[PATCH, RFC] block: remove the paride drivers

From: Christoph Hellwig
Date: Thu Mar 15 2018 - 03:53:19 EST

Next message: Richard Weinberger: "Re: [PATCH 2/2 v2] mtd: ubi: use put_device() if device_register fail"
Previous message: Sergey Senozhatsky: "Re: linux-next: manual merge of the printk tree with the asm-generic tree"
Next in thread: Ondrej Zary: "Re: [PATCH, RFC] block: remove the paride drivers"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

The paride drivers are some of the cruftiest, grottiest block drivers
(besides drivers/ide and floppy.c) and have seen one single targeted
commit since the dawn of git in 2007. Drop them to make block layer
improvements easier.

Signed-off-by: Christoph Hellwig <hch@xxxxxx>
---
Documentation/admin-guide/kernel-parameters.txt | 16 -
Documentation/blockdev/00-INDEX | 2 -
Documentation/blockdev/paride.txt | 417 ---------
drivers/Makefile | 1 -
drivers/block/Kconfig | 29 -
drivers/block/paride/Kconfig | 303 -------
drivers/block/paride/Makefile | 29 -
drivers/block/paride/Transition-notes | 128 ---
drivers/block/paride/aten.c | 162 ----
drivers/block/paride/bpck.c | 477 -----------
drivers/block/paride/bpck6.c | 267 ------
drivers/block/paride/comm.c | 218 -----
drivers/block/paride/dstr.c | 233 -----
drivers/block/paride/epat.c | 340 --------
drivers/block/paride/epia.c | 316 -------
drivers/block/paride/fit2.c | 151 ----
drivers/block/paride/fit3.c | 211 -----
drivers/block/paride/friq.c | 276 ------
drivers/block/paride/frpw.c | 313 -------
drivers/block/paride/kbic.c | 305 -------
drivers/block/paride/ktti.c | 128 ---
drivers/block/paride/mkd | 31 -
drivers/block/paride/on20.c | 153 ----
drivers/block/paride/on26.c | 319 -------
drivers/block/paride/paride.c | 479 -----------
drivers/block/paride/paride.h | 172 ----
drivers/block/paride/pcd.c | 1022 ----------------------
drivers/block/paride/pd.c | 981 ---------------------
drivers/block/paride/pf.c | 1034 -----------------------
drivers/block/paride/pg.c | 734 ----------------
drivers/block/paride/ppc6lnx.c | 726 ----------------
drivers/block/paride/pseudo.h | 102 ---
drivers/block/paride/pt.c | 1024 ----------------------
33 files changed, 11099 deletions(-)
delete mode 100644 Documentation/blockdev/paride.txt
delete mode 100644 drivers/block/paride/Kconfig
delete mode 100644 drivers/block/paride/Makefile
delete mode 100644 drivers/block/paride/Transition-notes
delete mode 100644 drivers/block/paride/aten.c
delete mode 100644 drivers/block/paride/bpck.c
delete mode 100644 drivers/block/paride/bpck6.c
delete mode 100644 drivers/block/paride/comm.c
delete mode 100644 drivers/block/paride/dstr.c
delete mode 100644 drivers/block/paride/epat.c
delete mode 100644 drivers/block/paride/epia.c
delete mode 100644 drivers/block/paride/fit2.c
delete mode 100644 drivers/block/paride/fit3.c
delete mode 100644 drivers/block/paride/friq.c
delete mode 100644 drivers/block/paride/frpw.c
delete mode 100644 drivers/block/paride/kbic.c
delete mode 100644 drivers/block/paride/ktti.c
delete mode 100644 drivers/block/paride/mkd
delete mode 100644 drivers/block/paride/on20.c
delete mode 100644 drivers/block/paride/on26.c
delete mode 100644 drivers/block/paride/paride.c
delete mode 100644 drivers/block/paride/paride.h
delete mode 100644 drivers/block/paride/pcd.c
delete mode 100644 drivers/block/paride/pd.c
delete mode 100644 drivers/block/paride/pf.c
delete mode 100644 drivers/block/paride/pg.c
delete mode 100644 drivers/block/paride/ppc6lnx.c
delete mode 100644 drivers/block/paride/pseudo.h
delete mode 100644 drivers/block/paride/pt.c

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 1d1d53f85ddd..7fe0903387d2 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -2945,10 +2945,6 @@

pcbit= [HW,ISDN]

- pcd. [PARIDE]
- See header of drivers/block/paride/pcd.c.
- See also Documentation/blockdev/paride.txt.
-
pci=option[,option...] [PCI] various PCI subsystem options:
earlydump [X86] dump PCI config space before the kernel
changes anything
@@ -3160,9 +3156,6 @@
for debug and development, but should not be
needed on a platform with proper driver support.

- pd. [PARIDE]
- See Documentation/blockdev/paride.txt.
-
pdcchassis= [PARISC,HW] Disable/Enable PDC Chassis Status codes at
boot time.
Format: { 0 | 1 }
@@ -3175,12 +3168,6 @@
allocator. This parameter is primarily for debugging
and performance comparison.

- pf. [PARIDE]
- See Documentation/blockdev/paride.txt.
-
- pg. [PARIDE]
- See Documentation/blockdev/paride.txt.
-
pirq= [SMP,APIC] Manual mp-table setup
See Documentation/x86/i386/IO-APIC.txt.

@@ -3308,9 +3295,6 @@

pstore.backend= Specify the name of the pstore backend to use

- pt. [PARIDE]
- See Documentation/blockdev/paride.txt.
-
pti= [X86_64] Control Page Table Isolation of user and
kernel address spaces. Disabling this feature
removes hardening, but improves performance of
diff --git a/Documentation/blockdev/00-INDEX b/Documentation/blockdev/00-INDEX
index c08df56dd91b..e6ee10f8ad3b 100644
--- a/Documentation/blockdev/00-INDEX
+++ b/Documentation/blockdev/00-INDEX
@@ -12,7 +12,5 @@ mflash.txt
- info on mGine m(g)flash driver for linux.
nbd.txt
- info on a TCP implementation of a network block device.
-paride.txt
- - information about the parallel port IDE subsystem.
ramdisk.txt
- short guide on how to set up and use the RAM disk.
diff --git a/Documentation/blockdev/paride.txt b/Documentation/blockdev/paride.txt
deleted file mode 100644
index ee6717e3771d..000000000000
--- a/Documentation/blockdev/paride.txt
+++ /dev/null
@@ -1,417 +0,0 @@
-
- Linux and parallel port IDE devices
-
-PARIDE v1.03 (c) 1997-8 Grant Guenther <grant@xxxxxxxxxx>
-
-1. Introduction
-
-Owing to the simplicity and near universality of the parallel port interface
-to personal computers, many external devices such as portable hard-disk,
-CD-ROM, LS-120 and tape drives use the parallel port to connect to their
-host computer. While some devices (notably scanners) use ad-hoc methods
-to pass commands and data through the parallel port interface, most
-external devices are actually identical to an internal model, but with
-a parallel-port adapter chip added in. Some of the original parallel port
-adapters were little more than mechanisms for multiplexing a SCSI bus.
-(The Iomega PPA-3 adapter used in the ZIP drives is an example of this
-approach). Most current designs, however, take a different approach.
-The adapter chip reproduces a small ISA or IDE bus in the external device
-and the communication protocol provides operations for reading and writing
-device registers, as well as data block transfer functions. Sometimes,
-the device being addressed via the parallel cable is a standard SCSI
-controller like an NCR 5380. The "ditto" family of external tape
-drives use the ISA replicator to interface a floppy disk controller,
-which is then connected to a floppy-tape mechanism. The vast majority
-of external parallel port devices, however, are now based on standard
-IDE type devices, which require no intermediate controller. If one
-were to open up a parallel port CD-ROM drive, for instance, one would
-find a standard ATAPI CD-ROM drive, a power supply, and a single adapter
-that interconnected a standard PC parallel port cable and a standard
-IDE cable. It is usually possible to exchange the CD-ROM device with
-any other device using the IDE interface.
-
-The document describes the support in Linux for parallel port IDE
-devices. It does not cover parallel port SCSI devices, "ditto" tape
-drives or scanners. Many different devices are supported by the
-parallel port IDE subsystem, including:
-
- MicroSolutions backpack CD-ROM
- MicroSolutions backpack PD/CD
- MicroSolutions backpack hard-drives
- MicroSolutions backpack 8000t tape drive
- SyQuest EZ-135, EZ-230 & SparQ drives
- Avatar Shark
- Imation Superdisk LS-120
- Maxell Superdisk LS-120
- FreeCom Power CD
- Hewlett-Packard 5GB and 8GB tape drives
- Hewlett-Packard 7100 and 7200 CD-RW drives
-
-as well as most of the clone and no-name products on the market.
-
-To support such a wide range of devices, PARIDE, the parallel port IDE
-subsystem, is actually structured in three parts. There is a base
-paride module which provides a registry and some common methods for
-accessing the parallel ports. The second component is a set of
-high-level drivers for each of the different types of supported devices:
-
- pd IDE disk
- pcd ATAPI CD-ROM
- pf ATAPI disk
- pt ATAPI tape
- pg ATAPI generic
-
-(Currently, the pg driver is only used with CD-R drives).
-
-The high-level drivers function according to the relevant standards.
-The third component of PARIDE is a set of low-level protocol drivers
-for each of the parallel port IDE adapter chips. Thanks to the interest
-and encouragement of Linux users from many parts of the world,
-support is available for almost all known adapter protocols:
-
- aten ATEN EH-100 (HK)
- bpck Microsolutions backpack (US)
- comm DataStor (old-type) "commuter" adapter (TW)
- dstr DataStor EP-2000 (TW)
- epat Shuttle EPAT (UK)
- epia Shuttle EPIA (UK)
- fit2 FIT TD-2000 (US)
- fit3 FIT TD-3000 (US)
- friq Freecom IQ cable (DE)
- frpw Freecom Power (DE)
- kbic KingByte KBIC-951A and KBIC-971A (TW)
- ktti KT Technology PHd adapter (SG)
- on20 OnSpec 90c20 (US)
- on26 OnSpec 90c26 (US)
-
-
-2. Using the PARIDE subsystem
-
-While configuring the Linux kernel, you may choose either to build
-the PARIDE drivers into your kernel, or to build them as modules.
-
-In either case, you will need to select "Parallel port IDE device support"
-as well as at least one of the high-level drivers and at least one
-of the parallel port communication protocols. If you do not know
-what kind of parallel port adapter is used in your drive, you could
-begin by checking the file names and any text files on your DOS
-installation floppy. Alternatively, you can look at the markings on
-the adapter chip itself. That's usually sufficient to identify the
-correct device.
-
-You can actually select all the protocol modules, and allow the PARIDE
-subsystem to try them all for you.
-
-For the "brand-name" products listed above, here are the protocol
-and high-level drivers that you would use:
-
- Manufacturer Model Driver Protocol
-
- MicroSolutions CD-ROM pcd bpck
- MicroSolutions PD drive pf bpck
- MicroSolutions hard-drive pd bpck
- MicroSolutions 8000t tape pt bpck
- SyQuest EZ, SparQ pd epat
- Imation Superdisk pf epat
- Maxell Superdisk pf friq
- Avatar Shark pd epat
- FreeCom CD-ROM pcd frpw
- Hewlett-Packard 5GB Tape pt epat
- Hewlett-Packard 7200e (CD) pcd epat
- Hewlett-Packard 7200e (CD-R) pg epat
-
-2.1 Configuring built-in drivers
-
-We recommend that you get to know how the drivers work and how to
-configure them as loadable modules, before attempting to compile a
-kernel with the drivers built-in.
-
-If you built all of your PARIDE support directly into your kernel,
-and you have just a single parallel port IDE device, your kernel should
-locate it automatically for you. If you have more than one device,
-you may need to give some command line options to your bootloader
-(eg: LILO), how to do that is beyond the scope of this document.
-
-The high-level drivers accept a number of command line parameters, all
-of which are documented in the source files in linux/drivers/block/paride.
-By default, each driver will automatically try all parallel ports it
-can find, and all protocol types that have been installed, until it finds
-a parallel port IDE adapter. Once it finds one, the probe stops. So,
-if you have more than one device, you will need to tell the drivers
-how to identify them. This requires specifying the port address, the
-protocol identification number and, for some devices, the drive's
-chain ID. While your system is booting, a number of messages are
-displayed on the console. Like all such messages, they can be
-reviewed with the 'dmesg' command. Among those messages will be
-some lines like:
-
- paride: bpck registered as protocol 0
- paride: epat registered as protocol 1
-
-The numbers will always be the same until you build a new kernel with
-different protocol selections. You should note these numbers as you
-will need them to identify the devices.
-
-If you happen to be using a MicroSolutions backpack device, you will
-also need to know the unit ID number for each drive. This is usually
-the last two digits of the drive's serial number (but read MicroSolutions'
-documentation about this).
-
-As an example, let's assume that you have a MicroSolutions PD/CD drive
-with unit ID number 36 connected to the parallel port at 0x378, a SyQuest
-EZ-135 connected to the chained port on the PD/CD drive and also an
-Imation Superdisk connected to port 0x278. You could give the following
-options on your boot command:
-
- pd.drive0=0x378,1 pf.drive0=0x278,1 pf.drive1=0x378,0,36
-
-In the last option, pf.drive1 configures device /dev/pf1, the 0x378
-is the parallel port base address, the 0 is the protocol registration
-number and 36 is the chain ID.
-
-Please note: while PARIDE will work both with and without the
-PARPORT parallel port sharing system that is included by the
-"Parallel port support" option, PARPORT must be included and enabled
-if you want to use chains of devices on the same parallel port.
-
-2.2 Loading and configuring PARIDE as modules
-
-It is much faster and simpler to get to understand the PARIDE drivers
-if you use them as loadable kernel modules.
-
-Note 1: using these drivers with the "kerneld" automatic module loading
-system is not recommended for beginners, and is not documented here.
-
-Note 2: if you build PARPORT support as a loadable module, PARIDE must
-also be built as loadable modules, and PARPORT must be loaded before the
-PARIDE modules.
-
-To use PARIDE, you must begin by
-
- insmod paride
-
-this loads a base module which provides a registry for the protocols,
-among other tasks.
-
-Then, load as many of the protocol modules as you think you might need.
-As you load each module, it will register the protocols that it supports,
-and print a log message to your kernel log file and your console. For
-example:
-
- # insmod epat
- paride: epat registered as protocol 0
- # insmod kbic
- paride: k951 registered as protocol 1
- paride: k971 registered as protocol 2
-
-Finally, you can load high-level drivers for each kind of device that
-you have connected. By default, each driver will autoprobe for a single
-device, but you can support up to four similar devices by giving their
-individual co-ordinates when you load the driver.
-
-For example, if you had two no-name CD-ROM drives both using the
-KingByte KBIC-951A adapter, one on port 0x378 and the other on 0x3bc
-you could give the following command:
-
- # insmod pcd drive0=0x378,1 drive1=0x3bc,1
-
-For most adapters, giving a port address and protocol number is sufficient,
-but check the source files in linux/drivers/block/paride for more
-information. (Hopefully someone will write some man pages one day !).
-
-As another example, here's what happens when PARPORT is installed, and
-a SyQuest EZ-135 is attached to port 0x378:
-
- # insmod paride
- paride: version 1.0 installed
- # insmod epat
- paride: epat registered as protocol 0
- # insmod pd
- pd: pd version 1.0, major 45, cluster 64, nice 0
- pda: Sharing parport1 at 0x378
- pda: epat 1.0, Shuttle EPAT chip c3 at 0x378, mode 5 (EPP-32), delay 1
- pda: SyQuest EZ135A, 262144 blocks [128M], (512/16/32), removable media
- pda: pda1
-
-Note that the last line is the output from the generic partition table
-scanner - in this case it reports that it has found a disk with one partition.
-
-2.3 Using a PARIDE device
-
-Once the drivers have been loaded, you can access PARIDE devices in the
-same way as their traditional counterparts. You will probably need to
-create the device "special files". Here is a simple script that you can
-cut to a file and execute:
-
-#!/bin/bash
-#
-# mkd -- a script to create the device special files for the PARIDE subsystem
-#
-function mkdev {
- mknod $1 $2 $3 $4 ; chmod 0660 $1 ; chown root:disk $1
-}
-#
-function pd {
- D=$( printf \\$( printf "x%03x" $[ $1 + 97 ] ) )
- mkdev pd$D b 45 $[ $1 * 16 ]
- for P in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
- do mkdev pd$D$P b 45 $[ $1 * 16 + $P ]
- done
-}
-#
-cd /dev
-#
-for u in 0 1 2 3 ; do pd $u ; done
-for u in 0 1 2 3 ; do mkdev pcd$u b 46 $u ; done
-for u in 0 1 2 3 ; do mkdev pf$u b 47 $u ; done
-for u in 0 1 2 3 ; do mkdev pt$u c 96 $u ; done
-for u in 0 1 2 3 ; do mkdev npt$u c 96 $[ $u + 128 ] ; done
-for u in 0 1 2 3 ; do mkdev pg$u c 97 $u ; done
-#
-# end of mkd
-
-With the device files and drivers in place, you can access PARIDE devices
-like any other Linux device. For example, to mount a CD-ROM in pcd0, use:
-
- mount /dev/pcd0 /cdrom
-
-If you have a fresh Avatar Shark cartridge, and the drive is pda, you
-might do something like:
-
- fdisk /dev/pda -- make a new partition table with
- partition 1 of type 83
-
- mke2fs /dev/pda1 -- to build the file system
-
- mkdir /shark -- make a place to mount the disk
-
- mount /dev/pda1 /shark
-
-Devices like the Imation superdisk work in the same way, except that
-they do not have a partition table. For example to make a 120MB
-floppy that you could share with a DOS system:
-
- mkdosfs /dev/pf0
- mount /dev/pf0 /mnt
-
-
-2.4 The pf driver
-
-The pf driver is intended for use with parallel port ATAPI disk
-devices. The most common devices in this category are PD drives
-and LS-120 drives. Traditionally, media for these devices are not
-partitioned. Consequently, the pf driver does not support partitioned
-media. This may be changed in a future version of the driver.
-
-2.5 Using the pt driver
-
-The pt driver for parallel port ATAPI tape drives is a minimal driver.
-It does not yet support many of the standard tape ioctl operations.
-For best performance, a block size of 32KB should be used. You will
-probably want to set the parallel port delay to 0, if you can.
-
-2.6 Using the pg driver
-
-The pg driver can be used in conjunction with the cdrecord program
-to create CD-ROMs. Please get cdrecord version 1.6.1 or later
-from ftp://ftp.fokus.gmd.de/pub/unix/cdrecord/ . To record CD-R media
-your parallel port should ideally be set to EPP mode, and the "port delay"
-should be set to 0. With those settings it is possible to record at 2x
-speed without any buffer underruns. If you cannot get the driver to work
-in EPP mode, try to use "bidirectional" or "PS/2" mode and 1x speeds only.
-
-
-3. Troubleshooting
-
-3.1 Use EPP mode if you can
-
-The most common problems that people report with the PARIDE drivers
-concern the parallel port CMOS settings. At this time, none of the
-PARIDE protocol modules support ECP mode, or any ECP combination modes.
-If you are able to do so, please set your parallel port into EPP mode
-using your CMOS setup procedure.
-
-3.2 Check the port delay
-
-Some parallel ports cannot reliably transfer data at full speed. To
-offset the errors, the PARIDE protocol modules introduce a "port
-delay" between each access to the i/o ports. Each protocol sets
-a default value for this delay. In most cases, the user can override
-the default and set it to 0 - resulting in somewhat higher transfer
-rates. In some rare cases (especially with older 486 systems) the
-default delays are not long enough. if you experience corrupt data
-transfers, or unexpected failures, you may wish to increase the
-port delay. The delay can be programmed using the "driveN" parameters
-to each of the high-level drivers. Please see the notes above, or
-read the comments at the beginning of the driver source files in
-linux/drivers/block/paride.
-
-3.3 Some drives need a printer reset
-
-There appear to be a number of "noname" external drives on the market
-that do not always power up correctly. We have noticed this with some
-drives based on OnSpec and older Freecom adapters. In these rare cases,
-the adapter can often be reinitialised by issuing a "printer reset" on
-the parallel port. As the reset operation is potentially disruptive in
-multiple device environments, the PARIDE drivers will not do it
-automatically. You can however, force a printer reset by doing:
-
- insmod lp reset=1
- rmmod lp
-
-If you have one of these marginal cases, you should probably build
-your paride drivers as modules, and arrange to do the printer reset
-before loading the PARIDE drivers.
-
-3.4 Use the verbose option and dmesg if you need help
-
-While a lot of testing has gone into these drivers to make them work
-as smoothly as possible, problems will arise. If you do have problems,
-please check all the obvious things first: does the drive work in
-DOS with the manufacturer's drivers ? If that doesn't yield any useful
-clues, then please make sure that only one drive is hooked to your system,
-and that either (a) PARPORT is enabled or (b) no other device driver
-is using your parallel port (check in /proc/ioports). Then, load the
-appropriate drivers (you can load several protocol modules if you want)
-as in:
-
- # insmod paride
- # insmod epat
- # insmod bpck
- # insmod kbic
- ...
- # insmod pd verbose=1
-
-(using the correct driver for the type of device you have, of course).
-The verbose=1 parameter will cause the drivers to log a trace of their
-activity as they attempt to locate your drive.
-
-Use 'dmesg' to capture a log of all the PARIDE messages (any messages
-beginning with paride:, a protocol module's name or a driver's name) and
-include that with your bug report. You can submit a bug report in one
-of two ways. Either send it directly to the author of the PARIDE suite,
-by e-mail to grant@xxxxxxxxxx, or join the linux-parport mailing list
-and post your report there.
-
-3.5 For more information or help
-
-You can join the linux-parport mailing list by sending a mail message
-to
- linux-parport-request@xxxxxxxxxx
-
-with the single word
-
- subscribe
-
-in the body of the mail message (not in the subject line). Please be
-sure that your mail program is correctly set up when you do this, as
-the list manager is a robot that will subscribe you using the reply
-address in your mail headers. REMOVE any anti-spam gimmicks you may
-have in your mail headers, when sending mail to the list server.
-
-You might also find some useful information on the linux-parport
-web pages (although they are not always up to date) at
-
- http://web.archive.org/web/*/http://www.torque.net/parport/
-
-
diff --git a/drivers/Makefile b/drivers/Makefile
index 24cd47014657..feaf5ab7e92c 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -98,7 +98,6 @@ obj-$(CONFIG_DIO) += dio/
obj-$(CONFIG_SBUS) += sbus/
obj-$(CONFIG_ZORRO) += zorro/
obj-$(CONFIG_ATA_OVER_ETH) += block/aoe/
-obj-$(CONFIG_PARIDE) += block/paride/
obj-$(CONFIG_TC) += tc/
obj-$(CONFIG_UWB) += uwb/
obj-$(CONFIG_USB_PHY) += usb/
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index ad9b687a236a..7089e64cdde4 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -88,35 +88,6 @@ config GDROM
Most users will want to say "Y" here.
You can also build this as a module which will be called gdrom.

-config PARIDE
- tristate "Parallel port IDE device support"
- depends on PARPORT_PC
- ---help---
- There are many external CD-ROM and disk devices that connect through
- your computer's parallel port. Most of them are actually IDE devices
- using a parallel port IDE adapter. This option enables the PARIDE
- subsystem which contains drivers for many of these external drives.
- Read <file:Documentation/blockdev/paride.txt> for more information.
-
- If you have said Y to the "Parallel-port support" configuration
- option, you may share a single port between your printer and other
- parallel port devices. Answer Y to build PARIDE support into your
- kernel, or M if you would like to build it as a loadable module. If
- your parallel port support is in a loadable module, you must build
- PARIDE as a module. If you built PARIDE support into your kernel,
- you may still build the individual protocol modules and high-level
- drivers as loadable modules. If you build this support as a module,
- it will be called paride.
-
- To use the PARIDE support, you must say Y or M here and also to at
- least one high-level driver (e.g. "Parallel port IDE disks",
- "Parallel port ATAPI CD-ROMs", "Parallel port ATAPI disks" etc.) and
- to at least one protocol driver (e.g. "ATEN EH-100 protocol",
- "MicroSolutions backpack protocol", "DataStor Commuter protocol"
- etc.).
-
-source "drivers/block/paride/Kconfig"
-
source "drivers/block/mtip32xx/Kconfig"

source "drivers/block/zram/Kconfig"
diff --git a/drivers/block/paride/Kconfig b/drivers/block/paride/Kconfig
deleted file mode 100644
index f8bd6ef3605a..000000000000
--- a/drivers/block/paride/Kconfig
+++ /dev/null
@@ -1,303 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# PARIDE configuration
-#
-# PARIDE doesn't need PARPORT, but if PARPORT is configured as a module,
-# PARIDE must also be a module.
-# PARIDE only supports PC style parports. Tough for USB or other parports...
-
-comment "Parallel IDE high-level drivers"
- depends on PARIDE
-
-config PARIDE_PD
- tristate "Parallel port IDE disks"
- depends on PARIDE
- help
- This option enables the high-level driver for IDE-type disk devices
- connected through a parallel port. If you chose to build PARIDE
- support into your kernel, you may answer Y here to build in the
- parallel port IDE driver, otherwise you should answer M to build
- it as a loadable module. The module will be called pd. You
- must also have at least one parallel port protocol driver in your
- system. Among the devices supported by this driver are the SyQuest
- EZ-135, EZ-230 and SparQ drives, the Avatar Shark and the backpack
- hard drives from MicroSolutions.
-
-config PARIDE_PCD
- tristate "Parallel port ATAPI CD-ROMs"
- depends on PARIDE
- select CDROM
- select BLK_SCSI_REQUEST # only for the generic cdrom code
- ---help---
- This option enables the high-level driver for ATAPI CD-ROM devices
- connected through a parallel port. If you chose to build PARIDE
- support into your kernel, you may answer Y here to build in the
- parallel port ATAPI CD-ROM driver, otherwise you should answer M to
- build it as a loadable module. The module will be called pcd. You
- must also have at least one parallel port protocol driver in your
- system. Among the devices supported by this driver are the
- MicroSolutions backpack CD-ROM drives and the Freecom Power CD. If
- you have such a CD-ROM drive, you should also say Y or M to "ISO
- 9660 CD-ROM file system support" below, because that's the file
- system used on CD-ROMs.
-
-config PARIDE_PF
- tristate "Parallel port ATAPI disks"
- depends on PARIDE
- help
- This option enables the high-level driver for ATAPI disk devices
- connected through a parallel port. If you chose to build PARIDE
- support into your kernel, you may answer Y here to build in the
- parallel port ATAPI disk driver, otherwise you should answer M
- to build it as a loadable module. The module will be called pf.
- You must also have at least one parallel port protocol driver in
- your system. Among the devices supported by this driver are the
- MicroSolutions backpack PD/CD drive and the Imation Superdisk
- LS-120 drive.
-
-config PARIDE_PT
- tristate "Parallel port ATAPI tapes"
- depends on PARIDE
- help
- This option enables the high-level driver for ATAPI tape devices
- connected through a parallel port. If you chose to build PARIDE
- support into your kernel, you may answer Y here to build in the
- parallel port ATAPI disk driver, otherwise you should answer M
- to build it as a loadable module. The module will be called pt.
- You must also have at least one parallel port protocol driver in
- your system. Among the devices supported by this driver is the
- parallel port version of the HP 5GB drive.
-
-config PARIDE_PG
- tristate "Parallel port generic ATAPI devices"
- depends on PARIDE
- ---help---
- This option enables a special high-level driver for generic ATAPI
- devices connected through a parallel port. The driver allows user
- programs, such as cdrtools, to send ATAPI commands directly to a
- device.
-
- If you chose to build PARIDE support into your kernel, you may
- answer Y here to build in the parallel port generic ATAPI driver,
- otherwise you should answer M to build it as a loadable module. The
- module will be called pg.
-
- You must also have at least one parallel port protocol driver in
- your system.
-
- This driver implements an API loosely related to the generic SCSI
- driver. See <file:include/linux/pg.h>. for details.
-
- You can obtain the most recent version of cdrtools from
- <ftp://ftp.berlios.de/pub/cdrecord/>. Versions 1.6.1a3 and
- later fully support this driver.
-
-comment "Parallel IDE protocol modules"
- depends on PARIDE
-
-config PARIDE_ATEN
- tristate "ATEN EH-100 protocol"
- depends on PARIDE
- help
- This option enables support for the ATEN EH-100 parallel port IDE
- protocol. This protocol is used in some inexpensive low performance
- parallel port kits made in Hong Kong. If you chose to build PARIDE
- support into your kernel, you may answer Y here to build in the
- protocol driver, otherwise you should answer M to build it as a
- loadable module. The module will be called aten. You must also
- have a high-level driver for the type of device that you want to
- support.
-
-config PARIDE_BPCK
- tristate "MicroSolutions backpack (Series 5) protocol"
- depends on PARIDE
- ---help---
- This option enables support for the Micro Solutions BACKPACK
- parallel port Series 5 IDE protocol. (Most BACKPACK drives made
- before 1999 were Series 5) Series 5 drives will NOT always have the
- Series noted on the bottom of the drive. Series 6 drivers will.
-
- In other words, if your BACKPACK drive doesn't say "Series 6" on the
- bottom, enable this option.
-
- If you chose to build PARIDE support into your kernel, you may
- answer Y here to build in the protocol driver, otherwise you should
- answer M to build it as a loadable module. The module will be
- called bpck. You must also have a high-level driver for the type
- of device that you want to support.
-
-config PARIDE_BPCK6
- tristate "MicroSolutions backpack (Series 6) protocol"
- depends on PARIDE && !64BIT
- ---help---
- This option enables support for the Micro Solutions BACKPACK
- parallel port Series 6 IDE protocol. (Most BACKPACK drives made
- after 1999 were Series 6) Series 6 drives will have the Series noted
- on the bottom of the drive. Series 5 drivers don't always have it
- noted.
-
- In other words, if your BACKPACK drive says "Series 6" on the
- bottom, enable this option.
-
- If you chose to build PARIDE support into your kernel, you may
- answer Y here to build in the protocol driver, otherwise you should
- answer M to build it as a loadable module. The module will be
- called bpck6. You must also have a high-level driver for the type
- of device that you want to support.
-
-config PARIDE_COMM
- tristate "DataStor Commuter protocol"
- depends on PARIDE
- help
- This option enables support for the Commuter parallel port IDE
- protocol from DataStor. If you chose to build PARIDE support
- into your kernel, you may answer Y here to build in the protocol
- driver, otherwise you should answer M to build it as a loadable
- module. The module will be called comm. You must also have
- a high-level driver for the type of device that you want to support.
-
-config PARIDE_DSTR
- tristate "DataStor EP-2000 protocol"
- depends on PARIDE
- help
- This option enables support for the EP-2000 parallel port IDE
- protocol from DataStor. If you chose to build PARIDE support
- into your kernel, you may answer Y here to build in the protocol
- driver, otherwise you should answer M to build it as a loadable
- module. The module will be called dstr. You must also have
- a high-level driver for the type of device that you want to support.
-
-config PARIDE_FIT2
- tristate "FIT TD-2000 protocol"
- depends on PARIDE
- help
- This option enables support for the TD-2000 parallel port IDE
- protocol from Fidelity International Technology. This is a simple
- (low speed) adapter that is used in some portable hard drives. If
- you chose to build PARIDE support into your kernel, you may answer Y
- here to build in the protocol driver, otherwise you should answer M
- to build it as a loadable module. The module will be called ktti.
- You must also have a high-level driver for the type of device that
- you want to support.
-
-config PARIDE_FIT3
- tristate "FIT TD-3000 protocol"
- depends on PARIDE
- help
- This option enables support for the TD-3000 parallel port IDE
- protocol from Fidelity International Technology. This protocol is
- used in newer models of their portable disk, CD-ROM and PD/CD
- devices. If you chose to build PARIDE support into your kernel, you
- may answer Y here to build in the protocol driver, otherwise you
- should answer M to build it as a loadable module. The module will be
- called fit3. You must also have a high-level driver for the type
- of device that you want to support.
-
-config PARIDE_EPAT
- tristate "Shuttle EPAT/EPEZ protocol"
- depends on PARIDE
- help
- This option enables support for the EPAT parallel port IDE protocol.
- EPAT is a parallel port IDE adapter manufactured by Shuttle
- Technology and widely used in devices from major vendors such as
- Hewlett-Packard, SyQuest, Imation and Avatar. If you chose to build
- PARIDE support into your kernel, you may answer Y here to build in
- the protocol driver, otherwise you should answer M to build it as a
- loadable module. The module will be called epat. You must also
- have a high-level driver for the type of device that you want to
- support.
-
-config PARIDE_EPATC8
- bool "Support c7/c8 chips"
- depends on PARIDE_EPAT
- help
- This option enables support for the newer Shuttle EP1284 (aka c7 and
- c8) chip. You need this if you are using any recent Imation SuperDisk
- (LS-120) drive.
-
-config PARIDE_EPIA
- tristate "Shuttle EPIA protocol"
- depends on PARIDE
- help
- This option enables support for the (obsolete) EPIA parallel port
- IDE protocol from Shuttle Technology. This adapter can still be
- found in some no-name kits. If you chose to build PARIDE support
- into your kernel, you may answer Y here to build in the protocol
- driver, otherwise you should answer M to build it as a loadable
- module. The module will be called epia. You must also have a
- high-level driver for the type of device that you want to support.
