp_mc_start(struct qbman_swp *p)
-{
- return qbman_get_cmd(p, QBMAN_CENA_SWP_CR);
-}
-
-/*
- * Commits merges in the caller-supplied command verb (which should not include
- * the valid-bit) and submits the command to hardware
- */
-void qbman_swp_mc_submit(struct qbman_swp *p, void *cmd, u8 cmd_verb)
-{
- u8 *v = cmd;
-
- dma_wmb();
- *v = cmd_verb | p->mc.valid_bit;
-}
-
-/*
- * Checks for a completed response (returns non-NULL if only if the response
- * is complete).
- */
-void *qbman_swp_mc_result(struct qbman_swp *p)
-{
- u32 *ret, verb;
-
- ret = qbman_get_cmd(p, QBMAN_CENA_SWP_RR(p->mc.valid_bit));
-
- /* Remove the valid-bit - command completed if the rest is non-zero */
- verb = ret[0] & ~QB_VALID_BIT;
- if (!verb)
- return NULL;
- p->mc.valid_bit ^= QB_VALID_BIT;
- return ret;
-}
-
-#define QB_ENQUEUE_CMD_OPTIONS_SHIFT 0
-enum qb_enqueue_commands {
- enqueue_empty = 0,
- enqueue_response_always = 1,
- enqueue_rejects_to_fq = 2
-};
-
-#define QB_ENQUEUE_CMD_ORP_ENABLE_SHIFT 2
-#define QB_ENQUEUE_CMD_IRQ_ON_DISPATCH_SHIFT 3
-#define QB_ENQUEUE_CMD_TARGET_TYPE_SHIFT 4
-
-/**
- * qbman_eq_desc_clear() - Clear the contents of a descriptor to
- * default/starting state.
- */
-void qbman_eq_desc_clear(struct qbman_eq_desc *d)
-{
- memset(d, 0, sizeof(*d));
-}
-
-/**
- * qbman_eq_desc_set_no_orp() - Set enqueue descriptor without orp
- * @d: the enqueue descriptor.
- * @response_success: 1 = enqueue with response always; 0 = enqueue with
- * rejections returned on a FQ.
- */
-void qbman_eq_desc_set_no_orp(struct qbman_eq_desc *d, int respond_success)
-{
- d->verb &= ~(1 << QB_ENQUEUE_CMD_ORP_ENABLE_SHIFT);
- if (respond_success)
- d->verb |= enqueue_response_always;
- else
- d->verb |= enqueue_rejects_to_fq;
-}
-
-/*
- * Exactly one of the following descriptor "targets" should be set. (Calling any
- * one of these will replace the effect of any prior call to one of these.)
- * -enqueue to a frame queue
- * -enqueue to a queuing destination
- */
-
-/**
- * qbman_eq_desc_set_fq() - set the FQ for the enqueue command
- * @d: the enqueue descriptor
- * @fqid: the id of the frame queue to be enqueued
- */
-void qbman_eq_desc_set_fq(struct qbman_eq_desc *d, u32 fqid)
-{
- d->verb &= ~(1 << QB_ENQUEUE_CMD_TARGET_TYPE_SHIFT);
- d->tgtid = cpu_to_le32(fqid);
-}
-
-/**
- * qbman_eq_desc_set_qd() - Set Queuing Destination for the enqueue command
- * @d: the enqueue descriptor
- * @qdid: the id of the queuing destination to be enqueued
- * @qd_bin: the queuing destination bin
- * @qd_prio: the queuing destination priority
- */
-void qbman_eq_desc_set_qd(struct qbman_eq_desc *d, u32 qdid,
- u32 qd_bin, u32 qd_prio)
-{
- d->verb |= 1 << QB_ENQUEUE_CMD_TARGET_TYPE_SHIFT;
- d->tgtid = cpu_to_le32(qdid);
- d->qdbin = cpu_to_le16(qd_bin);
- d->qpri = qd_prio;
-}
-
-#define EQAR_IDX(eqar) ((eqar) & 0x7)
-#define EQAR_VB(eqar) ((eqar) & 0x80)
-#define EQAR_SUCCESS(eqar) ((eqar) & 0x100)
-
-/**
- * qbman_swp_enqueue() - Issue an enqueue command
- * @s: the software portal used for enqueue
- * @d: the enqueue descriptor
- * @fd: the frame descriptor to be enqueued
- *
- * Please note that 'fd' should only be NULL if the "action" of the
- * descriptor is "orp_hole" or "orp_nesn".
- *
- * Return 0 for successful enqueue, -EBUSY if the EQCR is not ready.
- */
-int qbman_swp_enqueue(struct qbman_swp *s, const struct qbman_eq_desc *d,
- const struct dpaa2_fd *fd)
-{
- struct qbman_eq_desc *p;
- u32 eqar = qbman_read_register(s, QBMAN_CINH_SWP_EQAR);
-
- if (!EQAR_SUCCESS(eqar))
- return -EBUSY;
-
- p = qbman_get_cmd(s, QBMAN_CENA_SWP_EQCR(EQAR_IDX(eqar)));
- memcpy(&p->dca, &d->dca, 31);
- memcpy(&p->fd, fd, sizeof(*fd));
-
- /* Set the verb byte, have to substitute in the valid-bit */
- dma_wmb();
- p->verb = d->verb | EQAR_VB(eqar);
-
- return 0;
-}
-
-/* Static (push) dequeue */
-
-/**
- * qbman_swp_push_get() - Get the push dequeue setup
- * @p: the software portal object
- * @channel_idx: the channel index to query
- * @enabled: returned boolean to show whether the push dequeue is enabled
- * for the given channel
- */
-void qbman_swp_push_get(struct qbman_swp *s, u8 channel_idx, int *enabled)
-{
- u16 src = (s->sdq >> QB_SDQCR_SRC_SHIFT) & QB_SDQCR_SRC_MASK;
-
- WARN_ON(channel_idx > 15);
- *enabled = src | (1 << channel_idx);
-}
-
-/**
- * qbman_swp_push_set() - Enable or disable push dequeue
- * @p: the software portal object
- * @channel_idx: the channel index (0 to 15)
- * @enable: enable or disable push dequeue
- */
-void qbman_swp_push_set(struct qbman_swp *s, u8 channel_idx, int enable)
-{
- u16 dqsrc;
-
- WARN_ON(channel_idx > 15);
- if (enable)
- s->sdq |= 1 << channel_idx;
- else
- s->sdq &= ~(1 << channel_idx);
-
- /* Read make the complete src map. If no channels are enabled
- * the SDQCR must be 0 or else QMan will assert errors
- */
- dqsrc = (s->sdq >> QB_SDQCR_SRC_SHIFT) & QB_SDQCR_SRC_MASK;
- if (dqsrc != 0)
- qbman_write_register(s, QBMAN_CINH_SWP_SDQCR, s->sdq);
- else
- qbman_write_register(s, QBMAN_CINH_SWP_SDQCR, 0);
-}
-
-#define QB_VDQCR_VERB_DCT_SHIFT 0
-#define QB_VDQCR_VERB_DT_SHIFT 2
-#define QB_VDQCR_VERB_RLS_SHIFT 4
-#define QB_VDQCR_VERB_WAE_SHIFT 5
-
-enum qb_pull_dt_e {
- qb_pull_dt_channel,
- qb_pull_dt_workqueue,
- qb_pull_dt_framequeue
-};
-
-/**
- * qbman_pull_desc_clear() - Clear the contents of a descriptor to
- * default/starting state
- * @d: the pull dequeue descriptor to be cleared
- */
-void qbman_pull_desc_clear(struct qbman_pull_desc *d)
-{
- memset(d, 0, sizeof(*d));
-}
-
-/**
- * qbman_pull_desc_set_storage()- Set the pull dequeue storage
- * @d: the pull dequeue descriptor to be set
- * @storage: the pointer of the memory to store the dequeue result
- * @storage_phys: the physical address of the storage memory
- * @stash: to indicate whether write allocate is enabled
- *
- * If not called, or if called with 'storage' as NULL, the result pull dequeues
- * will produce results to DQRR. If 'storage' is non-NULL, then results are
- * produced to the given memory location (using the DMA address which
- * the caller provides in 'storage_phys'), and 'stash' controls whether or not
- * those writes to main-memory express a cache-warming attribute.
- */
-void qbman_pull_desc_set_storage(struct qbman_pull_desc *d,
- struct dpaa2_dq *storage,
- dma_addr_t storage_phys,
- int stash)
-{
- /* save the virtual address */
- d->rsp_addr_virt = (u64)(uintptr_t)storage;
-
- if (!storage) {
- d->verb &= ~(1 << QB_VDQCR_VERB_RLS_SHIFT);
- return;
- }
- d->verb |= 1 << QB_VDQCR_VERB_RLS_SHIFT;
- if (stash)
- d->verb |= 1 << QB_VDQCR_VERB_WAE_SHIFT;
- else
- d->verb &= ~(1 << QB_VDQCR_VERB_WAE_SHIFT);
-
- d->rsp_addr = cpu_to_le64(storage_phys);
-}
-
-/**
- * qbman_pull_desc_set_numframes() - Set the number of frames to be dequeued
- * @d: the pull dequeue descriptor to be set
- * @numframes: number of frames to be set, must be between 1 and 16, inclusive
- */
-void qbman_pull_desc_set_numframes(struct qbman_pull_desc *d, u8 numframes)
-{
- d->numf = numframes - 1;
-}
-
-/*
- * Exactly one of the following descriptor "actions" should be set. (Calling any
- * one of these will replace the effect of any prior call to one of these.)
- * - pull dequeue from the given frame queue (FQ)
- * - pull dequeue from any FQ in the given work queue (WQ)
- * - pull dequeue from any FQ in any WQ in the given channel
- */
-
-/**
- * qbman_pull_desc_set_fq() - Set fqid from which the dequeue command dequeues
- * @fqid: the frame queue index of the given FQ
- */
-void qbman_pull_desc_set_fq(struct qbman_pull_desc *d, u32 fqid)
-{
- d->verb |= 1 << QB_VDQCR_VERB_DCT_SHIFT;
- d->verb |= qb_pull_dt_framequeue << QB_VDQCR_VERB_DT_SHIFT;
- d->dq_src = cpu_to_le32(fqid);
-}
-
-/**
- * qbman_pull_desc_set_wq() - Set wqid from which the dequeue command dequeues
- * @wqid: composed of channel id and wqid within the channel
- * @dct: the dequeue command type
- */
-void qbman_pull_desc_set_wq(struct qbman_pull_desc *d, u32 wqid,
- enum qbman_pull_type_e dct)
-{
- d->verb |= dct << QB_VDQCR_VERB_DCT_SHIFT;
- d->verb |= qb_pull_dt_workqueue << QB_VDQCR_VERB_DT_SHIFT;
- d->dq_src = cpu_to_le32(wqid);
-}
-
-/**
- * qbman_pull_desc_set_channel() - Set channelid from which the dequeue command
- * dequeues
- * @chid: the channel id to be dequeued
- * @dct: the dequeue command type
- */
-void qbman_pull_desc_set_channel(struct qbman_pull_desc *d, u32 chid,
- enum qbman_pull_type_e dct)
-{
- d->verb |= dct << QB_VDQCR_VERB_DCT_SHIFT;
- d->verb |= qb_pull_dt_channel << QB_VDQCR_VERB_DT_SHIFT;
- d->dq_src = cpu_to_le32(chid);
-}
-
-/**
- * qbman_swp_pull() - Issue the pull dequeue command
- * @s: the software portal object
- * @d: the software portal descriptor which has been configured with
- * the set of qbman_pull_desc_set_*() calls
- *
- * Return 0 for success, and -EBUSY if the software portal is not ready
- * to do pull dequeue.
