Re: [PATCH RFC 1/2] drivers/edac: Add L1 and L2 error detection for A53 and A57

[Borislav Petkov]

On Wed, Mar 14, 2018 at 05:17:46PM -0700, York Sun wrote:
> Add error detection for A53 and A57 cores. Hardware error injection
> is supported on A53. Software error injection is supported on both.
> For hardware error injection on A53 to work, proper access to
> L2ACTLR_EL1, CPUACTLR_EL1 needs to be granted by EL3 firmware. This
> is done by making an SMC call in the driver. Failure to enable access
> disables hardware error injection. For error interrupt to work,
> another SMC call enables access to L2ECTLR_EL1. Failure to enable
> access disables interrupt for error reporting.
> 
> Signed-off-by: York Sun <york.sun@xxxxxxx>
> ---
>  .../devicetree/bindings/edac/cortex-arm64-edac.txt |  37 +
>  arch/arm64/include/asm/cacheflush.h                |   1 +
>  arch/arm64/mm/cache.S                              |  35 +
>  drivers/edac/Kconfig                               |   6 +
>  drivers/edac/Makefile                              |   1 +
>  drivers/edac/cortex_arm64_l1_l2.c                  | 741 +++++++++++++++++++++

I don't want per-functional unit EDAC drivers. Also, what happened to
talking to ARM people about designing a generic ARM64 EDAC driver?

If this is going to be it, then it should be called edac_arm64.c and it
should contain all the architectural RAS functionality in it.

-- 
Regards/Gruss,
    Boris.

Good mailing practices for 400: avoid top-posting and trim the reply.