-
-config PARIDE_FRIQ
- tristate "Freecom IQ ASIC-2 protocol"
- depends on PARIDE
- help
- This option enables support for version 2 of the Freecom IQ parallel
- port IDE adapter. This adapter is used by the Maxell Superdisk
- drive. If you chose to build PARIDE support into your kernel, you
- may answer Y here to build in the protocol driver, otherwise you
- should answer M to build it as a loadable module. The module will be
- called friq. You must also have a high-level driver for the type
- of device that you want to support.
-
-config PARIDE_FRPW
- tristate "FreeCom power protocol"
- depends on PARIDE
- help
- This option enables support for the Freecom power parallel port IDE
- protocol. If you chose to build PARIDE support into your kernel, you
- may answer Y here to build in the protocol driver, otherwise you
- should answer M to build it as a loadable module. The module will be
- called frpw. You must also have a high-level driver for the type
- of device that you want to support.
-
-config PARIDE_KBIC
- tristate "KingByte KBIC-951A/971A protocols"
- depends on PARIDE
- help
- This option enables support for the KBIC-951A and KBIC-971A parallel
- port IDE protocols from KingByte Information Corp. KingByte's
- adapters appear in many no-name portable disk and CD-ROM products,
- especially in Europe. If you chose to build PARIDE support into your
- kernel, you may answer Y here to build in the protocol driver,
- otherwise you should answer M to build it as a loadable module. The
- module will be called kbic. You must also have a high-level driver
- for the type of device that you want to support.
-
-config PARIDE_KTTI
- tristate "KT PHd protocol"
- depends on PARIDE
- help
- This option enables support for the "PHd" parallel port IDE protocol
- from KT Technology. This is a simple (low speed) adapter that is
- used in some 2.5" portable hard drives. If you chose to build PARIDE
- support into your kernel, you may answer Y here to build in the
- protocol driver, otherwise you should answer M to build it as a
- loadable module. The module will be called ktti. You must also
- have a high-level driver for the type of device that you want to
- support.
-
-config PARIDE_ON20
- tristate "OnSpec 90c20 protocol"
- depends on PARIDE
- help
- This option enables support for the (obsolete) 90c20 parallel port
- IDE protocol from OnSpec (often marketed under the ValuStore brand
- name). If you chose to build PARIDE support into your kernel, you
- may answer Y here to build in the protocol driver, otherwise you
- should answer M to build it as a loadable module. The module will
- be called on20. You must also have a high-level driver for the
- type of device that you want to support.
-
-config PARIDE_ON26
- tristate "OnSpec 90c26 protocol"
- depends on PARIDE
- help
- This option enables support for the 90c26 parallel port IDE protocol
- from OnSpec Electronics (often marketed under the ValuStore brand
- name). If you chose to build PARIDE support into your kernel, you
- may answer Y here to build in the protocol driver, otherwise you
- should answer M to build it as a loadable module. The module will be
- called on26. You must also have a high-level driver for the type
- of device that you want to support.
-
-#
diff --git a/drivers/block/paride/Makefile b/drivers/block/paride/Makefile
deleted file mode 100644
index cf1742a8475e..000000000000
--- a/drivers/block/paride/Makefile
+++ /dev/null
@@ -1,29 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for Parallel port IDE device drivers.
-#
-# 7 October 2000, Bartlomiej Zolnierkiewicz <bkz@xxxxxxxxxxxxx>
-# Rewritten to use lists instead of if-statements.
-#
-
-obj-$(CONFIG_PARIDE) += paride.o
-obj-$(CONFIG_PARIDE_ATEN) += aten.o
-obj-$(CONFIG_PARIDE_BPCK) += bpck.o
-obj-$(CONFIG_PARIDE_COMM) += comm.o
-obj-$(CONFIG_PARIDE_DSTR) += dstr.o
-obj-$(CONFIG_PARIDE_KBIC) += kbic.o
-obj-$(CONFIG_PARIDE_EPAT) += epat.o
-obj-$(CONFIG_PARIDE_EPIA) += epia.o
-obj-$(CONFIG_PARIDE_FRPW) += frpw.o
-obj-$(CONFIG_PARIDE_FRIQ) += friq.o
-obj-$(CONFIG_PARIDE_FIT2) += fit2.o
-obj-$(CONFIG_PARIDE_FIT3) += fit3.o
-obj-$(CONFIG_PARIDE_ON20) += on20.o
-obj-$(CONFIG_PARIDE_ON26) += on26.o
-obj-$(CONFIG_PARIDE_KTTI) += ktti.o
-obj-$(CONFIG_PARIDE_BPCK6) += bpck6.o
-obj-$(CONFIG_PARIDE_PD) += pd.o
-obj-$(CONFIG_PARIDE_PCD) += pcd.o
-obj-$(CONFIG_PARIDE_PF) += pf.o
-obj-$(CONFIG_PARIDE_PT) += pt.o
-obj-$(CONFIG_PARIDE_PG) += pg.o
diff --git a/drivers/block/paride/Transition-notes b/drivers/block/paride/Transition-notes
deleted file mode 100644
index 70374907c020..000000000000
--- a/drivers/block/paride/Transition-notes
+++ /dev/null
@@ -1,128 +0,0 @@
-Lemma 1:
- If ps_tq is scheduled, ps_tq_active is 1. ps_tq_int() can be called
- only when ps_tq_active is 1.
-Proof: All assignments to ps_tq_active and all scheduling of ps_tq happen
- under ps_spinlock. There are three places where that can happen:
- one in ps_set_intr() (A) and two in ps_tq_int() (B and C).
- Consider the sequnce of these events. A can not be preceded by
- anything except B, since it is under if (!ps_tq_active) under
- ps_spinlock. C is always preceded by B, since we can't reach it
- other than through B and we don't drop ps_spinlock between them.
- IOW, the sequence is A?(BA|BC|B)*. OTOH, number of B can not exceed
- the sum of numbers of A and C, since each call of ps_tq_int() is
- the result of ps_tq execution. Therefore, the sequence starts with
- A and each B is preceded by either A or C. Moments when we enter
- ps_tq_int() are sandwiched between {A,C} and B in that sequence,
- since at any time number of B can not exceed the number of these
- moments which, in turn, can not exceed the number of A and C.
- In other words, the sequence of events is (A or C set ps_tq_active to
- 1 and schedule ps_tq, ps_tq is executed, ps_tq_int() is entered,
- B resets ps_tq_active)*.
-
-
-consider the following area:
- * in do_pd_request1(): to calls of pi_do_claimed() and return in
- case when pd_req is NULL.
- * in next_request(): to call of do_pd_request1()
- * in do_pd_read(): to call of ps_set_intr()
- * in do_pd_read_start(): to calls of pi_do_claimed(), next_request()
-and ps_set_intr()
- * in do_pd_read_drq(): to calls of pi_do_claimed() and next_request()
- * in do_pd_write(): to call of ps_set_intr()
- * in do_pd_write_start(): to calls of pi_do_claimed(), next_request()
-and ps_set_intr()
- * in do_pd_write_done(): to calls of pi_do_claimed() and next_request()
- * in ps_set_intr(): to check for ps_tq_active and to scheduling
- ps_tq if ps_tq_active was 0.
- * in ps_tq_int(): from the moment when we get ps_spinlock() to the
- return, call of con() or scheduling ps_tq.
- * in pi_schedule_claimed() when called from pi_do_claimed() called from
- pd.c, everything until returning 1 or setting or setting ->claim_cont
- on the path that returns 0
- * in pi_do_claimed() when called from pd.c, everything until the call
- of pi_do_claimed() plus the everything until the call of cont() if
- pi_do_claimed() has returned 1.
- * in pi_wake_up() called for PIA that belongs to pd.c, everything from
- the moment when pi_spinlock has been acquired.
-
-Lemma 2:
- 1) at any time at most one thread of execution can be in that area or
- be preempted there.
- 2) When there is such a thread, pd_busy is set or pd_lock is held by
- that thread.
- 3) When there is such a thread, ps_tq_active is 0 or ps_spinlock is
- held by that thread.
- 4) When there is such a thread, all PIA belonging to pd.c have NULL
- ->claim_cont or pi_spinlock is held by thread in question.
-
-Proof: consider the first moment when the above is not true.
-
-(1) can become not true if some thread enters that area while another is there.
- a) do_pd_request1() can be called from next_request() or do_pd_request()
- In the first case the thread was already in the area. In the second,
- the thread was holding pd_lock and found pd_busy not set, which would
- mean that (2) was already not true.
- b) ps_set_intr() and pi_schedule_claimed() can be called only from the
- area.
- c) pi_do_claimed() is called by pd.c only from the area.
- d) ps_tq_int() can enter the area only when the thread is holding
- ps_spinlock and ps_tq_active is 1 (due to Lemma 1). It means that
- (3) was already not true.
- e) do_pd_{read,write}* could be called only from the area. The only
- case that needs consideration is call from pi_wake_up() and there
- we would have to be called for the PIA that got ->claimed_cont
- from pd.c. That could happen only if pi_do_claimed() had been
- called from pd.c for that PIA, which happens only for PIA belonging
- to pd.c.
- f) pi_wake_up() can enter the area only when the thread is holding
- pi_spinlock and ->claimed_cont is non-NULL for PIA belonging to
- pd.c. It means that (4) was already not true.
-
-(2) can become not true only when pd_lock is released by the thread in question.
- Indeed, pd_busy is reset only in the area and thread that resets
- it is holding pd_lock. The only place within the area where we
- release pd_lock is in pd_next_buf() (called from within the area).
- But that code does not reset pd_busy, so pd_busy would have to be
- 0 when pd_next_buf() had acquired pd_lock. If it become 0 while
- we were acquiring the lock, (1) would be already false, since
- the thread that had reset it would be in the area simulateously.
- If it was 0 before we tried to acquire pd_lock, (2) would be
- already false.
-
-For similar reasons, (3) can become not true only when ps_spinlock is released
-by the thread in question. However, all such places within the area are right
-after resetting ps_tq_active to 0.
-
-(4) is done the same way - all places where we release pi_spinlock within
-the area are either after resetting ->claimed_cont to NULL while holding
-pi_spinlock, or after not tocuhing ->claimed_cont since acquiring pi_spinlock
-also in the area. The only place where ->claimed_cont is made non-NULL is
-in the area, under pi_spinlock and we do not release it until after leaving
-the area.
-
-QED.
-
-
-Corollary 1: ps_tq_active can be killed. Indeed, the only place where we
-check its value is in ps_set_intr() and if it had been non-zero at that
-point, we would have violated either (2.1) (if it was set while ps_set_intr()
-was acquiring ps_spinlock) or (2.3) (if it was set when we started to
-acquire ps_spinlock).
-
-Corollary 2: ps_spinlock can be killed. Indeed, Lemma 1 and Lemma 2 show
-that the only possible contention is between scheduling ps_tq followed by
-immediate release of spinlock and beginning of execution of ps_tq on
-another CPU.
-
-Corollary 3: assignment to pd_busy in do_pd_read_start() and do_pd_write_start()
-can be killed. Indeed, we are not holding pd_lock and thus pd_busy is already
-1 here.
-
-Corollary 4: in ps_tq_int() uses of con can be replaced with uses of
-ps_continuation, since the latter is changed only from the area.
-We don't need to reset it to NULL, since we are guaranteed that there
-will be a call of ps_set_intr() before we look at ps_continuation again.
-We can remove the check for ps_continuation being NULL for the same
-reason - the value is guaranteed to be set by the last ps_set_intr() and
-we never pass it NULL. Assignements in the beginning of ps_set_intr()
-can be taken to callers as long as they remain within the area.
diff --git a/drivers/block/paride/aten.c b/drivers/block/paride/aten.c
deleted file mode 100644
index 2695465568ad..000000000000
--- a/drivers/block/paride/aten.c
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- aten.c (c) 1997-8 Grant R. Guenther <grant@xxxxxxxxxx>
- Under the terms of the GNU General Public License.
-
- aten.c is a low-level protocol driver for the ATEN EH-100
- parallel port adapter. The EH-100 supports 4-bit and 8-bit
- modes only. There is also an EH-132 which supports EPP mode
- transfers. The EH-132 is not yet supported.
-
-*/
-
-/* Changes:
-
- 1.01 GRG 1998.05.05 init_proto, release_proto
-
-*/
-
-#define ATEN_VERSION "1.01"
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/wait.h>
-#include <linux/types.h>
-#include <asm/io.h>
-
-#include "paride.h"
-
-#define j44(a,b) ((((a>>4)&0x0f)|(b&0xf0))^0x88)
-
-/* cont = 0 - access the IDE register file
- cont = 1 - access the IDE command set
-*/
-
-static int cont_map[2] = { 0x08, 0x20 };
-
-static void aten_write_regr( PIA *pi, int cont, int regr, int val)
-
-{ int r;
-
- r = regr + cont_map[cont] + 0x80;
-
- w0(r); w2(0xe); w2(6); w0(val); w2(7); w2(6); w2(0xc);
-}
-
-static int aten_read_regr( PIA *pi, int cont, int regr )
-
-{ int a, b, r;
-
- r = regr + cont_map[cont] + 0x40;
-
- switch (pi->mode) {
-
- case 0: w0(r); w2(0xe); w2(6);
- w2(7); w2(6); w2(0);
- a = r1(); w0(0x10); b = r1(); w2(0xc);
- return j44(a,b);
-
- case 1: r |= 0x10;
- w0(r); w2(0xe); w2(6); w0(0xff);
- w2(0x27); w2(0x26); w2(0x20);
- a = r0();
- w2(0x26); w2(0xc);
- return a;
- }
- return -1;
-}
-
-static void aten_read_block( PIA *pi, char * buf, int count )
-
-{ int k, a, b, c, d;
-
- switch (pi->mode) {
-
- case 0: w0(0x48); w2(0xe); w2(6);
- for (k=0;k<count/2;k++) {
- w2(7); w2(6); w2(2);
- a = r1(); w0(0x58); b = r1();
- w2(0); d = r1(); w0(0x48); c = r1();
- buf[2*k] = j44(c,d);
- buf[2*k+1] = j44(a,b);
- }
- w2(0xc);
- break;
-
- case 1: w0(0x58); w2(0xe); w2(6);
- for (k=0;k<count/2;k++) {
- w2(0x27); w2(0x26); w2(0x22);
- a = r0(); w2(0x20); b = r0();
- buf[2*k] = b; buf[2*k+1] = a;
- }
- w2(0x26); w2(0xc);
- break;
- }
-}
-
-static void aten_write_block( PIA *pi, char * buf, int count )
-
-{ int k;
-
- w0(0x88); w2(0xe); w2(6);
- for (k=0;k<count/2;k++) {
- w0(buf[2*k+1]); w2(0xe); w2(6);
- w0(buf[2*k]); w2(7); w2(6);
- }
- w2(0xc);
-}
-
-static void aten_connect ( PIA *pi )
-
-{ pi->saved_r0 = r0();
- pi->saved_r2 = r2();
- w2(0xc);
-}
-
-static void aten_disconnect ( PIA *pi )
-
-{ w0(pi->saved_r0);
- w2(pi->saved_r2);
-}
-
-static void aten_log_adapter( PIA *pi, char * scratch, int verbose )
-
-{ char *mode_string[2] = {"4-bit","8-bit"};
-
- printk("%s: aten %s, ATEN EH-100 at 0x%x, ",
- pi->device,ATEN_VERSION,pi->port);
- printk("mode %d (%s), delay %d\n",pi->mode,
- mode_string[pi->mode],pi->delay);
-
-}
-
-static struct pi_protocol aten = {
- .owner = THIS_MODULE,
- .name = "aten",
- .max_mode = 2,
- .epp_first = 2,
- .default_delay = 1,
- .max_units = 1,
- .write_regr = aten_write_regr,
- .read_regr = aten_read_regr,
- .write_block = aten_write_block,
- .read_block = aten_read_block,
- .connect = aten_connect,
- .disconnect = aten_disconnect,
- .log_adapter = aten_log_adapter,
-};
-
-static int __init aten_init(void)
-{
- return paride_register(&aten);
-}
-
-static void __exit aten_exit(void)
-{
- paride_unregister( &aten );
-}
-
-MODULE_LICENSE("GPL");
-module_init(aten_init)
-module_exit(aten_exit)
diff --git a/drivers/block/paride/bpck.c b/drivers/block/paride/bpck.c
deleted file mode 100644
index 4f27e7392e38..000000000000
--- a/drivers/block/paride/bpck.c
+++ /dev/null
@@ -1,477 +0,0 @@
-/*
- bpck.c (c) 1996-8 Grant R. Guenther <grant@xxxxxxxxxx>
- Under the terms of the GNU General Public License.
-
- bpck.c is a low-level protocol driver for the MicroSolutions
- "backpack" parallel port IDE adapter.
-
-*/
-
-/* Changes:
-
- 1.01 GRG 1998.05.05 init_proto, release_proto, pi->delay
- 1.02 GRG 1998.08.15 default pi->delay returned to 4
-
-*/
-
-#define BPCK_VERSION "1.02"
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/wait.h>
-#include <asm/io.h>
-
-#include "paride.h"
-
-#undef r2
-#undef w2
-
-#define PC pi->private
-#define r2() (PC=(in_p(2) & 0xff))
-#define w2(byte) {out_p(2,byte); PC = byte;}
-#define t2(pat) {PC ^= pat; out_p(2,PC);}
-#define e2() {PC &= 0xfe; out_p(2,PC);}
-#define o2() {PC |= 1; out_p(2,PC);}
-
-#define j44(l,h) (((l>>3)&0x7)|((l>>4)&0x8)|((h<<1)&0x70)|(h&0x80))
-
-/* cont = 0 - access the IDE register file
- cont = 1 - access the IDE command set
- cont = 2 - use internal bpck register addressing
-*/
-
-static int cont_map[3] = { 0x40, 0x48, 0 };
-
-static int bpck_read_regr( PIA *pi, int cont, int regr )
-
-{ int r, l, h;
-
- r = regr + cont_map[cont];
-
- switch (pi->mode) {
-
- case 0: w0(r & 0xf); w0(r); t2(2); t2(4);
- l = r1();
- t2(4);
- h = r1();
- return j44(l,h);
-
- case 1: w0(r & 0xf); w0(r); t2(2);
- e2(); t2(0x20);
- t2(4); h = r0();
- t2(1); t2(0x20);
- return h;
-
- case 2:
- case 3:
- case 4: w0(r); w2(9); w2(0); w2(0x20);
- h = r4();
- w2(0);
- return h;
-
- }
- return -1;
-}
-
-static void bpck_write_regr( PIA *pi, int cont, int regr, int val )
-
-{ int r;
-
- r = regr + cont_map[cont];
-
- switch (pi->mode) {
-
- case 0:
- case 1: w0(r);
- t2(2);
- w0(val);
- o2(); t2(4); t2(1);
- break;
-
- case 2:
- case 3:
- case 4: w0(r); w2(9); w2(0);
- w0(val); w2(1); w2(3); w2(0);
- break;
-
- }
-}
-
-/* These macros access the bpck registers in native addressing */
-
-#define WR(r,v) bpck_write_regr(pi,2,r,v)
-#define RR(r) (bpck_read_regr(pi,2,r))
-
-static void bpck_write_block( PIA *pi, char * buf, int count )
-
-{ int i;
-
- switch (pi->mode) {
-
- case 0: WR(4,0x40);
- w0(0x40); t2(2); t2(1);
- for (i=0;i<count;i++) { w0(buf[i]); t2(4); }
- WR(4,0);
- break;
-
- case 1: WR(4,0x50);
- w0(0x40); t2(2); t2(1);
- for (i=0;i<count;i++) { w0(buf[i]); t2(4); }
- WR(4,0x10);
- break;
-
- case 2: WR(4,0x48);
- w0(0x40); w2(9); w2(0); w2(1);
- for (i=0;i<count;i++) w4(buf[i]);
- w2(0);
- WR(4,8);
- break;
-
- case 3: WR(4,0x48);
- w0(0x40); w2(9); w2(0); w2(1);
- for (i=0;i<count/2;i++) w4w(((u16 *)buf)[i]);
- w2(0);
- WR(4,8);
- break;
-
- case 4: WR(4,0x48);
- w0(0x40); w2(9); w2(0); w2(1);
- for (i=0;i<count/4;i++) w4l(((u32 *)buf)[i]);
- w2(0);
- WR(4,8);
- break;
- }
-}
-
-static void bpck_read_block( PIA *pi, char * buf, int count )
-
-{ int i, l, h;
-
- switch (pi->mode) {
-
- case 0: WR(4,0x40);
- w0(0x40); t2(2);
- for (i=0;i<count;i++) {
- t2(4); l = r1();
- t2(4); h = r1();
- buf[i] = j44(l,h);
- }
- WR(4,0);
- break;
-
- case 1: WR(4,0x50);
- w0(0x40); t2(2); t2(0x20);
- for(i=0;i<count;i++) { t2(4); buf[i] = r0(); }
- t2(1); t2(0x20);
- WR(4,0x10);
- break;
-
- case 2: WR(4,0x48);
- w0(0x40); w2(9); w2(0); w2(0x20);
- for (i=0;i<count;i++) buf[i] = r4();
- w2(0);
- WR(4,8);
- break;
-
- case 3: WR(4,0x48);
- w0(0x40); w2(9); w2(0); w2(0x20);
- for (i=0;i<count/2;i++) ((u16 *)buf)[i] = r4w();
- w2(0);
- WR(4,8);
- break;
-
- case 4: WR(4,0x48);
- w0(0x40); w2(9); w2(0); w2(0x20);
- for (i=0;i<count/4;i++) ((u32 *)buf)[i] = r4l();
- w2(0);
- WR(4,8);
- break;
-
- }
-}
-
-static int bpck_probe_unit ( PIA *pi )
-
-{ int o1, o0, f7, id;
- int t, s;
-
- id = pi->unit;
- s = 0;
- w2(4); w2(0xe); r2(); t2(2);
- o1 = r1()&0xf8;
- o0 = r0();
- w0(255-id); w2(4); w0(id);
- t2(8); t2(8); t2(8);
- t2(2); t = r1()&0xf8;
- f7 = ((id % 8) == 7);
- if ((f7) || (t != o1)) { t2(2); s = r1()&0xf8; }
- if ((t == o1) && ((!f7) || (s == o1))) {
- w2(0x4c); w0(o0);
- return 0;
- }
- t2(8); w0(0); t2(2); w2(0x4c); w0(o0);
- return 1;
-}
-
-static void bpck_connect ( PIA *pi )
-
-{ pi->saved_r0 = r0();
- w0(0xff-pi->unit); w2(4); w0(pi->unit);
- t2(8); t2(8); t2(8);
- t2(2); t2(2);
-
- switch (pi->mode) {
-
- case 0: t2(8); WR(4,0);
- break;
-
- case 1: t2(8); WR(4,0x10);
- break;
-
- case 2:
- case 3:
- case 4: w2(0); WR(4,8);
- break;
-
- }
-
- WR(5,8);
-
- if (pi->devtype == PI_PCD) {
- WR(0x46,0x10); /* fiddle with ESS logic ??? */
- WR(0x4c,0x38);
- WR(0x4d,0x88);
- WR(0x46,0xa0);
- WR(0x41,0);
- WR(0x4e,8);
- }
-}
-
-static void bpck_disconnect ( PIA *pi )
-
-{ w0(0);
- if (pi->mode >= 2) { w2(9); w2(0); } else t2(2);
- w2(0x4c); w0(pi->saved_r0);
-}
-
-static void bpck_force_spp ( PIA *pi )
-
-/* This fakes the EPP protocol to turn off EPP ... */
-
-{ pi->saved_r0 = r0();
- w0(0xff-pi->unit); w2(4); w0(pi->unit);
- t2(8); t2(8); t2(8);
- t2(2); t2(2);
-
- w2(0);
- w0(4); w2(9); w2(0);
- w0(0); w2(1); w2(3); w2(0);
- w0(0); w2(9); w2(0);
- w2(0x4c); w0(pi->saved_r0);
-}
-
-#define TEST_LEN 16
-
-static int bpck_test_proto( PIA *pi, char * scratch, int verbose )
-
-{ int i, e, l, h, om;
- char buf[TEST_LEN];
-
- bpck_force_spp(pi);
-
- switch (pi->mode) {
-
- case 0: bpck_connect(pi);
- WR(0x13,0x7f);
- w0(0x13); t2(2);
- for(i=0;i<TEST_LEN;i++) {
- t2(4); l = r1();
- t2(4); h = r1();
- buf[i] = j44(l,h);
- }
- bpck_disconnect(pi);
- break;
-
- case 1: bpck_connect(pi);
- WR(0x13,0x7f);
- w0(0x13); t2(2); t2(0x20);
- for(i=0;i<TEST_LEN;i++) { t2(4); buf[i] = r0(); }
- t2(1); t2(0x20);
- bpck_disconnect(pi);
- break;
-
- case 2:
- case 3:
- case 4: om = pi->mode;
- pi->mode = 0;
- bpck_connect(pi);
- WR(7,3);
- WR(4,8);
- bpck_disconnect(pi);
-
- pi->mode = om;
- bpck_connect(pi);
- w0(0x13); w2(9); w2(1); w0(0); w2(3); w2(0); w2(0xe0);
-
- switch (pi->mode) {
- case 2: for (i=0;i<TEST_LEN;i++) buf[i] = r4();
- break;
- case 3: for (i=0;i<TEST_LEN/2;i++) ((u16 *)buf)[i] = r4w();
- break;
- case 4: for (i=0;i<TEST_LEN/4;i++) ((u32 *)buf)[i] = r4l();
- break;
- }
-
- w2(0);
- WR(7,0);
- bpck_disconnect(pi);
-
- break;
-
- }
-
- if (verbose) {
- printk("%s: bpck: 0x%x unit %d mode %d: ",
- pi->device,pi->port,pi->unit,pi->mode);
- for (i=0;i<TEST_LEN;i++) printk("%3d",buf[i]);
- printk("\n");
- }
-
- e = 0;
- for (i=0;i<TEST_LEN;i++) if (buf[i] != (i+1)) e++;
- return e;
-}
-
-static void bpck_read_eeprom ( PIA *pi, char * buf )
-
-{ int i,j,k,n,p,v,f, om, od;
-
- bpck_force_spp(pi);
-
- om = pi->mode; od = pi->delay;
- pi->mode = 0; pi->delay = 6;
-
- bpck_connect(pi);
-
- n = 0;
- WR(4,0);
- for (i=0;i<64;i++) {
- WR(6,8);
- WR(6,0xc);
- p = 0x100;
- for (k=0;k<9;k++) {
- f = (((i + 0x180) & p) != 0) * 2;
- WR(6,f+0xc);
- WR(6,f+0xd);
- WR(6,f+0xc);
- p = (p >> 1);
- }
- for (j=0;j<2;j++) {
- v = 0;
- for (k=0;k<8;k++) {
- WR(6,0xc);
- WR(6,0xd);
- WR(6,0xc);
- f = RR(0);
- v = 2*v + (f == 0x84);
- }
- buf[2*i+1-j] = v;
- }
- }
- WR(6,8);
- WR(6,0);
- WR(5,8);
-
- bpck_disconnect(pi);
-
- if (om >= 2) {
- bpck_connect(pi);
- WR(7,3);
- WR(4,8);
- bpck_disconnect(pi);
- }
-
- pi->mode = om; pi->delay = od;
-}
-
-static int bpck_test_port ( PIA *pi ) /* check for 8-bit port */
-
-{ int i, r, m;
-
- w2(0x2c); i = r0(); w0(255-i); r = r0(); w0(i);
- m = -1;
- if (r == i) m = 2;
- if (r == (255-i)) m = 0;
-
- w2(0xc); i = r0(); w0(255-i); r = r0(); w0(i);
- if (r != (255-i)) m = -1;
-
- if (m == 0) { w2(6); w2(0xc); r = r0(); w0(0xaa); w0(r); w0(0xaa); }
- if (m == 2) { w2(0x26); w2(0xc); }
-
- if (m == -1) return 0;
- return 5;
-}
-
-static void bpck_log_adapter( PIA *pi, char * scratch, int verbose )
-
-{ char *mode_string[5] = { "4-bit","8-bit","EPP-8",
- "EPP-16","EPP-32" };
-
-#ifdef DUMP_EEPROM
- int i;
-#endif
-
- bpck_read_eeprom(pi,scratch);
-
-#ifdef DUMP_EEPROM
- if (verbose) {
- for(i=0;i<128;i++)
- if ((scratch[i] < ' ') || (scratch[i] > '~'))
- scratch[i] = '.';
- printk("%s: bpck EEPROM: %64.64s\n",pi->device,scratch);
- printk("%s: %64.64s\n",pi->device,&scratch[64]);
- }
-#endif
-
- printk("%s: bpck %s, backpack %8.8s unit %d",
- pi->device,BPCK_VERSION,&scratch[110],pi->unit);
- printk(" at 0x%x, mode %d (%s), delay %d\n",pi->port,
- pi->mode,mode_string[pi->mode],pi->delay);
-}
-
-static struct pi_protocol bpck = {
- .owner = THIS_MODULE,
- .name = "bpck",
- .max_mode = 5,
- .epp_first = 2,
- .default_delay = 4,
- .max_units = 255,
- .write_regr = bpck_write_regr,
- .read_regr = bpck_read_regr,
- .write_block = bpck_write_block,
- .read_block = bpck_read_block,
- .connect = bpck_connect,
- .disconnect = bpck_disconnect,
- .test_port = bpck_test_port,
- .probe_unit = bpck_probe_unit,
- .test_proto = bpck_test_proto,
- .log_adapter = bpck_log_adapter,
-};
-
-static int __init bpck_init(void)
-{
- return paride_register(&bpck);
-}
-
-static void __exit bpck_exit(void)
-{
- paride_unregister(&bpck);
-}
-
-MODULE_LICENSE("GPL");
-module_init(bpck_init)
-module_exit(bpck_exit)
diff --git a/drivers/block/paride/bpck6.c b/drivers/block/paride/bpck6.c
deleted file mode 100644
index ec64e7f5d1ce..000000000000
--- a/drivers/block/paride/bpck6.c
+++ /dev/null
@@ -1,267 +0,0 @@
-/*
- backpack.c (c) 2001 Micro Solutions Inc.