- */
-int qbman_swp_pull(struct qbman_swp *s, struct qbman_pull_desc *d)
-{
- struct qbman_pull_desc *p;
-
- if (!atomic_dec_and_test(&s->vdq.available)) {
- atomic_inc(&s->vdq.available);
- return -EBUSY;
- }
- s->vdq.storage = (void *)(uintptr_t)d->rsp_addr_virt;
- p = qbman_get_cmd(s, QBMAN_CENA_SWP_VDQCR);
- p->numf = d->numf;
- p->tok = QMAN_DQ_TOKEN_VALID;
- p->dq_src = d->dq_src;
- p->rsp_addr = d->rsp_addr;
- p->rsp_addr_virt = d->rsp_addr_virt;
- dma_wmb();
-
- /* Set the verb byte, have to substitute in the valid-bit */
- p->verb = d->verb | s->vdq.valid_bit;
- s->vdq.valid_bit ^= QB_VALID_BIT;
-
- return 0;
-}
-
-#define QMAN_DQRR_PI_MASK 0xf
-
-/**
- * qbman_swp_dqrr_next() - Get an valid DQRR entry
- * @s: the software portal object
- *
- * Return NULL if there are no unconsumed DQRR entries. Return a DQRR entry
- * only once, so repeated calls can return a sequence of DQRR entries, without
- * requiring they be consumed immediately or in any particular order.
- */
-const struct dpaa2_dq *qbman_swp_dqrr_next(struct qbman_swp *s)
-{
- u32 verb;
- u32 response_verb;
- u32 flags;
- struct dpaa2_dq *p;
-
- /* Before using valid-bit to detect if something is there, we have to
- * handle the case of the DQRR reset bug...
- */
- if (unlikely(s->dqrr.reset_bug)) {
- /*
- * We pick up new entries by cache-inhibited producer index,
- * which means that a non-coherent mapping would require us to
- * invalidate and read *only* once that PI has indicated that
- * there's an entry here. The first trip around the DQRR ring
- * will be much less efficient than all subsequent trips around
- * it...
- */
- u8 pi = qbman_read_register(s, QBMAN_CINH_SWP_DQPI) &
- QMAN_DQRR_PI_MASK;
-
- /* there are new entries if pi != next_idx */
- if (pi == s->dqrr.next_idx)
- return NULL;
-
- /*
- * if next_idx is/was the last ring index, and 'pi' is
- * different, we can disable the workaround as all the ring
- * entries have now been DMA'd to so valid-bit checking is
- * repaired. Note: this logic needs to be based on next_idx
- * (which increments one at a time), rather than on pi (which
- * can burst and wrap-around between our snapshots of it).
- */
- if (s->dqrr.next_idx == (s->dqrr.dqrr_size - 1)) {
- pr_debug("next_idx=%d, pi=%d, clear reset bug\n",
- s->dqrr.next_idx, pi);
- s->dqrr.reset_bug = 0;
- }
- prefetch(qbman_get_cmd(s,
- QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx)));
- }
-
- p = qbman_get_cmd(s, QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx));
- verb = p->dq.verb;
-
- /*
- * If the valid-bit isn't of the expected polarity, nothing there. Note,
- * in the DQRR reset bug workaround, we shouldn't need to skip these
- * check, because we've already determined that a new entry is available
- * and we've invalidated the cacheline before reading it, so the
- * valid-bit behaviour is repaired and should tell us what we already
- * knew from reading PI.
- */
- if ((verb & QB_VALID_BIT) != s->dqrr.valid_bit) {
- prefetch(qbman_get_cmd(s,
- QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx)));
- return NULL;
- }
- /*
- * There's something there. Move "next_idx" attention to the next ring
- * entry (and prefetch it) before returning what we found.
- */
- s->dqrr.next_idx++;
- s->dqrr.next_idx &= s->dqrr.dqrr_size - 1; /* Wrap around */
- if (!s->dqrr.next_idx)
- s->dqrr.valid_bit ^= QB_VALID_BIT;
-
- /*
- * If this is the final response to a volatile dequeue command
- * indicate that the vdq is available
- */
- flags = p->dq.stat;
- response_verb = verb & QBMAN_RESULT_MASK;
- if ((response_verb == QBMAN_RESULT_DQ) &&
- (flags & DPAA2_DQ_STAT_VOLATILE) &&
- (flags & DPAA2_DQ_STAT_EXPIRED))
- atomic_inc(&s->vdq.available);
-
- prefetch(qbman_get_cmd(s, QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx)));
-
- return p;
-}
-
-/**
- * qbman_swp_dqrr_consume() - Consume DQRR entries previously returned from
- * qbman_swp_dqrr_next().
- * @s: the software portal object
- * @dq: the DQRR entry to be consumed
- */
-void qbman_swp_dqrr_consume(struct qbman_swp *s, const struct dpaa2_dq *dq)
-{
- qbman_write_register(s, QBMAN_CINH_SWP_DCAP, QBMAN_IDX_FROM_DQRR(dq));
-}
-
-/**
- * qbman_result_has_new_result() - Check and get the dequeue response from the
- * dq storage memory set in pull dequeue command
- * @s: the software portal object
- * @dq: the dequeue result read from the memory
- *
- * Return 1 for getting a valid dequeue result, or 0 for not getting a valid
- * dequeue result.
- *
- * Only used for user-provided storage of dequeue results, not DQRR. For
- * efficiency purposes, the driver will perform any required endianness
- * conversion to ensure that the user's dequeue result storage is in host-endian
- * format. As such, once the user has called qbman_result_has_new_result() and
- * been returned a valid dequeue result, they should not call it again on
- * the same memory location (except of course if another dequeue command has
- * been executed to produce a new result to that location).
- */
-int qbman_result_has_new_result(struct qbman_swp *s, const struct dpaa2_dq *dq)
-{
- if (dq->dq.tok != QMAN_DQ_TOKEN_VALID)
- return 0;
-
- /*
- * Set token to be 0 so we will detect change back to 1
- * next time the looping is traversed. Const is cast away here
- * as we want users to treat the dequeue responses as read only.
- */
- ((struct dpaa2_dq *)dq)->dq.tok = 0;
-
- /*
- * Determine whether VDQCR is available based on whether the
- * current result is sitting in the first storage location of
- * the busy command.
- */
- if (s->vdq.storage == dq) {
- s->vdq.storage = NULL;
- atomic_inc(&s->vdq.available);
- }
-
- return 1;
-}
-
-/**
- * qbman_release_desc_clear() - Clear the contents of a descriptor to
- * default/starting state.
- */
-void qbman_release_desc_clear(struct qbman_release_desc *d)
-{
- memset(d, 0, sizeof(*d));
- d->verb = 1 << 5; /* Release Command Valid */
-}
-
-/**
- * qbman_release_desc_set_bpid() - Set the ID of the buffer pool to release to
- */
-void qbman_release_desc_set_bpid(struct qbman_release_desc *d, u16 bpid)
-{
- d->bpid = cpu_to_le16(bpid);
-}
-
-/**
- * qbman_release_desc_set_rcdi() - Determines whether or not the portal's RCDI
- * interrupt source should be asserted after the release command is completed.
- */
-void qbman_release_desc_set_rcdi(struct qbman_release_desc *d, int enable)
-{
- if (enable)
- d->verb |= 1 << 6;
- else
- d->verb &= ~(1 << 6);
-}
-
-#define RAR_IDX(rar) ((rar) & 0x7)
-#define RAR_VB(rar) ((rar) & 0x80)
-#define RAR_SUCCESS(rar) ((rar) & 0x100)
-
-/**
- * qbman_swp_release() - Issue a buffer release command
- * @s: the software portal object
- * @d: the release descriptor
- * @buffers: a pointer pointing to the buffer address to be released
- * @num_buffers: number of buffers to be released, must be less than 8
- *
- * Return 0 for success, -EBUSY if the release command ring is not ready.
- */
-int qbman_swp_release(struct qbman_swp *s, const struct qbman_release_desc *d,
- const u64 *buffers, unsigned int num_buffers)
-{
- int i;
- struct qbman_release_desc *p;
- u32 rar;
-
- if (!num_buffers || (num_buffers > 7))
- return -EINVAL;
-
- rar = qbman_read_register(s, QBMAN_CINH_SWP_RAR);
- if (!RAR_SUCCESS(rar))
- return -EBUSY;
-
- /* Start the release command */
- p = qbman_get_cmd(s, QBMAN_CENA_SWP_RCR(RAR_IDX(rar)));
- /* Copy the caller's buffer pointers to the command */
- for (i = 0; i < num_buffers; i++)
- p->buf[i] = cpu_to_le64(buffers[i]);
- p->bpid = d->bpid;
-
- /*
- * Set the verb byte, have to substitute in the valid-bit and the number
- * of buffers.
- */
- dma_wmb();
- p->verb = d->verb | RAR_VB(rar) | num_buffers;
-
- return 0;
-}
-
-struct qbman_acquire_desc {
- u8 verb;
- u8 reserved;
- __le16 bpid;
- u8 num;
- u8 reserved2[59];
-};
-
-struct qbman_acquire_rslt {
- u8 verb;
- u8 rslt;
- __le16 reserved;
- u8 num;
- u8 reserved2[3];
- __le64 buf[7];
-};
-
-/**
- * qbman_swp_acquire() - Issue a buffer acquire command
- * @s: the software portal object
- * @bpid: the buffer pool index
- * @buffers: a pointer pointing to the acquired buffer addresses
- * @num_buffers: number of buffers to be acquired, must be less than 8
- *
- * Return 0 for success, or negative error code if the acquire command
- * fails.
- */
-int qbman_swp_acquire(struct qbman_swp *s, u16 bpid, u64 *buffers,
- unsigned int num_buffers)
-{
- struct qbman_acquire_desc *p;
- struct qbman_acquire_rslt *r;
- int i;
-
- if (!num_buffers || (num_buffers > 7))
- return -EINVAL;
-
- /* Start the management command */
- p = qbman_swp_mc_start(s);
-
- if (!p)
- return -EBUSY;
-
- /* Encode the caller-provided attributes */
- p->bpid = cpu_to_le16(bpid);
- p->num = num_buffers;
-
- /* Complete the management command */
- r = qbman_swp_mc_complete(s, p, QBMAN_MC_ACQUIRE);
- if (unlikely(!r)) {
- pr_err("qbman: acquire from BPID %d failed, no response\n",
- bpid);
- return -EIO;
- }
-
- /* Decode the outcome */
- WARN_ON((r->verb & 0x7f) != QBMAN_MC_ACQUIRE);
-
- /* Determine success or failure */
- if (unlikely(r->rslt != QBMAN_MC_RSLT_OK)) {
- pr_err("qbman: acquire from BPID 0x%x failed, code=0x%02x\n",
- bpid, r->rslt);
- return -EIO;
- }
-
- WARN_ON(r->num > num_buffers);
-
- /* Copy the acquired buffers to the caller's array */
- for (i = 0; i < r->num; i++)
- buffers[i] = le64_to_cpu(r->buf[i]);
-
- return (int)r->num;
-}
-
-struct qbman_alt_fq_state_desc {
- u8 verb;
- u8 reserved[3];
- __le32 fqid;
- u8 reserved2[56];
-};
-
-struct qbman_alt_fq_state_rslt {
- u8 verb;
- u8 rslt;
- u8 reserved[62];
-};
-
-#define ALT_FQ_FQID_MASK 0x00FFFFFF
-
-int qbman_swp_alt_fq_state(struct qbman_swp *s, u32 fqid,
- u8 alt_fq_verb)
-{
- struct qbman_alt_fq_state_desc *p;
- struct qbman_alt_fq_state_rslt *r;
-
- /* Start the management command */
- p = qbman_swp_mc_start(s);
- if (!p)
- return -EBUSY;
-
- p->fqid = cpu_to_le32(fqid & ALT_FQ_FQID_MASK);
-
- /* Complete the management command */
- r = qbman_swp_mc_complete(s, p, alt_fq_verb);
- if (unlikely(!r)) {
- pr_err("qbman: mgmt cmd failed, no response (verb=0x%x)\n",
- alt_fq_verb);
- return -EIO;
- }
-
- /* Decode the outcome */
- WARN_ON((r->verb & QBMAN_RESULT_MASK) != alt_fq_verb);
-
- /* Determine success or failure */
- if (unlikely(r->rslt != QBMAN_MC_RSLT_OK)) {
- pr_err("qbman: ALT FQID %d failed: verb = 0x%08x code = 0x%02x\n",
- fqid, r->verb, r->rslt);
- return -EIO;
- }
-
- return 0;
-}
-
-struct qbman_cdan_ctrl_desc {
- u8 verb;
- u8 reserved;
- __le16 ch;
- u8 we;
- u8 ctrl;
- __le16 reserved2;
- __le64 cdan_ctx;
- u8 reserved3[48];
-
-};
-
-struct qbman_cdan_ctrl_rslt {
- u8 verb;
- u8 rslt;
- __le16 ch;
- u8 reserved[60];
-};
-
-int qbman_swp_CDAN_set(struct qbman_swp *s, u16 channelid,
- u8 we_mask, u8 cdan_en,
- u64 ctx)
-{
- struct qbman_cdan_ctrl_desc *p = NULL;
- struct qbman_cdan_ctrl_rslt *r = NULL;
-
- /* Start the management command */
- p = qbman_swp_mc_start(s);
- if (!p)
- return -EBUSY;
-
- /* Encode the caller-provided attributes */
- p->ch = cpu_to_le16(channelid);
- p->we = we_mask;
- if (cdan_en)
- p->ctrl = 1;
- else
- p->ctrl = 0;
- p->cdan_ctx = cpu_to_le64(ctx);
-
- /* Complete the management command */
- r = qbman_swp_mc_complete(s, p, QBMAN_WQCHAN_CONFIGURE);
- if (unlikely(!r)) {
- pr_err("qbman: wqchan config failed, no response\n");
- return -EIO;
- }
-
- WARN_ON((r->verb & 0x7f) != QBMAN_WQCHAN_CONFIGURE);
-
- /* Determine success or failure */
- if (unlikely(r->rslt != QBMAN_MC_RSLT_OK)) {
- pr_err("qbman: CDAN cQID %d failed: code = 0x%02x\n",
- channelid, r->rslt);
- return -EIO;
- }
-
- return 0;
-}
diff --git a/drivers/staging/fsl-mc/bus/dpio/qbman-portal.h b/drivers/staging/fsl-mc/bus/dpio/qbman-portal.h
deleted file mode 100644
index 4488a44..0000000
--- a/drivers/staging/fsl-mc/bus/dpio/qbman-portal.h
+++ /dev/null
@@ -1,444 +0,0 @@
-/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
-/*
- * Copyright (C) 2014-2016 Freescale Semiconductor, Inc.