- Released under the terms of the GNU General Public license
-
- backpack.c is a low-level protocol driver for the Micro Solutions
- "BACKPACK" parallel port IDE adapter
- (Works on Series 6 drives)
-
- Written by: Ken Hahn (linux-dev@xxxxxxxxxxxxxxxxxxx)
- Clive Turvey (linux-dev@xxxxxxxxxxxxxxxxxxx)
-
-*/
-
-/*
- This is Ken's linux wrapper for the PPC library
- Version 1.0.0 is the backpack driver for which source is not available
- Version 2.0.0 is the first to have source released
- Version 2.0.1 is the "Cox-ified" source code
- Version 2.0.2 - fixed version string usage, and made ppc functions static
-*/
-
-
-#define BACKPACK_VERSION "2.0.2"
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/types.h>
-#include <asm/io.h>
-#include <linux/parport.h>
-
-#include "ppc6lnx.c"
-#include "paride.h"
-
-/* PARAMETERS */
-static bool verbose; /* set this to 1 to see debugging messages and whatnot */
-
-
-#define PPCSTRUCT(pi) ((Interface *)(pi->private))
-
-/****************************************************************/
-/*
- ATAPI CDROM DRIVE REGISTERS
-*/
-#define ATAPI_DATA 0 /* data port */
-#define ATAPI_ERROR 1 /* error register (read) */
-#define ATAPI_FEATURES 1 /* feature register (write) */
-#define ATAPI_INT_REASON 2 /* interrupt reason register */
-#define ATAPI_COUNT_LOW 4 /* byte count register (low) */
-#define ATAPI_COUNT_HIGH 5 /* byte count register (high) */
-#define ATAPI_DRIVE_SEL 6 /* drive select register */
-#define ATAPI_STATUS 7 /* status port (read) */
-#define ATAPI_COMMAND 7 /* command port (write) */
-#define ATAPI_ALT_STATUS 0x0e /* alternate status reg (read) */
-#define ATAPI_DEVICE_CONTROL 0x0e /* device control (write) */
-/****************************************************************/
-
-static int bpck6_read_regr(PIA *pi, int cont, int reg)
-{
- unsigned int out;
-
- /* check for bad settings */
- if (reg<0 || reg>7 || cont<0 || cont>2)
- {
- return(-1);
- }
- out=ppc6_rd_port(PPCSTRUCT(pi),cont?reg|8:reg);
- return(out);
-}
-
-static void bpck6_write_regr(PIA *pi, int cont, int reg, int val)
-{
- /* check for bad settings */
- if (reg>=0 && reg<=7 && cont>=0 && cont<=1)
- {
- ppc6_wr_port(PPCSTRUCT(pi),cont?reg|8:reg,(u8)val);
- }
-}
-
-static void bpck6_write_block( PIA *pi, char * buf, int len )
-{
- ppc6_wr_port16_blk(PPCSTRUCT(pi),ATAPI_DATA,buf,(u32)len>>1);
-}
-
-static void bpck6_read_block( PIA *pi, char * buf, int len )
-{
- ppc6_rd_port16_blk(PPCSTRUCT(pi),ATAPI_DATA,buf,(u32)len>>1);
-}
-
-static void bpck6_connect ( PIA *pi )
-{
- if(verbose)
- {
- printk(KERN_DEBUG "connect\n");
- }
-
- if(pi->mode >=2)
- {
- PPCSTRUCT(pi)->mode=4+pi->mode-2;
- }
- else if(pi->mode==1)
- {
- PPCSTRUCT(pi)->mode=3;
- }
- else
- {
- PPCSTRUCT(pi)->mode=1;
- }
-
- ppc6_open(PPCSTRUCT(pi));
- ppc6_wr_extout(PPCSTRUCT(pi),0x3);
-}
-
-static void bpck6_disconnect ( PIA *pi )
-{
- if(verbose)
- {
- printk("disconnect\n");
- }
- ppc6_wr_extout(PPCSTRUCT(pi),0x0);
- ppc6_close(PPCSTRUCT(pi));
-}
-
-static int bpck6_test_port ( PIA *pi ) /* check for 8-bit port */
-{
- if(verbose)
- {
- printk(KERN_DEBUG "PARPORT indicates modes=%x for lp=0x%lx\n",
- ((struct pardevice*)(pi->pardev))->port->modes,
- ((struct pardevice *)(pi->pardev))->port->base);
- }
-
- /*copy over duplicate stuff.. initialize state info*/
- PPCSTRUCT(pi)->ppc_id=pi->unit;
- PPCSTRUCT(pi)->lpt_addr=pi->port;
-
- /* look at the parport device to see if what modes we can use */
- if(((struct pardevice *)(pi->pardev))->port->modes &
- (PARPORT_MODE_EPP)
- )
- {
- return 5; /* Can do EPP*/
- }
- else if(((struct pardevice *)(pi->pardev))->port->modes &
- (PARPORT_MODE_TRISTATE)
- )
- {
- return 2;
- }
- else /*Just flat SPP*/
- {
- return 1;
- }
-}
-
-static int bpck6_probe_unit ( PIA *pi )
-{
- int out;
-
- if(verbose)
- {
- printk(KERN_DEBUG "PROBE UNIT %x on port:%x\n",pi->unit,pi->port);
- }
-
- /*SET PPC UNIT NUMBER*/
- PPCSTRUCT(pi)->ppc_id=pi->unit;
-
- /*LOWER DOWN TO UNIDIRECTIONAL*/
- PPCSTRUCT(pi)->mode=1;
-
- out=ppc6_open(PPCSTRUCT(pi));
-
- if(verbose)
- {
- printk(KERN_DEBUG "ppc_open returned %2x\n",out);
- }
-
- if(out)
- {
- ppc6_close(PPCSTRUCT(pi));
- if(verbose)
- {
- printk(KERN_DEBUG "leaving probe\n");
- }
- return(1);
- }
- else
- {
- if(verbose)
- {
- printk(KERN_DEBUG "Failed open\n");
- }
- return(0);
- }
-}
-
-static void bpck6_log_adapter( PIA *pi, char * scratch, int verbose )
-{
- char *mode_string[5]=
- {"4-bit","8-bit","EPP-8","EPP-16","EPP-32"};
-
- printk("%s: BACKPACK Protocol Driver V"BACKPACK_VERSION"\n",pi->device);
- printk("%s: Copyright 2001 by Micro Solutions, Inc., DeKalb IL.\n",pi->device);
- printk("%s: BACKPACK %s, Micro Solutions BACKPACK Drive at 0x%x\n",
- pi->device,BACKPACK_VERSION,pi->port);
- printk("%s: Unit: %d Mode:%d (%s) Delay %d\n",pi->device,
- pi->unit,pi->mode,mode_string[pi->mode],pi->delay);
-}
-
-static int bpck6_init_proto(PIA *pi)
-{
- Interface *p = kzalloc(sizeof(Interface), GFP_KERNEL);
-
- if (p) {
- pi->private = (unsigned long)p;
- return 0;
- }
-
- printk(KERN_ERR "%s: ERROR COULDN'T ALLOCATE MEMORY\n", pi->device);
- return -1;
-}
-
-static void bpck6_release_proto(PIA *pi)
-{
- kfree((void *)(pi->private));
-}
-
-static struct pi_protocol bpck6 = {
- .owner = THIS_MODULE,
- .name = "bpck6",
- .max_mode = 5,
- .epp_first = 2, /* 2-5 use epp (need 8 ports) */
- .max_units = 255,
- .write_regr = bpck6_write_regr,
- .read_regr = bpck6_read_regr,
- .write_block = bpck6_write_block,
- .read_block = bpck6_read_block,
- .connect = bpck6_connect,
- .disconnect = bpck6_disconnect,
- .test_port = bpck6_test_port,
- .probe_unit = bpck6_probe_unit,
- .log_adapter = bpck6_log_adapter,
- .init_proto = bpck6_init_proto,
- .release_proto = bpck6_release_proto,
-};
-
-static int __init bpck6_init(void)
-{
- printk(KERN_INFO "bpck6: BACKPACK Protocol Driver V"BACKPACK_VERSION"\n");
- printk(KERN_INFO "bpck6: Copyright 2001 by Micro Solutions, Inc., DeKalb IL. USA\n");
- if(verbose)
- printk(KERN_DEBUG "bpck6: verbose debug enabled.\n");
- return paride_register(&bpck6);
-}
-
-static void __exit bpck6_exit(void)
-{
- paride_unregister(&bpck6);
-}
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Micro Solutions Inc.");
-MODULE_DESCRIPTION("BACKPACK Protocol module, compatible with PARIDE");
-module_param(verbose, bool, 0644);
-module_init(bpck6_init)
-module_exit(bpck6_exit)
diff --git a/drivers/block/paride/comm.c b/drivers/block/paride/comm.c
deleted file mode 100644
index 9bcd35495323..000000000000
--- a/drivers/block/paride/comm.c
+++ /dev/null
@@ -1,218 +0,0 @@
-/*
- comm.c (c) 1997-8 Grant R. Guenther <grant@xxxxxxxxxx>
- Under the terms of the GNU General Public License.
-
- comm.c is a low-level protocol driver for some older models
- of the DataStor "Commuter" parallel to IDE adapter. Some of
- the parallel port devices marketed by Arista currently
- use this adapter.
-*/
-
-/* Changes:
-
- 1.01 GRG 1998.05.05 init_proto, release_proto
-
-*/
-
-#define COMM_VERSION "1.01"
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/wait.h>
-#include <asm/io.h>
-
-#include "paride.h"
-
-/* mode codes: 0 nybble reads, 8-bit writes
- 1 8-bit reads and writes
- 2 8-bit EPP mode
-*/
-
-#define j44(a,b) (((a>>3)&0x0f)|((b<<1)&0xf0))
-
-#define P1 w2(5);w2(0xd);w2(0xd);w2(5);w2(4);
-#define P2 w2(5);w2(7);w2(7);w2(5);w2(4);
-
-/* cont = 0 - access the IDE register file
- cont = 1 - access the IDE command set
-*/
-
-static int cont_map[2] = { 0x08, 0x10 };
-
-static int comm_read_regr( PIA *pi, int cont, int regr )
-
-{ int l, h, r;
-
- r = regr + cont_map[cont];
-
- switch (pi->mode) {
-
- case 0: w0(r); P1; w0(0);
- w2(6); l = r1(); w0(0x80); h = r1(); w2(4);
- return j44(l,h);
-
- case 1: w0(r+0x20); P1;
- w0(0); w2(0x26); h = r0(); w2(4);
- return h;
-
- case 2:
- case 3:
- case 4: w3(r+0x20); (void)r1();
- w2(0x24); h = r4(); w2(4);
- return h;
-
- }
- return -1;
-}
-
-static void comm_write_regr( PIA *pi, int cont, int regr, int val )
-
-{ int r;
-
- r = regr + cont_map[cont];
-
- switch (pi->mode) {
-
- case 0:
- case 1: w0(r); P1; w0(val); P2;
- break;
-
- case 2:
- case 3:
- case 4: w3(r); (void)r1(); w4(val);
- break;
- }
-}
-
-static void comm_connect ( PIA *pi )
-
-{ pi->saved_r0 = r0();
- pi->saved_r2 = r2();
- w2(4); w0(0xff); w2(6);
- w2(4); w0(0xaa); w2(6);
- w2(4); w0(0x00); w2(6);
- w2(4); w0(0x87); w2(6);
- w2(4); w0(0xe0); w2(0xc); w2(0xc); w2(4);
-}
-
-static void comm_disconnect ( PIA *pi )
-
-{ w2(0); w2(0); w2(0); w2(4);
- w0(pi->saved_r0);
- w2(pi->saved_r2);
-}
-
-static void comm_read_block( PIA *pi, char * buf, int count )
-
-{ int i, l, h;
-
- switch (pi->mode) {
-
- case 0: w0(0x48); P1;
- for(i=0;i<count;i++) {
- w0(0); w2(6); l = r1();
- w0(0x80); h = r1(); w2(4);
- buf[i] = j44(l,h);
- }
- break;
-
- case 1: w0(0x68); P1; w0(0);
- for(i=0;i<count;i++) {
- w2(0x26); buf[i] = r0(); w2(0x24);
- }
- w2(4);
- break;
-
- case 2: w3(0x68); (void)r1(); w2(0x24);
- for (i=0;i<count;i++) buf[i] = r4();
- w2(4);
- break;
-
- case 3: w3(0x68); (void)r1(); w2(0x24);
- for (i=0;i<count/2;i++) ((u16 *)buf)[i] = r4w();
- w2(4);
- break;
-
- case 4: w3(0x68); (void)r1(); w2(0x24);
- for (i=0;i<count/4;i++) ((u32 *)buf)[i] = r4l();
- w2(4);
- break;
-
- }
-}
-
-/* NB: Watch out for the byte swapped writes ! */
-
-static void comm_write_block( PIA *pi, char * buf, int count )
-
-{ int k;
-
- switch (pi->mode) {
-
- case 0:
- case 1: w0(0x68); P1;
- for (k=0;k<count;k++) {
- w2(5); w0(buf[k^1]); w2(7);
- }
- w2(5); w2(4);
- break;
-
- case 2: w3(0x48); (void)r1();
- for (k=0;k<count;k++) w4(buf[k^1]);
- break;
-
- case 3: w3(0x48); (void)r1();
- for (k=0;k<count/2;k++) w4w(pi_swab16(buf,k));
- break;
-
- case 4: w3(0x48); (void)r1();
- for (k=0;k<count/4;k++) w4l(pi_swab32(buf,k));
- break;
-
-
- }
-}
-
-static void comm_log_adapter( PIA *pi, char * scratch, int verbose )
-
-{ char *mode_string[5] = {"4-bit","8-bit","EPP-8","EPP-16","EPP-32"};
-
- printk("%s: comm %s, DataStor Commuter at 0x%x, ",
- pi->device,COMM_VERSION,pi->port);
- printk("mode %d (%s), delay %d\n",pi->mode,
- mode_string[pi->mode],pi->delay);
-
-}
-
-static struct pi_protocol comm = {
- .owner = THIS_MODULE,
- .name = "comm",
- .max_mode = 5,
- .epp_first = 2,
- .default_delay = 1,
- .max_units = 1,
- .write_regr = comm_write_regr,
- .read_regr = comm_read_regr,
- .write_block = comm_write_block,
- .read_block = comm_read_block,
- .connect = comm_connect,
- .disconnect = comm_disconnect,
- .log_adapter = comm_log_adapter,
-};
-
-static int __init comm_init(void)
-{
- return paride_register(&comm);
-}
-
-static void __exit comm_exit(void)
-{
- paride_unregister(&comm);
-}
-
-MODULE_LICENSE("GPL");
-module_init(comm_init)
-module_exit(comm_exit)
diff --git a/drivers/block/paride/dstr.c b/drivers/block/paride/dstr.c
deleted file mode 100644
index accc5c777cbb..000000000000
--- a/drivers/block/paride/dstr.c
+++ /dev/null
@@ -1,233 +0,0 @@
-/*
- dstr.c (c) 1997-8 Grant R. Guenther <grant@xxxxxxxxxx>
- Under the terms of the GNU General Public License.
-
- dstr.c is a low-level protocol driver for the
- DataStor EP2000 parallel to IDE adapter chip.
-
-*/
-
-/* Changes:
-
- 1.01 GRG 1998.05.06 init_proto, release_proto
-
-*/
-
-#define DSTR_VERSION "1.01"
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/wait.h>
-#include <asm/io.h>
-
-#include "paride.h"
-
-/* mode codes: 0 nybble reads, 8-bit writes
- 1 8-bit reads and writes
- 2 8-bit EPP mode
- 3 EPP-16
- 4 EPP-32
-*/
-
-#define j44(a,b) (((a>>3)&0x07)|((~a>>4)&0x08)|((b<<1)&0x70)|((~b)&0x80))
-
-#define P1 w2(5);w2(0xd);w2(5);w2(4);
-#define P2 w2(5);w2(7);w2(5);w2(4);
-#define P3 w2(6);w2(4);w2(6);w2(4);
-
-/* cont = 0 - access the IDE register file
- cont = 1 - access the IDE command set
-*/
-
-static int cont_map[2] = { 0x20, 0x40 };
-
-static int dstr_read_regr( PIA *pi, int cont, int regr )
-
-{ int a, b, r;
-
- r = regr + cont_map[cont];
-
- w0(0x81); P1;
- if (pi->mode) { w0(0x11); } else { w0(1); }
- P2; w0(r); P1;
-
- switch (pi->mode) {
-
- case 0: w2(6); a = r1(); w2(4); w2(6); b = r1(); w2(4);
- return j44(a,b);
-
- case 1: w0(0); w2(0x26); a = r0(); w2(4);
- return a;
-
- case 2:
- case 3:
- case 4: w2(0x24); a = r4(); w2(4);
- return a;
-
- }
- return -1;
-}
-
-static void dstr_write_regr( PIA *pi, int cont, int regr, int val )
-
-{ int r;
-
- r = regr + cont_map[cont];
-
- w0(0x81); P1;
- if (pi->mode >= 2) { w0(0x11); } else { w0(1); }
- P2; w0(r); P1;
-
- switch (pi->mode) {
-
- case 0:
- case 1: w0(val); w2(5); w2(7); w2(5); w2(4);
- break;
-
- case 2:
- case 3:
- case 4: w4(val);
- break;
- }
-}
-
-#define CCP(x) w0(0xff);w2(0xc);w2(4);\
- w0(0xaa);w0(0x55);w0(0);w0(0xff);w0(0x87);w0(0x78);\
- w0(x);w2(5);w2(4);
-
-static void dstr_connect ( PIA *pi )
-
-{ pi->saved_r0 = r0();
- pi->saved_r2 = r2();
- w2(4); CCP(0xe0); w0(0xff);
-}
-
-static void dstr_disconnect ( PIA *pi )
-
-{ CCP(0x30);
- w0(pi->saved_r0);
- w2(pi->saved_r2);
-}
-
-static void dstr_read_block( PIA *pi, char * buf, int count )
-
-{ int k, a, b;
-
- w0(0x81); P1;
- if (pi->mode) { w0(0x19); } else { w0(9); }
- P2; w0(0x82); P1; P3; w0(0x20); P1;
-
- switch (pi->mode) {
-
- case 0: for (k=0;k<count;k++) {
- w2(6); a = r1(); w2(4);
- w2(6); b = r1(); w2(4);
- buf[k] = j44(a,b);
- }
- break;
-
- case 1: w0(0);
- for (k=0;k<count;k++) {
- w2(0x26); buf[k] = r0(); w2(0x24);
- }
- w2(4);
- break;
-
- case 2: w2(0x24);
- for (k=0;k<count;k++) buf[k] = r4();
- w2(4);
- break;
-
- case 3: w2(0x24);
- for (k=0;k<count/2;k++) ((u16 *)buf)[k] = r4w();
- w2(4);
- break;
-
- case 4: w2(0x24);
- for (k=0;k<count/4;k++) ((u32 *)buf)[k] = r4l();
- w2(4);
- break;
-
- }
-}
-
-static void dstr_write_block( PIA *pi, char * buf, int count )
-
-{ int k;
-
- w0(0x81); P1;
- if (pi->mode) { w0(0x19); } else { w0(9); }
- P2; w0(0x82); P1; P3; w0(0x20); P1;
-
- switch (pi->mode) {
-
- case 0:
- case 1: for (k=0;k<count;k++) {
- w2(5); w0(buf[k]); w2(7);
- }
- w2(5); w2(4);
- break;
-
- case 2: w2(0xc5);
- for (k=0;k<count;k++) w4(buf[k]);
- w2(0xc4);
- break;
-
- case 3: w2(0xc5);
- for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]);
- w2(0xc4);
- break;
-
- case 4: w2(0xc5);
- for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]);
- w2(0xc4);
- break;
-
- }
-}
-
-
-static void dstr_log_adapter( PIA *pi, char * scratch, int verbose )
-
-{ char *mode_string[5] = {"4-bit","8-bit","EPP-8",
- "EPP-16","EPP-32"};
-
- printk("%s: dstr %s, DataStor EP2000 at 0x%x, ",
- pi->device,DSTR_VERSION,pi->port);
- printk("mode %d (%s), delay %d\n",pi->mode,
- mode_string[pi->mode],pi->delay);
-
-}
-
-static struct pi_protocol dstr = {
- .owner = THIS_MODULE,
- .name = "dstr",
- .max_mode = 5,
- .epp_first = 2,
- .default_delay = 1,
- .max_units = 1,
- .write_regr = dstr_write_regr,
- .read_regr = dstr_read_regr,
- .write_block = dstr_write_block,
- .read_block = dstr_read_block,
- .connect = dstr_connect,
- .disconnect = dstr_disconnect,
- .log_adapter = dstr_log_adapter,
-};
-
-static int __init dstr_init(void)
-{
- return paride_register(&dstr);
-}
-
-static void __exit dstr_exit(void)
-{
- paride_unregister(&dstr);
-}
-
-MODULE_LICENSE("GPL");
-module_init(dstr_init)
-module_exit(dstr_exit)
diff --git a/drivers/block/paride/epat.c b/drivers/block/paride/epat.c
deleted file mode 100644
index 1bcdff77322e..000000000000
--- a/drivers/block/paride/epat.c
+++ /dev/null
@@ -1,340 +0,0 @@
-/*
- epat.c (c) 1997-8 Grant R. Guenther <grant@xxxxxxxxxx>
- Under the terms of the GNU General Public License.
-
- This is the low level protocol driver for the EPAT parallel
- to IDE adapter from Shuttle Technologies. This adapter is
- used in many popular parallel port disk products such as the
- SyQuest EZ drives, the Avatar Shark and the Imation SuperDisk.
-
-*/
-
-/* Changes:
-
- 1.01 GRG 1998.05.06 init_proto, release_proto
- 1.02 Joshua b. Jore CPP(renamed), epat_connect, epat_disconnect
-
-*/
-
-#define EPAT_VERSION "1.02"
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/wait.h>
-#include <asm/io.h>
-
-#include "paride.h"
-
-#define j44(a,b) (((a>>4)&0x0f)+(b&0xf0))
-#define j53(a,b) (((a>>3)&0x1f)+((b<<4)&0xe0))
-
-static int epatc8;
-
-module_param(epatc8, int, 0);
-MODULE_PARM_DESC(epatc8, "support for the Shuttle EP1284 chip, "
- "used in any recent Imation SuperDisk (LS-120) drive.");
-
-/* cont = 0 IDE register file
- cont = 1 IDE control registers
- cont = 2 internal EPAT registers
-*/
-
-static int cont_map[3] = { 0x18, 0x10, 0 };
-
-static void epat_write_regr( PIA *pi, int cont, int regr, int val)
-
-{ int r;
-
- r = regr + cont_map[cont];
-
- switch (pi->mode) {
-
- case 0:
- case 1:
- case 2: w0(0x60+r); w2(1); w0(val); w2(4);
- break;
-
- case 3:
- case 4:
- case 5: w3(0x40+r); w4(val);
- break;
-
- }
-}
-
-static int epat_read_regr( PIA *pi, int cont, int regr )
-
-{ int a, b, r;
-
- r = regr + cont_map[cont];
-
- switch (pi->mode) {
-
- case 0: w0(r); w2(1); w2(3);
- a = r1(); w2(4); b = r1();
- return j44(a,b);
-
- case 1: w0(0x40+r); w2(1); w2(4);
- a = r1(); b = r2(); w0(0xff);
- return j53(a,b);
-
- case 2: w0(0x20+r); w2(1); w2(0x25);
- a = r0(); w2(4);
- return a;
-
- case 3:
- case 4:
- case 5: w3(r); w2(0x24); a = r4(); w2(4);
- return a;
-
- }
- return -1; /* never gets here */
-}
-
-static void epat_read_block( PIA *pi, char * buf, int count )
-
-{ int k, ph, a, b;
-
- switch (pi->mode) {
-
- case 0: w0(7); w2(1); w2(3); w0(0xff);
- ph = 0;
- for(k=0;k<count;k++) {
- if (k == count-1) w0(0xfd);
- w2(6+ph); a = r1();
- if (a & 8) b = a;
- else { w2(4+ph); b = r1(); }
- buf[k] = j44(a,b);
- ph = 1 - ph;
- }
- w0(0); w2(4);
- break;
-
- case 1: w0(0x47); w2(1); w2(5); w0(0xff);
- ph = 0;
- for(k=0;k<count;k++) {
- if (k == count-1) w0(0xfd);
- w2(4+ph);
- a = r1(); b = r2();
- buf[k] = j53(a,b);
- ph = 1 - ph;
- }
- w0(0); w2(4);
- break;
-
- case 2: w0(0x27); w2(1); w2(0x25); w0(0);
- ph = 0;
- for(k=0;k<count-1;k++) {
- w2(0x24+ph);
- buf[k] = r0();
- ph = 1 - ph;
- }
- w2(0x26); w2(0x27); buf[count-1] = r0();
- w2(0x25); w2(4);
- break;
-
- case 3: w3(0x80); w2(0x24);
- for(k=0;k<count-1;k++) buf[k] = r4();
- w2(4); w3(0xa0); w2(0x24); buf[count-1] = r4();
- w2(4);
- break;
-
- case 4: w3(0x80); w2(0x24);
- for(k=0;k<(count/2)-1;k++) ((u16 *)buf)[k] = r4w();
- buf[count-2] = r4();
- w2(4); w3(0xa0); w2(0x24); buf[count-1] = r4();
- w2(4);
- break;
-
- case 5: w3(0x80); w2(0x24);
- for(k=0;k<(count/4)-1;k++) ((u32 *)buf)[k] = r4l();
- for(k=count-4;k<count-1;k++) buf[k] = r4();
- w2(4); w3(0xa0); w2(0x24); buf[count-1] = r4();
- w2(4);
- break;
-
- }
-}
-
-static void epat_write_block( PIA *pi, char * buf, int count )
-
-{ int ph, k;
-
- switch (pi->mode) {
-
- case 0:
- case 1:
- case 2: w0(0x67); w2(1); w2(5);
- ph = 0;
- for(k=0;k<count;k++) {
- w0(buf[k]);
- w2(4+ph);
- ph = 1 - ph;
- }
- w2(7); w2(4);
- break;
-
- case 3: w3(0xc0);
- for(k=0;k<count;k++) w4(buf[k]);
- w2(4);
- break;
-
- case 4: w3(0xc0);
- for(k=0;k<(count/2);k++) w4w(((u16 *)buf)[k]);
- w2(4);
- break;
-
- case 5: w3(0xc0);
- for(k=0;k<(count/4);k++) w4l(((u32 *)buf)[k]);
- w2(4);
- break;
-
- }
-}
-
-/* these macros access the EPAT registers in native addressing */
-
-#define WR(r,v) epat_write_regr(pi,2,r,v)
-#define RR(r) (epat_read_regr(pi,2,r))
-
-/* and these access the IDE task file */
-
-#define WRi(r,v) epat_write_regr(pi,0,r,v)
-#define RRi(r) (epat_read_regr(pi,0,r))
-
-/* FIXME: the CPP stuff should be fixed to handle multiple EPATs on a chain */
-
-#define CPP(x) w2(4);w0(0x22);w0(0xaa);w0(0x55);w0(0);w0(0xff);\
- w0(0x87);w0(0x78);w0(x);w2(4);w2(5);w2(4);w0(0xff);
-
-static void epat_connect ( PIA *pi )
-
-{ pi->saved_r0 = r0();
- pi->saved_r2 = r2();
-
- /* Initialize the chip */
- CPP(0);
-
- if (epatc8) {
- CPP(0x40);CPP(0xe0);
- w0(0);w2(1);w2(4);
- WR(0x8,0x12);WR(0xc,0x14);WR(0x12,0x10);
- WR(0xe,0xf);WR(0xf,4);
- /* WR(0xe,0xa);WR(0xf,4); */
- WR(0xe,0xd);WR(0xf,0);
- /* CPP(0x30); */
- }
-
- /* Connect to the chip */
- CPP(0xe0);
- w0(0);w2(1);w2(4); /* Idle into SPP */
- if (pi->mode >= 3) {
- w0(0);w2(1);w2(4);w2(0xc);
- /* Request EPP */
- w0(0x40);w2(6);w2(7);w2(4);w2(0xc);w2(4);
- }
-
- if (!epatc8) {
- WR(8,0x10); WR(0xc,0x14); WR(0xa,0x38); WR(0x12,0x10);
- }
-}
-
-static void epat_disconnect (PIA *pi)
-{ CPP(0x30);
- w0(pi->saved_r0);
- w2(pi->saved_r2);
-}
-
-static int epat_test_proto( PIA *pi, char * scratch, int verbose )
-
-{ int k, j, f, cc;
- int e[2] = {0,0};
-
- epat_connect(pi);
- cc = RR(0xd);
- epat_disconnect(pi);
-
- epat_connect(pi);
- for (j=0;j<2;j++) {
- WRi(6,0xa0+j*0x10);
- for (k=0;k<256;k++) {
- WRi(2,k^0xaa);
- WRi(3,k^0x55);
- if (RRi(2) != (k^0xaa)) e[j]++;
- }
- }
- epat_disconnect(pi);
-
- f = 0;
- epat_connect(pi);
- WR(0x13,1); WR(0x13,0); WR(0xa,0x11);
- epat_read_block(pi,scratch,512);
-
- for (k=0;k<256;k++) {
- if ((scratch[2*k] & 0xff) != k) f++;
- if ((scratch[2*k+1] & 0xff) != (0xff-k)) f++;
- }
- epat_disconnect(pi);
-
- if (verbose) {
- printk("%s: epat: port 0x%x, mode %d, ccr %x, test=(%d,%d,%d)\n",
- pi->device,pi->port,pi->mode,cc,e[0],e[1],f);
- }
-
- return (e[0] && e[1]) || f;
-}
-
-static void epat_log_adapter( PIA *pi, char * scratch, int verbose )
-
-{ int ver;
- char *mode_string[6] =
- {"4-bit","5/3","8-bit","EPP-8","EPP-16","EPP-32"};
-
- epat_connect(pi);
- WR(0xa,0x38); /* read the version code */
- ver = RR(0xb);
- epat_disconnect(pi);
-
- printk("%s: epat %s, Shuttle EPAT chip %x at 0x%x, ",
- pi->device,EPAT_VERSION,ver,pi->port);
- printk("mode %d (%s), delay %d\n",pi->mode,
- mode_string[pi->mode],pi->delay);
-
-}
-
-static struct pi_protocol epat = {
- .owner = THIS_MODULE,
- .name = "epat",
- .max_mode = 6,
- .epp_first = 3,
- .default_delay = 1,
- .max_units = 1,
- .write_regr = epat_write_regr,
- .read_regr = epat_read_regr,
- .write_block = epat_write_block,
- .read_block = epat_read_block,
- .connect = epat_connect,
- .disconnect = epat_disconnect,
- .test_proto = epat_test_proto,
- .log_adapter = epat_log_adapter,
-};
-
-static int __init epat_init(void)
-{
-#ifdef CONFIG_PARIDE_EPATC8
- epatc8 = 1;
-#endif
- return paride_register(&epat);
-}
-
-static void __exit epat_exit(void)
-{
- paride_unregister(&epat);
-}
-
-MODULE_LICENSE("GPL");
-module_init(epat_init)
-module_exit(epat_exit)
diff --git a/drivers/block/paride/epia.c b/drivers/block/paride/epia.c
deleted file mode 100644
index fb0e782d055e..000000000000
--- a/drivers/block/paride/epia.c
+++ /dev/null
@@ -1,316 +0,0 @@
-/*
- epia.c (c) 1997-8 Grant R. Guenther <grant@xxxxxxxxxx>
- Under the terms of the GNU General Public License.
-
- epia.c is a low-level protocol driver for Shuttle Technologies
- EPIA parallel to IDE adapter chip. This device is now obsolete
- and has been replaced with the EPAT chip, which is supported
- by epat.c, however, some devices based on EPIA are still
- available.
-
-*/
-
-/* Changes:
-
- 1.01 GRG 1998.05.06 init_proto, release_proto
- 1.02 GRG 1998.06.17 support older versions of EPIA
-
-*/
-
-#define EPIA_VERSION "1.02"
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/wait.h>
-#include <asm/io.h>
-
-#include "paride.h"
-
-/* mode codes: 0 nybble reads on port 1, 8-bit writes
- 1 5/3 reads on ports 1 & 2, 8-bit writes
- 2 8-bit reads and writes
- 3 8-bit EPP mode
- 4 16-bit EPP
- 5 32-bit EPP
-*/
-
-#define j44(a,b) (((a>>4)&0x0f)+(b&0xf0))
-#define j53(a,b) (((a>>3)&0x1f)+((b<<4)&0xe0))
-
-/* cont = 0 IDE register file
- cont = 1 IDE control registers
-*/
-
-static int cont_map[2] = { 0, 0x80 };
-
-static int epia_read_regr( PIA *pi, int cont, int regr )
-
-{ int a, b, r;
-
- regr += cont_map[cont];
-
- switch (pi->mode) {
-
- case 0: r = regr^0x39;
- w0(r); w2(1); w2(3); w0(r);
- a = r1(); w2(1); b = r1(); w2(4);
- return j44(a,b);
-
- case 1: r = regr^0x31;
- w0(r); w2(1); w0(r&0x37);
- w2(3); w2(5); w0(r|0xf0);
- a = r1(); b = r2(); w2(4);
- return j53(a,b);
-
- case 2: r = regr^0x29;
- w0(r); w2(1); w2(0X21); w2(0x23);
- a = r0(); w2(4);
- return a;
-
- case 3:
- case 4:
- case 5: w3(regr); w2(0x24); a = r4(); w2(4);
- return a;
-
- }
- return -1;
-}
-
-static void epia_write_regr( PIA *pi, int cont, int regr, int val)
-
-{ int r;
-
- regr += cont_map[cont];
-
- switch (pi->mode) {
-
- case 0:
- case 1:
- case 2: r = regr^0x19;
- w0(r); w2(1); w0(val); w2(3); w2(4);
- break;
-
- case 3:
- case 4:
- case 5: r = regr^0x40;
- w3(r); w4(val); w2(4);
- break;
- }
-}
-
-#define WR(r,v) epia_write_regr(pi,0,r,v)
-#define RR(r) (epia_read_regr(pi,0,r))
-
-/* The use of register 0x84 is entirely unclear - it seems to control
- some EPP counters ... currently we know about 3 different block
- sizes: the standard 512 byte reads and writes, 12 byte writes and
- 2048 byte reads (the last two being used in the CDrom drivers.
-*/
-
-static void epia_connect ( PIA *pi )
-
-{ pi->saved_r0 = r0();
- pi->saved_r2 = r2();
-
- w2(4); w0(0xa0); w0(0x50); w0(0xc0); w0(0x30); w0(0xa0); w0(0);
- w2(1); w2(4);
- if (pi->mode >= 3) {
- w0(0xa); w2(1); w2(4); w0(0x82); w2(4); w2(0xc); w2(4);
- w2(0x24); w2(0x26); w2(4);
- }
- WR(0x86,8);
-}
-
-static void epia_disconnect ( PIA *pi )
-
-{ /* WR(0x84,0x10); */
- w0(pi->saved_r0);
- w2(1); w2(4);
- w0(pi->saved_r0);
- w2(pi->saved_r2);
-}
-
-static void epia_read_block( PIA *pi, char * buf, int count )
-
-{ int k, ph, a, b;
-
- switch (pi->mode) {
-
- case 0: w0(0x81); w2(1); w2(3); w0(0xc1);
- ph = 1;
- for (k=0;k<count;k++) {
- w2(2+ph); a = r1();
- w2(4+ph); b = r1();
- buf[k] = j44(a,b);
- ph = 1 - ph;
- }
- w0(0); w2(4);
- break;
-
- case 1: w0(0x91); w2(1); w0(0x10); w2(3);
- w0(0x51); w2(5); w0(0xd1);
- ph = 1;
- for (k=0;k<count;k++) {
- w2(4+ph);
- a = r1(); b = r2();
- buf[k] = j53(a,b);
- ph = 1 - ph;
- }
- w0(0); w2(4);
- break;
-
- case 2: w0(0x89); w2(1); w2(0x23); w2(0x21);
- ph = 1;
- for (k=0;k<count;k++) {
- w2(0x24+ph);
- buf[k] = r0();
- ph = 1 - ph;
- }
- w2(6); w2(4);
- break;
-
- case 3: if (count > 512) WR(0x84,3);
- w3(0); w2(0x24);
- for (k=0;k<count;k++) buf[k] = r4();
- w2(4); WR(0x84,0);
- break;
-
- case 4: if (count > 512) WR(0x84,3);
- w3(0); w2(0x24);
- for (k=0;k<count/2;k++) ((u16 *)buf)[k] = r4w();
- w2(4); WR(0x84,0);
- break;
-
- case 5: if (count > 512) WR(0x84,3);
- w3(0); w2(0x24);
- for (k=0;k<count/4;k++) ((u32 *)buf)[k] = r4l();
- w2(4); WR(0x84,0);
- break;
-
- }
-}
-
-static void epia_write_block( PIA *pi, char * buf, int count )
-
-{ int ph, k, last, d;
-
- switch (pi->mode) {
-
- case 0:
- case 1:
- case 2: w0(0xa1); w2(1); w2(3); w2(1); w2(5);
- ph = 0; last = 0x8000;
- for (k=0;k<count;k++) {
- d = buf[k];
- if (d != last) { last = d; w0(d); }
- w2(4+ph);
- ph = 1 - ph;
- }
- w2(7); w2(4);
- break;
-
- case 3: if (count < 512) WR(0x84,1);
- w3(0x40);
- for (k=0;k<count;k++) w4(buf[k]);
- if (count < 512) WR(0x84,0);
- break;
-
- case 4: if (count < 512) WR(0x84,1);
- w3(0x40);
- for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]);
- if (count < 512) WR(0x84,0);
- break;
-
- case 5: if (count < 512) WR(0x84,1);
- w3(0x40);
- for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]);
- if (count < 512) WR(0x84,0);
- break;
-
- }
-
-}
-
-static int epia_test_proto( PIA *pi, char * scratch, int verbose )
-
-{ int j, k, f;
- int e[2] = {0,0};
-
- epia_connect(pi);
- for (j=0;j<2;j++) {
- WR(6,0xa0+j*0x10);
- for (k=0;k<256;k++) {
- WR(2,k^0xaa);
- WR(3,k^0x55);
- if (RR(2) != (k^0xaa)) e[j]++;
- }
- WR(2,1); WR(3,1);
- }
- epia_disconnect(pi);
-
- f = 0;
- epia_connect(pi);
- WR(0x84,8);
- epia_read_block(pi,scratch,512);
- for (k=0;k<256;k++) {
- if ((scratch[2*k] & 0xff) != ((k+1) & 0xff)) f++;
- if ((scratch[2*k+1] & 0xff) != ((-2-k) & 0xff)) f++;
- }
- WR(0x84,0);
- epia_disconnect(pi);
-
- if (verbose) {
- printk("%s: epia: port 0x%x, mode %d, test=(%d,%d,%d)\n",
- pi->device,pi->port,pi->mode,e[0],e[1],f);
- }
-
- return (e[0] && e[1]) || f;
-
-}
-
-
-static void epia_log_adapter( PIA *pi, char * scratch, int verbose )
-
-{ char *mode_string[6] = {"4-bit","5/3","8-bit",
- "EPP-8","EPP-16","EPP-32"};
-
- printk("%s: epia %s, Shuttle EPIA at 0x%x, ",
- pi->device,EPIA_VERSION,pi->port);
- printk("mode %d (%s), delay %d\n",pi->mode,
- mode_string[pi->mode],pi->delay);
-
-}
-
-static struct pi_protocol epia = {
- .owner = THIS_MODULE,
- .name = "epia",
- .max_mode = 6,
- .epp_first = 3,
- .default_delay = 1,
- .max_units = 1,
- .write_regr = epia_write_regr,
- .read_regr = epia_read_regr,
- .write_block = epia_write_block,
- .read_block = epia_read_block,
- .connect = epia_connect,
- .disconnect = epia_disconnect,
- .test_proto = epia_test_proto,
- .log_adapter = epia_log_adapter,
-};
-
-static int __init epia_init(void)
-{
- return paride_register(&epia);
-}
-
-static void __exit epia_exit(void)
-{
- paride_unregister(&epia);
-}
-
-MODULE_LICENSE("GPL");
-module_init(epia_init)
-module_exit(epia_exit)
diff --git a/drivers/block/paride/fit2.c b/drivers/block/paride/fit2.c
deleted file mode 100644
index 381283753ae4..000000000000
--- a/drivers/block/paride/fit2.c
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- fit2.c (c) 1998 Grant R. Guenther <grant@xxxxxxxxxx>
- Under the terms of the GNU General Public License.
-
- fit2.c is a low-level protocol driver for the older version
- of the Fidelity International Technology parallel port adapter.
- This adapter is used in their TransDisk 2000 and older TransDisk
- 3000 portable hard-drives. As far as I can tell, this device
- supports 4-bit mode _only_.
-
- Newer models of the FIT products use an enhanced protocol.
- The "fit3" protocol module should support current drives.
-
-*/
-
-#define FIT2_VERSION "1.0"
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/wait.h>
-#include <asm/io.h>
-
-#include "paride.h"
-
-#define j44(a,b) (((a>>4)&0x0f)|(b&0xf0))
-
-/* cont = 0 - access the IDE register file
- cont = 1 - access the IDE command set
-
-NB: The FIT adapter does not appear to use the control registers.
-So, we map ALT_STATUS to STATUS and NO-OP writes to the device
-control register - this means that IDE reset will not work on these
-devices.
-
-*/
-
-static void fit2_write_regr( PIA *pi, int cont, int regr, int val)
-
-{ if (cont == 1) return;
- w2(0xc); w0(regr); w2(4); w0(val); w2(5); w0(0); w2(4);
-}
-
-static int fit2_read_regr( PIA *pi, int cont, int regr )
-
-{ int a, b, r;
-
- if (cont) {
- if (regr != 6) return 0xff;
- r = 7;
- } else r = regr + 0x10;
-
- w2(0xc); w0(r); w2(4); w2(5);
- w0(0); a = r1();
- w0(1); b = r1();
- w2(4);
-
- return j44(a,b);
-
-}
-
-static void fit2_read_block( PIA *pi, char * buf, int count )
-
-{ int k, a, b, c, d;
-
- w2(0xc); w0(0x10);
-
- for (k=0;k<count/4;k++) {
-
- w2(4); w2(5);
- w0(0); a = r1(); w0(1); b = r1();
- w0(3); c = r1(); w0(2); d = r1();
- buf[4*k+0] = j44(a,b);
- buf[4*k+1] = j44(d,c);
-
- w2(4); w2(5);
- a = r1(); w0(3); b = r1();
- w0(1); c = r1(); w0(0); d = r1();
- buf[4*k+2] = j44(d,c);
- buf[4*k+3] = j44(a,b);
-
- }
-
- w2(4);
-
-}
-
-static void fit2_write_block( PIA *pi, char * buf, int count )
-
-{ int k;
-
-
- w2(0xc); w0(0);
- for (k=0;k<count/2;k++) {
- w2(4); w0(buf[2*k]);
- w2(5); w0(buf[2*k+1]);
- }
- w2(4);
-}
-
-static void fit2_connect ( PIA *pi )
-
-{ pi->saved_r0 = r0();
- pi->saved_r2 = r2();
- w2(0xcc);
-}
-
-static void fit2_disconnect ( PIA *pi )
-
-{ w0(pi->saved_r0);
- w2(pi->saved_r2);
-}
-
-static void fit2_log_adapter( PIA *pi, char * scratch, int verbose )
-
-{ printk("%s: fit2 %s, FIT 2000 adapter at 0x%x, delay %d\n",
- pi->device,FIT2_VERSION,pi->port,pi->delay);
-
-}
-
-static struct pi_protocol fit2 = {
- .owner = THIS_MODULE,
- .name = "fit2",
- .max_mode = 1,
- .epp_first = 2,
- .default_delay = 1,
- .max_units = 1,
- .write_regr = fit2_write_regr,
- .read_regr = fit2_read_regr,
- .write_block = fit2_write_block,
- .read_block = fit2_read_block,
- .connect = fit2_connect,
- .disconnect = fit2_disconnect,
- .log_adapter = fit2_log_adapter,
-};
-
-static int __init fit2_init(void)
-{
- return paride_register(&fit2);
-}
-
-static void __exit fit2_exit(void)
-{
- paride_unregister(&fit2);
-}
-
-MODULE_LICENSE("GPL");
-module_init(fit2_init)
-module_exit(fit2_exit)
diff --git a/drivers/block/paride/fit3.c b/drivers/block/paride/fit3.c
deleted file mode 100644
index 275d269458eb..000000000000
--- a/drivers/block/paride/fit3.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- fit3.c (c) 1998 Grant R. Guenther <grant@xxxxxxxxxx>
- Under the terms of the GNU General Public License.
-
- fit3.c is a low-level protocol driver for newer models
- of the Fidelity International Technology parallel port adapter.
- This adapter is used in their TransDisk 3000 portable
- hard-drives, as well as CD-ROM, PD-CD and other devices.
-
- The TD-2000 and certain older devices use a different protocol.
- Try the fit2 protocol module with them.
-
- NB: The FIT adapters do not appear to support the control
- registers. So, we map ALT_STATUS to STATUS and NO-OP writes
- to the device control register - this means that IDE reset
- will not work on these devices.
-
-*/
-
-#define FIT3_VERSION "1.0"
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/wait.h>
-#include <asm/io.h>
-
-#include "paride.h"
-
-#define j44(a,b) (((a>>3)&0x0f)|((b<<1)&0xf0))
-
-#define w7(byte) {out_p(7,byte);}
-#define r7() (in_p(7) & 0xff)
-
-/* cont = 0 - access the IDE register file
- cont = 1 - access the IDE command set
-
-*/
-
-static void fit3_write_regr( PIA *pi, int cont, int regr, int val)
-
-{ if (cont == 1) return;
-
- switch (pi->mode) {
-
- case 0:
- case 1: w2(0xc); w0(regr); w2(0x8); w2(0xc);
- w0(val); w2(0xd);
- w0(0); w2(0xc);
- break;
-
- case 2: w2(0xc); w0(regr); w2(0x8); w2(0xc);
- w4(val); w4(0);
- w2(0xc);
- break;
-
- }
-}
-
-static int fit3_read_regr( PIA *pi, int cont, int regr )
-
-{ int a, b;
-
- if (cont) {
- if (regr != 6) return 0xff;
- regr = 7;
- }
-
- switch (pi->mode) {
-
- case 0: w2(0xc); w0(regr + 0x10); w2(0x8); w2(0xc);
- w2(0xd); a = r1();
- w2(0xf); b = r1();
- w2(0xc);
- return j44(a,b);
-
- case 1: w2(0xc); w0(regr + 0x90); w2(0x8); w2(0xc);
- w2(0xec); w2(0xee); w2(0xef); a = r0();
- w2(0xc);
- return a;
-
- case 2: w2(0xc); w0(regr + 0x90); w2(0x8); w2(0xc);
- w2(0xec);
- a = r4(); b = r4();
- w2(0xc);
- return a;
-
- }
- return -1;
-
-}
-
-static void fit3_read_block( PIA *pi, char * buf, int count )
-
-{ int k, a, b, c, d;
-
- switch (pi->mode) {
-
- case 0: w2(0xc); w0(0x10); w2(0x8); w2(0xc);
- for (k=0;k<count/2;k++) {
- w2(0xd); a = r1();
- w2(0xf); b = r1();
- w2(0xc); c = r1();
- w2(0xe); d = r1();
- buf[2*k ] = j44(a,b);
- buf[2*k+1] = j44(c,d);
- }
- w2(0xc);
- break;
-
- case 1: w2(0xc); w0(0x90); w2(0x8); w2(0xc);
- w2(0xec); w2(0xee);
- for (k=0;k<count/2;k++) {
- w2(0xef); a = r0();
- w2(0xee); b = r0();
- buf[2*k ] = a;
- buf[2*k+1] = b;
- }
- w2(0xec);
- w2(0xc);
- break;
-
- case 2: w2(0xc); w0(0x90); w2(0x8); w2(0xc);
- w2(0xec);
- for (k=0;k<count;k++) buf[k] = r4();
- w2(0xc);
- break;
-
- }
-}
-
-static void fit3_write_block( PIA *pi, char * buf, int count )
-
-{ int k;
-
- switch (pi->mode) {
-
- case 0:
- case 1: w2(0xc); w0(0); w2(0x8); w2(0xc);
- for (k=0;k<count/2;k++) {
- w0(buf[2*k ]); w2(0xd);
- w0(buf[2*k+1]); w2(0xc);
- }
- break;
-
- case 2: w2(0xc); w0(0); w2(0x8); w2(0xc);
- for (k=0;k<count;k++) w4(buf[k]);
- w2(0xc);
- break;
- }
-}
-
-static void fit3_connect ( PIA *pi )
-
-{ pi->saved_r0 = r0();
- pi->saved_r2 = r2();
- w2(0xc); w0(0); w2(0xa);
- if (pi->mode == 2) {
- w2(0xc); w0(0x9); w2(0x8); w2(0xc);
- }
-}
-
-static void fit3_disconnect ( PIA *pi )
-
-{ w2(0xc); w0(0xa); w2(0x8); w2(0xc);
- w0(pi->saved_r0);
- w2(pi->saved_r2);
-}
-
-static void fit3_log_adapter( PIA *pi, char * scratch, int verbose )
-
-{ char *mode_string[3] = {"4-bit","8-bit","EPP"};
-
- printk("%s: fit3 %s, FIT 3000 adapter at 0x%x, "
- "mode %d (%s), delay %d\n",
- pi->device,FIT3_VERSION,pi->port,
- pi->mode,mode_string[pi->mode],pi->delay);
-
-}
-
-static struct pi_protocol fit3 = {
- .owner = THIS_MODULE,
- .name = "fit3",
- .max_mode = 3,
- .epp_first = 2,
- .default_delay = 1,
- .max_units = 1,
- .write_regr = fit3_write_regr,
- .read_regr = fit3_read_regr,
- .write_block = fit3_write_block,
- .read_block = fit3_read_block,
- .connect = fit3_connect,
- .disconnect = fit3_disconnect,
- .log_adapter = fit3_log_adapter,
-};
-
-static int __init fit3_init(void)
-{
- return paride_register(&fit3);
-}
-
-static void __exit fit3_exit(void)
-{
- paride_unregister(&fit3);
-}
-
-MODULE_LICENSE("GPL");
-module_init(fit3_init)
-module_exit(fit3_exit)
diff --git a/drivers/block/paride/friq.c b/drivers/block/paride/friq.c
deleted file mode 100644
index 4f2ba244689b..000000000000
--- a/drivers/block/paride/friq.c
+++ /dev/null
@@ -1,276 +0,0 @@
-/*
- friq.c (c) 1998 Grant R. Guenther <grant@xxxxxxxxxx>
- Under the terms of the GNU General Public License
-
- friq.c is a low-level protocol driver for the Freecom "IQ"
- parallel port IDE adapter. Early versions of this adapter
- use the 'frpw' protocol.
-
- Freecom uses this adapter in a battery powered external
- CD-ROM drive. It is also used in LS-120 drives by
- Maxell and Panasonic, and other devices.
-
- The battery powered drive requires software support to
- control the power to the drive. This module enables the
- drive power when the high level driver (pcd) is loaded
- and disables it when the module is unloaded. Note, if
- the friq module is built in to the kernel, the power
- will never be switched off, so other means should be
- used to conserve battery power.
-
-*/
-
-/* Changes:
-
- 1.01 GRG 1998.12.20 Added support for soft power switch
-*/
-
-#define FRIQ_VERSION "1.01"
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/wait.h>
-#include <asm/io.h>
-
-#include "paride.h"
-
-#define CMD(x) w2(4);w0(0xff);w0(0xff);w0(0x73);w0(0x73);\
- w0(0xc9);w0(0xc9);w0(0x26);w0(0x26);w0(x);w0(x);
-
-#define j44(l,h) (((l>>4)&0x0f)|(h&0xf0))
-
-/* cont = 0 - access the IDE register file
- cont = 1 - access the IDE command set
-*/
-
-static int cont_map[2] = { 0x08, 0x10 };
-
-static int friq_read_regr( PIA *pi, int cont, int regr )
-
-{ int h,l,r;
-
- r = regr + cont_map[cont];
-
- CMD(r);
- w2(6); l = r1();
- w2(4); h = r1();
- w2(4);
-
- return j44(l,h);
-
-}
-
-static void friq_write_regr( PIA *pi, int cont, int regr, int val)
-
-{ int r;
-
- r = regr + cont_map[cont];
-
- CMD(r);
- w0(val);
- w2(5);w2(7);w2(5);w2(4);
-}
-
-static void friq_read_block_int( PIA *pi, char * buf, int count, int regr )
-
-{ int h, l, k, ph;
-
- switch(pi->mode) {
-
- case 0: CMD(regr);
- for (k=0;k<count;k++) {
- w2(6); l = r1();
- w2(4); h = r1();
- buf[k] = j44(l,h);
- }
- w2(4);
- break;
-
- case 1: ph = 2;
- CMD(regr+0xc0);
- w0(0xff);
- for (k=0;k<count;k++) {
- w2(0xa4 + ph);
- buf[k] = r0();
- ph = 2 - ph;
- }
- w2(0xac); w2(0xa4); w2(4);
- break;
-
- case 2: CMD(regr+0x80);
- for (k=0;k<count-2;k++) buf[k] = r4();
- w2(0xac); w2(0xa4);
- buf[count-2] = r4();
- buf[count-1] = r4();
- w2(4);
- break;
-
- case 3: CMD(regr+0x80);
- for (k=0;k<(count/2)-1;k++) ((u16 *)buf)[k] = r4w();
- w2(0xac); w2(0xa4);
- buf[count-2] = r4();
- buf[count-1] = r4();
- w2(4);
- break;
-
- case 4: CMD(regr+0x80);
- for (k=0;k<(count/4)-1;k++) ((u32 *)buf)[k] = r4l();
- buf[count-4] = r4();
- buf[count-3] = r4();
- w2(0xac); w2(0xa4);
- buf[count-2] = r4();
- buf[count-1] = r4();
- w2(4);
- break;
-
- }
-}
-
-static void friq_read_block( PIA *pi, char * buf, int count)
-
-{ friq_read_block_int(pi,buf,count,0x08);
-}
-
-static void friq_write_block( PIA *pi, char * buf, int count )
-
-{ int k;
-
- switch(pi->mode) {
-
- case 0:
- case 1: CMD(8); w2(5);
- for (k=0;k<count;k++) {
- w0(buf[k]);
- w2(7);w2(5);
- }
- w2(4);
- break;
-
- case 2: CMD(0xc8); w2(5);
- for (k=0;k<count;k++) w4(buf[k]);
- w2(4);
- break;
-
- case 3: CMD(0xc8); w2(5);
- for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]);
- w2(4);
- break;
-
- case 4: CMD(0xc8); w2(5);
- for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]);
- w2(4);
- break;
- }
-}
-
-static void friq_connect ( PIA *pi )
-
-{ pi->saved_r0 = r0();
- pi->saved_r2 = r2();
- w2(4);
-}
-
-static void friq_disconnect ( PIA *pi )
-
-{ CMD(0x20);
- w0(pi->saved_r0);
- w2(pi->saved_r2);
-}
-
-static int friq_test_proto( PIA *pi, char * scratch, int verbose )
-
-{ int j, k, r;
- int e[2] = {0,0};
-
- pi->saved_r0 = r0();
- w0(0xff); udelay(20); CMD(0x3d); /* turn the power on */
- udelay(500);
- w0(pi->saved_r0);
-
- friq_connect(pi);
- for (j=0;j<2;j++) {
- friq_write_regr(pi,0,6,0xa0+j*0x10);
- for (k=0;k<256;k++) {
- friq_write_regr(pi,0,2,k^0xaa);
- friq_write_regr(pi,0,3,k^0x55);
- if (friq_read_regr(pi,0,2) != (k^0xaa)) e[j]++;
- }
- }
- friq_disconnect(pi);
-
- friq_connect(pi);
- friq_read_block_int(pi,scratch,512,0x10);
- r = 0;
- for (k=0;k<128;k++) if (scratch[k] != k) r++;
- friq_disconnect(pi);
-
- if (verbose) {
- printk("%s: friq: port 0x%x, mode %d, test=(%d,%d,%d)\n",
- pi->device,pi->port,pi->mode,e[0],e[1],r);
- }
-
- return (r || (e[0] && e[1]));
-}
-
-
-static void friq_log_adapter( PIA *pi, char * scratch, int verbose )
-
-{ char *mode_string[6] = {"4-bit","8-bit",
- "EPP-8","EPP-16","EPP-32"};
-
- printk("%s: friq %s, Freecom IQ ASIC-2 adapter at 0x%x, ", pi->device,
- FRIQ_VERSION,pi->port);
- printk("mode %d (%s), delay %d\n",pi->mode,
- mode_string[pi->mode],pi->delay);
-
- pi->private = 1;
- friq_connect(pi);
- CMD(0x9e); /* disable sleep timer */
- friq_disconnect(pi);
-
-}
-
-static void friq_release_proto( PIA *pi)
-{
- if (pi->private) { /* turn off the power */
- friq_connect(pi);
- CMD(0x1d); CMD(0x1e);
- friq_disconnect(pi);
- pi->private = 0;
- }
-}
-
-static struct pi_protocol friq = {
- .owner = THIS_MODULE,
- .name = "friq",
- .max_mode = 5,
- .epp_first = 2,
- .default_delay = 1,
- .max_units = 1,
- .write_regr = friq_write_regr,
- .read_regr = friq_read_regr,
- .write_block = friq_write_block,
- .read_block = friq_read_block,
- .connect = friq_connect,
- .disconnect = friq_disconnect,
- .test_proto = friq_test_proto,
- .log_adapter = friq_log_adapter,
- .release_proto = friq_release_proto,
-};
-
-static int __init friq_init(void)
-{
- return paride_register(&friq);
-}
-
-static void __exit friq_exit(void)
-{
- paride_unregister(&friq);
-}
-
-MODULE_LICENSE("GPL");
-module_init(friq_init)
-module_exit(friq_exit)
diff --git a/drivers/block/paride/frpw.c b/drivers/block/paride/frpw.c
deleted file mode 100644
index c3cde364603a..000000000000
--- a/drivers/block/paride/frpw.c
+++ /dev/null
@@ -1,313 +0,0 @@
-/*
- frpw.c (c) 1996-8 Grant R. Guenther <grant@xxxxxxxxxx>
- Under the terms of the GNU General Public License
-
- frpw.c is a low-level protocol driver for the Freecom "Power"
- parallel port IDE adapter.
-
- Some applications of this adapter may require a "printer" reset
- prior to loading the driver. This can be done by loading and
- unloading the "lp" driver, or it can be done by this driver
- if you define FRPW_HARD_RESET. The latter is not recommended
- as it may upset devices on other ports.
-
-*/
-
-/* Changes:
-
- 1.01 GRG 1998.05.06 init_proto, release_proto
- fix chip detect
- added EPP-16 and EPP-32
- 1.02 GRG 1998.09.23 added hard reset to initialisation process
- 1.03 GRG 1998.12.14 made hard reset conditional
-
-*/
-
-#define FRPW_VERSION "1.03"
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/wait.h>
-#include <asm/io.h>
-
-#include "paride.h"
-
-#define cec4 w2(0xc);w2(0xe);w2(0xe);w2(0xc);w2(4);w2(4);w2(4);
-#define j44(l,h) (((l>>4)&0x0f)|(h&0xf0))
-
-/* cont = 0 - access the IDE register file
- cont = 1 - access the IDE command set
-*/
-
-static int cont_map[2] = { 0x08, 0x10 };
-
-static int frpw_read_regr( PIA *pi, int cont, int regr )
-
-{ int h,l,r;
-
- r = regr + cont_map[cont];
-
- w2(4);
- w0(r); cec4;
- w2(6); l = r1();
- w2(4); h = r1();
- w2(4);
-
- return j44(l,h);
-
-}
-
-static void frpw_write_regr( PIA *pi, int cont, int regr, int val)
-
-{ int r;
-
- r = regr + cont_map[cont];
-
- w2(4); w0(r); cec4;
- w0(val);
- w2(5);w2(7);w2(5);w2(4);
-}
-
-static void frpw_read_block_int( PIA *pi, char * buf, int count, int regr )
-
-{ int h, l, k, ph;
-
- switch(pi->mode) {
-
- case 0: w2(4); w0(regr); cec4;
- for (k=0;k<count;k++) {
- w2(6); l = r1();
- w2(4); h = r1();
- buf[k] = j44(l,h);
- }
- w2(4);
- break;
-
- case 1: ph = 2;
- w2(4); w0(regr + 0xc0); cec4;
- w0(0xff);
- for (k=0;k<count;k++) {
- w2(0xa4 + ph);
- buf[k] = r0();
- ph = 2 - ph;
- }
- w2(0xac); w2(0xa4); w2(4);
- break;
-
- case 2: w2(4); w0(regr + 0x80); cec4;
- for (k=0;k<count;k++) buf[k] = r4();
- w2(0xac); w2(0xa4);
- w2(4);
- break;
-
- case 3: w2(4); w0(regr + 0x80); cec4;
- for (k=0;k<count-2;k++) buf[k] = r4();
- w2(0xac); w2(0xa4);
- buf[count-2] = r4();
- buf[count-1] = r4();
- w2(4);
- break;
-
- case 4: w2(4); w0(regr + 0x80); cec4;
- for (k=0;k<(count/2)-1;k++) ((u16 *)buf)[k] = r4w();
- w2(0xac); w2(0xa4);
- buf[count-2] = r4();
- buf[count-1] = r4();
- w2(4);
- break;
-
- case 5: w2(4); w0(regr + 0x80); cec4;
- for (k=0;k<(count/4)-1;k++) ((u32 *)buf)[k] = r4l();
- buf[count-4] = r4();
- buf[count-3] = r4();
- w2(0xac); w2(0xa4);
- buf[count-2] = r4();
- buf[count-1] = r4();
- w2(4);
- break;
-
- }
-}
-
-static void frpw_read_block( PIA *pi, char * buf, int count)
-
-{ frpw_read_block_int(pi,buf,count,0x08);
-}
-
-static void frpw_write_block( PIA *pi, char * buf, int count )
-
-{ int k;
-
- switch(pi->mode) {
-
- case 0:
- case 1:
- case 2: w2(4); w0(8); cec4; w2(5);
- for (k=0;k<count;k++) {
- w0(buf[k]);
- w2(7);w2(5);
- }
- w2(4);
- break;
-
- case 3: w2(4); w0(0xc8); cec4; w2(5);
- for (k=0;k<count;k++) w4(buf[k]);
- w2(4);
- break;
-
- case 4: w2(4); w0(0xc8); cec4; w2(5);
- for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]);
- w2(4);
- break;
-
- case 5: w2(4); w0(0xc8); cec4; w2(5);
- for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]);
- w2(4);
- break;
- }
-}
-
-static void frpw_connect ( PIA *pi )
-
-{ pi->saved_r0 = r0();
- pi->saved_r2 = r2();
- w2(4);
-}
-
-static void frpw_disconnect ( PIA *pi )
-
-{ w2(4); w0(0x20); cec4;
- w0(pi->saved_r0);
- w2(pi->saved_r2);
-}
-
-/* Stub logic to see if PNP string is available - used to distinguish
- between the Xilinx and ASIC implementations of the Freecom adapter.
-*/
-
-static int frpw_test_pnp ( PIA *pi )
-
-/* returns chip_type: 0 = Xilinx, 1 = ASIC */
-
-{ int olddelay, a, b;
-
-#ifdef FRPW_HARD_RESET
- w0(0); w2(8); udelay(50); w2(0xc); /* parallel bus reset */
- mdelay(1500);
-#endif
-
- olddelay = pi->delay;
- pi->delay = 10;
-
- pi->saved_r0 = r0();
- pi->saved_r2 = r2();
-
- w2(4); w0(4); w2(6); w2(7);
- a = r1() & 0xff; w2(4); b = r1() & 0xff;
- w2(0xc); w2(0xe); w2(4);
-
- pi->delay = olddelay;
- w0(pi->saved_r0);
- w2(pi->saved_r2);
-
- return ((~a&0x40) && (b&0x40));
-}
-
-/* We use the pi->private to remember the result of the PNP test.
- To make this work, private = port*2 + chip. Yes, I know it's
- a hack :-(
-*/
-
-static int frpw_test_proto( PIA *pi, char * scratch, int verbose )
-
-{ int j, k, r;
- int e[2] = {0,0};
-
- if ((pi->private>>1) != pi->port)
- pi->private = frpw_test_pnp(pi) + 2*pi->port;
-
- if (((pi->private%2) == 0) && (pi->mode > 2)) {
- if (verbose)
- printk("%s: frpw: Xilinx does not support mode %d\n",
- pi->device, pi->mode);
- return 1;
- }
-
- if (((pi->private%2) == 1) && (pi->mode == 2)) {
- if (verbose)
- printk("%s: frpw: ASIC does not support mode 2\n",
- pi->device);
- return 1;
- }
-
- frpw_connect(pi);
- for (j=0;j<2;j++) {
- frpw_write_regr(pi,0,6,0xa0+j*0x10);
- for (k=0;k<256;k++) {
- frpw_write_regr(pi,0,2,k^0xaa);
- frpw_write_regr(pi,0,3,k^0x55);
- if (frpw_read_regr(pi,0,2) != (k^0xaa)) e[j]++;
- }
- }
- frpw_disconnect(pi);
-
- frpw_connect(pi);
- frpw_read_block_int(pi,scratch,512,0x10);
- r = 0;
- for (k=0;k<128;k++) if (scratch[k] != k) r++;
- frpw_disconnect(pi);
-
- if (verbose) {
- printk("%s: frpw: port 0x%x, chip %ld, mode %d, test=(%d,%d,%d)\n",
- pi->device,pi->port,(pi->private%2),pi->mode,e[0],e[1],r);
- }
-
- return (r || (e[0] && e[1]));
-}
-
-
-static void frpw_log_adapter( PIA *pi, char * scratch, int verbose )
-
-{ char *mode_string[6] = {"4-bit","8-bit","EPP",
- "EPP-8","EPP-16","EPP-32"};
-
- printk("%s: frpw %s, Freecom (%s) adapter at 0x%x, ", pi->device,
- FRPW_VERSION,((pi->private%2) == 0)?"Xilinx":"ASIC",pi->port);
- printk("mode %d (%s), delay %d\n",pi->mode,
- mode_string[pi->mode],pi->delay);
-
-}
-
-static struct pi_protocol frpw = {
- .owner = THIS_MODULE,
- .name = "frpw",
- .max_mode = 6,
- .epp_first = 2,
- .default_delay = 2,
- .max_units = 1,
- .write_regr = frpw_write_regr,
- .read_regr = frpw_read_regr,
- .write_block = frpw_write_block,
- .read_block = frpw_read_block,
- .connect = frpw_connect,
- .disconnect = frpw_disconnect,
- .test_proto = frpw_test_proto,
- .log_adapter = frpw_log_adapter,
-};
-
-static int __init frpw_init(void)
-{
- return paride_register(&frpw);
-}
-
-static void __exit frpw_exit(void)
-{
- paride_unregister(&frpw);
-}
-
-MODULE_LICENSE("GPL");
-module_init(frpw_init)
-module_exit(frpw_exit)
diff --git a/drivers/block/paride/kbic.c b/drivers/block/paride/kbic.c
deleted file mode 100644
index 35999c415ee3..000000000000
--- a/drivers/block/paride/kbic.c
+++ /dev/null
@@ -1,305 +0,0 @@
-/*
- kbic.c (c) 1997-8 Grant R. Guenther <grant@xxxxxxxxxx>
- Under the terms of the GNU General Public License.
-
- This is a low-level driver for the KBIC-951A and KBIC-971A
- parallel to IDE adapter chips from KingByte Information Systems.
-
- The chips are almost identical, however, the wakeup code
- required for the 971A interferes with the correct operation of
- the 951A, so this driver registers itself twice, once for
- each chip.