- * Copyright 2016 NXP
- *
- */
-#ifndef __FSL_QBMAN_PORTAL_H
-#define __FSL_QBMAN_PORTAL_H
-
-#include "../../include/dpaa2-fd.h"
-
-struct dpaa2_dq;
-struct qbman_swp;
-
-/* qbman software portal descriptor structure */
-struct qbman_swp_desc {
- void *cena_bar; /* Cache-enabled portal base address */
- void *cinh_bar; /* Cache-inhibited portal base address */
- u32 qman_version;
-};
-
-#define QBMAN_SWP_INTERRUPT_EQRI 0x01
-#define QBMAN_SWP_INTERRUPT_EQDI 0x02
-#define QBMAN_SWP_INTERRUPT_DQRI 0x04
-#define QBMAN_SWP_INTERRUPT_RCRI 0x08
-#define QBMAN_SWP_INTERRUPT_RCDI 0x10
-#define QBMAN_SWP_INTERRUPT_VDCI 0x20
-
-/* the structure for pull dequeue descriptor */
-struct qbman_pull_desc {
- u8 verb;
- u8 numf;
- u8 tok;
- u8 reserved;
- __le32 dq_src;
- __le64 rsp_addr;
- u64 rsp_addr_virt;
- u8 padding[40];
-};
-
-enum qbman_pull_type_e {
- /* dequeue with priority precedence, respect intra-class scheduling */
- qbman_pull_type_prio = 1,
- /* dequeue with active FQ precedence, respect ICS */
- qbman_pull_type_active,
- /* dequeue with active FQ precedence, no ICS */
- qbman_pull_type_active_noics
-};
-
-/* Definitions for parsing dequeue entries */
-#define QBMAN_RESULT_MASK 0x7f
-#define QBMAN_RESULT_DQ 0x60
-#define QBMAN_RESULT_FQRN 0x21
-#define QBMAN_RESULT_FQRNI 0x22
-#define QBMAN_RESULT_FQPN 0x24
-#define QBMAN_RESULT_FQDAN 0x25
-#define QBMAN_RESULT_CDAN 0x26
-#define QBMAN_RESULT_CSCN_MEM 0x27
-#define QBMAN_RESULT_CGCU 0x28
-#define QBMAN_RESULT_BPSCN 0x29
-#define QBMAN_RESULT_CSCN_WQ 0x2a
-
-/* QBMan FQ management command codes */
-#define QBMAN_FQ_SCHEDULE 0x48
-#define QBMAN_FQ_FORCE 0x49
-#define QBMAN_FQ_XON 0x4d
-#define QBMAN_FQ_XOFF 0x4e
-
-/* structure of enqueue descriptor */
-struct qbman_eq_desc {
- u8 verb;
- u8 dca;
- __le16 seqnum;
- __le16 orpid;
- __le16 reserved1;
- __le32 tgtid;
- __le32 tag;
- __le16 qdbin;
- u8 qpri;
- u8 reserved[3];
- u8 wae;
- u8 rspid;
- __le64 rsp_addr;
- u8 fd[32];
-};
-
-/* buffer release descriptor */
-struct qbman_release_desc {
- u8 verb;
- u8 reserved;
- __le16 bpid;
- __le32 reserved2;
- __le64 buf[7];
-};
-
-/* Management command result codes */
-#define QBMAN_MC_RSLT_OK 0xf0
-
-#define CODE_CDAN_WE_EN 0x1
-#define CODE_CDAN_WE_CTX 0x4
-
-/* portal data structure */
-struct qbman_swp {
- const struct qbman_swp_desc *desc;
- void __iomem *addr_cena;
- void __iomem *addr_cinh;
-
- /* Management commands */
- struct {
- u32 valid_bit; /* 0x00 or 0x80 */
- } mc;
-
- /* Push dequeues */
- u32 sdq;
-
- /* Volatile dequeues */
- struct {
- atomic_t available; /* indicates if a command can be sent */
- u32 valid_bit; /* 0x00 or 0x80 */
- struct dpaa2_dq *storage; /* NULL if DQRR */
- } vdq;
-
- /* DQRR */
- struct {
- u32 next_idx;
- u32 valid_bit;
- u8 dqrr_size;
- int reset_bug; /* indicates dqrr reset workaround is needed */
- } dqrr;
-};
-
-struct qbman_swp *qbman_swp_init(const struct qbman_swp_desc *d);
-void qbman_swp_finish(struct qbman_swp *p);
-u32 qbman_swp_interrupt_read_status(struct qbman_swp *p);
-void qbman_swp_interrupt_clear_status(struct qbman_swp *p, u32 mask);
-u32 qbman_swp_interrupt_get_trigger(struct qbman_swp *p);
-void qbman_swp_interrupt_set_trigger(struct qbman_swp *p, u32 mask);
-int qbman_swp_interrupt_get_inhibit(struct qbman_swp *p);
-void qbman_swp_interrupt_set_inhibit(struct qbman_swp *p, int inhibit);
-
-void qbman_swp_push_get(struct qbman_swp *p, u8 channel_idx, int *enabled);
-void qbman_swp_push_set(struct qbman_swp *p, u8 channel_idx, int enable);
-
-void qbman_pull_desc_clear(struct qbman_pull_desc *d);
-void qbman_pull_desc_set_storage(struct qbman_pull_desc *d,
- struct dpaa2_dq *storage,
- dma_addr_t storage_phys,
- int stash);
-void qbman_pull_desc_set_numframes(struct qbman_pull_desc *d, u8 numframes);
-void qbman_pull_desc_set_fq(struct qbman_pull_desc *d, u32 fqid);
-void qbman_pull_desc_set_wq(struct qbman_pull_desc *d, u32 wqid,
- enum qbman_pull_type_e dct);
-void qbman_pull_desc_set_channel(struct qbman_pull_desc *d, u32 chid,
- enum qbman_pull_type_e dct);
-
-int qbman_swp_pull(struct qbman_swp *p, struct qbman_pull_desc *d);
-
-const struct dpaa2_dq *qbman_swp_dqrr_next(struct qbman_swp *s);
-void qbman_swp_dqrr_consume(struct qbman_swp *s, const struct dpaa2_dq *dq);
-
-int qbman_result_has_new_result(struct qbman_swp *p, const struct dpaa2_dq *dq);
-
-void qbman_eq_desc_clear(struct qbman_eq_desc *d);
-void qbman_eq_desc_set_no_orp(struct qbman_eq_desc *d, int respond_success);
-void qbman_eq_desc_set_token(struct qbman_eq_desc *d, u8 token);
-void qbman_eq_desc_set_fq(struct qbman_eq_desc *d, u32 fqid);
-void qbman_eq_desc_set_qd(struct qbman_eq_desc *d, u32 qdid,
- u32 qd_bin, u32 qd_prio);
-
-int qbman_swp_enqueue(struct qbman_swp *p, const struct qbman_eq_desc *d,
- const struct dpaa2_fd *fd);
-
-void qbman_release_desc_clear(struct qbman_release_desc *d);
-void qbman_release_desc_set_bpid(struct qbman_release_desc *d, u16 bpid);
-void qbman_release_desc_set_rcdi(struct qbman_release_desc *d, int enable);
-
-int qbman_swp_release(struct qbman_swp *s, const struct qbman_release_desc *d,
- const u64 *buffers, unsigned int num_buffers);
-int qbman_swp_acquire(struct qbman_swp *s, u16 bpid, u64 *buffers,
- unsigned int num_buffers);
-int qbman_swp_alt_fq_state(struct qbman_swp *s, u32 fqid,
- u8 alt_fq_verb);
-int qbman_swp_CDAN_set(struct qbman_swp *s, u16 channelid,
- u8 we_mask, u8 cdan_en,
- u64 ctx);
-
-void *qbman_swp_mc_start(struct qbman_swp *p);
-void qbman_swp_mc_submit(struct qbman_swp *p, void *cmd, u8 cmd_verb);
-void *qbman_swp_mc_result(struct qbman_swp *p);
-
-/**
- * qbman_result_is_DQ() - check if the dequeue result is a dequeue response
- * @dq: the dequeue result to be checked
- *
- * DQRR entries may contain non-dequeue results, ie. notifications
- */
-static inline int qbman_result_is_DQ(const struct dpaa2_dq *dq)
-{
- return ((dq->dq.verb & QBMAN_RESULT_MASK) == QBMAN_RESULT_DQ);
-}
-
-/**
- * qbman_result_is_SCN() - Check the dequeue result is notification or not
- * @dq: the dequeue result to be checked
- *
- */
-static inline int qbman_result_is_SCN(const struct dpaa2_dq *dq)
-{
- return !qbman_result_is_DQ(dq);
-}
-
-/* FQ Data Availability */
-static inline int qbman_result_is_FQDAN(const struct dpaa2_dq *dq)
-{
- return ((dq->dq.verb & QBMAN_RESULT_MASK) == QBMAN_RESULT_FQDAN);
-}
-
-/* Channel Data Availability */
-static inline int qbman_result_is_CDAN(const struct dpaa2_dq *dq)
-{
- return ((dq->dq.verb & QBMAN_RESULT_MASK) == QBMAN_RESULT_CDAN);
-}
-
-/* Congestion State Change */
-static inline int qbman_result_is_CSCN(const struct dpaa2_dq *dq)
-{
- return ((dq->dq.verb & QBMAN_RESULT_MASK) == QBMAN_RESULT_CSCN_WQ);
-}
-
-/* Buffer Pool State Change */
-static inline int qbman_result_is_BPSCN(const struct dpaa2_dq *dq)
-{
- return ((dq->dq.verb & QBMAN_RESULT_MASK) == QBMAN_RESULT_BPSCN);
-}
-
-/* Congestion Group Count Update */
-static inline int qbman_result_is_CGCU(const struct dpaa2_dq *dq)
-{
- return ((dq->dq.verb & QBMAN_RESULT_MASK) == QBMAN_RESULT_CGCU);
-}
-
-/* Retirement */
-static inline int qbman_result_is_FQRN(const struct dpaa2_dq *dq)
-{
- return ((dq->dq.verb & QBMAN_RESULT_MASK) == QBMAN_RESULT_FQRN);
-}
-
-/* Retirement Immediate */
-static inline int qbman_result_is_FQRNI(const struct dpaa2_dq *dq)
-{
- return ((dq->dq.verb & QBMAN_RESULT_MASK) == QBMAN_RESULT_FQRNI);
-}
-
- /* Park */
-static inline int qbman_result_is_FQPN(const struct dpaa2_dq *dq)
-{
- return ((dq->dq.verb & QBMAN_RESULT_MASK) == QBMAN_RESULT_FQPN);
-}
-
-/**
- * qbman_result_SCN_state() - Get the state field in State-change notification
- */
-static inline u8 qbman_result_SCN_state(const struct dpaa2_dq *scn)
-{
- return scn->scn.state;
-}
-
-#define SCN_RID_MASK 0x00FFFFFF
-
-/**
- * qbman_result_SCN_rid() - Get the resource id in State-change notification
- */
-static inline u32 qbman_result_SCN_rid(const struct dpaa2_dq *scn)
-{
- return le32_to_cpu(scn->scn.rid_tok) & SCN_RID_MASK;
-}
-
-/**
- * qbman_result_SCN_ctx() - Get the context data in State-change notification
- */
-static inline u64 qbman_result_SCN_ctx(const struct dpaa2_dq *scn)
-{
- return le64_to_cpu(scn->scn.ctx);
-}
-
-/**
- * qbman_swp_fq_schedule() - Move the fq to the scheduled state
- * @s: the software portal object
- * @fqid: the index of frame queue to be scheduled
- *
- * There are a couple of different ways that a FQ can end up parked state,
- * This schedules it.