-
-*/
-
-/* Changes:
-
- 1.01 GRG 1998.05.06 init_proto, release_proto
-
-*/
-
-#define KBIC_VERSION "1.01"
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/wait.h>
-#include <asm/io.h>
-
-#include "paride.h"
-
-#define r12w() (delay_p,inw(pi->port+1)&0xffff)
-
-#define j44(a,b) ((((a>>4)&0x0f)|(b&0xf0))^0x88)
-#define j53(w) (((w>>3)&0x1f)|((w>>4)&0xe0))
-
-
-/* cont = 0 - access the IDE register file
- cont = 1 - access the IDE command set
-*/
-
-static int cont_map[2] = { 0x80, 0x40 };
-
-static int kbic_read_regr( PIA *pi, int cont, int regr )
-
-{ int a, b, s;
-
- s = cont_map[cont];
-
- switch (pi->mode) {
-
- case 0: w0(regr|0x18|s); w2(4); w2(6); w2(4); w2(1); w0(8);
- a = r1(); w0(0x28); b = r1(); w2(4);
- return j44(a,b);
-
- case 1: w0(regr|0x38|s); w2(4); w2(6); w2(4); w2(5); w0(8);
- a = r12w(); w2(4);
- return j53(a);
-
- case 2: w0(regr|0x08|s); w2(4); w2(6); w2(4); w2(0xa5); w2(0xa1);
- a = r0(); w2(4);
- return a;
-
- case 3:
- case 4:
- case 5: w0(0x20|s); w2(4); w2(6); w2(4); w3(regr);
- a = r4(); b = r4(); w2(4); w2(0); w2(4);
- return a;
-
- }
- return -1;
-}
-
-static void kbic_write_regr( PIA *pi, int cont, int regr, int val)
-
-{ int s;
-
- s = cont_map[cont];
-
- switch (pi->mode) {
-
- case 0:
- case 1:
- case 2: w0(regr|0x10|s); w2(4); w2(6); w2(4);
- w0(val); w2(5); w2(4);
- break;
-
- case 3:
- case 4:
- case 5: w0(0x20|s); w2(4); w2(6); w2(4); w3(regr);
- w4(val); w4(val);
- w2(4); w2(0); w2(4);
- break;
-
- }
-}
-
-static void k951_connect ( PIA *pi )
-
-{ pi->saved_r0 = r0();
- pi->saved_r2 = r2();
- w2(4);
-}
-
-static void k951_disconnect ( PIA *pi )
-
-{ w0(pi->saved_r0);
- w2(pi->saved_r2);
-}
-
-#define CCP(x) w2(0xc4);w0(0xaa);w0(0x55);w0(0);w0(0xff);w0(0x87);\
- w0(0x78);w0(x);w2(0xc5);w2(0xc4);w0(0xff);
-
-static void k971_connect ( PIA *pi )
-
-{ pi->saved_r0 = r0();
- pi->saved_r2 = r2();
- CCP(0x20);
- w2(4);
-}
-
-static void k971_disconnect ( PIA *pi )
-
-{ CCP(0x30);
- w0(pi->saved_r0);
- w2(pi->saved_r2);
-}
-
-/* counts must be congruent to 0 MOD 4, but all known applications
- have this property.
-*/
-
-static void kbic_read_block( PIA *pi, char * buf, int count )
-
-{ int k, a, b;
-
- switch (pi->mode) {
-
- case 0: w0(0x98); w2(4); w2(6); w2(4);
- for (k=0;k<count/2;k++) {
- w2(1); w0(8); a = r1();
- w0(0x28); b = r1();
- buf[2*k] = j44(a,b);
- w2(5); b = r1();
- w0(8); a = r1();
- buf[2*k+1] = j44(a,b);
- w2(4);
- }
- break;
-
- case 1: w0(0xb8); w2(4); w2(6); w2(4);
- for (k=0;k<count/4;k++) {
- w0(0xb8);
- w2(4); w2(5);
- w0(8); buf[4*k] = j53(r12w());
- w0(0xb8); buf[4*k+1] = j53(r12w());
- w2(4); w2(5);
- buf[4*k+3] = j53(r12w());
- w0(8); buf[4*k+2] = j53(r12w());
- }
- w2(4);
- break;
-
- case 2: w0(0x88); w2(4); w2(6); w2(4);
- for (k=0;k<count/2;k++) {
- w2(0xa0); w2(0xa1); buf[2*k] = r0();
- w2(0xa5); buf[2*k+1] = r0();
- }
- w2(4);
- break;
-
- case 3: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
- for (k=0;k<count;k++) buf[k] = r4();
- w2(4); w2(0); w2(4);
- break;
-
- case 4: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
- for (k=0;k<count/2;k++) ((u16 *)buf)[k] = r4w();
- w2(4); w2(0); w2(4);
- break;
-
- case 5: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
- for (k=0;k<count/4;k++) ((u32 *)buf)[k] = r4l();
- w2(4); w2(0); w2(4);
- break;
-
-
- }
-}
-
-static void kbic_write_block( PIA *pi, char * buf, int count )
-
-{ int k;
-
- switch (pi->mode) {
-
- case 0:
- case 1:
- case 2: w0(0x90); w2(4); w2(6); w2(4);
- for(k=0;k<count/2;k++) {
- w0(buf[2*k+1]); w2(0); w2(4);
- w0(buf[2*k]); w2(5); w2(4);
- }
- break;
-
- case 3: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
- for(k=0;k<count/2;k++) {
- w4(buf[2*k+1]);
- w4(buf[2*k]);
- }
- w2(4); w2(0); w2(4);
- break;
-
- case 4: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
- for(k=0;k<count/2;k++) w4w(pi_swab16(buf,k));
- w2(4); w2(0); w2(4);
- break;
-
- case 5: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
- for(k=0;k<count/4;k++) w4l(pi_swab32(buf,k));
- w2(4); w2(0); w2(4);
- break;
-
- }
-
-}
-
-static void kbic_log_adapter( PIA *pi, char * scratch,
- int verbose, char * chip )
-
-{ char *mode_string[6] = {"4-bit","5/3","8-bit",
- "EPP-8","EPP_16","EPP-32"};
-
- printk("%s: kbic %s, KingByte %s at 0x%x, ",
- pi->device,KBIC_VERSION,chip,pi->port);
- printk("mode %d (%s), delay %d\n",pi->mode,
- mode_string[pi->mode],pi->delay);
-
-}
-
-static void k951_log_adapter( PIA *pi, char * scratch, int verbose )
-
-{ kbic_log_adapter(pi,scratch,verbose,"KBIC-951A");
-}
-
-static void k971_log_adapter( PIA *pi, char * scratch, int verbose )
-
-{ kbic_log_adapter(pi,scratch,verbose,"KBIC-971A");
-}
-
-static struct pi_protocol k951 = {
- .owner = THIS_MODULE,
- .name = "k951",
- .max_mode = 6,
- .epp_first = 3,
- .default_delay = 1,
- .max_units = 1,
- .write_regr = kbic_write_regr,
- .read_regr = kbic_read_regr,
- .write_block = kbic_write_block,
- .read_block = kbic_read_block,
- .connect = k951_connect,
- .disconnect = k951_disconnect,
- .log_adapter = k951_log_adapter,
-};
-
-static struct pi_protocol k971 = {
- .owner = THIS_MODULE,
- .name = "k971",
- .max_mode = 6,
- .epp_first = 3,
- .default_delay = 1,
- .max_units = 1,
- .write_regr = kbic_write_regr,
- .read_regr = kbic_read_regr,
- .write_block = kbic_write_block,
- .read_block = kbic_read_block,
- .connect = k971_connect,
- .disconnect = k971_disconnect,
- .log_adapter = k971_log_adapter,
-};
-
-static int __init kbic_init(void)
-{
- int rv;
-
- rv = paride_register(&k951);
- if (rv < 0)
- return rv;
- rv = paride_register(&k971);
- if (rv < 0)
- paride_unregister(&k951);
- return rv;
-}
-
-static void __exit kbic_exit(void)
-{
- paride_unregister(&k951);
- paride_unregister(&k971);
-}
-
-MODULE_LICENSE("GPL");
-module_init(kbic_init)
-module_exit(kbic_exit)
diff --git a/drivers/block/paride/ktti.c b/drivers/block/paride/ktti.c
deleted file mode 100644
index 117ab0e8ccf0..000000000000
--- a/drivers/block/paride/ktti.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- ktti.c (c) 1998 Grant R. Guenther <grant@xxxxxxxxxx>
- Under the terms of the GNU General Public License.
-
- ktti.c is a low-level protocol driver for the KT Technology
- parallel port adapter. This adapter is used in the "PHd"
- portable hard-drives. As far as I can tell, this device
- supports 4-bit mode _only_.
-
-*/
-
-#define KTTI_VERSION "1.0"
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/wait.h>
-#include <asm/io.h>
-
-#include "paride.h"
-
-#define j44(a,b) (((a>>4)&0x0f)|(b&0xf0))
-
-/* cont = 0 - access the IDE register file
- cont = 1 - access the IDE command set
-*/
-
-static int cont_map[2] = { 0x10, 0x08 };
-
-static void ktti_write_regr( PIA *pi, int cont, int regr, int val)
-
-{ int r;
-
- r = regr + cont_map[cont];
-
- w0(r); w2(0xb); w2(0xa); w2(3); w2(6);
- w0(val); w2(3); w0(0); w2(6); w2(0xb);
-}
-
-static int ktti_read_regr( PIA *pi, int cont, int regr )
-
-{ int a, b, r;
-
- r = regr + cont_map[cont];
-
- w0(r); w2(0xb); w2(0xa); w2(9); w2(0xc); w2(9);
- a = r1(); w2(0xc); b = r1(); w2(9); w2(0xc); w2(9);
- return j44(a,b);
-
-}
-
-static void ktti_read_block( PIA *pi, char * buf, int count )
-
-{ int k, a, b;
-
- for (k=0;k<count/2;k++) {
- w0(0x10); w2(0xb); w2(0xa); w2(9); w2(0xc); w2(9);
- a = r1(); w2(0xc); b = r1(); w2(9);
- buf[2*k] = j44(a,b);
- a = r1(); w2(0xc); b = r1(); w2(9);
- buf[2*k+1] = j44(a,b);
- }
-}
-
-static void ktti_write_block( PIA *pi, char * buf, int count )
-
-{ int k;
-
- for (k=0;k<count/2;k++) {
- w0(0x10); w2(0xb); w2(0xa); w2(3); w2(6);
- w0(buf[2*k]); w2(3);
- w0(buf[2*k+1]); w2(6);
- w2(0xb);
- }
-}
-
-static void ktti_connect ( PIA *pi )
-
-{ pi->saved_r0 = r0();
- pi->saved_r2 = r2();
- w2(0xb); w2(0xa); w0(0); w2(3); w2(6);
-}
-
-static void ktti_disconnect ( PIA *pi )
-
-{ w2(0xb); w2(0xa); w0(0xa0); w2(3); w2(4);
- w0(pi->saved_r0);
- w2(pi->saved_r2);
-}
-
-static void ktti_log_adapter( PIA *pi, char * scratch, int verbose )
-
-{ printk("%s: ktti %s, KT adapter at 0x%x, delay %d\n",
- pi->device,KTTI_VERSION,pi->port,pi->delay);
-
-}
-
-static struct pi_protocol ktti = {
- .owner = THIS_MODULE,
- .name = "ktti",
- .max_mode = 1,
- .epp_first = 2,
- .default_delay = 1,
- .max_units = 1,
- .write_regr = ktti_write_regr,
- .read_regr = ktti_read_regr,
- .write_block = ktti_write_block,
- .read_block = ktti_read_block,
- .connect = ktti_connect,
- .disconnect = ktti_disconnect,
- .log_adapter = ktti_log_adapter,
-};
-
-static int __init ktti_init(void)
-{
- return paride_register(&ktti);
-}
-
-static void __exit ktti_exit(void)
-{
- paride_unregister(&ktti);
-}
-
-MODULE_LICENSE("GPL");
-module_init(ktti_init)
-module_exit(ktti_exit)
diff --git a/drivers/block/paride/mkd b/drivers/block/paride/mkd
deleted file mode 100644
index 6d0d802479ea..000000000000
--- a/drivers/block/paride/mkd
+++ /dev/null
@@ -1,31 +0,0 @@
-#!/bin/bash
-# SPDX-License-Identifier: GPL-2.0
-#
-# mkd -- a script to create the device special files for the PARIDE subsystem
-#
-# block devices: pd (45), pcd (46), pf (47)
-# character devices: pt (96), pg (97)
-#
-function mkdev {
- mknod $1 $2 $3 $4 ; chmod 0660 $1 ; chown root:disk $1
-}
-#
-function pd {
- D=$( printf \\$( printf "x%03x" $[ $1 + 97 ] ) )
- mkdev pd$D b 45 $[ $1 * 16 ]
- for P in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
- do mkdev pd$D$P b 45 $[ $1 * 16 + $P ]
- done
-}
-#
-cd /dev
-#
-for u in 0 1 2 3 ; do pd $u ; done
-for u in 0 1 2 3 ; do mkdev pcd$u b 46 $u ; done
-for u in 0 1 2 3 ; do mkdev pf$u b 47 $u ; done
-for u in 0 1 2 3 ; do mkdev pt$u c 96 $u ; done
-for u in 0 1 2 3 ; do mkdev npt$u c 96 $[ $u + 128 ] ; done
-for u in 0 1 2 3 ; do mkdev pg$u c 97 $u ; done
-#
-# end of mkd
-
diff --git a/drivers/block/paride/on20.c b/drivers/block/paride/on20.c
deleted file mode 100644
index 0173697a1a4d..000000000000
--- a/drivers/block/paride/on20.c
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- on20.c (c) 1996-8 Grant R. Guenther <grant@xxxxxxxxxx>
- Under the terms of the GNU General Public License.
-
- on20.c is a low-level protocol driver for the
- Onspec 90c20 parallel to IDE adapter.
-*/
-
-/* Changes:
-
- 1.01 GRG 1998.05.06 init_proto, release_proto
-
-*/
-
-#define ON20_VERSION "1.01"
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/wait.h>
-#include <asm/io.h>
-
-#include "paride.h"
-
-#define op(f) w2(4);w0(f);w2(5);w2(0xd);w2(5);w2(0xd);w2(5);w2(4);
-#define vl(v) w2(4);w0(v);w2(5);w2(7);w2(5);w2(4);
-
-#define j44(a,b) (((a>>4)&0x0f)|(b&0xf0))
-
-/* cont = 0 - access the IDE register file
- cont = 1 - access the IDE command set
-*/
-
-static int on20_read_regr( PIA *pi, int cont, int regr )
-
-{ int h,l, r ;
-
- r = (regr<<2) + 1 + cont;
-
- op(1); vl(r); op(0);
-
- switch (pi->mode) {
-
- case 0: w2(4); w2(6); l = r1();
- w2(4); w2(6); h = r1();
- w2(4); w2(6); w2(4); w2(6); w2(4);
- return j44(l,h);
-
- case 1: w2(4); w2(0x26); r = r0();
- w2(4); w2(0x26); w2(4);
- return r;
-
- }
- return -1;
-}
-
-static void on20_write_regr( PIA *pi, int cont, int regr, int val )
-
-{ int r;
-
- r = (regr<<2) + 1 + cont;
-
- op(1); vl(r);
- op(0); vl(val);
- op(0); vl(val);
-}
-
-static void on20_connect ( PIA *pi)
-
-{ pi->saved_r0 = r0();
- pi->saved_r2 = r2();
-
- w2(4);w0(0);w2(0xc);w2(4);w2(6);w2(4);w2(6);w2(4);
- if (pi->mode) { op(2); vl(8); op(2); vl(9); }
- else { op(2); vl(0); op(2); vl(8); }
-}
-
-static void on20_disconnect ( PIA *pi )
-
-{ w2(4);w0(7);w2(4);w2(0xc);w2(4);
- w0(pi->saved_r0);
- w2(pi->saved_r2);
-}
-
-static void on20_read_block( PIA *pi, char * buf, int count )
-
-{ int k, l, h;
-
- op(1); vl(1); op(0);
-
- for (k=0;k<count;k++)
- if (pi->mode) {
- w2(4); w2(0x26); buf[k] = r0();
- } else {
- w2(6); l = r1(); w2(4);
- w2(6); h = r1(); w2(4);
- buf[k] = j44(l,h);
- }
- w2(4);
-}
-
-static void on20_write_block( PIA *pi, char * buf, int count )
-
-{ int k;
-
- op(1); vl(1); op(0);
-
- for (k=0;k<count;k++) { w2(5); w0(buf[k]); w2(7); }
- w2(4);
-}
-
-static void on20_log_adapter( PIA *pi, char * scratch, int verbose )
-
-{ char *mode_string[2] = {"4-bit","8-bit"};
-
- printk("%s: on20 %s, OnSpec 90c20 at 0x%x, ",
- pi->device,ON20_VERSION,pi->port);
- printk("mode %d (%s), delay %d\n",pi->mode,
- mode_string[pi->mode],pi->delay);
-
-}
-
-static struct pi_protocol on20 = {
- .owner = THIS_MODULE,
- .name = "on20",
- .max_mode = 2,
- .epp_first = 2,
- .default_delay = 1,
- .max_units = 1,
- .write_regr = on20_write_regr,
- .read_regr = on20_read_regr,
- .write_block = on20_write_block,
- .read_block = on20_read_block,
- .connect = on20_connect,
- .disconnect = on20_disconnect,
- .log_adapter = on20_log_adapter,
-};
-
-static int __init on20_init(void)
-{
- return paride_register(&on20);
-}
-
-static void __exit on20_exit(void)
-{
- paride_unregister(&on20);
-}
-
-MODULE_LICENSE("GPL");
-module_init(on20_init)
-module_exit(on20_exit)
diff --git a/drivers/block/paride/on26.c b/drivers/block/paride/on26.c
deleted file mode 100644
index 95ba256921f2..000000000000
--- a/drivers/block/paride/on26.c
+++ /dev/null
@@ -1,319 +0,0 @@
-/*
- on26.c (c) 1997-8 Grant R. Guenther <grant@xxxxxxxxxx>
- Under the terms of the GNU General Public License.
-
- on26.c is a low-level protocol driver for the
- OnSpec 90c26 parallel to IDE adapter chip.
-
-*/
-
-/* Changes:
-
- 1.01 GRG 1998.05.06 init_proto, release_proto
- 1.02 GRG 1998.09.23 updates for the -E rev chip
- 1.03 GRG 1998.12.14 fix for slave drives
- 1.04 GRG 1998.12.20 yet another bug fix
-
-*/
-
-#define ON26_VERSION "1.04"
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/wait.h>
-#include <asm/io.h>
-
-#include "paride.h"
-
-/* mode codes: 0 nybble reads, 8-bit writes
- 1 8-bit reads and writes
- 2 8-bit EPP mode
- 3 EPP-16
- 4 EPP-32
-*/
-
-#define j44(a,b) (((a>>4)&0x0f)|(b&0xf0))
-
-#define P1 w2(5);w2(0xd);w2(5);w2(0xd);w2(5);w2(4);
-#define P2 w2(5);w2(7);w2(5);w2(4);
-
-/* cont = 0 - access the IDE register file
- cont = 1 - access the IDE command set
-*/
-
-static int on26_read_regr( PIA *pi, int cont, int regr )
-
-{ int a, b, r;
-
- r = (regr<<2) + 1 + cont;
-
- switch (pi->mode) {
-
- case 0: w0(1); P1; w0(r); P2; w0(0); P1;
- w2(6); a = r1(); w2(4);
- w2(6); b = r1(); w2(4);
- w2(6); w2(4); w2(6); w2(4);
- return j44(a,b);
-
- case 1: w0(1); P1; w0(r); P2; w0(0); P1;
- w2(0x26); a = r0(); w2(4); w2(0x26); w2(4);
- return a;
-
- case 2:
- case 3:
- case 4: w3(1); w3(1); w2(5); w4(r); w2(4);
- w3(0); w3(0); w2(0x24); a = r4(); w2(4);
- w2(0x24); (void)r4(); w2(4);
- return a;
-
- }
- return -1;
-}
-
-static void on26_write_regr( PIA *pi, int cont, int regr, int val )
-
-{ int r;
-
- r = (regr<<2) + 1 + cont;
-
- switch (pi->mode) {
-
- case 0:
- case 1: w0(1); P1; w0(r); P2; w0(0); P1;
- w0(val); P2; w0(val); P2;
- break;
-
- case 2:
- case 3:
- case 4: w3(1); w3(1); w2(5); w4(r); w2(4);
- w3(0); w3(0);
- w2(5); w4(val); w2(4);
- w2(5); w4(val); w2(4);
- break;
- }
-}
-
-#define CCP(x) w0(0xfe);w0(0xaa);w0(0x55);w0(0);w0(0xff);\
- w0(0x87);w0(0x78);w0(x);w2(4);w2(5);w2(4);w0(0xff);
-
-static void on26_connect ( PIA *pi )
-
-{ int x;
-
- pi->saved_r0 = r0();
- pi->saved_r2 = r2();
-
- CCP(0x20);
- x = 8; if (pi->mode) x = 9;
-
- w0(2); P1; w0(8); P2;
- w0(2); P1; w0(x); P2;
-}
-
-static void on26_disconnect ( PIA *pi )
-
-{ if (pi->mode >= 2) { w3(4); w3(4); w3(4); w3(4); }
- else { w0(4); P1; w0(4); P1; }
- CCP(0x30);
- w0(pi->saved_r0);
- w2(pi->saved_r2);
-}
-
-#define RESET_WAIT 200
-
-static int on26_test_port( PIA *pi) /* hard reset */
-
-{ int i, m, d, x=0, y=0;
-
- pi->saved_r0 = r0();
- pi->saved_r2 = r2();
-
- d = pi->delay;
- m = pi->mode;
- pi->delay = 5;
- pi->mode = 0;
-
- w2(0xc);
-
- CCP(0x30); CCP(0);
-
- w0(0xfe);w0(0xaa);w0(0x55);w0(0);w0(0xff);
- i = ((r1() & 0xf0) << 4); w0(0x87);
- i |= (r1() & 0xf0); w0(0x78);
- w0(0x20);w2(4);w2(5);
- i |= ((r1() & 0xf0) >> 4);
- w2(4);w0(0xff);
-
- if (i == 0xb5f) {
-
- w0(2); P1; w0(0); P2;
- w0(3); P1; w0(0); P2;
- w0(2); P1; w0(8); P2; udelay(100);
- w0(2); P1; w0(0xa); P2; udelay(100);
- w0(2); P1; w0(8); P2; udelay(1000);
-
- on26_write_regr(pi,0,6,0xa0);
-
- for (i=0;i<RESET_WAIT;i++) {
- on26_write_regr(pi,0,6,0xa0);
- x = on26_read_regr(pi,0,7);
- on26_write_regr(pi,0,6,0xb0);
- y = on26_read_regr(pi,0,7);
- if (!((x&0x80)||(y&0x80))) break;
- mdelay(100);
- }
-
- if (i == RESET_WAIT)
- printk("on26: Device reset failed (%x,%x)\n",x,y);
-
- w0(4); P1; w0(4); P1;
- }
-
- CCP(0x30);
-
- pi->delay = d;
- pi->mode = m;
- w0(pi->saved_r0);
- w2(pi->saved_r2);
-
- return 5;
-}
-
-
-static void on26_read_block( PIA *pi, char * buf, int count )
-
-{ int k, a, b;
-
- switch (pi->mode) {
-
- case 0: w0(1); P1; w0(1); P2; w0(2); P1; w0(0x18); P2; w0(0); P1;
- udelay(10);
- for (k=0;k<count;k++) {
- w2(6); a = r1();
- w2(4); b = r1();
- buf[k] = j44(a,b);
- }
- w0(2); P1; w0(8); P2;
- break;
-
- case 1: w0(1); P1; w0(1); P2; w0(2); P1; w0(0x19); P2; w0(0); P1;
- udelay(10);
- for (k=0;k<count/2;k++) {
- w2(0x26); buf[2*k] = r0();
- w2(0x24); buf[2*k+1] = r0();
- }
- w0(2); P1; w0(9); P2;
- break;
-
- case 2: w3(1); w3(1); w2(5); w4(1); w2(4);
- w3(0); w3(0); w2(0x24);
- udelay(10);
- for (k=0;k<count;k++) buf[k] = r4();
- w2(4);
- break;
-
- case 3: w3(1); w3(1); w2(5); w4(1); w2(4);
- w3(0); w3(0); w2(0x24);
- udelay(10);
- for (k=0;k<count/2;k++) ((u16 *)buf)[k] = r4w();
- w2(4);
- break;
-
- case 4: w3(1); w3(1); w2(5); w4(1); w2(4);
- w3(0); w3(0); w2(0x24);
- udelay(10);
- for (k=0;k<count/4;k++) ((u32 *)buf)[k] = r4l();
- w2(4);
- break;
-
- }
-}
-
-static void on26_write_block( PIA *pi, char * buf, int count )
-
-{ int k;
-
- switch (pi->mode) {
-
- case 0:
- case 1: w0(1); P1; w0(1); P2;
- w0(2); P1; w0(0x18+pi->mode); P2; w0(0); P1;
- udelay(10);
- for (k=0;k<count/2;k++) {
- w2(5); w0(buf[2*k]);
- w2(7); w0(buf[2*k+1]);
- }
- w2(5); w2(4);
- w0(2); P1; w0(8+pi->mode); P2;
- break;
-
- case 2: w3(1); w3(1); w2(5); w4(1); w2(4);
- w3(0); w3(0); w2(0xc5);
- udelay(10);
- for (k=0;k<count;k++) w4(buf[k]);
- w2(0xc4);
- break;
-
- case 3: w3(1); w3(1); w2(5); w4(1); w2(4);
- w3(0); w3(0); w2(0xc5);
- udelay(10);
- for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]);
- w2(0xc4);
- break;
-
- case 4: w3(1); w3(1); w2(5); w4(1); w2(4);
- w3(0); w3(0); w2(0xc5);
- udelay(10);
- for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]);
- w2(0xc4);
- break;
-
- }
-
-}
-
-static void on26_log_adapter( PIA *pi, char * scratch, int verbose )
-
-{ char *mode_string[5] = {"4-bit","8-bit","EPP-8",
- "EPP-16","EPP-32"};
-
- printk("%s: on26 %s, OnSpec 90c26 at 0x%x, ",
- pi->device,ON26_VERSION,pi->port);
- printk("mode %d (%s), delay %d\n",pi->mode,
- mode_string[pi->mode],pi->delay);
-
-}
-
-static struct pi_protocol on26 = {
- .owner = THIS_MODULE,
- .name = "on26",
- .max_mode = 5,
- .epp_first = 2,
- .default_delay = 1,
- .max_units = 1,
- .write_regr = on26_write_regr,
- .read_regr = on26_read_regr,
- .write_block = on26_write_block,
- .read_block = on26_read_block,
- .connect = on26_connect,
- .disconnect = on26_disconnect,
- .test_port = on26_test_port,
- .log_adapter = on26_log_adapter,
-};
-
-static int __init on26_init(void)
-{
- return paride_register(&on26);
-}
-
-static void __exit on26_exit(void)
-{
- paride_unregister(&on26);
-}
-
-MODULE_LICENSE("GPL");
-module_init(on26_init)
-module_exit(on26_exit)
diff --git a/drivers/block/paride/paride.c b/drivers/block/paride/paride.c
deleted file mode 100644
index 0e287993b778..000000000000
--- a/drivers/block/paride/paride.c
+++ /dev/null
@@ -1,479 +0,0 @@
-/*
- paride.c (c) 1997-8 Grant R. Guenther <grant@xxxxxxxxxx>
- Under the terms of the GNU General Public License.
-
- This is the base module for the family of device drivers
- that support parallel port IDE devices.
-
-*/
-
-/* Changes:
-
- 1.01 GRG 1998.05.03 Use spinlocks
- 1.02 GRG 1998.05.05 init_proto, release_proto, ktti
- 1.03 GRG 1998.08.15 eliminate compiler warning
- 1.04 GRG 1998.11.28 added support for FRIQ
- 1.05 TMW 2000.06.06 use parport_find_number instead of
- parport_enumerate
- 1.06 TMW 2001.03.26 more sane parport-or-not resource management
-*/
-
-#define PI_VERSION "1.06"
-
-#include <linux/module.h>
-#include <linux/kmod.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/string.h>
-#include <linux/spinlock.h>
-#include <linux/wait.h>
-#include <linux/sched.h> /* TASK_* */
-#include <linux/parport.h>
-#include <linux/slab.h>
-
-#include "paride.h"
-
-MODULE_LICENSE("GPL");
-
-#define MAX_PROTOS 32
-
-static struct pi_protocol *protocols[MAX_PROTOS];
-
-static DEFINE_SPINLOCK(pi_spinlock);
-
-void pi_write_regr(PIA * pi, int cont, int regr, int val)
-{
- pi->proto->write_regr(pi, cont, regr, val);
-}
-
-EXPORT_SYMBOL(pi_write_regr);
-
-int pi_read_regr(PIA * pi, int cont, int regr)
-{
- return pi->proto->read_regr(pi, cont, regr);
-}
-
-EXPORT_SYMBOL(pi_read_regr);
-
-void pi_write_block(PIA * pi, char *buf, int count)
-{
- pi->proto->write_block(pi, buf, count);
-}
-
-EXPORT_SYMBOL(pi_write_block);
-
-void pi_read_block(PIA * pi, char *buf, int count)
-{
- pi->proto->read_block(pi, buf, count);
-}
-
-EXPORT_SYMBOL(pi_read_block);
-
-static void pi_wake_up(void *p)
-{
- PIA *pi = (PIA *) p;
- unsigned long flags;
- void (*cont) (void) = NULL;
-
- spin_lock_irqsave(&pi_spinlock, flags);
-
- if (pi->claim_cont && !parport_claim(pi->pardev)) {
- cont = pi->claim_cont;
- pi->claim_cont = NULL;
- pi->claimed = 1;
- }
-
- spin_unlock_irqrestore(&pi_spinlock, flags);
-
- wake_up(&(pi->parq));
-
- if (cont)
- cont();
-}
-
-int pi_schedule_claimed(PIA * pi, void (*cont) (void))
-{
- unsigned long flags;
-
- spin_lock_irqsave(&pi_spinlock, flags);
- if (pi->pardev && parport_claim(pi->pardev)) {
- pi->claim_cont = cont;
- spin_unlock_irqrestore(&pi_spinlock, flags);
- return 0;
- }
- pi->claimed = 1;
- spin_unlock_irqrestore(&pi_spinlock, flags);
- return 1;
-}
-EXPORT_SYMBOL(pi_schedule_claimed);
-
-void pi_do_claimed(PIA * pi, void (*cont) (void))
-{
- if (pi_schedule_claimed(pi, cont))
- cont();
-}
-
-EXPORT_SYMBOL(pi_do_claimed);
-
-static void pi_claim(PIA * pi)
-{
- if (pi->claimed)
- return;
- pi->claimed = 1;
- if (pi->pardev)
- wait_event(pi->parq,
- !parport_claim((struct pardevice *) pi->pardev));
-}
-
-static void pi_unclaim(PIA * pi)
-{
- pi->claimed = 0;
- if (pi->pardev)
- parport_release((struct pardevice *) (pi->pardev));
-}
-
-void pi_connect(PIA * pi)
-{
- pi_claim(pi);
- pi->proto->connect(pi);
-}
-
-EXPORT_SYMBOL(pi_connect);
-
-void pi_disconnect(PIA * pi)
-{
- pi->proto->disconnect(pi);
- pi_unclaim(pi);
-}
-
-EXPORT_SYMBOL(pi_disconnect);
-
-static void pi_unregister_parport(PIA * pi)
-{
- if (pi->pardev) {
- parport_unregister_device((struct pardevice *) (pi->pardev));
- pi->pardev = NULL;
- }
-}
-
-void pi_release(PIA * pi)
-{
- pi_unregister_parport(pi);
- if (pi->proto->release_proto)
- pi->proto->release_proto(pi);
- module_put(pi->proto->owner);
-}
-
-EXPORT_SYMBOL(pi_release);
-
-static int default_test_proto(PIA * pi, char *scratch, int verbose)
-{
- int j, k;
- int e[2] = { 0, 0 };
-
- pi->proto->connect(pi);
-
- for (j = 0; j < 2; j++) {
- pi_write_regr(pi, 0, 6, 0xa0 + j * 0x10);
- for (k = 0; k < 256; k++) {
- pi_write_regr(pi, 0, 2, k ^ 0xaa);
- pi_write_regr(pi, 0, 3, k ^ 0x55);
- if (pi_read_regr(pi, 0, 2) != (k ^ 0xaa))
- e[j]++;
- }
- }
- pi->proto->disconnect(pi);
-
- if (verbose)
- printk("%s: %s: port 0x%x, mode %d, test=(%d,%d)\n",
- pi->device, pi->proto->name, pi->port,
- pi->mode, e[0], e[1]);
-
- return (e[0] && e[1]); /* not here if both > 0 */
-}
-
-static int pi_test_proto(PIA * pi, char *scratch, int verbose)
-{
- int res;
-
- pi_claim(pi);
- if (pi->proto->test_proto)
- res = pi->proto->test_proto(pi, scratch, verbose);
- else
- res = default_test_proto(pi, scratch, verbose);
- pi_unclaim(pi);
-
- return res;
-}
-
-int paride_register(PIP * pr)
-{
- int k;
-
- for (k = 0; k < MAX_PROTOS; k++)
- if (protocols[k] && !strcmp(pr->name, protocols[k]->name)) {
- printk("paride: %s protocol already registered\n",
- pr->name);
- return -1;
- }
- k = 0;
- while ((k < MAX_PROTOS) && (protocols[k]))
- k++;
- if (k == MAX_PROTOS) {
- printk("paride: protocol table full\n");
- return -1;
- }
- protocols[k] = pr;
- pr->index = k;
- printk("paride: %s registered as protocol %d\n", pr->name, k);
- return 0;
-}
-
-EXPORT_SYMBOL(paride_register);
-
-void paride_unregister(PIP * pr)
-{
- if (!pr)
- return;
- if (protocols[pr->index] != pr) {
- printk("paride: %s not registered\n", pr->name);
- return;
- }
- protocols[pr->index] = NULL;
-}
-
-EXPORT_SYMBOL(paride_unregister);
-
-static int pi_register_parport(PIA *pi, int verbose, int unit)
-{
- struct parport *port;
- struct pardev_cb par_cb;
-
- port = parport_find_base(pi->port);
- if (!port)
- return 0;
- memset(&par_cb, 0, sizeof(par_cb));
- par_cb.wakeup = pi_wake_up;
- par_cb.private = (void *)pi;
- pi->pardev = parport_register_dev_model(port, pi->device, &par_cb,
- unit);
- parport_put_port(port);
- if (!pi->pardev)
- return 0;
-
- init_waitqueue_head(&pi->parq);
-
- if (verbose)
- printk("%s: 0x%x is %s\n", pi->device, pi->port, port->name);
-
- pi->parname = (char *) port->name;
-
- return 1;
-}
-
-static int pi_probe_mode(PIA * pi, int max, char *scratch, int verbose)
-{
- int best, range;
-
- if (pi->mode != -1) {
- if (pi->mode >= max)
- return 0;
- range = 3;
- if (pi->mode >= pi->proto->epp_first)
- range = 8;
- if ((range == 8) && (pi->port % 8))
- return 0;
- pi->reserved = range;
- return (!pi_test_proto(pi, scratch, verbose));
- }
- best = -1;
- for (pi->mode = 0; pi->mode < max; pi->mode++) {
- range = 3;
- if (pi->mode >= pi->proto->epp_first)
- range = 8;
- if ((range == 8) && (pi->port % 8))
- break;
- pi->reserved = range;
- if (!pi_test_proto(pi, scratch, verbose))
- best = pi->mode;
- }
- pi->mode = best;
- return (best > -1);
-}
-
-static int pi_probe_unit(PIA * pi, int unit, char *scratch, int verbose)
-{
- int max, s, e;
-
- s = unit;
- e = s + 1;
-
- if (s == -1) {
- s = 0;
- e = pi->proto->max_units;
- }
-
- if (!pi_register_parport(pi, verbose, s))
- return 0;
-
- if (pi->proto->test_port) {
- pi_claim(pi);
- max = pi->proto->test_port(pi);
- pi_unclaim(pi);
- } else
- max = pi->proto->max_mode;
-
- if (pi->proto->probe_unit) {
- pi_claim(pi);
- for (pi->unit = s; pi->unit < e; pi->unit++)
- if (pi->proto->probe_unit(pi)) {
- pi_unclaim(pi);
- if (pi_probe_mode(pi, max, scratch, verbose))
- return 1;
- pi_unregister_parport(pi);
- return 0;
- }
- pi_unclaim(pi);
- pi_unregister_parport(pi);
- return 0;
- }
-
- if (!pi_probe_mode(pi, max, scratch, verbose)) {
- pi_unregister_parport(pi);
- return 0;
- }
- return 1;
-
-}
-
-int pi_init(PIA * pi, int autoprobe, int port, int mode,
- int unit, int protocol, int delay, char *scratch,
- int devtype, int verbose, char *device)
-{
- int p, k, s, e;
- int lpts[7] = { 0x3bc, 0x378, 0x278, 0x268, 0x27c, 0x26c, 0 };
-
- s = protocol;
- e = s + 1;
-
- if (!protocols[0])
- request_module("paride_protocol");
-
- if (autoprobe) {
- s = 0;
- e = MAX_PROTOS;
- } else if ((s < 0) || (s >= MAX_PROTOS) || (port <= 0) ||
- (!protocols[s]) || (unit < 0) ||
- (unit >= protocols[s]->max_units)) {
- printk("%s: Invalid parameters\n", device);
- return 0;
- }
-
- for (p = s; p < e; p++) {
- struct pi_protocol *proto = protocols[p];
- if (!proto)
- continue;
- /* still racy */
- if (!try_module_get(proto->owner))
- continue;
- pi->proto = proto;
- pi->private = 0;
- if (proto->init_proto && proto->init_proto(pi) < 0) {
- pi->proto = NULL;
- module_put(proto->owner);
- continue;
- }
- if (delay == -1)
- pi->delay = pi->proto->default_delay;
- else
- pi->delay = delay;
- pi->devtype = devtype;
- pi->device = device;
-
- pi->parname = NULL;
- pi->pardev = NULL;
- init_waitqueue_head(&pi->parq);
- pi->claimed = 0;
- pi->claim_cont = NULL;
-
- pi->mode = mode;
- if (port != -1) {
- pi->port = port;
- if (pi_probe_unit(pi, unit, scratch, verbose))
- break;
- pi->port = 0;
- } else {
- k = 0;
- while ((pi->port = lpts[k++]))
- if (pi_probe_unit
- (pi, unit, scratch, verbose))
- break;
- if (pi->port)
- break;
- }
- if (pi->proto->release_proto)
- pi->proto->release_proto(pi);
- module_put(proto->owner);
- }
-
- if (!pi->port) {
- if (autoprobe)
- printk("%s: Autoprobe failed\n", device);
- else
- printk("%s: Adapter not found\n", device);
- return 0;
- }
-
- if (pi->parname)
- printk("%s: Sharing %s at 0x%x\n", pi->device,
- pi->parname, pi->port);
-
- pi->proto->log_adapter(pi, scratch, verbose);
-
- return 1;
-}
-
-EXPORT_SYMBOL(pi_init);
-
-static int pi_probe(struct pardevice *par_dev)
-{
- struct device_driver *drv = par_dev->dev.driver;
- int len = strlen(drv->name);
-
- if (strncmp(par_dev->name, drv->name, len))
- return -ENODEV;
-
- return 0;
-}
-
-void *pi_register_driver(char *name)
-{
- struct parport_driver *parp_drv;
- int ret;
-
- parp_drv = kzalloc(sizeof(*parp_drv), GFP_KERNEL);
- if (!parp_drv)
- return NULL;
-
- parp_drv->name = name;
- parp_drv->probe = pi_probe;
- parp_drv->devmodel = true;
-
- ret = parport_register_driver(parp_drv);
- if (ret) {
- kfree(parp_drv);
- return NULL;
- }
- return (void *)parp_drv;
-}
-EXPORT_SYMBOL(pi_register_driver);
-
-void pi_unregister_driver(void *_drv)
-{
- struct parport_driver *drv = _drv;
-
- parport_unregister_driver(drv);
- kfree(drv);
-}
-EXPORT_SYMBOL(pi_unregister_driver);
diff --git a/drivers/block/paride/paride.h b/drivers/block/paride/paride.h
deleted file mode 100644
index ddb9e589da7f..000000000000
--- a/drivers/block/paride/paride.h
+++ /dev/null
@@ -1,172 +0,0 @@
-#ifndef __DRIVERS_PARIDE_H__
-#define __DRIVERS_PARIDE_H__
-
-/*
- paride.h (c) 1997-8 Grant R. Guenther <grant@xxxxxxxxxx>
- Under the terms of the GPL.