- *
- * Return 0 for success, or negative error code for failure.
- */
-static inline int qbman_swp_fq_schedule(struct qbman_swp *s, u32 fqid)
-{
- return qbman_swp_alt_fq_state(s, fqid, QBMAN_FQ_SCHEDULE);
-}
-
-/**
- * qbman_swp_fq_force() - Force the FQ to fully scheduled state
- * @s: the software portal object
- * @fqid: the index of frame queue to be forced
- *
- * Force eligible will force a tentatively-scheduled FQ to be fully-scheduled
- * and thus be available for selection by any channel-dequeuing behaviour (push
- * or pull). If the FQ is subsequently "dequeued" from the channel and is still
- * empty at the time this happens, the resulting dq_entry will have no FD.
- * (qbman_result_DQ_fd() will return NULL.)
- *
- * Return 0 for success, or negative error code for failure.
- */
-static inline int qbman_swp_fq_force(struct qbman_swp *s, u32 fqid)
-{
- return qbman_swp_alt_fq_state(s, fqid, QBMAN_FQ_FORCE);
-}
-
-/**
- * qbman_swp_fq_xon() - sets FQ flow-control to XON
- * @s: the software portal object
- * @fqid: the index of frame queue
- *
- * This setting doesn't affect enqueues to the FQ, just dequeues.
- *
- * Return 0 for success, or negative error code for failure.
- */
-static inline int qbman_swp_fq_xon(struct qbman_swp *s, u32 fqid)
-{
- return qbman_swp_alt_fq_state(s, fqid, QBMAN_FQ_XON);
-}
-
-/**
- * qbman_swp_fq_xoff() - sets FQ flow-control to XOFF
- * @s: the software portal object
- * @fqid: the index of frame queue
- *
- * This setting doesn't affect enqueues to the FQ, just dequeues.
- * XOFF FQs will remain in the tenatively-scheduled state, even when
- * non-empty, meaning they won't be selected for scheduled dequeuing.
- * If a FQ is changed to XOFF after it had already become truly-scheduled
- * to a channel, and a pull dequeue of that channel occurs that selects
- * that FQ for dequeuing, then the resulting dq_entry will have no FD.
- * (qbman_result_DQ_fd() will return NULL.)
- *
- * Return 0 for success, or negative error code for failure.
- */
-static inline int qbman_swp_fq_xoff(struct qbman_swp *s, u32 fqid)
-{
- return qbman_swp_alt_fq_state(s, fqid, QBMAN_FQ_XOFF);
-}
-
-/* If the user has been allocated a channel object that is going to generate
- * CDANs to another channel, then the qbman_swp_CDAN* functions will be
- * necessary.
- *
- * CDAN-enabled channels only generate a single CDAN notification, after which
- * they need to be reenabled before they'll generate another. The idea is
- * that pull dequeuing will occur in reaction to the CDAN, followed by a
- * reenable step. Each function generates a distinct command to hardware, so a
- * combination function is provided if the user wishes to modify the "context"
- * (which shows up in each CDAN message) each time they reenable, as a single
- * command to hardware.
- */
-
-/**
- * qbman_swp_CDAN_set_context() - Set CDAN context
- * @s: the software portal object
- * @channelid: the channel index
- * @ctx: the context to be set in CDAN
- *
- * Return 0 for success, or negative error code for failure.
- */
-static inline int qbman_swp_CDAN_set_context(struct qbman_swp *s, u16 channelid,
- u64 ctx)
-{
- return qbman_swp_CDAN_set(s, channelid,
- CODE_CDAN_WE_CTX,
- 0, ctx);
-}
-
-/**
- * qbman_swp_CDAN_enable() - Enable CDAN for the channel
- * @s: the software portal object
- * @channelid: the index of the channel to generate CDAN
- *
- * Return 0 for success, or negative error code for failure.
- */
-static inline int qbman_swp_CDAN_enable(struct qbman_swp *s, u16 channelid)
-{
- return qbman_swp_CDAN_set(s, channelid,
- CODE_CDAN_WE_EN,
- 1, 0);
-}
-
-/**
- * qbman_swp_CDAN_disable() - disable CDAN for the channel
- * @s: the software portal object
- * @channelid: the index of the channel to generate CDAN
- *
- * Return 0 for success, or negative error code for failure.
- */
-static inline int qbman_swp_CDAN_disable(struct qbman_swp *s, u16 channelid)
-{
- return qbman_swp_CDAN_set(s, channelid,
- CODE_CDAN_WE_EN,
- 0, 0);
-}
-
-/**
- * qbman_swp_CDAN_set_context_enable() - Set CDAN contest and enable CDAN
- * @s: the software portal object
- * @channelid: the index of the channel to generate CDAN
- * @ctx:i the context set in CDAN
- *
- * Return 0 for success, or negative error code for failure.
- */
-static inline int qbman_swp_CDAN_set_context_enable(struct qbman_swp *s,
- u16 channelid,
- u64 ctx)
-{
- return qbman_swp_CDAN_set(s, channelid,
- CODE_CDAN_WE_EN | CODE_CDAN_WE_CTX,
- 1, ctx);
-}
-
-/* Wraps up submit + poll-for-result */
-static inline void *qbman_swp_mc_complete(struct qbman_swp *swp, void *cmd,
- u8 cmd_verb)
-{
- int loopvar = 1000;
-
- qbman_swp_mc_submit(swp, cmd, cmd_verb);
-
- do {
- cmd = qbman_swp_mc_result(swp);
- } while (!cmd && loopvar--);
-
- WARN_ON(!loopvar);
-
- return cmd;
-}
-
-#endif /* __FSL_QBMAN_PORTAL_H */
diff --git a/drivers/staging/fsl-mc/include/dpaa2-fd.h b/drivers/staging/fsl-mc/include/dpaa2-fd.h
deleted file mode 100644
index b55b89b..0000000
--- a/drivers/staging/fsl-mc/include/dpaa2-fd.h
+++ /dev/null
@@ -1,426 +0,0 @@
-/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
-/*
- * Copyright 2014-2016 Freescale Semiconductor Inc.
- * Copyright 2016 NXP
- *
- */
-#ifndef __FSL_DPAA2_FD_H
-#define __FSL_DPAA2_FD_H
-
-#include <linux/kernel.h>
-
-/**
- * DOC: DPAA2 FD - Frame Descriptor APIs for DPAA2
- *
- * Frame Descriptors (FDs) are used to describe frame data in the DPAA2.
- * Frames can be enqueued and dequeued to Frame Queues (FQs) which are consumed
- * by the various DPAA accelerators (WRIOP, SEC, PME, DCE)
- *
- * There are three types of frames: single, scatter gather, and frame lists.
- *
- * The set of APIs in this file must be used to create, manipulate and
- * query Frame Descriptors.
- */
-
-/**
- * struct dpaa2_fd - Struct describing FDs
- * @words: for easier/faster copying the whole FD structure
- * @addr: address in the FD
- * @len: length in the FD
- * @bpid: buffer pool ID
- * @format_offset: format, offset, and short-length fields
- * @frc: frame context
- * @ctrl: control bits...including dd, sc, va, err, etc
- * @flc: flow context address
- *
- * This structure represents the basic Frame Descriptor used in the system.
- */
-struct dpaa2_fd {
- union {
- u32 words[8];
- struct dpaa2_fd_simple {
- __le64 addr;
- __le32 len;
- __le16 bpid;
- __le16 format_offset;
- __le32 frc;
- __le32 ctrl;
- __le64 flc;
- } simple;
- };
-};
-
-#define FD_SHORT_LEN_FLAG_MASK 0x1
-#define FD_SHORT_LEN_FLAG_SHIFT 14
-#define FD_SHORT_LEN_MASK 0x3FFFF
-#define FD_OFFSET_MASK 0x0FFF
-#define FD_FORMAT_MASK 0x3
-#define FD_FORMAT_SHIFT 12
-#define FD_BPID_MASK 0x3FFF
-#define SG_SHORT_LEN_FLAG_MASK 0x1
-#define SG_SHORT_LEN_FLAG_SHIFT 14
-#define SG_SHORT_LEN_MASK 0x1FFFF
-#define SG_OFFSET_MASK 0x0FFF
-#define SG_FORMAT_MASK 0x3
-#define SG_FORMAT_SHIFT 12
-#define SG_BPID_MASK 0x3FFF
-#define SG_FINAL_FLAG_MASK 0x1
-#define SG_FINAL_FLAG_SHIFT 15
-
-enum dpaa2_fd_format {
- dpaa2_fd_single = 0,
- dpaa2_fd_list,
- dpaa2_fd_sg
-};
-
-/**
- * dpaa2_fd_get_addr() - get the addr field of frame descriptor
- * @fd: the given frame descriptor
- *
- * Return the address in the frame descriptor.
- */
-static inline dma_addr_t dpaa2_fd_get_addr(const struct dpaa2_fd *fd)
-{
- return (dma_addr_t)le64_to_cpu(fd->simple.addr);
-}
-
-/**
- * dpaa2_fd_set_addr() - Set the addr field of frame descriptor
- * @fd: the given frame descriptor
- * @addr: the address needs to be set in frame descriptor
- */
-static inline void dpaa2_fd_set_addr(struct dpaa2_fd *fd, dma_addr_t addr)
-{
- fd->simple.addr = cpu_to_le64(addr);
-}
-
-/**
- * dpaa2_fd_get_frc() - Get the frame context in the frame descriptor
- * @fd: the given frame descriptor
- *
- * Return the frame context field in the frame descriptor.
- */
-static inline u32 dpaa2_fd_get_frc(const struct dpaa2_fd *fd)
-{
- return le32_to_cpu(fd->simple.frc);
-}
-
-/**
- * dpaa2_fd_set_frc() - Set the frame context in the frame descriptor
- * @fd: the given frame descriptor
- * @frc: the frame context needs to be set in frame descriptor
- */
-static inline void dpaa2_fd_set_frc(struct dpaa2_fd *fd, u32 frc)
-{
- fd->simple.frc = cpu_to_le32(frc);
-}
-
-/**
- * dpaa2_fd_get_ctrl() - Get the control bits in the frame descriptor
- * @fd: the given frame descriptor
- *
- * Return the control bits field in the frame descriptor.
- */
-static inline u32 dpaa2_fd_get_ctrl(const struct dpaa2_fd *fd)
-{
- return le32_to_cpu(fd->simple.ctrl);
-}
-
-/**
- * dpaa2_fd_set_ctrl() - Set the control bits in the frame descriptor
- * @fd: the given frame descriptor
- * @ctrl: the control bits to be set in the frame descriptor
- */
-static inline void dpaa2_fd_set_ctrl(struct dpaa2_fd *fd, u32 ctrl)
-{
- fd->simple.ctrl = cpu_to_le32(ctrl);
-}
-
-/**
- * dpaa2_fd_get_flc() - Get the flow context in the frame descriptor
- * @fd: the given frame descriptor
- *
- * Return the flow context in the frame descriptor.
- */
-static inline dma_addr_t dpaa2_fd_get_flc(const struct dpaa2_fd *fd)
-{
- return (dma_addr_t)le64_to_cpu(fd->simple.flc);
-}
-
-/**
- * dpaa2_fd_set_flc() - Set the flow context field of frame descriptor
- * @fd: the given frame descriptor
- * @flc_addr: the flow context needs to be set in frame descriptor
- */
-static inline void dpaa2_fd_set_flc(struct dpaa2_fd *fd, dma_addr_t flc_addr)
-{
- fd->simple.flc = cpu_to_le64(flc_addr);
-}
-
-static inline bool dpaa2_fd_short_len(const struct dpaa2_fd *fd)
-{
- return !!((le16_to_cpu(fd->simple.format_offset) >>
- FD_SHORT_LEN_FLAG_SHIFT) & FD_SHORT_LEN_FLAG_MASK);
-}
-
-/**
- * dpaa2_fd_get_len() - Get the length in the frame descriptor
- * @fd: the given frame descriptor
- *
- * Return the length field in the frame descriptor.
- */
-static inline u32 dpaa2_fd_get_len(const struct dpaa2_fd *fd)
-{
- if (dpaa2_fd_short_len(fd))
- return le32_to_cpu(fd->simple.len) & FD_SHORT_LEN_MASK;
-
- return le32_to_cpu(fd->simple.len);
-}
-
-/**
- * dpaa2_fd_set_len() - Set the length field of frame descriptor
- * @fd: the given frame descriptor
- * @len: the length needs to be set in frame descriptor
- */
-static inline void dpaa2_fd_set_len(struct dpaa2_fd *fd, u32 len)
-{
- fd->simple.len = cpu_to_le32(len);
-}
-
-/**
- * dpaa2_fd_get_offset() - Get the offset field in the frame descriptor
- * @fd: the given frame descriptor
- *
- * Return the offset.
- */
-static inline uint16_t dpaa2_fd_get_offset(const struct dpaa2_fd *fd)
-{
- return le16_to_cpu(fd->simple.format_offset) & FD_OFFSET_MASK;
-}
-
-/**
- * dpaa2_fd_set_offset() - Set the offset field of frame descriptor
- * @fd: the given frame descriptor
- * @offset: the offset needs to be set in frame descriptor
- */
-static inline void dpaa2_fd_set_offset(struct dpaa2_fd *fd, uint16_t offset)
-{
- fd->simple.format_offset &= cpu_to_le16(~FD_OFFSET_MASK);
- fd->simple.format_offset |= cpu_to_le16(offset);
-}
-
-/**
- * dpaa2_fd_get_format() - Get the format field in the frame descriptor
- * @fd: the given frame descriptor
- *
- * Return the format.
- */
-static inline enum dpaa2_fd_format dpaa2_fd_get_format(
- const struct dpaa2_fd *fd)
-{
- return (enum dpaa2_fd_format)((le16_to_cpu(fd->simple.format_offset)
- >> FD_FORMAT_SHIFT) & FD_FORMAT_MASK);
-}
-
-/**
- * dpaa2_fd_set_format() - Set the format field of frame descriptor
- * @fd: the given frame descriptor
- * @format: the format needs to be set in frame descriptor
- */
-static inline void dpaa2_fd_set_format(struct dpaa2_fd *fd,
- enum dpaa2_fd_format format)
-{
- fd->simple.format_offset &=
- cpu_to_le16(~(FD_FORMAT_MASK << FD_FORMAT_SHIFT));
- fd->simple.format_offset |= cpu_to_le16(format << FD_FORMAT_SHIFT);
-}
-
-/**
- * dpaa2_fd_get_bpid() - Get the bpid field in the frame descriptor
- * @fd: the given frame descriptor
- *
- * Return the buffer pool id.
- */
-static inline uint16_t dpaa2_fd_get_bpid(const struct dpaa2_fd *fd)
-{
- return le16_to_cpu(fd->simple.bpid) & FD_BPID_MASK;
-}
-
-/**
- * dpaa2_fd_set_bpid() - Set the bpid field of frame descriptor
- * @fd: the given frame descriptor
- * @bpid: buffer pool id to be set
- */
-static inline void dpaa2_fd_set_bpid(struct dpaa2_fd *fd, uint16_t bpid)
-{
- fd->simple.bpid &= cpu_to_le16(~(FD_BPID_MASK));
- fd->simple.bpid |= cpu_to_le16(bpid);
-}
-
-/**
- * struct dpaa2_sg_entry - the scatter-gathering structure
- * @addr: address of the sg entry
- * @len: length in this sg entry
- * @bpid: buffer pool id
- * @format_offset: format and offset fields
- */
-struct dpaa2_sg_entry {
- __le64 addr;
- __le32 len;
- __le16 bpid;
- __le16 format_offset;
-};
-
-enum dpaa2_sg_format {
- dpaa2_sg_single = 0,
- dpaa2_sg_frame_data,
- dpaa2_sg_sgt_ext
-};
-
-/* Accessors for SG entry fields */
-
-/**
- * dpaa2_sg_get_addr() - Get the address from SG entry
- * @sg: the given scatter-gathering object
- *
- * Return the address.
- */
-static inline dma_addr_t dpaa2_sg_get_addr(const struct dpaa2_sg_entry *sg)
-{
- return (dma_addr_t)le64_to_cpu(sg->addr);
-}
-
-/**
- * dpaa2_sg_set_addr() - Set the address in SG entry
- * @sg: the given scatter-gathering object
- * @addr: the address to be set
- */
-static inline void dpaa2_sg_set_addr(struct dpaa2_sg_entry *sg, dma_addr_t addr)
-{
- sg->addr = cpu_to_le64(addr);
-}
-
-static inline bool dpaa2_sg_short_len(const struct dpaa2_sg_entry *sg)
-{
- return !!((le16_to_cpu(sg->format_offset) >> SG_SHORT_LEN_FLAG_SHIFT)
- & SG_SHORT_LEN_FLAG_MASK);
-}
-
-/**
- * dpaa2_sg_get_len() - Get the length in SG entry
- * @sg: the given scatter-gathering object
- *
- * Return the length.
- */
-static inline u32 dpaa2_sg_get_len(const struct dpaa2_sg_entry *sg)
-{
- if (dpaa2_sg_short_len(sg))
- return le32_to_cpu(sg->len) & SG_SHORT_LEN_MASK;
-
- return le32_to_cpu(sg->len);
-}
-
-/**
- * dpaa2_sg_set_len() - Set the length in SG entry
- * @sg: the given scatter-gathering object
- * @len: the length to be set
- */
-static inline void dpaa2_sg_set_len(struct dpaa2_sg_entry *sg, u32 len)
-{
- sg->len = cpu_to_le32(len);
-}
-
-/**
- * dpaa2_sg_get_offset() - Get the offset in SG entry
- * @sg: the given scatter-gathering object
- *
- * Return the offset.
- */
-static inline u16 dpaa2_sg_get_offset(const struct dpaa2_sg_entry *sg)
-{
- return le16_to_cpu(sg->format_offset) & SG_OFFSET_MASK;
-}
-
-/**
- * dpaa2_sg_set_offset() - Set the offset in SG entry
- * @sg: the given scatter-gathering object
- * @offset: the offset to be set
- */
-static inline void dpaa2_sg_set_offset(struct dpaa2_sg_entry *sg,
- u16 offset)
-{
- sg->format_offset &= cpu_to_le16(~SG_OFFSET_MASK);
- sg->format_offset |= cpu_to_le16(offset);
-}
-
-/**
- * dpaa2_sg_get_format() - Get the SG format in SG entry
- * @sg: the given scatter-gathering object
- *
- * Return the format.
- */
-static inline enum dpaa2_sg_format
- dpaa2_sg_get_format(const struct dpaa2_sg_entry *sg)
-{
- return (enum dpaa2_sg_format)((le16_to_cpu(sg->format_offset)
- >> SG_FORMAT_SHIFT) & SG_FORMAT_MASK);
-}
-
-/**
- * dpaa2_sg_set_format() - Set the SG format in SG entry
- * @sg: the given scatter-gathering object
- * @format: the format to be set
- */
-static inline void dpaa2_sg_set_format(struct dpaa2_sg_entry *sg,
- enum dpaa2_sg_format format)
-{
- sg->format_offset &= cpu_to_le16(~(SG_FORMAT_MASK << SG_FORMAT_SHIFT));
- sg->format_offset |= cpu_to_le16(format << SG_FORMAT_SHIFT);
-}
-
-/**
- * dpaa2_sg_get_bpid() - Get the buffer pool id in SG entry
- * @sg: the given scatter-gathering object
- *
- * Return the bpid.
- */
-static inline u16 dpaa2_sg_get_bpid(const struct dpaa2_sg_entry *sg)
-{
- return le16_to_cpu(sg->bpid) & SG_BPID_MASK;
-}
-
-/**
- * dpaa2_sg_set_bpid() - Set the buffer pool id in SG entry
- * @sg: the given scatter-gathering object
- * @bpid: the bpid to be set
- */
-static inline void dpaa2_sg_set_bpid(struct dpaa2_sg_entry *sg, u16 bpid)
-{
- sg->bpid &= cpu_to_le16(~(SG_BPID_MASK));
- sg->bpid |= cpu_to_le16(bpid);
-}
-
-/**
- * dpaa2_sg_is_final() - Check final bit in SG entry
- * @sg: the given scatter-gathering object
- *
- * Return bool.
- */
-static inline bool dpaa2_sg_is_final(const struct dpaa2_sg_entry *sg)
-{
- return !!(le16_to_cpu(sg->format_offset) >> SG_FINAL_FLAG_SHIFT);
-}
-
-/**
- * dpaa2_sg_set_final() - Set the final bit in SG entry
- * @sg: the given scatter-gathering object
- * @final: the final boolean to be set
- */
-static inline void dpaa2_sg_set_final(struct dpaa2_sg_entry *sg, bool final)
-{
- sg->format_offset &= cpu_to_le16((~(SG_FINAL_FLAG_MASK
- << SG_FINAL_FLAG_SHIFT)) & 0xFFFF);
- sg->format_offset |= cpu_to_le16(final << SG_FINAL_FLAG_SHIFT);
-}
-
-#endif /* __FSL_DPAA2_FD_H */
diff --git a/drivers/staging/fsl-mc/include/dpaa2-global.h b/drivers/staging/fsl-mc/include/dpaa2-global.h
deleted file mode 100644
index 9bc0713..0000000
--- a/drivers/staging/fsl-mc/include/dpaa2-global.h
+++ /dev/null
@@ -1,177 +0,0 @@
-/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
-/*
- * Copyright 2014-2016 Freescale Semiconductor Inc.
- * Copyright 2016 NXP
- *
- */
-#ifndef __FSL_DPAA2_GLOBAL_H
-#define __FSL_DPAA2_GLOBAL_H
-
-#include <linux/types.h>
-#include <linux/cpumask.h>
-#include "dpaa2-fd.h"
-
-struct dpaa2_dq {
- union {
- struct common {
- u8 verb;
- u8 reserved[63];
- } common;
- struct dq {
- u8 verb;
- u8 stat;
- __le16 seqnum;
- __le16 oprid;
- u8 reserved;
- u8 tok;
- __le32 fqid;
- u32 reserved2;
- __le32 fq_byte_cnt;
- __le32 fq_frm_cnt;
- __le64 fqd_ctx;
- u8 fd[32];
- } dq;
- struct scn {
- u8 verb;
- u8 stat;
- u8 state;
- u8 reserved;
- __le32 rid_tok;
- __le64 ctx;
- } scn;
- };
-};
-
-/* Parsing frame dequeue results */
-/* FQ empty */
-#define DPAA2_DQ_STAT_FQEMPTY 0x80
-/* FQ held active */
-#define DPAA2_DQ_STAT_HELDACTIVE 0x40
-/* FQ force eligible */
-#define DPAA2_DQ_STAT_FORCEELIGIBLE 0x20
-/* valid frame */
-#define DPAA2_DQ_STAT_VALIDFRAME 0x10
-/* FQ ODP enable */
-#define DPAA2_DQ_STAT_ODPVALID 0x04
-/* volatile dequeue */
-#define DPAA2_DQ_STAT_VOLATILE 0x02
-/* volatile dequeue command is expired */
-#define DPAA2_DQ_STAT_EXPIRED 0x01
-
-#define DQ_FQID_MASK 0x00FFFFFF
-#define DQ_FRAME_COUNT_MASK 0x00FFFFFF
-
-/**
- * dpaa2_dq_flags() - Get the stat field of dequeue response
- * @dq: the dequeue result.