-
- This file defines the interface between the high-level parallel
- IDE device drivers (pd, pf, pcd, pt) and the adapter chips.
-
-*/
-
-/* Changes:
-
- 1.01 GRG 1998.05.05 init_proto, release_proto
-*/
-
-#define PARIDE_H_VERSION "1.01"
-
-/* Some adapters need to know what kind of device they are in
-
- Values for devtype:
-*/
-
-#define PI_PD 0 /* IDE disk */
-#define PI_PCD 1 /* ATAPI CDrom */
-#define PI_PF 2 /* ATAPI disk */
-#define PI_PT 3 /* ATAPI tape */
-#define PI_PG 4 /* ATAPI generic */
-
-/* The paride module contains no state, instead the drivers allocate
- a pi_adapter data structure and pass it to paride in every operation.
-
-*/
-
-struct pi_adapter {
-
- struct pi_protocol *proto; /* adapter protocol */
- int port; /* base address of parallel port */
- int mode; /* transfer mode in use */
- int delay; /* adapter delay setting */
- int devtype; /* device type: PI_PD etc. */
- char *device; /* name of driver */
- int unit; /* unit number for chained adapters */
- int saved_r0; /* saved port state */
- int saved_r2; /* saved port state */
- int reserved; /* number of ports reserved */
- unsigned long private; /* for protocol module */
-
- wait_queue_head_t parq; /* semaphore for parport sharing */
- void *pardev; /* pointer to pardevice */
- char *parname; /* parport name */
- int claimed; /* parport has already been claimed */
- void (*claim_cont)(void); /* continuation for parport wait */
-};
-
-typedef struct pi_adapter PIA;
-
-/* functions exported by paride to the high level drivers */
-
-extern int pi_init(PIA *pi,
- int autoprobe, /* 1 to autoprobe */
- int port, /* base port address */
- int mode, /* -1 for autoprobe */
- int unit, /* unit number, if supported */
- int protocol, /* protocol to use */
- int delay, /* -1 to use adapter specific default */
- char * scratch, /* address of 512 byte buffer */
- int devtype, /* device type: PI_PD, PI_PCD, etc ... */
- int verbose, /* log verbose data while probing */
- char *device /* name of the driver */
- ); /* returns 0 on failure, 1 on success */
-
-extern void pi_release(PIA *pi);
-
-/* registers are addressed as (cont,regr)
-
- cont: 0 for command register file, 1 for control register(s)
- regr: 0-7 for register number.
-
-*/
-
-extern void pi_write_regr(PIA *pi, int cont, int regr, int val);
-
-extern int pi_read_regr(PIA *pi, int cont, int regr);
-
-extern void pi_write_block(PIA *pi, char * buf, int count);
-
-extern void pi_read_block(PIA *pi, char * buf, int count);
-
-extern void pi_connect(PIA *pi);
-
-extern void pi_disconnect(PIA *pi);
-
-extern void pi_do_claimed(PIA *pi, void (*cont)(void));
-extern int pi_schedule_claimed(PIA *pi, void (*cont)(void));
-
-/* macros and functions exported to the protocol modules */
-
-#define delay_p (pi->delay?udelay(pi->delay):(void)0)
-#define out_p(offs,byte) outb(byte,pi->port+offs); delay_p;
-#define in_p(offs) (delay_p,inb(pi->port+offs))
-
-#define w0(byte) {out_p(0,byte);}
-#define r0() (in_p(0) & 0xff)
-#define w1(byte) {out_p(1,byte);}
-#define r1() (in_p(1) & 0xff)
-#define w2(byte) {out_p(2,byte);}
-#define r2() (in_p(2) & 0xff)
-#define w3(byte) {out_p(3,byte);}
-#define w4(byte) {out_p(4,byte);}
-#define r4() (in_p(4) & 0xff)
-#define w4w(data) {outw(data,pi->port+4); delay_p;}
-#define w4l(data) {outl(data,pi->port+4); delay_p;}
-#define r4w() (delay_p,inw(pi->port+4)&0xffff)
-#define r4l() (delay_p,inl(pi->port+4)&0xffffffff)
-
-static inline u16 pi_swab16( char *b, int k)
-
-{ union { u16 u; char t[2]; } r;
-
- r.t[0]=b[2*k+1]; r.t[1]=b[2*k];
- return r.u;
-}
-
-static inline u32 pi_swab32( char *b, int k)
-
-{ union { u32 u; char f[4]; } r;
-
- r.f[0]=b[4*k+1]; r.f[1]=b[4*k];
- r.f[2]=b[4*k+3]; r.f[3]=b[4*k+2];
- return r.u;
-}
-
-struct pi_protocol {
-
- char name[8]; /* name for this protocol */
- int index; /* index into protocol table */
-
- int max_mode; /* max mode number */
- int epp_first; /* modes >= this use 8 ports */
-
- int default_delay; /* delay parameter if not specified */
- int max_units; /* max chained units probed for */
-
- void (*write_regr)(PIA *,int,int,int);
- int (*read_regr)(PIA *,int,int);
- void (*write_block)(PIA *,char *,int);
- void (*read_block)(PIA *,char *,int);
-
- void (*connect)(PIA *);
- void (*disconnect)(PIA *);
-
- int (*test_port)(PIA *);
- int (*probe_unit)(PIA *);
- int (*test_proto)(PIA *,char *,int);
- void (*log_adapter)(PIA *,char *,int);
-
- int (*init_proto)(PIA *);
- void (*release_proto)(PIA *);
- struct module *owner;
-};
-
-typedef struct pi_protocol PIP;
-
-extern int paride_register( PIP * );
-extern void paride_unregister ( PIP * );
-void *pi_register_driver(char *);
-void pi_unregister_driver(void *);
-
-#endif /* __DRIVERS_PARIDE_H__ */
-/* end of paride.h */
diff --git a/drivers/block/paride/pcd.c b/drivers/block/paride/pcd.c
deleted file mode 100644
index a026211afb51..000000000000
--- a/drivers/block/paride/pcd.c
+++ /dev/null
@@ -1,1022 +0,0 @@
-/*
- pcd.c (c) 1997-8 Grant R. Guenther <grant@xxxxxxxxxx>
- Under the terms of the GNU General Public License.
-
- This is a high-level driver for parallel port ATAPI CD-ROM
- drives based on chips supported by the paride module.
-
- By default, the driver will autoprobe for a single parallel
- port ATAPI CD-ROM drive, but if their individual parameters are
- specified, the driver can handle up to 4 drives.
-
- The behaviour of the pcd driver can be altered by setting
- some parameters from the insmod command line. The following
- parameters are adjustable:
-
- drive0 These four arguments can be arrays of
- drive1 1-6 integers as follows:
- drive2
- drive3 <prt>,<pro>,<uni>,<mod>,<slv>,<dly>
-
- Where,
-
- <prt> is the base of the parallel port address for
- the corresponding drive. (required)
-
- <pro> is the protocol number for the adapter that
- supports this drive. These numbers are
- logged by 'paride' when the protocol modules
- are initialised. (0 if not given)
-
- <uni> for those adapters that support chained
- devices, this is the unit selector for the
- chain of devices on the given port. It should
- be zero for devices that don't support chaining.
- (0 if not given)
-
- <mod> this can be -1 to choose the best mode, or one
- of the mode numbers supported by the adapter.
- (-1 if not given)
-
- <slv> ATAPI CD-ROMs can be jumpered to master or slave.
- Set this to 0 to choose the master drive, 1 to
- choose the slave, -1 (the default) to choose the
- first drive found.
-
- <dly> some parallel ports require the driver to
- go more slowly. -1 sets a default value that
- should work with the chosen protocol. Otherwise,
- set this to a small integer, the larger it is
- the slower the port i/o. In some cases, setting
- this to zero will speed up the device. (default -1)
-
- major You may use this parameter to override the
- default major number (46) that this driver
- will use. Be sure to change the device
- name as well.
-
- name This parameter is a character string that
- contains the name the kernel will use for this
- device (in /proc output, for instance).
- (default "pcd")
-
- verbose This parameter controls the amount of logging
- that the driver will do. Set it to 0 for
- normal operation, 1 to see autoprobe progress
- messages, or 2 to see additional debugging
- output. (default 0)
-
- nice This parameter controls the driver's use of
- idle CPU time, at the expense of some speed.
-
- If this driver is built into the kernel, you can use the
- following kernel command line parameters, with the same values
- as the corresponding module parameters listed above:
-
- pcd.drive0
- pcd.drive1
- pcd.drive2
- pcd.drive3
- pcd.nice
-
- In addition, you can use the parameter pcd.disable to disable
- the driver entirely.
-
-*/
-
-/* Changes:
-
- 1.01 GRG 1998.01.24 Added test unit ready support
- 1.02 GRG 1998.05.06 Changes to pcd_completion, ready_wait,
- and loosen interpretation of ATAPI
- standard for clearing error status.
- Use spinlocks. Eliminate sti().
- 1.03 GRG 1998.06.16 Eliminated an Ugh
- 1.04 GRG 1998.08.15 Added extra debugging, improvements to
- pcd_completion, use HZ in loop timing
- 1.05 GRG 1998.08.16 Conformed to "Uniform CD-ROM" standard
- 1.06 GRG 1998.08.19 Added audio ioctl support
- 1.07 GRG 1998.09.24 Increased reset timeout, added jumbo support
-
-*/
-
-#define PCD_VERSION "1.07"
-#define PCD_MAJOR 46
-#define PCD_NAME "pcd"
-#define PCD_UNITS 4
-
-/* Here are things one can override from the insmod command.
- Most are autoprobed by paride unless set here. Verbose is off
- by default.
-
-*/
-
-static int verbose = 0;
-static int major = PCD_MAJOR;
-static char *name = PCD_NAME;
-static int nice = 0;
-static int disable = 0;
-
-static int drive0[6] = { 0, 0, 0, -1, -1, -1 };
-static int drive1[6] = { 0, 0, 0, -1, -1, -1 };
-static int drive2[6] = { 0, 0, 0, -1, -1, -1 };
-static int drive3[6] = { 0, 0, 0, -1, -1, -1 };
-
-static int (*drives[4])[6] = {&drive0, &drive1, &drive2, &drive3};
-static int pcd_drive_count;
-
-enum {D_PRT, D_PRO, D_UNI, D_MOD, D_SLV, D_DLY};
-
-/* end of parameters */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/cdrom.h>
-#include <linux/spinlock.h>
-#include <linux/blkdev.h>
-#include <linux/mutex.h>
-#include <linux/uaccess.h>
-
-static DEFINE_MUTEX(pcd_mutex);
-static DEFINE_SPINLOCK(pcd_lock);
-
-module_param(verbose, int, 0644);
-module_param(major, int, 0);
-module_param(name, charp, 0);
-module_param(nice, int, 0);
-module_param_array(drive0, int, NULL, 0);
-module_param_array(drive1, int, NULL, 0);
-module_param_array(drive2, int, NULL, 0);
-module_param_array(drive3, int, NULL, 0);
-
-#include "paride.h"
-#include "pseudo.h"
-
-#define PCD_RETRIES 5
-#define PCD_TMO 800 /* timeout in jiffies */
-#define PCD_DELAY 50 /* spin delay in uS */
-#define PCD_READY_TMO 20 /* in seconds */
-#define PCD_RESET_TMO 100 /* in tenths of a second */
-
-#define PCD_SPIN (1000000*PCD_TMO)/(HZ*PCD_DELAY)
-
-#define IDE_ERR 0x01
-#define IDE_DRQ 0x08
-#define IDE_READY 0x40
-#define IDE_BUSY 0x80
-
-static int pcd_open(struct cdrom_device_info *cdi, int purpose);
-static void pcd_release(struct cdrom_device_info *cdi);
-static int pcd_drive_status(struct cdrom_device_info *cdi, int slot_nr);
-static unsigned int pcd_check_events(struct cdrom_device_info *cdi,
- unsigned int clearing, int slot_nr);
-static int pcd_tray_move(struct cdrom_device_info *cdi, int position);
-static int pcd_lock_door(struct cdrom_device_info *cdi, int lock);
-static int pcd_drive_reset(struct cdrom_device_info *cdi);
-static int pcd_get_mcn(struct cdrom_device_info *cdi, struct cdrom_mcn *mcn);
-static int pcd_audio_ioctl(struct cdrom_device_info *cdi,
- unsigned int cmd, void *arg);
-static int pcd_packet(struct cdrom_device_info *cdi,
- struct packet_command *cgc);
-
-static int pcd_detect(void);
-static void pcd_probe_capabilities(void);
-static void do_pcd_read_drq(void);
-static void do_pcd_request(struct request_queue * q);
-static void do_pcd_read(void);
-
-struct pcd_unit {
- struct pi_adapter pia; /* interface to paride layer */
- struct pi_adapter *pi;
- int drive; /* master/slave */
- int last_sense; /* result of last request sense */
- int changed; /* media change seen */
- int present; /* does this unit exist ? */
- char *name; /* pcd0, pcd1, etc */
- struct cdrom_device_info info; /* uniform cdrom interface */
- struct gendisk *disk;
-};
-
-static struct pcd_unit pcd[PCD_UNITS];
-
-static char pcd_scratch[64];
-static char pcd_buffer[2048]; /* raw block buffer */
-static int pcd_bufblk = -1; /* block in buffer, in CD units,
- -1 for nothing there. See also
- pd_unit.
- */
-
-/* the variables below are used mainly in the I/O request engine, which
- processes only one request at a time.
-*/
-
-static struct pcd_unit *pcd_current; /* current request's drive */
-static struct request *pcd_req;
-static int pcd_retries; /* retries on current request */
-static int pcd_busy; /* request being processed ? */
-static int pcd_sector; /* address of next requested sector */
-static int pcd_count; /* number of blocks still to do */
-static char *pcd_buf; /* buffer for request in progress */
-static void *par_drv; /* reference of parport driver */
-
-/* kernel glue structures */
-
-static int pcd_block_open(struct block_device *bdev, fmode_t mode)
-{
- struct pcd_unit *cd = bdev->bd_disk->private_data;
- int ret;
-
- check_disk_change(bdev);
-
- mutex_lock(&pcd_mutex);
- ret = cdrom_open(&cd->info, bdev, mode);
- mutex_unlock(&pcd_mutex);
-
- return ret;
-}
-
-static void pcd_block_release(struct gendisk *disk, fmode_t mode)
-{
- struct pcd_unit *cd = disk->private_data;
- mutex_lock(&pcd_mutex);
- cdrom_release(&cd->info, mode);
- mutex_unlock(&pcd_mutex);
-}
-
-static int pcd_block_ioctl(struct block_device *bdev, fmode_t mode,
- unsigned cmd, unsigned long arg)
-{
- struct pcd_unit *cd = bdev->bd_disk->private_data;
- int ret;
-
- mutex_lock(&pcd_mutex);
- ret = cdrom_ioctl(&cd->info, bdev, mode, cmd, arg);
- mutex_unlock(&pcd_mutex);
-
- return ret;
-}
-
-static unsigned int pcd_block_check_events(struct gendisk *disk,
- unsigned int clearing)
-{
- struct pcd_unit *cd = disk->private_data;
- return cdrom_check_events(&cd->info, clearing);
-}
-
-static const struct block_device_operations pcd_bdops = {
- .owner = THIS_MODULE,
- .open = pcd_block_open,
- .release = pcd_block_release,
- .ioctl = pcd_block_ioctl,
- .check_events = pcd_block_check_events,
-};
-
-static const struct cdrom_device_ops pcd_dops = {
- .open = pcd_open,
- .release = pcd_release,
- .drive_status = pcd_drive_status,
- .check_events = pcd_check_events,
- .tray_move = pcd_tray_move,
- .lock_door = pcd_lock_door,
- .get_mcn = pcd_get_mcn,
- .reset = pcd_drive_reset,
- .audio_ioctl = pcd_audio_ioctl,
- .generic_packet = pcd_packet,
- .capability = CDC_CLOSE_TRAY | CDC_OPEN_TRAY | CDC_LOCK |
- CDC_MCN | CDC_MEDIA_CHANGED | CDC_RESET |
- CDC_PLAY_AUDIO | CDC_GENERIC_PACKET | CDC_CD_R |
- CDC_CD_RW,
-};
-
-static void pcd_init_units(void)
-{
- struct pcd_unit *cd;
- int unit;
-
- pcd_drive_count = 0;
- for (unit = 0, cd = pcd; unit < PCD_UNITS; unit++, cd++) {
- struct gendisk *disk = alloc_disk(1);
- if (!disk)
- continue;
- disk->queue = blk_init_queue(do_pcd_request, &pcd_lock);
- if (!disk->queue) {
- put_disk(disk);
- continue;
- }
- blk_queue_bounce_limit(disk->queue, BLK_BOUNCE_HIGH);
- cd->disk = disk;
- cd->pi = &cd->pia;
- cd->present = 0;
- cd->last_sense = 0;
- cd->changed = 1;
- cd->drive = (*drives[unit])[D_SLV];
- if ((*drives[unit])[D_PRT])
- pcd_drive_count++;
-
- cd->name = &cd->info.name[0];
- snprintf(cd->name, sizeof(cd->info.name), "%s%d", name, unit);
- cd->info.ops = &pcd_dops;
- cd->info.handle = cd;
- cd->info.speed = 0;
- cd->info.capacity = 1;
- cd->info.mask = 0;
- disk->major = major;
- disk->first_minor = unit;
- strcpy(disk->disk_name, cd->name); /* umm... */
- disk->fops = &pcd_bdops;
- disk->flags = GENHD_FL_BLOCK_EVENTS_ON_EXCL_WRITE;
- }
-}
-
-static int pcd_open(struct cdrom_device_info *cdi, int purpose)
-{
- struct pcd_unit *cd = cdi->handle;
- if (!cd->present)
- return -ENODEV;
- return 0;
-}
-
-static void pcd_release(struct cdrom_device_info *cdi)
-{
-}
-
-static inline int status_reg(struct pcd_unit *cd)
-{
- return pi_read_regr(cd->pi, 1, 6);
-}
-
-static inline int read_reg(struct pcd_unit *cd, int reg)
-{
- return pi_read_regr(cd->pi, 0, reg);
-}
-
-static inline void write_reg(struct pcd_unit *cd, int reg, int val)
-{
- pi_write_regr(cd->pi, 0, reg, val);
-}
-
-static int pcd_wait(struct pcd_unit *cd, int go, int stop, char *fun, char *msg)
-{
- int j, r, e, s, p;
-
- j = 0;
- while ((((r = status_reg(cd)) & go) || (stop && (!(r & stop))))
- && (j++ < PCD_SPIN))
- udelay(PCD_DELAY);
-
- if ((r & (IDE_ERR & stop)) || (j > PCD_SPIN)) {
- s = read_reg(cd, 7);
- e = read_reg(cd, 1);
- p = read_reg(cd, 2);
- if (j > PCD_SPIN)
- e |= 0x100;
- if (fun)
- printk("%s: %s %s: alt=0x%x stat=0x%x err=0x%x"
- " loop=%d phase=%d\n",
- cd->name, fun, msg, r, s, e, j, p);
- return (s << 8) + r;
- }
- return 0;
-}
-
-static int pcd_command(struct pcd_unit *cd, char *cmd, int dlen, char *fun)
-{
- pi_connect(cd->pi);
-
- write_reg(cd, 6, 0xa0 + 0x10 * cd->drive);
-
- if (pcd_wait(cd, IDE_BUSY | IDE_DRQ, 0, fun, "before command")) {
- pi_disconnect(cd->pi);
- return -1;
- }
-
- write_reg(cd, 4, dlen % 256);
- write_reg(cd, 5, dlen / 256);
- write_reg(cd, 7, 0xa0); /* ATAPI packet command */
-
- if (pcd_wait(cd, IDE_BUSY, IDE_DRQ, fun, "command DRQ")) {
- pi_disconnect(cd->pi);
- return -1;
- }
-
- if (read_reg(cd, 2) != 1) {
- printk("%s: %s: command phase error\n", cd->name, fun);
- pi_disconnect(cd->pi);
- return -1;
- }
-
- pi_write_block(cd->pi, cmd, 12);
-
- return 0;
-}
-
-static int pcd_completion(struct pcd_unit *cd, char *buf, char *fun)
-{
- int r, d, p, n, k, j;
-
- r = -1;
- k = 0;
- j = 0;
-
- if (!pcd_wait(cd, IDE_BUSY, IDE_DRQ | IDE_READY | IDE_ERR,
- fun, "completion")) {
- r = 0;
- while (read_reg(cd, 7) & IDE_DRQ) {
- d = read_reg(cd, 4) + 256 * read_reg(cd, 5);
- n = (d + 3) & 0xfffc;
- p = read_reg(cd, 2) & 3;
-
- if ((p == 2) && (n > 0) && (j == 0)) {
- pi_read_block(cd->pi, buf, n);
- if (verbose > 1)
- printk("%s: %s: Read %d bytes\n",
- cd->name, fun, n);
- r = 0;
- j++;
- } else {
- if (verbose > 1)
- printk
- ("%s: %s: Unexpected phase %d, d=%d, k=%d\n",
- cd->name, fun, p, d, k);
- if (verbose < 2)
- printk_once(
- "%s: WARNING: ATAPI phase errors\n",
- cd->name);
- mdelay(1);
- }
- if (k++ > PCD_TMO) {
- printk("%s: Stuck DRQ\n", cd->name);
- break;
- }
- if (pcd_wait
- (cd, IDE_BUSY, IDE_DRQ | IDE_READY | IDE_ERR, fun,
- "completion")) {
- r = -1;
- break;
- }
- }
- }
-
- pi_disconnect(cd->pi);
-
- return r;
-}
-
-static void pcd_req_sense(struct pcd_unit *cd, char *fun)
-{
- char rs_cmd[12] = { 0x03, 0, 0, 0, 16, 0, 0, 0, 0, 0, 0, 0 };
- char buf[16];
- int r, c;
-
- r = pcd_command(cd, rs_cmd, 16, "Request sense");
- mdelay(1);
- if (!r)
- pcd_completion(cd, buf, "Request sense");
-
- cd->last_sense = -1;
- c = 2;
- if (!r) {
- if (fun)
- printk("%s: %s: Sense key: %x, ASC: %x, ASQ: %x\n",
- cd->name, fun, buf[2] & 0xf, buf[12], buf[13]);
- c = buf[2] & 0xf;
- cd->last_sense =
- c | ((buf[12] & 0xff) << 8) | ((buf[13] & 0xff) << 16);
- }
- if ((c == 2) || (c == 6))
- cd->changed = 1;
-}
-
-static int pcd_atapi(struct pcd_unit *cd, char *cmd, int dlen, char *buf, char *fun)
-{
- int r;
-
- r = pcd_command(cd, cmd, dlen, fun);
- mdelay(1);
- if (!r)
- r = pcd_completion(cd, buf, fun);
- if (r)
- pcd_req_sense(cd, fun);
-
- return r;
-}
-
-static int pcd_packet(struct cdrom_device_info *cdi, struct packet_command *cgc)
-{
- return pcd_atapi(cdi->handle, cgc->cmd, cgc->buflen, cgc->buffer,
- "generic packet");
-}
-
-#define DBMSG(msg) ((verbose>1)?(msg):NULL)
-
-static unsigned int pcd_check_events(struct cdrom_device_info *cdi,
- unsigned int clearing, int slot_nr)
-{
- struct pcd_unit *cd = cdi->handle;
- int res = cd->changed;
- if (res)
- cd->changed = 0;
- return res ? DISK_EVENT_MEDIA_CHANGE : 0;
-}
-
-static int pcd_lock_door(struct cdrom_device_info *cdi, int lock)
-{
- char un_cmd[12] = { 0x1e, 0, 0, 0, lock, 0, 0, 0, 0, 0, 0, 0 };
-
- return pcd_atapi(cdi->handle, un_cmd, 0, pcd_scratch,
- lock ? "lock door" : "unlock door");
-}
-
-static int pcd_tray_move(struct cdrom_device_info *cdi, int position)
-{
- char ej_cmd[12] = { 0x1b, 0, 0, 0, 3 - position, 0, 0, 0, 0, 0, 0, 0 };
-
- return pcd_atapi(cdi->handle, ej_cmd, 0, pcd_scratch,
- position ? "eject" : "close tray");
-}
-
-static void pcd_sleep(int cs)
-{
- schedule_timeout_interruptible(cs);
-}
-
-static int pcd_reset(struct pcd_unit *cd)
-{
- int i, k, flg;
- int expect[5] = { 1, 1, 1, 0x14, 0xeb };
-
- pi_connect(cd->pi);
- write_reg(cd, 6, 0xa0 + 0x10 * cd->drive);
- write_reg(cd, 7, 8);
-
- pcd_sleep(20 * HZ / 1000); /* delay a bit */
-
- k = 0;
- while ((k++ < PCD_RESET_TMO) && (status_reg(cd) & IDE_BUSY))
- pcd_sleep(HZ / 10);
-
- flg = 1;
- for (i = 0; i < 5; i++)
- flg &= (read_reg(cd, i + 1) == expect[i]);
-
- if (verbose) {
- printk("%s: Reset (%d) signature = ", cd->name, k);
- for (i = 0; i < 5; i++)
- printk("%3x", read_reg(cd, i + 1));
- if (!flg)
- printk(" (incorrect)");
- printk("\n");
- }
-
- pi_disconnect(cd->pi);
- return flg - 1;
-}
-
-static int pcd_drive_reset(struct cdrom_device_info *cdi)
-{
- return pcd_reset(cdi->handle);
-}
-
-static int pcd_ready_wait(struct pcd_unit *cd, int tmo)
-{
- char tr_cmd[12] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
- int k, p;
-
- k = 0;
- while (k < tmo) {
- cd->last_sense = 0;
- pcd_atapi(cd, tr_cmd, 0, NULL, DBMSG("test unit ready"));
- p = cd->last_sense;
- if (!p)
- return 0;
- if (!(((p & 0xffff) == 0x0402) || ((p & 0xff) == 6)))
- return p;
- k++;
- pcd_sleep(HZ);
- }
- return 0x000020; /* timeout */
-}
-
-static int pcd_drive_status(struct cdrom_device_info *cdi, int slot_nr)
-{
- char rc_cmd[12] = { 0x25, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
- struct pcd_unit *cd = cdi->handle;
-
- if (pcd_ready_wait(cd, PCD_READY_TMO))
- return CDS_DRIVE_NOT_READY;
- if (pcd_atapi(cd, rc_cmd, 8, pcd_scratch, DBMSG("check media")))
- return CDS_NO_DISC;
- return CDS_DISC_OK;
-}
-
-static int pcd_identify(struct pcd_unit *cd, char *id)
-{
- int k, s;
- char id_cmd[12] = { 0x12, 0, 0, 0, 36, 0, 0, 0, 0, 0, 0, 0 };
-
- pcd_bufblk = -1;
-
- s = pcd_atapi(cd, id_cmd, 36, pcd_buffer, "identify");
-
- if (s)
- return -1;
- if ((pcd_buffer[0] & 0x1f) != 5) {
- if (verbose)
- printk("%s: %s is not a CD-ROM\n",
- cd->name, cd->drive ? "Slave" : "Master");
- return -1;
- }
- memcpy(id, pcd_buffer + 16, 16);
- id[16] = 0;
- k = 16;
- while ((k >= 0) && (id[k] <= 0x20)) {
- id[k] = 0;
- k--;
- }
-
- printk("%s: %s: %s\n", cd->name, cd->drive ? "Slave" : "Master", id);
-
- return 0;
-}
-
-/*
- * returns 0, with id set if drive is detected
- * -1, if drive detection failed
- */
-static int pcd_probe(struct pcd_unit *cd, int ms, char *id)
-{
- if (ms == -1) {
- for (cd->drive = 0; cd->drive <= 1; cd->drive++)
- if (!pcd_reset(cd) && !pcd_identify(cd, id))
- return 0;
- } else {
- cd->drive = ms;
- if (!pcd_reset(cd) && !pcd_identify(cd, id))
- return 0;
- }
- return -1;
-}
-
-static void pcd_probe_capabilities(void)
-{
- int unit, r;
- char buffer[32];
- char cmd[12] = { 0x5a, 1 << 3, 0x2a, 0, 0, 0, 0, 18, 0, 0, 0, 0 };
- struct pcd_unit *cd;
-
- for (unit = 0, cd = pcd; unit < PCD_UNITS; unit++, cd++) {
- if (!cd->present)
- continue;
- r = pcd_atapi(cd, cmd, 18, buffer, "mode sense capabilities");
- if (r)
- continue;
- /* we should now have the cap page */
- if ((buffer[11] & 1) == 0)
- cd->info.mask |= CDC_CD_R;
- if ((buffer[11] & 2) == 0)
- cd->info.mask |= CDC_CD_RW;
- if ((buffer[12] & 1) == 0)
- cd->info.mask |= CDC_PLAY_AUDIO;
- if ((buffer[14] & 1) == 0)
- cd->info.mask |= CDC_LOCK;
- if ((buffer[14] & 8) == 0)
- cd->info.mask |= CDC_OPEN_TRAY;
- if ((buffer[14] >> 6) == 0)
- cd->info.mask |= CDC_CLOSE_TRAY;
- }
-}
-
-static int pcd_detect(void)
-{
- char id[18];
- int k, unit;
- struct pcd_unit *cd;
-
- printk("%s: %s version %s, major %d, nice %d\n",
- name, name, PCD_VERSION, major, nice);
-
- par_drv = pi_register_driver(name);
- if (!par_drv) {
- pr_err("failed to register %s driver\n", name);
- return -1;
- }
-
- k = 0;
- if (pcd_drive_count == 0) { /* nothing spec'd - so autoprobe for 1 */
- cd = pcd;
- if (pi_init(cd->pi, 1, -1, -1, -1, -1, -1, pcd_buffer,
- PI_PCD, verbose, cd->name)) {
- if (!pcd_probe(cd, -1, id) && cd->disk) {
- cd->present = 1;
- k++;
- } else
- pi_release(cd->pi);
- }
- } else {
- for (unit = 0, cd = pcd; unit < PCD_UNITS; unit++, cd++) {
- int *conf = *drives[unit];
- if (!conf[D_PRT])
- continue;
- if (!pi_init(cd->pi, 0, conf[D_PRT], conf[D_MOD],
- conf[D_UNI], conf[D_PRO], conf[D_DLY],