- */
-static inline u32 dpaa2_dq_flags(const struct dpaa2_dq *dq)
-{
- return dq->dq.stat;
-}
-
-/**
- * dpaa2_dq_is_pull() - Check whether the dq response is from a pull
- * command.
- * @dq: the dequeue result
- *
- * Return 1 for volatile(pull) dequeue, 0 for static dequeue.
- */
-static inline int dpaa2_dq_is_pull(const struct dpaa2_dq *dq)
-{
- return (int)(dpaa2_dq_flags(dq) & DPAA2_DQ_STAT_VOLATILE);
-}
-
-/**
- * dpaa2_dq_is_pull_complete() - Check whether the pull command is completed.
- * @dq: the dequeue result
- *
- * Return boolean.
- */
-static inline bool dpaa2_dq_is_pull_complete(const struct dpaa2_dq *dq)
-{
- return !!(dpaa2_dq_flags(dq) & DPAA2_DQ_STAT_EXPIRED);
-}
-
-/**
- * dpaa2_dq_seqnum() - Get the seqnum field in dequeue response
- * @dq: the dequeue result
- *
- * seqnum is valid only if VALIDFRAME flag is TRUE
- *
- * Return seqnum.
- */
-static inline u16 dpaa2_dq_seqnum(const struct dpaa2_dq *dq)
-{
- return le16_to_cpu(dq->dq.seqnum);
-}
-
-/**
- * dpaa2_dq_odpid() - Get the odpid field in dequeue response
- * @dq: the dequeue result
- *
- * odpid is valid only if ODPVALID flag is TRUE.
- *
- * Return odpid.
- */
-static inline u16 dpaa2_dq_odpid(const struct dpaa2_dq *dq)
-{
- return le16_to_cpu(dq->dq.oprid);
-}
-
-/**
- * dpaa2_dq_fqid() - Get the fqid in dequeue response
- * @dq: the dequeue result
- *
- * Return fqid.
- */
-static inline u32 dpaa2_dq_fqid(const struct dpaa2_dq *dq)
-{
- return le32_to_cpu(dq->dq.fqid) & DQ_FQID_MASK;
-}
-
-/**
- * dpaa2_dq_byte_count() - Get the byte count in dequeue response
- * @dq: the dequeue result
- *
- * Return the byte count remaining in the FQ.
- */
-static inline u32 dpaa2_dq_byte_count(const struct dpaa2_dq *dq)
-{
- return le32_to_cpu(dq->dq.fq_byte_cnt);
-}
-
-/**
- * dpaa2_dq_frame_count() - Get the frame count in dequeue response
- * @dq: the dequeue result
- *
- * Return the frame count remaining in the FQ.
- */
-static inline u32 dpaa2_dq_frame_count(const struct dpaa2_dq *dq)
-{
- return le32_to_cpu(dq->dq.fq_frm_cnt) & DQ_FRAME_COUNT_MASK;
-}
-
-/**
- * dpaa2_dq_fd_ctx() - Get the frame queue context in dequeue response
- * @dq: the dequeue result
- *
- * Return the frame queue context.
- */
-static inline u64 dpaa2_dq_fqd_ctx(const struct dpaa2_dq *dq)
-{
- return le64_to_cpu(dq->dq.fqd_ctx);
-}
-
-/**
- * dpaa2_dq_fd() - Get the frame descriptor in dequeue response
- * @dq: the dequeue result
- *
- * Return the frame descriptor.
- */
-static inline const struct dpaa2_fd *dpaa2_dq_fd(const struct dpaa2_dq *dq)
-{
- return (const struct dpaa2_fd *)&dq->dq.fd[0];
-}
-
-#endif /* __FSL_DPAA2_GLOBAL_H */
diff --git a/drivers/staging/fsl-mc/include/dpaa2-io.h b/drivers/staging/fsl-mc/include/dpaa2-io.h
deleted file mode 100644
index f71227d..0000000
--- a/drivers/staging/fsl-mc/include/dpaa2-io.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
-/*
- * Copyright 2014-2016 Freescale Semiconductor Inc.
- * Copyright NXP
- *
- */
-#ifndef __FSL_DPAA2_IO_H
-#define __FSL_DPAA2_IO_H
-
-#include <linux/types.h>
-#include <linux/cpumask.h>
-#include <linux/irqreturn.h>
-
-#include "dpaa2-fd.h"
-#include "dpaa2-global.h"
-
-struct dpaa2_io;
-struct dpaa2_io_store;
-struct device;
-
-/**
- * DOC: DPIO Service
- *
- * The DPIO service provides APIs for users to interact with the datapath
- * by enqueueing and dequeing frame descriptors.
- *
- * The following set of APIs can be used to enqueue and dequeue frames
- * as well as producing notification callbacks when data is available
- * for dequeue.
- */
-
-#define DPAA2_IO_ANY_CPU -1
-
-/**
- * struct dpaa2_io_desc - The DPIO descriptor
- * @receives_notifications: Use notificaton mode. Non-zero if the DPIO
- * has a channel.
- * @has_8prio: Set to non-zero for channel with 8 priority WQs. Ignored
- * unless receives_notification is TRUE.
- * @cpu: The cpu index that at least interrupt handlers will
- * execute on.
- * @stash_affinity: The stash affinity for this portal favour 'cpu'
- * @regs_cena: The cache enabled regs.
- * @regs_cinh: The cache inhibited regs
- * @dpio_id: The dpio index
- * @qman_version: The qman version
- *
- * Describes the attributes and features of the DPIO object.
- */
-struct dpaa2_io_desc {
- int receives_notifications;
- int has_8prio;
- int cpu;
- void *regs_cena;
- void *regs_cinh;
- int dpio_id;
- u32 qman_version;
-};
-
-struct dpaa2_io *dpaa2_io_create(const struct dpaa2_io_desc *desc);
-
-void dpaa2_io_down(struct dpaa2_io *d);
-
-irqreturn_t dpaa2_io_irq(struct dpaa2_io *obj);
-
-struct dpaa2_io *dpaa2_io_service_select(int cpu);
-
-/**
- * struct dpaa2_io_notification_ctx - The DPIO notification context structure
- * @cb: The callback to be invoked when the notification arrives
- * @is_cdan: Zero for FQDAN, non-zero for CDAN
- * @id: FQID or channel ID, needed for rearm
- * @desired_cpu: The cpu on which the notifications will show up. Use
- * DPAA2_IO_ANY_CPU if don't care
- * @dpio_id: The dpio index
- * @qman64: The 64-bit context value shows up in the FQDAN/CDAN.
- * @node: The list node
- * @dpio_private: The dpio object internal to dpio_service
- *
- * Used when a FQDAN/CDAN registration is made by drivers.
- */
-struct dpaa2_io_notification_ctx {
- void (*cb)(struct dpaa2_io_notification_ctx *ctx);
- int is_cdan;
- u32 id;
- int desired_cpu;
- int dpio_id;
- u64 qman64;
- struct list_head node;
- void *dpio_private;
-};
-
-int dpaa2_io_service_register(struct dpaa2_io *service,
- struct dpaa2_io_notification_ctx *ctx);
-void dpaa2_io_service_deregister(struct dpaa2_io *service,
- struct dpaa2_io_notification_ctx *ctx);
-int dpaa2_io_service_rearm(struct dpaa2_io *service,
- struct dpaa2_io_notification_ctx *ctx);
-
-int dpaa2_io_service_pull_channel(struct dpaa2_io *d, u32 channelid,
- struct dpaa2_io_store *s);
-
-int dpaa2_io_service_enqueue_qd(struct dpaa2_io *d, u32 qdid, u8 prio,
- u16 qdbin, const struct dpaa2_fd *fd);
-int dpaa2_io_service_release(struct dpaa2_io *d, u32 bpid,
- const u64 *buffers, unsigned int num_buffers);
-int dpaa2_io_service_acquire(struct dpaa2_io *d, u32 bpid,
- u64 *buffers, unsigned int num_buffers);
-
-struct dpaa2_io_store *dpaa2_io_store_create(unsigned int max_frames,
- struct device *dev);
-void dpaa2_io_store_destroy(struct dpaa2_io_store *s);
-struct dpaa2_dq *dpaa2_io_store_next(struct dpaa2_io_store *s, int *is_last);
-
-#endif /* __FSL_DPAA2_IO_H */
diff --git a/include/soc/fsl/dpaa2-fd.h b/include/soc/fsl/dpaa2-fd.h
new file mode 100644
index 0000000..b55b89b
--- /dev/null
+++ b/include/soc/fsl/dpaa2-fd.h
@@ -0,0 +1,426 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright 2014-2016 Freescale Semiconductor Inc.
+ * Copyright 2016 NXP
+ *
+ */
+#ifndef __FSL_DPAA2_FD_H
+#define __FSL_DPAA2_FD_H
+
+#include <linux/kernel.h>
+
+/**
+ * DOC: DPAA2 FD - Frame Descriptor APIs for DPAA2
+ *
+ * Frame Descriptors (FDs) are used to describe frame data in the DPAA2.
+ * Frames can be enqueued and dequeued to Frame Queues (FQs) which are consumed
+ * by the various DPAA accelerators (WRIOP, SEC, PME, DCE)
+ *
+ * There are three types of frames: single, scatter gather, and frame lists.
+ *
+ * The set of APIs in this file must be used to create, manipulate and
+ * query Frame Descriptors.
+ */
+
+/**
+ * struct dpaa2_fd - Struct describing FDs
+ * @words: for easier/faster copying the whole FD structure
+ * @addr: address in the FD
+ * @len: length in the FD
+ * @bpid: buffer pool ID
+ * @format_offset: format, offset, and short-length fields
+ * @frc: frame context
+ * @ctrl: control bits...including dd, sc, va, err, etc
+ * @flc: flow context address
+ *
+ * This structure represents the basic Frame Descriptor used in the system.
+ */
+struct dpaa2_fd {
+ union {
+ u32 words[8];
+ struct dpaa2_fd_simple {
+ __le64 addr;
+ __le32 len;
+ __le16 bpid;
+ __le16 format_offset;
+ __le32 frc;
+ __le32 ctrl;
+ __le64 flc;
+ } simple;
+ };
+};
+
+#define FD_SHORT_LEN_FLAG_MASK 0x1
+#define FD_SHORT_LEN_FLAG_SHIFT 14
+#define FD_SHORT_LEN_MASK 0x3FFFF
+#define FD_OFFSET_MASK 0x0FFF
+#define FD_FORMAT_MASK 0x3
+#define FD_FORMAT_SHIFT 12
+#define FD_BPID_MASK 0x3FFF
+#define SG_SHORT_LEN_FLAG_MASK 0x1
+#define SG_SHORT_LEN_FLAG_SHIFT 14
+#define SG_SHORT_LEN_MASK 0x1FFFF
+#define SG_OFFSET_MASK 0x0FFF
+#define SG_FORMAT_MASK 0x3
+#define SG_FORMAT_SHIFT 12
+#define SG_BPID_MASK 0x3FFF
+#define SG_FINAL_FLAG_MASK 0x1
+#define SG_FINAL_FLAG_SHIFT 15
+
+enum dpaa2_fd_format {
+ dpaa2_fd_single = 0,
+ dpaa2_fd_list,
+ dpaa2_fd_sg
+};
+
+/**
+ * dpaa2_fd_get_addr() - get the addr field of frame descriptor
+ * @fd: the given frame descriptor
+ *
+ * Return the address in the frame descriptor.
+ */
+static inline dma_addr_t dpaa2_fd_get_addr(const struct dpaa2_fd *fd)
+{
+ return (dma_addr_t)le64_to_cpu(fd->simple.addr);
+}
+
+/**
+ * dpaa2_fd_set_addr() - Set the addr field of frame descriptor
+ * @fd: the given frame descriptor
+ * @addr: the address needs to be set in frame descriptor
+ */
+static inline void dpaa2_fd_set_addr(struct dpaa2_fd *fd, dma_addr_t addr)
+{
+ fd->simple.addr = cpu_to_le64(addr);
+}
+
+/**
+ * dpaa2_fd_get_frc() - Get the frame context in the frame descriptor
+ * @fd: the given frame descriptor
+ *
+ * Return the frame context field in the frame descriptor.
+ */
+static inline u32 dpaa2_fd_get_frc(const struct dpaa2_fd *fd)
+{
+ return le32_to_cpu(fd->simple.frc);
+}
+
+/**
+ * dpaa2_fd_set_frc() - Set the frame context in the frame descriptor
+ * @fd: the given frame descriptor
+ * @frc: the frame context needs to be set in frame descriptor
+ */
+static inline void dpaa2_fd_set_frc(struct dpaa2_fd *fd, u32 frc)
+{
+ fd->simple.frc = cpu_to_le32(frc);
+}
+
+/**
+ * dpaa2_fd_get_ctrl() - Get the control bits in the frame descriptor
+ * @fd: the given frame descriptor
+ *
+ * Return the control bits field in the frame descriptor.
+ */
+static inline u32 dpaa2_fd_get_ctrl(const struct dpaa2_fd *fd)
+{
+ return le32_to_cpu(fd->simple.ctrl);
+}
+
+/**
+ * dpaa2_fd_set_ctrl() - Set the control bits in the frame descriptor
+ * @fd: the given frame descriptor
+ * @ctrl: the control bits to be set in the frame descriptor
+ */
+static inline void dpaa2_fd_set_ctrl(struct dpaa2_fd *fd, u32 ctrl)
+{
+ fd->simple.ctrl = cpu_to_le32(ctrl);
+}
+
+/**
+ * dpaa2_fd_get_flc() - Get the flow context in the frame descriptor
+ * @fd: the given frame descriptor
+ *
+ * Return the flow context in the frame descriptor.
+ */
+static inline dma_addr_t dpaa2_fd_get_flc(const struct dpaa2_fd *fd)
+{
+ return (dma_addr_t)le64_to_cpu(fd->simple.flc);
+}
+
+/**
+ * dpaa2_fd_set_flc() - Set the flow context field of frame descriptor
+ * @fd: the given frame descriptor
+ * @flc_addr: the flow context needs to be set in frame descriptor
+ */
+static inline void dpaa2_fd_set_flc(struct dpaa2_fd *fd, dma_addr_t flc_addr)
+{
+ fd->simple.flc = cpu_to_le64(flc_addr);
+}
+
+static inline bool dpaa2_fd_short_len(const struct dpaa2_fd *fd)
+{
+ return !!((le16_to_cpu(fd->simple.format_offset) >>
+ FD_SHORT_LEN_FLAG_SHIFT) & FD_SHORT_LEN_FLAG_MASK);
+}
+
+/**
+ * dpaa2_fd_get_len() - Get the length in the frame descriptor
+ * @fd: the given frame descriptor
+ *
+ * Return the length field in the frame descriptor.
+ */
+static inline u32 dpaa2_fd_get_len(const struct dpaa2_fd *fd)
+{
+ if (dpaa2_fd_short_len(fd))
+ return le32_to_cpu(fd->simple.len) & FD_SHORT_LEN_MASK;
+
+ return le32_to_cpu(fd->simple.len);
+}
+
+/**
+ * dpaa2_fd_set_len() - Set the length field of frame descriptor
+ * @fd: the given frame descriptor
+ * @len: the length needs to be set in frame descriptor
+ */
+static inline void dpaa2_fd_set_len(struct dpaa2_fd *fd, u32 len)
+{
+ fd->simple.len = cpu_to_le32(len);
+}
+
+/**
+ * dpaa2_fd_get_offset() - Get the offset field in the frame descriptor
+ * @fd: the given frame descriptor
+ *
+ * Return the offset.
+ */
+static inline uint16_t dpaa2_fd_get_offset(const struct dpaa2_fd *fd)
+{
+ return le16_to_cpu(fd->simple.format_offset) & FD_OFFSET_MASK;
+}
+
+/**
+ * dpaa2_fd_set_offset() - Set the offset field of frame descriptor
+ * @fd: the given frame descriptor
+ * @offset: the offset needs to be set in frame descriptor
+ */
+static inline void dpaa2_fd_set_offset(struct dpaa2_fd *fd, uint16_t offset)
+{
+ fd->simple.format_offset &= cpu_to_le16(~FD_OFFSET_MASK);
+ fd->simple.format_offset |= cpu_to_le16(offset);
+}
+
+/**
+ * dpaa2_fd_get_format() - Get the format field in the frame descriptor
+ * @fd: the given frame descriptor
+ *
+ * Return the format.
+ */
+static inline enum dpaa2_fd_format dpaa2_fd_get_format(
+ const struct dpaa2_fd *fd)
+{
+ return (enum dpaa2_fd_format)((le16_to_cpu(fd->simple.format_offset)
+ >> FD_FORMAT_SHIFT) & FD_FORMAT_MASK);
+}
+
+/**
+ * dpaa2_fd_set_format() - Set the format field of frame descriptor
+ * @fd: the given frame descriptor
+ * @format: the format needs to be set in frame descriptor
+ */
+static inline void dpaa2_fd_set_format(struct dpaa2_fd *fd,
+ enum dpaa2_fd_format format)
+{
+ fd->simple.format_offset &=
+ cpu_to_le16(~(FD_FORMAT_MASK << FD_FORMAT_SHIFT));
+ fd->simple.format_offset |= cpu_to_le16(format << FD_FORMAT_SHIFT);
+}
+
+/**
+ * dpaa2_fd_get_bpid() - Get the bpid field in the frame descriptor
+ * @fd: the given frame descriptor
+ *
+ * Return the buffer pool id.
+ */
+static inline uint16_t dpaa2_fd_get_bpid(const struct dpaa2_fd *fd)
+{
+ return le16_to_cpu(fd->simple.bpid) & FD_BPID_MASK;
+}
+
+/**
+ * dpaa2_fd_set_bpid() - Set the bpid field of frame descriptor
+ * @fd: the given frame descriptor
+ * @bpid: buffer pool id to be set
+ */
+static inline void dpaa2_fd_set_bpid(struct dpaa2_fd *fd, uint16_t bpid)
+{
+ fd->simple.bpid &= cpu_to_le16(~(FD_BPID_MASK));
+ fd->simple.bpid |= cpu_to_le16(bpid);
+}
+
+/**
+ * struct dpaa2_sg_entry - the scatter-gathering structure
+ * @addr: address of the sg entry
+ * @len: length in this sg entry
+ * @bpid: buffer pool id
+ * @format_offset: format and offset fields
+ */
+struct dpaa2_sg_entry {
+ __le64 addr;
+ __le32 len;
+ __le16 bpid;
+ __le16 format_offset;
+};
+
+enum dpaa2_sg_format {
+ dpaa2_sg_single = 0,
+ dpaa2_sg_frame_data,
+ dpaa2_sg_sgt_ext
+};
+
+/* Accessors for SG entry fields */
+
+/**
+ * dpaa2_sg_get_addr() - Get the address from SG entry
+ * @sg: the given scatter-gathering object
+ *
+ * Return the address.
+ */
+static inline dma_addr_t dpaa2_sg_get_addr(const struct dpaa2_sg_entry *sg)
+{
+ return (dma_addr_t)le64_to_cpu(sg->addr);
+}
+
+/**
+ * dpaa2_sg_set_addr() - Set the address in SG entry
+ * @sg: the given scatter-gathering object
+ * @addr: the address to be set
+ */
+static inline void dpaa2_sg_set_addr(struct dpaa2_sg_entry *sg, dma_addr_t addr)
+{
+ sg->addr = cpu_to_le64(addr);
+}
+
+static inline bool dpaa2_sg_short_len(const struct dpaa2_sg_entry *sg)
+{
+ return !!((le16_to_cpu(sg->format_offset) >> SG_SHORT_LEN_FLAG_SHIFT)
+ & SG_SHORT_LEN_FLAG_MASK);
+}
+
+/**
+ * dpaa2_sg_get_len() - Get the length in SG entry
+ * @sg: the given scatter-gathering object
+ *
+ * Return the length.
+ */
+static inline u32 dpaa2_sg_get_len(const struct dpaa2_sg_entry *sg)
+{
+ if (dpaa2_sg_short_len(sg))
+ return le32_to_cpu(sg->len) & SG_SHORT_LEN_MASK;
+
+ return le32_to_cpu(sg->len);
+}
+
+/**
+ * dpaa2_sg_set_len() - Set the length in SG entry
+ * @sg: the given scatter-gathering object
+ * @len: the length to be set
+ */
+static inline void dpaa2_sg_set_len(struct dpaa2_sg_entry *sg, u32 len)
+{
+ sg->len = cpu_to_le32(len);
+}
+
+/**
+ * dpaa2_sg_get_offset() - Get the offset in SG entry
+ * @sg: the given scatter-gathering object
+ *
+ * Return the offset.
+ */
+static inline u16 dpaa2_sg_get_offset(const struct dpaa2_sg_entry *sg)
+{
+ return le16_to_cpu(sg->format_offset) & SG_OFFSET_MASK;
+}
+
+/**
+ * dpaa2_sg_set_offset() - Set the offset in SG entry
+ * @sg: the given scatter-gathering object
+ * @offset: the offset to be set
+ */
+static inline void dpaa2_sg_set_offset(struct dpaa2_sg_entry *sg,
+ u16 offset)
+{
+ sg->format_offset &= cpu_to_le16(~SG_OFFSET_MASK);
+ sg->format_offset |= cpu_to_le16(offset);
+}
+
+/**
+ * dpaa2_sg_get_format() - Get the SG format in SG entry
+ * @sg: the given scatter-gathering object
+ *
+ * Return the format.
+ */
+static inline enum dpaa2_sg_format
+ dpaa2_sg_get_format(const struct dpaa2_sg_entry *sg)
+{
+ return (enum dpaa2_sg_format)((le16_to_cpu(sg->format_offset)
+ >> SG_FORMAT_SHIFT) & SG_FORMAT_MASK);
+}
+
+/**
+ * dpaa2_sg_set_format() - Set the SG format in SG entry
+ * @sg: the given scatter-gathering object
+ * @format: the format to be set
+ */
+static inline void dpaa2_sg_set_format(struct dpaa2_sg_entry *sg,
+ enum dpaa2_sg_format format)
+{
+ sg->format_offset &= cpu_to_le16(~(SG_FORMAT_MASK << SG_FORMAT_SHIFT));
+ sg->format_offset |= cpu_to_le16(format << SG_FORMAT_SHIFT);
+}
+
+/**
+ * dpaa2_sg_get_bpid() - Get the buffer pool id in SG entry
+ * @sg: the given scatter-gathering object
+ *
+ * Return the bpid.
+ */
+static inline u16 dpaa2_sg_get_bpid(const struct dpaa2_sg_entry *sg)
+{
+ return le16_to_cpu(sg->bpid) & SG_BPID_MASK;
+}
+
+/**
+ * dpaa2_sg_set_bpid() - Set the buffer pool id in SG entry
+ * @sg: the given scatter-gathering object
+ * @bpid: the bpid to be set
+ */
+static inline void dpaa2_sg_set_bpid(struct dpaa2_sg_entry *sg, u16 bpid)
+{
+ sg->bpid &= cpu_to_le16(~(SG_BPID_MASK));
+ sg->bpid |= cpu_to_le16(bpid);
+}
+
+/**
+ * dpaa2_sg_is_final() - Check final bit in SG entry
+ * @sg: the given scatter-gathering object
+ *
+ * Return bool.