- pcd_buffer, PI_PCD, verbose, cd->name))
- continue;
- if (!pcd_probe(cd, conf[D_SLV], id) && cd->disk) {
- cd->present = 1;
- k++;
- } else
- pi_release(cd->pi);
- }
- }
- if (k)
- return 0;
-
- printk("%s: No CD-ROM drive found\n", name);
- for (unit = 0, cd = pcd; unit < PCD_UNITS; unit++, cd++)
- put_disk(cd->disk);
- pi_unregister_driver(par_drv);
- return -1;
-}
-
-/* I/O request processing */
-static int pcd_queue;
-
-static int set_next_request(void)
-{
- struct pcd_unit *cd;
- struct request_queue *q;
- int old_pos = pcd_queue;
-
- do {
- cd = &pcd[pcd_queue];
- q = cd->present ? cd->disk->queue : NULL;
- if (++pcd_queue == PCD_UNITS)
- pcd_queue = 0;
- if (q) {
- pcd_req = blk_fetch_request(q);
- if (pcd_req)
- break;
- }
- } while (pcd_queue != old_pos);
-
- return pcd_req != NULL;
-}
-
-static void pcd_request(void)
-{
- if (pcd_busy)
- return;
- while (1) {
- if (!pcd_req && !set_next_request())
- return;
-
- if (rq_data_dir(pcd_req) == READ) {
- struct pcd_unit *cd = pcd_req->rq_disk->private_data;
- if (cd != pcd_current)
- pcd_bufblk = -1;
- pcd_current = cd;
- pcd_sector = blk_rq_pos(pcd_req);
- pcd_count = blk_rq_cur_sectors(pcd_req);
- pcd_buf = bio_data(pcd_req->bio);
- pcd_busy = 1;
- ps_set_intr(do_pcd_read, NULL, 0, nice);
- return;
- } else {
- __blk_end_request_all(pcd_req, BLK_STS_IOERR);
- pcd_req = NULL;
- }
- }
-}
-
-static void do_pcd_request(struct request_queue *q)
-{
- pcd_request();
-}
-
-static inline void next_request(blk_status_t err)
-{
- unsigned long saved_flags;
-
- spin_lock_irqsave(&pcd_lock, saved_flags);
- if (!__blk_end_request_cur(pcd_req, err))
- pcd_req = NULL;
- pcd_busy = 0;
- pcd_request();
- spin_unlock_irqrestore(&pcd_lock, saved_flags);
-}
-
-static int pcd_ready(void)
-{
- return (((status_reg(pcd_current) & (IDE_BUSY | IDE_DRQ)) == IDE_DRQ));
-}
-
-static void pcd_transfer(void)
-{
-
- while (pcd_count && (pcd_sector / 4 == pcd_bufblk)) {
- int o = (pcd_sector % 4) * 512;
- memcpy(pcd_buf, pcd_buffer + o, 512);
- pcd_count--;
- pcd_buf += 512;
- pcd_sector++;
- }
-}
-
-static void pcd_start(void)
-{
- int b, i;
- char rd_cmd[12] = { 0xa8, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 };
-
- pcd_bufblk = pcd_sector / 4;
- b = pcd_bufblk;
- for (i = 0; i < 4; i++) {
- rd_cmd[5 - i] = b & 0xff;
- b = b >> 8;
- }
-
- if (pcd_command(pcd_current, rd_cmd, 2048, "read block")) {
- pcd_bufblk = -1;
- next_request(BLK_STS_IOERR);
- return;
- }
-
- mdelay(1);
-
- ps_set_intr(do_pcd_read_drq, pcd_ready, PCD_TMO, nice);
-}
-
-static void do_pcd_read(void)
-{
- pcd_busy = 1;
- pcd_retries = 0;
- pcd_transfer();
- if (!pcd_count) {
- next_request(0);
- return;
- }
-
- pi_do_claimed(pcd_current->pi, pcd_start);
-}
-
-static void do_pcd_read_drq(void)
-{
- unsigned long saved_flags;
-
- if (pcd_completion(pcd_current, pcd_buffer, "read block")) {
- if (pcd_retries < PCD_RETRIES) {
- mdelay(1);
- pcd_retries++;
- pi_do_claimed(pcd_current->pi, pcd_start);
- return;
- }
- pcd_bufblk = -1;
- next_request(BLK_STS_IOERR);
- return;
- }
-
- do_pcd_read();
- spin_lock_irqsave(&pcd_lock, saved_flags);
- pcd_request();
- spin_unlock_irqrestore(&pcd_lock, saved_flags);
-}
-
-/* the audio_ioctl stuff is adapted from sr_ioctl.c */
-
-static int pcd_audio_ioctl(struct cdrom_device_info *cdi, unsigned int cmd, void *arg)
-{
- struct pcd_unit *cd = cdi->handle;
-
- switch (cmd) {
-
- case CDROMREADTOCHDR:
-
- {
- char cmd[12] =
- { GPCMD_READ_TOC_PMA_ATIP, 0, 0, 0, 0, 0, 0, 0, 12,
- 0, 0, 0 };
- struct cdrom_tochdr *tochdr =
- (struct cdrom_tochdr *) arg;
- char buffer[32];
- int r;
-
- r = pcd_atapi(cd, cmd, 12, buffer, "read toc header");
-
- tochdr->cdth_trk0 = buffer[2];
- tochdr->cdth_trk1 = buffer[3];
-
- return r ? -EIO : 0;
- }
-
- case CDROMREADTOCENTRY:
-
- {
- char cmd[12] =
- { GPCMD_READ_TOC_PMA_ATIP, 0, 0, 0, 0, 0, 0, 0, 12,
- 0, 0, 0 };
-
- struct cdrom_tocentry *tocentry =
- (struct cdrom_tocentry *) arg;
- unsigned char buffer[32];
- int r;
-
- cmd[1] =
- (tocentry->cdte_format == CDROM_MSF ? 0x02 : 0);
- cmd[6] = tocentry->cdte_track;
-
- r = pcd_atapi(cd, cmd, 12, buffer, "read toc entry");
-
- tocentry->cdte_ctrl = buffer[5] & 0xf;
- tocentry->cdte_adr = buffer[5] >> 4;
- tocentry->cdte_datamode =
- (tocentry->cdte_ctrl & 0x04) ? 1 : 0;
- if (tocentry->cdte_format == CDROM_MSF) {
- tocentry->cdte_addr.msf.minute = buffer[9];
- tocentry->cdte_addr.msf.second = buffer[10];
- tocentry->cdte_addr.msf.frame = buffer[11];
- } else
- tocentry->cdte_addr.lba =
- (((((buffer[8] << 8) + buffer[9]) << 8)
- + buffer[10]) << 8) + buffer[11];
-
- return r ? -EIO : 0;
- }
-
- default:
-
- return -ENOSYS;
- }
-}
-
-static int pcd_get_mcn(struct cdrom_device_info *cdi, struct cdrom_mcn *mcn)
-{
- char cmd[12] =
- { GPCMD_READ_SUBCHANNEL, 0, 0x40, 2, 0, 0, 0, 0, 24, 0, 0, 0 };
- char buffer[32];
-
- if (pcd_atapi(cdi->handle, cmd, 24, buffer, "get mcn"))
- return -EIO;
-
- memcpy(mcn->medium_catalog_number, buffer + 9, 13);
- mcn->medium_catalog_number[13] = 0;
-
- return 0;
-}
-
-static int __init pcd_init(void)
-{
- struct pcd_unit *cd;
- int unit;
-
- if (disable)
- return -EINVAL;
-
- pcd_init_units();
-
- if (pcd_detect())
- return -ENODEV;
-
- /* get the atapi capabilities page */
- pcd_probe_capabilities();
-
- if (register_blkdev(major, name)) {
- for (unit = 0, cd = pcd; unit < PCD_UNITS; unit++, cd++)
- put_disk(cd->disk);
- return -EBUSY;
- }
-
- for (unit = 0, cd = pcd; unit < PCD_UNITS; unit++, cd++) {
- if (cd->present) {
- register_cdrom(&cd->info);
- cd->disk->private_data = cd;
- add_disk(cd->disk);
- }
- }
-
- return 0;
-}
-
-static void __exit pcd_exit(void)
-{
- struct pcd_unit *cd;
- int unit;
-
- for (unit = 0, cd = pcd; unit < PCD_UNITS; unit++, cd++) {
- if (cd->present) {
- del_gendisk(cd->disk);
- pi_release(cd->pi);
- unregister_cdrom(&cd->info);
- }
- blk_cleanup_queue(cd->disk->queue);
- put_disk(cd->disk);
- }
- unregister_blkdev(major, name);
- pi_unregister_driver(par_drv);
-}
-
-MODULE_LICENSE("GPL");
-module_init(pcd_init)
-module_exit(pcd_exit)
diff --git a/drivers/block/paride/pd.c b/drivers/block/paride/pd.c
deleted file mode 100644
index 27a44b97393a..000000000000
--- a/drivers/block/paride/pd.c
+++ /dev/null
@@ -1,981 +0,0 @@
-/*
- pd.c (c) 1997-8 Grant R. Guenther <grant@xxxxxxxxxx>
- Under the terms of the GNU General Public License.
-
- This is the high-level driver for parallel port IDE hard
- drives based on chips supported by the paride module.
-
- By default, the driver will autoprobe for a single parallel
- port IDE drive, but if their individual parameters are
- specified, the driver can handle up to 4 drives.
-
- The behaviour of the pd driver can be altered by setting
- some parameters from the insmod command line. The following
- parameters are adjustable:
-
- drive0 These four arguments can be arrays of
- drive1 1-8 integers as follows:
- drive2
- drive3 <prt>,<pro>,<uni>,<mod>,<geo>,<sby>,<dly>,<slv>
-
- Where,
-
- <prt> is the base of the parallel port address for
- the corresponding drive. (required)
-
- <pro> is the protocol number for the adapter that
- supports this drive. These numbers are
- logged by 'paride' when the protocol modules
- are initialised. (0 if not given)
-
- <uni> for those adapters that support chained
- devices, this is the unit selector for the
- chain of devices on the given port. It should
- be zero for devices that don't support chaining.
- (0 if not given)
-
- <mod> this can be -1 to choose the best mode, or one
- of the mode numbers supported by the adapter.
- (-1 if not given)
-
- <geo> this defaults to 0 to indicate that the driver
- should use the CHS geometry provided by the drive
- itself. If set to 1, the driver will provide
- a logical geometry with 64 heads and 32 sectors
- per track, to be consistent with most SCSI
- drivers. (0 if not given)
-
- <sby> set this to zero to disable the power saving
- standby mode, if needed. (1 if not given)
-
- <dly> some parallel ports require the driver to
- go more slowly. -1 sets a default value that
- should work with the chosen protocol. Otherwise,
- set this to a small integer, the larger it is
- the slower the port i/o. In some cases, setting
- this to zero will speed up the device. (default -1)
-
- <slv> IDE disks can be jumpered to master or slave.
- Set this to 0 to choose the master drive, 1 to
- choose the slave, -1 (the default) to choose the
- first drive found.
-
-
- major You may use this parameter to override the
- default major number (45) that this driver
- will use. Be sure to change the device
- name as well.
-
- name This parameter is a character string that
- contains the name the kernel will use for this
- device (in /proc output, for instance).
- (default "pd")
-
- cluster The driver will attempt to aggregate requests
- for adjacent blocks into larger multi-block
- clusters. The maximum cluster size (in 512
- byte sectors) is set with this parameter.
- (default 64)
-
- verbose This parameter controls the amount of logging
- that the driver will do. Set it to 0 for
- normal operation, 1 to see autoprobe progress
- messages, or 2 to see additional debugging
- output. (default 0)
-
- nice This parameter controls the driver's use of
- idle CPU time, at the expense of some speed.
-
- If this driver is built into the kernel, you can use kernel
- the following command line parameters, with the same values
- as the corresponding module parameters listed above:
-
- pd.drive0
- pd.drive1
- pd.drive2
- pd.drive3
- pd.cluster
- pd.nice
-
- In addition, you can use the parameter pd.disable to disable
- the driver entirely.
-
-*/
-
-/* Changes:
-
- 1.01 GRG 1997.01.24 Restored pd_reset()
- Added eject ioctl
- 1.02 GRG 1998.05.06 SMP spinlock changes,
- Added slave support
- 1.03 GRG 1998.06.16 Eliminate an Ugh.
- 1.04 GRG 1998.08.15 Extra debugging, use HZ in loop timing
- 1.05 GRG 1998.09.24 Added jumbo support
-
-*/
-
-#define PD_VERSION "1.05"
-#define PD_MAJOR 45
-#define PD_NAME "pd"
-#define PD_UNITS 4
-
-/* Here are things one can override from the insmod command.
- Most are autoprobed by paride unless set here. Verbose is off
- by default.
-
-*/
-#include <linux/types.h>
-
-static int verbose = 0;
-static int major = PD_MAJOR;
-static char *name = PD_NAME;
-static int cluster = 64;
-static int nice = 0;
-static int disable = 0;
-
-static int drive0[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
-static int drive1[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
-static int drive2[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
-static int drive3[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
-
-static int (*drives[4])[8] = {&drive0, &drive1, &drive2, &drive3};
-
-enum {D_PRT, D_PRO, D_UNI, D_MOD, D_GEO, D_SBY, D_DLY, D_SLV};
-
-/* end of parameters */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/gfp.h>
-#include <linux/fs.h>
-#include <linux/delay.h>
-#include <linux/hdreg.h>
-#include <linux/cdrom.h> /* for the eject ioctl */
-#include <linux/blkdev.h>
-#include <linux/blkpg.h>
-#include <linux/kernel.h>
-#include <linux/mutex.h>
-#include <linux/uaccess.h>
-#include <linux/workqueue.h>
-
-static DEFINE_MUTEX(pd_mutex);
-static DEFINE_SPINLOCK(pd_lock);
-
-module_param(verbose, int, 0);
-module_param(major, int, 0);
-module_param(name, charp, 0);
-module_param(cluster, int, 0);
-module_param(nice, int, 0);
-module_param_array(drive0, int, NULL, 0);
-module_param_array(drive1, int, NULL, 0);
-module_param_array(drive2, int, NULL, 0);
-module_param_array(drive3, int, NULL, 0);
-
-#include "paride.h"
-
-#define PD_BITS 4
-
-/* numbers for "SCSI" geometry */
-
-#define PD_LOG_HEADS 64
-#define PD_LOG_SECTS 32
-
-#define PD_ID_OFF 54
-#define PD_ID_LEN 14
-
-#define PD_MAX_RETRIES 5
-#define PD_TMO 800 /* interrupt timeout in jiffies */
-#define PD_SPIN_DEL 50 /* spin delay in micro-seconds */
-
-#define PD_SPIN (1000000*PD_TMO)/(HZ*PD_SPIN_DEL)
-
-#define STAT_ERR 0x00001
-#define STAT_INDEX 0x00002
-#define STAT_ECC 0x00004
-#define STAT_DRQ 0x00008
-#define STAT_SEEK 0x00010
-#define STAT_WRERR 0x00020
-#define STAT_READY 0x00040
-#define STAT_BUSY 0x00080
-
-#define ERR_AMNF 0x00100
-#define ERR_TK0NF 0x00200
-#define ERR_ABRT 0x00400
-#define ERR_MCR 0x00800
-#define ERR_IDNF 0x01000
-#define ERR_MC 0x02000
-#define ERR_UNC 0x04000
-#define ERR_TMO 0x10000
-
-#define IDE_READ 0x20
-#define IDE_WRITE 0x30
-#define IDE_READ_VRFY 0x40
-#define IDE_INIT_DEV_PARMS 0x91
-#define IDE_STANDBY 0x96
-#define IDE_ACKCHANGE 0xdb
-#define IDE_DOORLOCK 0xde
-#define IDE_DOORUNLOCK 0xdf
-#define IDE_IDENTIFY 0xec
-#define IDE_EJECT 0xed
-
-#define PD_NAMELEN 8
-
-struct pd_unit {
- struct pi_adapter pia; /* interface to paride layer */
- struct pi_adapter *pi;
- int access; /* count of active opens ... */
- int capacity; /* Size of this volume in sectors */
- int heads; /* physical geometry */
- int sectors;
- int cylinders;
- int can_lba;
- int drive; /* master=0 slave=1 */
- int changed; /* Have we seen a disk change ? */
- int removable; /* removable media device ? */
- int standby;
- int alt_geom;
- char name[PD_NAMELEN]; /* pda, pdb, etc ... */
- struct gendisk *gd;
-};
-
-static struct pd_unit pd[PD_UNITS];
-
-static char pd_scratch[512]; /* scratch block buffer */
-
-static char *pd_errs[17] = { "ERR", "INDEX", "ECC", "DRQ", "SEEK", "WRERR",
- "READY", "BUSY", "AMNF", "TK0NF", "ABRT", "MCR",
- "IDNF", "MC", "UNC", "???", "TMO"
-};
-
-static void *par_drv; /* reference of parport driver */
-
-static inline int status_reg(struct pd_unit *disk)
-{
- return pi_read_regr(disk->pi, 1, 6);
-}
-
-static inline int read_reg(struct pd_unit *disk, int reg)
-{
- return pi_read_regr(disk->pi, 0, reg);
-}
-
-static inline void write_status(struct pd_unit *disk, int val)
-{
- pi_write_regr(disk->pi, 1, 6, val);
-}
-
-static inline void write_reg(struct pd_unit *disk, int reg, int val)
-{
- pi_write_regr(disk->pi, 0, reg, val);
-}
-
-static inline u8 DRIVE(struct pd_unit *disk)
-{
- return 0xa0+0x10*disk->drive;
-}
-
-/* ide command interface */
-
-static void pd_print_error(struct pd_unit *disk, char *msg, int status)
-{
- int i;
-
- printk("%s: %s: status = 0x%x =", disk->name, msg, status);
- for (i = 0; i < ARRAY_SIZE(pd_errs); i++)
- if (status & (1 << i))
- printk(" %s", pd_errs[i]);
- printk("\n");
-}
-
-static void pd_reset(struct pd_unit *disk)
-{ /* called only for MASTER drive */
- write_status(disk, 4);
- udelay(50);
- write_status(disk, 0);
- udelay(250);
-}
-
-#define DBMSG(msg) ((verbose>1)?(msg):NULL)
-
-static int pd_wait_for(struct pd_unit *disk, int w, char *msg)
-{ /* polled wait */
- int k, r, e;
-
- k = 0;
- while (k < PD_SPIN) {
- r = status_reg(disk);
- k++;
- if (((r & w) == w) && !(r & STAT_BUSY))
- break;
- udelay(PD_SPIN_DEL);
- }
- e = (read_reg(disk, 1) << 8) + read_reg(disk, 7);
- if (k >= PD_SPIN)
- e |= ERR_TMO;
- if ((e & (STAT_ERR | ERR_TMO)) && (msg != NULL))
- pd_print_error(disk, msg, e);
- return e;
-}
-
-static void pd_send_command(struct pd_unit *disk, int n, int s, int h, int c0, int c1, int func)
-{
- write_reg(disk, 6, DRIVE(disk) + h);
- write_reg(disk, 1, 0); /* the IDE task file */
- write_reg(disk, 2, n);
- write_reg(disk, 3, s);
- write_reg(disk, 4, c0);
- write_reg(disk, 5, c1);
- write_reg(disk, 7, func);
-
- udelay(1);
-}
-
-static void pd_ide_command(struct pd_unit *disk, int func, int block, int count)
-{
- int c1, c0, h, s;
-
- if (disk->can_lba) {
- s = block & 255;
- c0 = (block >>= 8) & 255;
- c1 = (block >>= 8) & 255;
- h = ((block >>= 8) & 15) + 0x40;
- } else {
- s = (block % disk->sectors) + 1;
- h = (block /= disk->sectors) % disk->heads;
- c0 = (block /= disk->heads) % 256;
- c1 = (block >>= 8);
- }
- pd_send_command(disk, count, s, h, c0, c1, func);
-}
-
-/* The i/o request engine */
-
-enum action {Fail = 0, Ok = 1, Hold, Wait};
-
-static struct request *pd_req; /* current request */
-static enum action (*phase)(void);
-
-static void run_fsm(void);
-
-static void ps_tq_int(struct work_struct *work);
-
-static DECLARE_DELAYED_WORK(fsm_tq, ps_tq_int);
-
-static void schedule_fsm(void)
-{
- if (!nice)
- schedule_delayed_work(&fsm_tq, 0);
- else
- schedule_delayed_work(&fsm_tq, nice-1);
-}
-
-static void ps_tq_int(struct work_struct *work)
-{
- run_fsm();
-}
-
-static enum action do_pd_io_start(void);
-static enum action pd_special(void);
-static enum action do_pd_read_start(void);
-static enum action do_pd_write_start(void);
-static enum action do_pd_read_drq(void);
-static enum action do_pd_write_done(void);
-
-static int pd_queue;
-static int pd_claimed;
-
-static struct pd_unit *pd_current; /* current request's drive */
-static PIA *pi_current; /* current request's PIA */
-
-static int set_next_request(void)
-{
- struct gendisk *disk;
- struct request_queue *q;
- int old_pos = pd_queue;
-
- do {
- disk = pd[pd_queue].gd;
- q = disk ? disk->queue : NULL;
- if (++pd_queue == PD_UNITS)
- pd_queue = 0;
- if (q) {
- pd_req = blk_fetch_request(q);
- if (pd_req)
- break;
- }
- } while (pd_queue != old_pos);
-
- return pd_req != NULL;
-}
-
-static void run_fsm(void)
-{
- while (1) {
- enum action res;
- unsigned long saved_flags;
- int stop = 0;
-
- if (!phase) {
- pd_current = pd_req->rq_disk->private_data;
- pi_current = pd_current->pi;
- phase = do_pd_io_start;
- }
-
- switch (pd_claimed) {
- case 0:
- pd_claimed = 1;
- if (!pi_schedule_claimed(pi_current, run_fsm))
- return;
- case 1:
- pd_claimed = 2;
- pi_current->proto->connect(pi_current);
- }
-
- switch(res = phase()) {
- case Ok: case Fail:
- pi_disconnect(pi_current);
- pd_claimed = 0;
- phase = NULL;
- spin_lock_irqsave(&pd_lock, saved_flags);
- if (!__blk_end_request_cur(pd_req,
- res == Ok ? 0 : BLK_STS_IOERR)) {
- if (!set_next_request())
- stop = 1;
- }
- spin_unlock_irqrestore(&pd_lock, saved_flags);
- if (stop)
- return;
- case Hold:
- schedule_fsm();
- return;
- case Wait:
- pi_disconnect(pi_current);
- pd_claimed = 0;
- }
- }
-}
-
-static int pd_retries = 0; /* i/o error retry count */
-static int pd_block; /* address of next requested block */
-static int pd_count; /* number of blocks still to do */
-static int pd_run; /* sectors in current cluster */
-static char *pd_buf; /* buffer for request in progress */
-
-static enum action do_pd_io_start(void)
-{
- switch (req_op(pd_req)) {
- case REQ_OP_DRV_IN:
- phase = pd_special;
- return pd_special();
- case REQ_OP_READ:
- case REQ_OP_WRITE:
- pd_block = blk_rq_pos(pd_req);
- pd_count = blk_rq_cur_sectors(pd_req);
- if (pd_block + pd_count > get_capacity(pd_req->rq_disk))
- return Fail;
- pd_run = blk_rq_sectors(pd_req);
- pd_buf = bio_data(pd_req->bio);
- pd_retries = 0;
- if (req_op(pd_req) == REQ_OP_READ)
- return do_pd_read_start();
- else
- return do_pd_write_start();
- }
- return Fail;
-}
-
-static enum action pd_special(void)
-{
- enum action (*func)(struct pd_unit *) = pd_req->special;
- return func(pd_current);
-}
-
-static int pd_next_buf(void)
-{
- unsigned long saved_flags;
-
- pd_count--;
- pd_run--;
- pd_buf += 512;
- pd_block++;
- if (!pd_run)
- return 1;
- if (pd_count)
- return 0;
- spin_lock_irqsave(&pd_lock, saved_flags);
- __blk_end_request_cur(pd_req, 0);
- pd_count = blk_rq_cur_sectors(pd_req);
- pd_buf = bio_data(pd_req->bio);
- spin_unlock_irqrestore(&pd_lock, saved_flags);
- return 0;
-}
-
-static unsigned long pd_timeout;
-
-static enum action do_pd_read_start(void)
-{
- if (pd_wait_for(pd_current, STAT_READY, "do_pd_read") & STAT_ERR) {
- if (pd_retries < PD_MAX_RETRIES) {
- pd_retries++;
- return Wait;
- }
- return Fail;
- }
- pd_ide_command(pd_current, IDE_READ, pd_block, pd_run);
- phase = do_pd_read_drq;
- pd_timeout = jiffies + PD_TMO;
- return Hold;
-}
-
-static enum action do_pd_write_start(void)
-{
- if (pd_wait_for(pd_current, STAT_READY, "do_pd_write") & STAT_ERR) {
- if (pd_retries < PD_MAX_RETRIES) {
- pd_retries++;
- return Wait;
- }
- return Fail;
- }
- pd_ide_command(pd_current, IDE_WRITE, pd_block, pd_run);
- while (1) {
- if (pd_wait_for(pd_current, STAT_DRQ, "do_pd_write_drq") & STAT_ERR) {
- if (pd_retries < PD_MAX_RETRIES) {
- pd_retries++;
- return Wait;
- }
- return Fail;
- }
- pi_write_block(pd_current->pi, pd_buf, 512);
- if (pd_next_buf())
- break;
- }
- phase = do_pd_write_done;
- pd_timeout = jiffies + PD_TMO;
- return Hold;
-}
-
-static inline int pd_ready(void)
-{
- return !(status_reg(pd_current) & STAT_BUSY);
-}
-
-static enum action do_pd_read_drq(void)
-{
- if (!pd_ready() && !time_after_eq(jiffies, pd_timeout))
- return Hold;
-
- while (1) {
- if (pd_wait_for(pd_current, STAT_DRQ, "do_pd_read_drq") & STAT_ERR) {
- if (pd_retries < PD_MAX_RETRIES) {
- pd_retries++;
- phase = do_pd_read_start;
- return Wait;
- }
- return Fail;
- }
- pi_read_block(pd_current->pi, pd_buf, 512);
- if (pd_next_buf())
- break;
- }
- return Ok;
-}
-
-static enum action do_pd_write_done(void)
-{
- if (!pd_ready() && !time_after_eq(jiffies, pd_timeout))
- return Hold;
-
- if (pd_wait_for(pd_current, STAT_READY, "do_pd_write_done") & STAT_ERR) {
- if (pd_retries < PD_MAX_RETRIES) {
- pd_retries++;
- phase = do_pd_write_start;
- return Wait;
- }
- return Fail;
- }
- return Ok;
-}
-
-/* special io requests */
-
-/* According to the ATA standard, the default CHS geometry should be
- available following a reset. Some Western Digital drives come up
- in a mode where only LBA addresses are accepted until the device
- parameters are initialised.
-*/
-
-static void pd_init_dev_parms(struct pd_unit *disk)
-{
- pd_wait_for(disk, 0, DBMSG("before init_dev_parms"));
- pd_send_command(disk, disk->sectors, 0, disk->heads - 1, 0, 0,
- IDE_INIT_DEV_PARMS);
- udelay(300);
- pd_wait_for(disk, 0, "Initialise device parameters");
-}
-
-static enum action pd_door_lock(struct pd_unit *disk)
-{
- if (!(pd_wait_for(disk, STAT_READY, "Lock") & STAT_ERR)) {
- pd_send_command(disk, 1, 0, 0, 0, 0, IDE_DOORLOCK);
- pd_wait_for(disk, STAT_READY, "Lock done");
- }
- return Ok;
-}
-
-static enum action pd_door_unlock(struct pd_unit *disk)
-{
- if (!(pd_wait_for(disk, STAT_READY, "Lock") & STAT_ERR)) {
- pd_send_command(disk, 1, 0, 0, 0, 0, IDE_DOORUNLOCK);
- pd_wait_for(disk, STAT_READY, "Lock done");
- }
- return Ok;
-}
-
-static enum action pd_eject(struct pd_unit *disk)
-{
- pd_wait_for(disk, 0, DBMSG("before unlock on eject"));
- pd_send_command(disk, 1, 0, 0, 0, 0, IDE_DOORUNLOCK);
- pd_wait_for(disk, 0, DBMSG("after unlock on eject"));
- pd_wait_for(disk, 0, DBMSG("before eject"));
- pd_send_command(disk, 0, 0, 0, 0, 0, IDE_EJECT);
- pd_wait_for(disk, 0, DBMSG("after eject"));
- return Ok;
-}
-
-static enum action pd_media_check(struct pd_unit *disk)
-{
- int r = pd_wait_for(disk, STAT_READY, DBMSG("before media_check"));
- if (!(r & STAT_ERR)) {
- pd_send_command(disk, 1, 1, 0, 0, 0, IDE_READ_VRFY);
- r = pd_wait_for(disk, STAT_READY, DBMSG("RDY after READ_VRFY"));
- } else
- disk->changed = 1; /* say changed if other error */
- if (r & ERR_MC) {
- disk->changed = 1;
- pd_send_command(disk, 1, 0, 0, 0, 0, IDE_ACKCHANGE);
- pd_wait_for(disk, STAT_READY, DBMSG("RDY after ACKCHANGE"));
- pd_send_command(disk, 1, 1, 0, 0, 0, IDE_READ_VRFY);
- r = pd_wait_for(disk, STAT_READY, DBMSG("RDY after VRFY"));
- }
- return Ok;
-}
-
-static void pd_standby_off(struct pd_unit *disk)
-{
- pd_wait_for(disk, 0, DBMSG("before STANDBY"));
- pd_send_command(disk, 0, 0, 0, 0, 0, IDE_STANDBY);
- pd_wait_for(disk, 0, DBMSG("after STANDBY"));
-}
-
-static enum action pd_identify(struct pd_unit *disk)
-{
- int j;
- char id[PD_ID_LEN + 1];
-
-/* WARNING: here there may be dragons. reset() applies to both drives,
- but we call it only on probing the MASTER. This should allow most
- common configurations to work, but be warned that a reset can clear
- settings on the SLAVE drive.