+ */
+static inline bool dpaa2_sg_is_final(const struct dpaa2_sg_entry *sg)
+{
+ return !!(le16_to_cpu(sg->format_offset) >> SG_FINAL_FLAG_SHIFT);
+}
+
+/**
+ * dpaa2_sg_set_final() - Set the final bit in SG entry
+ * @sg: the given scatter-gathering object
+ * @final: the final boolean to be set
+ */
+static inline void dpaa2_sg_set_final(struct dpaa2_sg_entry *sg, bool final)
+{
+ sg->format_offset &= cpu_to_le16((~(SG_FINAL_FLAG_MASK
+ << SG_FINAL_FLAG_SHIFT)) & 0xFFFF);
+ sg->format_offset |= cpu_to_le16(final << SG_FINAL_FLAG_SHIFT);
+}
+
+#endif /* __FSL_DPAA2_FD_H */
diff --git a/include/soc/fsl/dpaa2-global.h b/include/soc/fsl/dpaa2-global.h
new file mode 100644
index 0000000..9bc0713
--- /dev/null
+++ b/include/soc/fsl/dpaa2-global.h
@@ -0,0 +1,177 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright 2014-2016 Freescale Semiconductor Inc.
+ * Copyright 2016 NXP
+ *
+ */
+#ifndef __FSL_DPAA2_GLOBAL_H
+#define __FSL_DPAA2_GLOBAL_H
+
+#include <linux/types.h>
+#include <linux/cpumask.h>
+#include "dpaa2-fd.h"
+
+struct dpaa2_dq {
+ union {
+ struct common {
+ u8 verb;
+ u8 reserved[63];
+ } common;
+ struct dq {
+ u8 verb;
+ u8 stat;
+ __le16 seqnum;
+ __le16 oprid;
+ u8 reserved;
+ u8 tok;
+ __le32 fqid;
+ u32 reserved2;
+ __le32 fq_byte_cnt;
+ __le32 fq_frm_cnt;
+ __le64 fqd_ctx;
+ u8 fd[32];
+ } dq;
+ struct scn {
+ u8 verb;
+ u8 stat;
+ u8 state;
+ u8 reserved;
+ __le32 rid_tok;
+ __le64 ctx;
+ } scn;
+ };
+};
+
+/* Parsing frame dequeue results */
+/* FQ empty */
+#define DPAA2_DQ_STAT_FQEMPTY 0x80
+/* FQ held active */
+#define DPAA2_DQ_STAT_HELDACTIVE 0x40
+/* FQ force eligible */
+#define DPAA2_DQ_STAT_FORCEELIGIBLE 0x20
+/* valid frame */
+#define DPAA2_DQ_STAT_VALIDFRAME 0x10
+/* FQ ODP enable */
+#define DPAA2_DQ_STAT_ODPVALID 0x04
+/* volatile dequeue */
+#define DPAA2_DQ_STAT_VOLATILE 0x02
+/* volatile dequeue command is expired */
+#define DPAA2_DQ_STAT_EXPIRED 0x01
+
+#define DQ_FQID_MASK 0x00FFFFFF
+#define DQ_FRAME_COUNT_MASK 0x00FFFFFF
+
+/**
+ * dpaa2_dq_flags() - Get the stat field of dequeue response
+ * @dq: the dequeue result.
+ */
+static inline u32 dpaa2_dq_flags(const struct dpaa2_dq *dq)
+{
+ return dq->dq.stat;
+}
+
+/**
+ * dpaa2_dq_is_pull() - Check whether the dq response is from a pull
+ * command.
+ * @dq: the dequeue result
+ *
+ * Return 1 for volatile(pull) dequeue, 0 for static dequeue.
+ */
+static inline int dpaa2_dq_is_pull(const struct dpaa2_dq *dq)
+{
+ return (int)(dpaa2_dq_flags(dq) & DPAA2_DQ_STAT_VOLATILE);
+}
+
+/**
+ * dpaa2_dq_is_pull_complete() - Check whether the pull command is completed.
+ * @dq: the dequeue result
+ *
+ * Return boolean.
+ */
+static inline bool dpaa2_dq_is_pull_complete(const struct dpaa2_dq *dq)
+{
+ return !!(dpaa2_dq_flags(dq) & DPAA2_DQ_STAT_EXPIRED);
+}
+
+/**
+ * dpaa2_dq_seqnum() - Get the seqnum field in dequeue response
+ * @dq: the dequeue result
+ *
+ * seqnum is valid only if VALIDFRAME flag is TRUE
+ *
+ * Return seqnum.
+ */
+static inline u16 dpaa2_dq_seqnum(const struct dpaa2_dq *dq)
+{
+ return le16_to_cpu(dq->dq.seqnum);
+}
+
+/**
+ * dpaa2_dq_odpid() - Get the odpid field in dequeue response
+ * @dq: the dequeue result
+ *
+ * odpid is valid only if ODPVALID flag is TRUE.
+ *
+ * Return odpid.
+ */
+static inline u16 dpaa2_dq_odpid(const struct dpaa2_dq *dq)
+{
+ return le16_to_cpu(dq->dq.oprid);
+}
+
+/**
+ * dpaa2_dq_fqid() - Get the fqid in dequeue response
+ * @dq: the dequeue result
+ *
+ * Return fqid.
+ */
+static inline u32 dpaa2_dq_fqid(const struct dpaa2_dq *dq)
+{
+ return le32_to_cpu(dq->dq.fqid) & DQ_FQID_MASK;
+}
+
+/**
+ * dpaa2_dq_byte_count() - Get the byte count in dequeue response
+ * @dq: the dequeue result
+ *
+ * Return the byte count remaining in the FQ.
+ */
+static inline u32 dpaa2_dq_byte_count(const struct dpaa2_dq *dq)
+{
+ return le32_to_cpu(dq->dq.fq_byte_cnt);
+}
+
+/**
+ * dpaa2_dq_frame_count() - Get the frame count in dequeue response
+ * @dq: the dequeue result
+ *
+ * Return the frame count remaining in the FQ.
+ */
+static inline u32 dpaa2_dq_frame_count(const struct dpaa2_dq *dq)
+{
+ return le32_to_cpu(dq->dq.fq_frm_cnt) & DQ_FRAME_COUNT_MASK;
+}
+
+/**
+ * dpaa2_dq_fd_ctx() - Get the frame queue context in dequeue response
+ * @dq: the dequeue result
+ *
+ * Return the frame queue context.
+ */
+static inline u64 dpaa2_dq_fqd_ctx(const struct dpaa2_dq *dq)
+{
+ return le64_to_cpu(dq->dq.fqd_ctx);
+}
+
+/**
+ * dpaa2_dq_fd() - Get the frame descriptor in dequeue response
+ * @dq: the dequeue result
+ *
+ * Return the frame descriptor.
+ */
+static inline const struct dpaa2_fd *dpaa2_dq_fd(const struct dpaa2_dq *dq)
+{
+ return (const struct dpaa2_fd *)&dq->dq.fd[0];
+}
+
+#endif /* __FSL_DPAA2_GLOBAL_H */
diff --git a/include/soc/fsl/dpaa2-io.h b/include/soc/fsl/dpaa2-io.h
new file mode 100644
index 0000000..f71227d
--- /dev/null
+++ b/include/soc/fsl/dpaa2-io.h
@@ -0,0 +1,115 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright 2014-2016 Freescale Semiconductor Inc.
+ * Copyright NXP
+ *
+ */
+#ifndef __FSL_DPAA2_IO_H
+#define __FSL_DPAA2_IO_H
+
+#include <linux/types.h>
+#include <linux/cpumask.h>
+#include <linux/irqreturn.h>
+
+#include "dpaa2-fd.h"
+#include "dpaa2-global.h"
+
+struct dpaa2_io;
+struct dpaa2_io_store;
+struct device;
+
+/**
+ * DOC: DPIO Service
+ *
+ * The DPIO service provides APIs for users to interact with the datapath
+ * by enqueueing and dequeing frame descriptors.
+ *
+ * The following set of APIs can be used to enqueue and dequeue frames
+ * as well as producing notification callbacks when data is available
+ * for dequeue.
+ */
+
+#define DPAA2_IO_ANY_CPU -1
+
+/**
+ * struct dpaa2_io_desc - The DPIO descriptor
+ * @receives_notifications: Use notificaton mode. Non-zero if the DPIO
+ * has a channel.
+ * @has_8prio: Set to non-zero for channel with 8 priority WQs. Ignored
+ * unless receives_notification is TRUE.
+ * @cpu: The cpu index that at least interrupt handlers will
+ * execute on.
+ * @stash_affinity: The stash affinity for this portal favour 'cpu'
+ * @regs_cena: The cache enabled regs.
+ * @regs_cinh: The cache inhibited regs
+ * @dpio_id: The dpio index
+ * @qman_version: The qman version
+ *
+ * Describes the attributes and features of the DPIO object.
+ */
+struct dpaa2_io_desc {
+ int receives_notifications;
+ int has_8prio;
+ int cpu;
+ void *regs_cena;
+ void *regs_cinh;
+ int dpio_id;
+ u32 qman_version;
+};
+
+struct dpaa2_io *dpaa2_io_create(const struct dpaa2_io_desc *desc);
+
+void dpaa2_io_down(struct dpaa2_io *d);
+
+irqreturn_t dpaa2_io_irq(struct dpaa2_io *obj);
+
+struct dpaa2_io *dpaa2_io_service_select(int cpu);
+
+/**
+ * struct dpaa2_io_notification_ctx - The DPIO notification context structure
+ * @cb: The callback to be invoked when the notification arrives
+ * @is_cdan: Zero for FQDAN, non-zero for CDAN
+ * @id: FQID or channel ID, needed for rearm
+ * @desired_cpu: The cpu on which the notifications will show up. Use
+ * DPAA2_IO_ANY_CPU if don't care
+ * @dpio_id: The dpio index
+ * @qman64: The 64-bit context value shows up in the FQDAN/CDAN.
+ * @node: The list node
+ * @dpio_private: The dpio object internal to dpio_service
+ *
+ * Used when a FQDAN/CDAN registration is made by drivers.
+ */
+struct dpaa2_io_notification_ctx {
+ void (*cb)(struct dpaa2_io_notification_ctx *ctx);
+ int is_cdan;
+ u32 id;
+ int desired_cpu;
+ int dpio_id;
+ u64 qman64;
+ struct list_head node;
+ void *dpio_private;
+};
+
+int dpaa2_io_service_register(struct dpaa2_io *service,
+ struct dpaa2_io_notification_ctx *ctx);
+void dpaa2_io_service_deregister(struct dpaa2_io *service,
+ struct dpaa2_io_notification_ctx *ctx);
+int dpaa2_io_service_rearm(struct dpaa2_io *service,
+ struct dpaa2_io_notification_ctx *ctx);
+
+int dpaa2_io_service_pull_channel(struct dpaa2_io *d, u32 channelid,
+ struct dpaa2_io_store *s);
+
+int dpaa2_io_service_enqueue_qd(struct dpaa2_io *d, u32 qdid, u8 prio,
+ u16 qdbin, const struct dpaa2_fd *fd);
+int dpaa2_io_service_release(struct dpaa2_io *d, u32 bpid,
+ const u64 *buffers, unsigned int num_buffers);
+int dpaa2_io_service_acquire(struct dpaa2_io *d, u32 bpid,
+ u64 *buffers, unsigned int num_buffers);
+
+struct dpaa2_io_store *dpaa2_io_store_create(unsigned int max_frames,
+ struct device *dev);
+void dpaa2_io_store_destroy(struct dpaa2_io_store *s);
+struct dpaa2_dq *dpaa2_io_store_next(struct dpaa2_io_store *s, int *is_last);
+
+#endif /* __FSL_DPAA2_IO_H */
--
2.7.4

Next message: Thomas Gleixner: "Re: [PATCH 2/2] x86/mm: remove pointless checks in vmalloc_fault"
Previous message: Joe Lawrence: "Re: [PATCH 1/2] livepatch: Initialize shadow variables by init function safely"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]