-*/
-
- if (disk->drive == 0)
- pd_reset(disk);
-
- write_reg(disk, 6, DRIVE(disk));
- pd_wait_for(disk, 0, DBMSG("before IDENT"));
- pd_send_command(disk, 1, 0, 0, 0, 0, IDE_IDENTIFY);
-
- if (pd_wait_for(disk, STAT_DRQ, DBMSG("IDENT DRQ")) & STAT_ERR)
- return Fail;
- pi_read_block(disk->pi, pd_scratch, 512);
- disk->can_lba = pd_scratch[99] & 2;
- disk->sectors = le16_to_cpu(*(__le16 *) (pd_scratch + 12));
- disk->heads = le16_to_cpu(*(__le16 *) (pd_scratch + 6));
- disk->cylinders = le16_to_cpu(*(__le16 *) (pd_scratch + 2));
- if (disk->can_lba)
- disk->capacity = le32_to_cpu(*(__le32 *) (pd_scratch + 120));
- else
- disk->capacity = disk->sectors * disk->heads * disk->cylinders;
-
- for (j = 0; j < PD_ID_LEN; j++)
- id[j ^ 1] = pd_scratch[j + PD_ID_OFF];
- j = PD_ID_LEN - 1;
- while ((j >= 0) && (id[j] <= 0x20))
- j--;
- j++;
- id[j] = 0;
-
- disk->removable = pd_scratch[0] & 0x80;
-
- printk("%s: %s, %s, %d blocks [%dM], (%d/%d/%d), %s media\n",
- disk->name, id,
- disk->drive ? "slave" : "master",
- disk->capacity, disk->capacity / 2048,
- disk->cylinders, disk->heads, disk->sectors,
- disk->removable ? "removable" : "fixed");
-
- if (disk->capacity)
- pd_init_dev_parms(disk);
- if (!disk->standby)
- pd_standby_off(disk);
-
- return Ok;
-}
-
-/* end of io request engine */
-
-static void do_pd_request(struct request_queue * q)
-{
- if (pd_req)
- return;
- pd_req = blk_fetch_request(q);
- if (!pd_req)
- return;
-
- schedule_fsm();
-}
-
-static int pd_special_command(struct pd_unit *disk,
- enum action (*func)(struct pd_unit *disk))
-{
- struct request *rq;
-
- rq = blk_get_request(disk->gd->queue, REQ_OP_DRV_IN, __GFP_RECLAIM);
- if (IS_ERR(rq))
- return PTR_ERR(rq);
-
- rq->special = func;
- blk_execute_rq(disk->gd->queue, disk->gd, rq, 0);
- blk_put_request(rq);
- return 0;
-}
-
-/* kernel glue structures */
-
-static int pd_open(struct block_device *bdev, fmode_t mode)
-{
- struct pd_unit *disk = bdev->bd_disk->private_data;
-
- mutex_lock(&pd_mutex);
- disk->access++;
-
- if (disk->removable) {
- pd_special_command(disk, pd_media_check);
- pd_special_command(disk, pd_door_lock);
- }
- mutex_unlock(&pd_mutex);
- return 0;
-}
-
-static int pd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
-{
- struct pd_unit *disk = bdev->bd_disk->private_data;
-
- if (disk->alt_geom) {
- geo->heads = PD_LOG_HEADS;
- geo->sectors = PD_LOG_SECTS;
- geo->cylinders = disk->capacity / (geo->heads * geo->sectors);
- } else {
- geo->heads = disk->heads;
- geo->sectors = disk->sectors;
- geo->cylinders = disk->cylinders;
- }
-
- return 0;
-}
-
-static int pd_ioctl(struct block_device *bdev, fmode_t mode,
- unsigned int cmd, unsigned long arg)
-{
- struct pd_unit *disk = bdev->bd_disk->private_data;
-
- switch (cmd) {
- case CDROMEJECT:
- mutex_lock(&pd_mutex);
- if (disk->access == 1)
- pd_special_command(disk, pd_eject);
- mutex_unlock(&pd_mutex);
- return 0;
- default:
- return -EINVAL;
- }
-}
-
-static void pd_release(struct gendisk *p, fmode_t mode)
-{
- struct pd_unit *disk = p->private_data;
-
- mutex_lock(&pd_mutex);
- if (!--disk->access && disk->removable)
- pd_special_command(disk, pd_door_unlock);
- mutex_unlock(&pd_mutex);
-}
-
-static unsigned int pd_check_events(struct gendisk *p, unsigned int clearing)
-{
- struct pd_unit *disk = p->private_data;
- int r;
- if (!disk->removable)
- return 0;
- pd_special_command(disk, pd_media_check);
- r = disk->changed;
- disk->changed = 0;
- return r ? DISK_EVENT_MEDIA_CHANGE : 0;
-}
-
-static int pd_revalidate(struct gendisk *p)
-{
- struct pd_unit *disk = p->private_data;
- if (pd_special_command(disk, pd_identify) == 0)
- set_capacity(p, disk->capacity);
- else
- set_capacity(p, 0);
- return 0;
-}
-
-static const struct block_device_operations pd_fops = {
- .owner = THIS_MODULE,
- .open = pd_open,
- .release = pd_release,
- .ioctl = pd_ioctl,
- .getgeo = pd_getgeo,
- .check_events = pd_check_events,
- .revalidate_disk= pd_revalidate
-};
-
-/* probing */
-
-static void pd_probe_drive(struct pd_unit *disk)
-{
- struct gendisk *p = alloc_disk(1 << PD_BITS);
- if (!p)
- return;
- strcpy(p->disk_name, disk->name);
- p->fops = &pd_fops;
- p->major = major;
- p->first_minor = (disk - pd) << PD_BITS;
- disk->gd = p;
- p->private_data = disk;
- p->queue = blk_init_queue(do_pd_request, &pd_lock);
- if (!p->queue) {
- disk->gd = NULL;
- put_disk(p);
- return;
- }
- blk_queue_max_hw_sectors(p->queue, cluster);
- blk_queue_bounce_limit(p->queue, BLK_BOUNCE_HIGH);
-
- if (disk->drive == -1) {
- for (disk->drive = 0; disk->drive <= 1; disk->drive++)
- if (pd_special_command(disk, pd_identify) == 0)
- return;
- } else if (pd_special_command(disk, pd_identify) == 0)
- return;
- disk->gd = NULL;
- put_disk(p);
-}
-
-static int pd_detect(void)
-{
- int found = 0, unit, pd_drive_count = 0;
- struct pd_unit *disk;
-
- for (unit = 0; unit < PD_UNITS; unit++) {
- int *parm = *drives[unit];
- struct pd_unit *disk = pd + unit;
- disk->pi = &disk->pia;
- disk->access = 0;
- disk->changed = 1;
- disk->capacity = 0;
- disk->drive = parm[D_SLV];
- snprintf(disk->name, PD_NAMELEN, "%s%c", name, 'a'+unit);
- disk->alt_geom = parm[D_GEO];
- disk->standby = parm[D_SBY];
- if (parm[D_PRT])
- pd_drive_count++;
- }
-
- par_drv = pi_register_driver(name);
- if (!par_drv) {
- pr_err("failed to register %s driver\n", name);
- return -1;
- }
-
- if (pd_drive_count == 0) { /* nothing spec'd - so autoprobe for 1 */
- disk = pd;
- if (pi_init(disk->pi, 1, -1, -1, -1, -1, -1, pd_scratch,
- PI_PD, verbose, disk->name)) {
- pd_probe_drive(disk);
- if (!disk->gd)
- pi_release(disk->pi);
- }
-
- } else {
- for (unit = 0, disk = pd; unit < PD_UNITS; unit++, disk++) {
- int *parm = *drives[unit];
- if (!parm[D_PRT])
- continue;
- if (pi_init(disk->pi, 0, parm[D_PRT], parm[D_MOD],
- parm[D_UNI], parm[D_PRO], parm[D_DLY],
- pd_scratch, PI_PD, verbose, disk->name)) {
- pd_probe_drive(disk);
- if (!disk->gd)
- pi_release(disk->pi);
- }
- }
- }
- for (unit = 0, disk = pd; unit < PD_UNITS; unit++, disk++) {
- if (disk->gd) {
- set_capacity(disk->gd, disk->capacity);
- add_disk(disk->gd);
- found = 1;
- }
- }
- if (!found) {
- printk("%s: no valid drive found\n", name);
- pi_unregister_driver(par_drv);
- }
- return found;
-}
-
-static int __init pd_init(void)
-{
- if (disable)
- goto out1;
-
- if (register_blkdev(major, name))
- goto out1;
-
- printk("%s: %s version %s, major %d, cluster %d, nice %d\n",
- name, name, PD_VERSION, major, cluster, nice);
- if (!pd_detect())
- goto out2;
-
- return 0;
-
-out2:
- unregister_blkdev(major, name);
-out1:
- return -ENODEV;
-}
-
-static void __exit pd_exit(void)
-{
- struct pd_unit *disk;
- int unit;
- unregister_blkdev(major, name);
- for (unit = 0, disk = pd; unit < PD_UNITS; unit++, disk++) {
- struct gendisk *p = disk->gd;
- if (p) {
- disk->gd = NULL;
- del_gendisk(p);
- blk_cleanup_queue(p->queue);
- put_disk(p);
- pi_release(disk->pi);
- }
- }
-}
-
-MODULE_LICENSE("GPL");
-module_init(pd_init)
-module_exit(pd_exit)
diff --git a/drivers/block/paride/pf.c b/drivers/block/paride/pf.c
deleted file mode 100644
index eef7a91f667d..000000000000
--- a/drivers/block/paride/pf.c
+++ /dev/null
@@ -1,1034 +0,0 @@
-/*
- pf.c (c) 1997-8 Grant R. Guenther <grant@xxxxxxxxxx>
- Under the terms of the GNU General Public License.
-
- This is the high-level driver for parallel port ATAPI disk
- drives based on chips supported by the paride module.
-
- By default, the driver will autoprobe for a single parallel
- port ATAPI disk drive, but if their individual parameters are
- specified, the driver can handle up to 4 drives.
-
- The behaviour of the pf driver can be altered by setting
- some parameters from the insmod command line. The following
- parameters are adjustable:
-
- drive0 These four arguments can be arrays of
- drive1 1-7 integers as follows:
- drive2
- drive3 <prt>,<pro>,<uni>,<mod>,<slv>,<lun>,<dly>
-
- Where,
-
- <prt> is the base of the parallel port address for
- the corresponding drive. (required)
-
- <pro> is the protocol number for the adapter that
- supports this drive. These numbers are
- logged by 'paride' when the protocol modules
- are initialised. (0 if not given)
-
- <uni> for those adapters that support chained
- devices, this is the unit selector for the
- chain of devices on the given port. It should
- be zero for devices that don't support chaining.
- (0 if not given)
-
- <mod> this can be -1 to choose the best mode, or one
- of the mode numbers supported by the adapter.
- (-1 if not given)
-
- <slv> ATAPI CDroms can be jumpered to master or slave.
- Set this to 0 to choose the master drive, 1 to
- choose the slave, -1 (the default) to choose the
- first drive found.
-
- <lun> Some ATAPI devices support multiple LUNs.
- One example is the ATAPI PD/CD drive from
- Matshita/Panasonic. This device has a
- CD drive on LUN 0 and a PD drive on LUN 1.
- By default, the driver will search for the
- first LUN with a supported device. Set
- this parameter to force it to use a specific
- LUN. (default -1)
-
- <dly> some parallel ports require the driver to
- go more slowly. -1 sets a default value that
- should work with the chosen protocol. Otherwise,
- set this to a small integer, the larger it is
- the slower the port i/o. In some cases, setting
- this to zero will speed up the device. (default -1)
-
- major You may use this parameter to override the
- default major number (47) that this driver
- will use. Be sure to change the device
- name as well.
-
- name This parameter is a character string that
- contains the name the kernel will use for this
- device (in /proc output, for instance).
- (default "pf").
-
- cluster The driver will attempt to aggregate requests
- for adjacent blocks into larger multi-block
- clusters. The maximum cluster size (in 512
- byte sectors) is set with this parameter.
- (default 64)
-
- verbose This parameter controls the amount of logging
- that the driver will do. Set it to 0 for
- normal operation, 1 to see autoprobe progress
- messages, or 2 to see additional debugging
- output. (default 0)
-
- nice This parameter controls the driver's use of
- idle CPU time, at the expense of some speed.
-
- If this driver is built into the kernel, you can use the
- following command line parameters, with the same values
- as the corresponding module parameters listed above:
-
- pf.drive0
- pf.drive1
- pf.drive2
- pf.drive3
- pf.cluster
- pf.nice
-
- In addition, you can use the parameter pf.disable to disable
- the driver entirely.
-
-*/
-
-/* Changes:
-
- 1.01 GRG 1998.05.03 Changes for SMP. Eliminate sti().
- Fix for drives that don't clear STAT_ERR
- until after next CDB delivered.
- Small change in pf_completion to round
- up transfer size.
- 1.02 GRG 1998.06.16 Eliminated an Ugh
- 1.03 GRG 1998.08.16 Use HZ in loop timings, extra debugging
- 1.04 GRG 1998.09.24 Added jumbo support
-
-*/
-
-#define PF_VERSION "1.04"
-#define PF_MAJOR 47
-#define PF_NAME "pf"
-#define PF_UNITS 4
-
-#include <linux/types.h>
-
-/* Here are things one can override from the insmod command.
- Most are autoprobed by paride unless set here. Verbose is off
- by default.
-
-*/
-
-static bool verbose = 0;
-static int major = PF_MAJOR;
-static char *name = PF_NAME;
-static int cluster = 64;
-static int nice = 0;
-static int disable = 0;
-
-static int drive0[7] = { 0, 0, 0, -1, -1, -1, -1 };
-static int drive1[7] = { 0, 0, 0, -1, -1, -1, -1 };
-static int drive2[7] = { 0, 0, 0, -1, -1, -1, -1 };
-static int drive3[7] = { 0, 0, 0, -1, -1, -1, -1 };
-
-static int (*drives[4])[7] = {&drive0, &drive1, &drive2, &drive3};
-static int pf_drive_count;
-
-enum {D_PRT, D_PRO, D_UNI, D_MOD, D_SLV, D_LUN, D_DLY};
-
-/* end of parameters */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/delay.h>
-#include <linux/hdreg.h>
-#include <linux/cdrom.h>
-#include <linux/spinlock.h>
-#include <linux/blkdev.h>
-#include <linux/blkpg.h>
-#include <linux/mutex.h>
-#include <linux/uaccess.h>
-
-static DEFINE_MUTEX(pf_mutex);
-static DEFINE_SPINLOCK(pf_spin_lock);
-
-module_param(verbose, bool, 0644);
-module_param(major, int, 0);
-module_param(name, charp, 0);
-module_param(cluster, int, 0);
-module_param(nice, int, 0);
-module_param_array(drive0, int, NULL, 0);
-module_param_array(drive1, int, NULL, 0);
-module_param_array(drive2, int, NULL, 0);
-module_param_array(drive3, int, NULL, 0);
-
-#include "paride.h"
-#include "pseudo.h"
-
-/* constants for faking geometry numbers */
-
-#define PF_FD_MAX 8192 /* use FD geometry under this size */
-#define PF_FD_HDS 2
-#define PF_FD_SPT 18
-#define PF_HD_HDS 64
-#define PF_HD_SPT 32
-
-#define PF_MAX_RETRIES 5
-#define PF_TMO 800 /* interrupt timeout in jiffies */
-#define PF_SPIN_DEL 50 /* spin delay in micro-seconds */
-
-#define PF_SPIN (1000000*PF_TMO)/(HZ*PF_SPIN_DEL)
-
-#define STAT_ERR 0x00001
-#define STAT_INDEX 0x00002
-#define STAT_ECC 0x00004
-#define STAT_DRQ 0x00008
-#define STAT_SEEK 0x00010
-#define STAT_WRERR 0x00020
-#define STAT_READY 0x00040
-#define STAT_BUSY 0x00080
-
-#define ATAPI_REQ_SENSE 0x03
-#define ATAPI_LOCK 0x1e
-#define ATAPI_DOOR 0x1b
-#define ATAPI_MODE_SENSE 0x5a
-#define ATAPI_CAPACITY 0x25
-#define ATAPI_IDENTIFY 0x12
-#define ATAPI_READ_10 0x28
-#define ATAPI_WRITE_10 0x2a
-
-static int pf_open(struct block_device *bdev, fmode_t mode);
-static void do_pf_request(struct request_queue * q);
-static int pf_ioctl(struct block_device *bdev, fmode_t mode,
- unsigned int cmd, unsigned long arg);
-static int pf_getgeo(struct block_device *bdev, struct hd_geometry *geo);
-
-static void pf_release(struct gendisk *disk, fmode_t mode);
-
-static int pf_detect(void);
-static void do_pf_read(void);
-static void do_pf_read_start(void);
-static void do_pf_write(void);
-static void do_pf_write_start(void);
-static void do_pf_read_drq(void);
-static void do_pf_write_done(void);
-
-#define PF_NM 0
-#define PF_RO 1
-#define PF_RW 2
-
-#define PF_NAMELEN 8
-
-struct pf_unit {
- struct pi_adapter pia; /* interface to paride layer */
- struct pi_adapter *pi;
- int removable; /* removable media device ? */
- int media_status; /* media present ? WP ? */
- int drive; /* drive */
- int lun;
- int access; /* count of active opens ... */
- int present; /* device present ? */
- char name[PF_NAMELEN]; /* pf0, pf1, ... */
- struct gendisk *disk;
-};
-
-static struct pf_unit units[PF_UNITS];
-
-static int pf_identify(struct pf_unit *pf);
-static void pf_lock(struct pf_unit *pf, int func);
-static void pf_eject(struct pf_unit *pf);
-static unsigned int pf_check_events(struct gendisk *disk,
- unsigned int clearing);
-
-static char pf_scratch[512]; /* scratch block buffer */
-
-/* the variables below are used mainly in the I/O request engine, which
- processes only one request at a time.
-*/
-
-static int pf_retries = 0; /* i/o error retry count */
-static int pf_busy = 0; /* request being processed ? */
-static struct request *pf_req; /* current request */
-static int pf_block; /* address of next requested block */
-static int pf_count; /* number of blocks still to do */
-static int pf_run; /* sectors in current cluster */
-static int pf_cmd; /* current command READ/WRITE */
-static struct pf_unit *pf_current;/* unit of current request */
-static int pf_mask; /* stopper for pseudo-int */
-static char *pf_buf; /* buffer for request in progress */
-static void *par_drv; /* reference of parport driver */
-
-/* kernel glue structures */
-
-static const struct block_device_operations pf_fops = {
- .owner = THIS_MODULE,
- .open = pf_open,
- .release = pf_release,
- .ioctl = pf_ioctl,
- .getgeo = pf_getgeo,
- .check_events = pf_check_events,
-};
-
-static void __init pf_init_units(void)
-{
- struct pf_unit *pf;
- int unit;
-
- pf_drive_count = 0;
- for (unit = 0, pf = units; unit < PF_UNITS; unit++, pf++) {
- struct gendisk *disk = alloc_disk(1);
- if (!disk)
- continue;
- disk->queue = blk_init_queue(do_pf_request, &pf_spin_lock);
- if (!disk->queue) {
- put_disk(disk);
- return;
- }
- blk_queue_max_segments(disk->queue, cluster);
- blk_queue_bounce_limit(disk->queue, BLK_BOUNCE_HIGH);
- pf->disk = disk;
- pf->pi = &pf->pia;
- pf->media_status = PF_NM;
- pf->drive = (*drives[unit])[D_SLV];
- pf->lun = (*drives[unit])[D_LUN];
- snprintf(pf->name, PF_NAMELEN, "%s%d", name, unit);
- disk->major = major;
- disk->first_minor = unit;
- strcpy(disk->disk_name, pf->name);
- disk->fops = &pf_fops;
- if (!(*drives[unit])[D_PRT])
- pf_drive_count++;
- }
-}
-
-static int pf_open(struct block_device *bdev, fmode_t mode)
-{
- struct pf_unit *pf = bdev->bd_disk->private_data;
- int ret;
-
- mutex_lock(&pf_mutex);
- pf_identify(pf);
-
- ret = -ENODEV;
- if (pf->media_status == PF_NM)
- goto out;
-
- ret = -EROFS;
- if ((pf->media_status == PF_RO) && (mode & FMODE_WRITE))
- goto out;
-
- ret = 0;
- pf->access++;
- if (pf->removable)
- pf_lock(pf, 1);
-out:
- mutex_unlock(&pf_mutex);
- return ret;
-}
-
-static int pf_getgeo(struct block_device *bdev, struct hd_geometry *geo)
-{
- struct pf_unit *pf = bdev->bd_disk->private_data;
- sector_t capacity = get_capacity(pf->disk);
-
- if (capacity < PF_FD_MAX) {
- geo->cylinders = sector_div(capacity, PF_FD_HDS * PF_FD_SPT);
- geo->heads = PF_FD_HDS;
- geo->sectors = PF_FD_SPT;
- } else {
- geo->cylinders = sector_div(capacity, PF_HD_HDS * PF_HD_SPT);
- geo->heads = PF_HD_HDS;
- geo->sectors = PF_HD_SPT;
- }
-
- return 0;
-}
-
-static int pf_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd, unsigned long arg)
-{
- struct pf_unit *pf = bdev->bd_disk->private_data;
-
- if (cmd != CDROMEJECT)
- return -EINVAL;
-
- if (pf->access != 1)
- return -EBUSY;
- mutex_lock(&pf_mutex);
- pf_eject(pf);
- mutex_unlock(&pf_mutex);
-
- return 0;
-}
-
-static void pf_release(struct gendisk *disk, fmode_t mode)
-{
- struct pf_unit *pf = disk->private_data;
-
- mutex_lock(&pf_mutex);
- if (pf->access <= 0) {
- mutex_unlock(&pf_mutex);
- WARN_ON(1);
- return;
- }
-
- pf->access--;
-
- if (!pf->access && pf->removable)
- pf_lock(pf, 0);
-
- mutex_unlock(&pf_mutex);
-}
-
-static unsigned int pf_check_events(struct gendisk *disk, unsigned int clearing)
-{
- return DISK_EVENT_MEDIA_CHANGE;
-}
-
-static inline int status_reg(struct pf_unit *pf)
-{
- return pi_read_regr(pf->pi, 1, 6);
-}
-
-static inline int read_reg(struct pf_unit *pf, int reg)
-{
- return pi_read_regr(pf->pi, 0, reg);
-}
-
-static inline void write_reg(struct pf_unit *pf, int reg, int val)
-{
- pi_write_regr(pf->pi, 0, reg, val);
-}
-
-static int pf_wait(struct pf_unit *pf, int go, int stop, char *fun, char *msg)
-{
- int j, r, e, s, p;
-
- j = 0;
- while ((((r = status_reg(pf)) & go) || (stop && (!(r & stop))))
- && (j++ < PF_SPIN))
- udelay(PF_SPIN_DEL);
-
- if ((r & (STAT_ERR & stop)) || (j > PF_SPIN)) {
- s = read_reg(pf, 7);
- e = read_reg(pf, 1);
- p = read_reg(pf, 2);
- if (j > PF_SPIN)
- e |= 0x100;
- if (fun)
- printk("%s: %s %s: alt=0x%x stat=0x%x err=0x%x"
- " loop=%d phase=%d\n",
- pf->name, fun, msg, r, s, e, j, p);
- return (e << 8) + s;
- }
- return 0;
-}
-
-static int pf_command(struct pf_unit *pf, char *cmd, int dlen, char *fun)
-{
- pi_connect(pf->pi);
-
- write_reg(pf, 6, 0xa0+0x10*pf->drive);
-
- if (pf_wait(pf, STAT_BUSY | STAT_DRQ, 0, fun, "before command")) {
- pi_disconnect(pf->pi);
- return -1;
- }
-
- write_reg(pf, 4, dlen % 256);
- write_reg(pf, 5, dlen / 256);
- write_reg(pf, 7, 0xa0); /* ATAPI packet command */
-
- if (pf_wait(pf, STAT_BUSY, STAT_DRQ, fun, "command DRQ")) {
- pi_disconnect(pf->pi);
- return -1;
- }
-
- if (read_reg(pf, 2) != 1) {
- printk("%s: %s: command phase error\n", pf->name, fun);
- pi_disconnect(pf->pi);
- return -1;
- }
-
- pi_write_block(pf->pi, cmd, 12);
-
- return 0;
-}
-
-static int pf_completion(struct pf_unit *pf, char *buf, char *fun)
-{
- int r, s, n;
-
- r = pf_wait(pf, STAT_BUSY, STAT_DRQ | STAT_READY | STAT_ERR,
- fun, "completion");
-
- if ((read_reg(pf, 2) & 2) && (read_reg(pf, 7) & STAT_DRQ)) {
- n = (((read_reg(pf, 4) + 256 * read_reg(pf, 5)) +
- 3) & 0xfffc);
- pi_read_block(pf->pi, buf, n);
- }
-
- s = pf_wait(pf, STAT_BUSY, STAT_READY | STAT_ERR, fun, "data done");
-
- pi_disconnect(pf->pi);
-
- return (r ? r : s);
-}
-
-static void pf_req_sense(struct pf_unit *pf, int quiet)
-{
- char rs_cmd[12] =
- { ATAPI_REQ_SENSE, pf->lun << 5, 0, 0, 16, 0, 0, 0, 0, 0, 0, 0 };
- char buf[16];
- int r;
-
- r = pf_command(pf, rs_cmd, 16, "Request sense");
- mdelay(1);
- if (!r)
- pf_completion(pf, buf, "Request sense");
-
- if ((!r) && (!quiet))
- printk("%s: Sense key: %x, ASC: %x, ASQ: %x\n",
- pf->name, buf[2] & 0xf, buf[12], buf[13]);
-}
-
-static int pf_atapi(struct pf_unit *pf, char *cmd, int dlen, char *buf, char *fun)
-{
- int r;
-
- r = pf_command(pf, cmd, dlen, fun);
- mdelay(1);
- if (!r)
- r = pf_completion(pf, buf, fun);
- if (r)
- pf_req_sense(pf, !fun);
-
- return r;
-}
-
-static void pf_lock(struct pf_unit *pf, int func)
-{
- char lo_cmd[12] = { ATAPI_LOCK, pf->lun << 5, 0, 0, func, 0, 0, 0, 0, 0, 0, 0 };
-
- pf_atapi(pf, lo_cmd, 0, pf_scratch, func ? "lock" : "unlock");
-}
-
-static void pf_eject(struct pf_unit *pf)
-{
- char ej_cmd[12] = { ATAPI_DOOR, pf->lun << 5, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0 };
-
- pf_lock(pf, 0);
- pf_atapi(pf, ej_cmd, 0, pf_scratch, "eject");
-}
-
-#define PF_RESET_TMO 30 /* in tenths of a second */
-
-static void pf_sleep(int cs)
-{
- schedule_timeout_interruptible(cs);
-}
-
-/* the ATAPI standard actually specifies the contents of all 7 registers
- after a reset, but the specification is ambiguous concerning the last
- two bytes, and different drives interpret the standard differently.
- */
-
-static int pf_reset(struct pf_unit *pf)
-{
- int i, k, flg;
- int expect[5] = { 1, 1, 1, 0x14, 0xeb };
-
- pi_connect(pf->pi);
- write_reg(pf, 6, 0xa0+0x10*pf->drive);
- write_reg(pf, 7, 8);
-
- pf_sleep(20 * HZ / 1000);
-
- k = 0;
- while ((k++ < PF_RESET_TMO) && (status_reg(pf) & STAT_BUSY))
- pf_sleep(HZ / 10);
-
- flg = 1;
- for (i = 0; i < 5; i++)
- flg &= (read_reg(pf, i + 1) == expect[i]);
-
- if (verbose) {
- printk("%s: Reset (%d) signature = ", pf->name, k);
- for (i = 0; i < 5; i++)
- printk("%3x", read_reg(pf, i + 1));
- if (!flg)
- printk(" (incorrect)");
- printk("\n");
- }
-
- pi_disconnect(pf->pi);
- return flg - 1;
-}
-
-static void pf_mode_sense(struct pf_unit *pf)
-{
- char ms_cmd[12] =
- { ATAPI_MODE_SENSE, pf->lun << 5, 0, 0, 0, 0, 0, 0, 8, 0, 0, 0 };
- char buf[8];
-
- pf_atapi(pf, ms_cmd, 8, buf, "mode sense");
- pf->media_status = PF_RW;
- if (buf[3] & 0x80)
- pf->media_status = PF_RO;
-}
-
-static void xs(char *buf, char *targ, int offs, int len)
-{
- int j, k, l;
-
- j = 0;
- l = 0;
- for (k = 0; k < len; k++)
- if ((buf[k + offs] != 0x20) || (buf[k + offs] != l))
- l = targ[j++] = buf[k + offs];
- if (l == 0x20)
- j--;
- targ[j] = 0;
-}
-
-static int xl(char *buf, int offs)
-{
- int v, k;
-
- v = 0;
- for (k = 0; k < 4; k++)
- v = v * 256 + (buf[k + offs] & 0xff);
- return v;
-}
-
-static void pf_get_capacity(struct pf_unit *pf)
-{
- char rc_cmd[12] = { ATAPI_CAPACITY, pf->lun << 5, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
- char buf[8];
- int bs;
-
- if (pf_atapi(pf, rc_cmd, 8, buf, "get capacity")) {
- pf->media_status = PF_NM;
- return;
- }
- set_capacity(pf->disk, xl(buf, 0) + 1);
- bs = xl(buf, 4);
- if (bs != 512) {
- set_capacity(pf->disk, 0);
- if (verbose)
- printk("%s: Drive %d, LUN %d,"
- " unsupported block size %d\n",
- pf->name, pf->drive, pf->lun, bs);
- }
-}
-
-static int pf_identify(struct pf_unit *pf)
-{
- int dt, s;
- char *ms[2] = { "master", "slave" };
- char mf[10], id[18];
- char id_cmd[12] =
- { ATAPI_IDENTIFY, pf->lun << 5, 0, 0, 36, 0, 0, 0, 0, 0, 0, 0 };
- char buf[36];
-
- s = pf_atapi(pf, id_cmd, 36, buf, "identify");
- if (s)
- return -1;
-
- dt = buf[0] & 0x1f;
- if ((dt != 0) && (dt != 7)) {
- if (verbose)
- printk("%s: Drive %d, LUN %d, unsupported type %d\n",
- pf->name, pf->drive, pf->lun, dt);
- return -1;
- }
-
- xs(buf, mf, 8, 8);
- xs(buf, id, 16, 16);
-
- pf->removable = (buf[1] & 0x80);
-
- pf_mode_sense(pf);
- pf_mode_sense(pf);
- pf_mode_sense(pf);
-
- pf_get_capacity(pf);
-
- printk("%s: %s %s, %s LUN %d, type %d",
- pf->name, mf, id, ms[pf->drive], pf->lun, dt);
- if (pf->removable)
- printk(", removable");
- if (pf->media_status == PF_NM)
- printk(", no media\n");
- else {
- if (pf->media_status == PF_RO)
- printk(", RO");
- printk(", %llu blocks\n",
- (unsigned long long)get_capacity(pf->disk));
- }
- return 0;
-}
-
-/* returns 0, with id set if drive is detected
- -1, if drive detection failed
-*/
-static int pf_probe(struct pf_unit *pf)
-{
- if (pf->drive == -1) {
- for (pf->drive = 0; pf->drive <= 1; pf->drive++)
- if (!pf_reset(pf)) {
- if (pf->lun != -1)
- return pf_identify(pf);
- else
- for (pf->lun = 0; pf->lun < 8; pf->lun++)
- if (!pf_identify(pf))
- return 0;
- }
- } else {
- if (pf_reset(pf))
- return -1;
- if (pf->lun != -1)
- return pf_identify(pf);
- for (pf->lun = 0; pf->lun < 8; pf->lun++)
- if (!pf_identify(pf))
- return 0;
- }
- return -1;
-}
-
-static int pf_detect(void)
-{
- struct pf_unit *pf = units;
- int k, unit;
-
- printk("%s: %s version %s, major %d, cluster %d, nice %d\n",
- name, name, PF_VERSION, major, cluster, nice);
-
- par_drv = pi_register_driver(name);
- if (!par_drv) {
- pr_err("failed to register %s driver\n", name);
- return -1;
- }
- k = 0;
- if (pf_drive_count == 0) {
- if (pi_init(pf->pi, 1, -1, -1, -1, -1, -1, pf_scratch, PI_PF,
- verbose, pf->name)) {
- if (!pf_probe(pf) && pf->disk) {
- pf->present = 1;
- k++;
- } else
- pi_release(pf->pi);
- }
-
- } else
- for (unit = 0; unit < PF_UNITS; unit++, pf++) {
- int *conf = *drives[unit];
- if (!conf[D_PRT])
- continue;
- if (pi_init(pf->pi, 0, conf[D_PRT], conf[D_MOD],
- conf[D_UNI], conf[D_PRO], conf[D_DLY],
- pf_scratch, PI_PF, verbose, pf->name)) {
- if (pf->disk && !pf_probe(pf)) {
- pf->present = 1;
- k++;
- } else
- pi_release(pf->pi);
- }
- }
- if (k)
- return 0;
-
- printk("%s: No ATAPI disk detected\n", name);
- for (pf = units, unit = 0; unit < PF_UNITS; pf++, unit++)
- put_disk(pf->disk);
- pi_unregister_driver(par_drv);
- return -1;
-}
-
-/* The i/o request engine */
-
-static int pf_start(struct pf_unit *pf, int cmd, int b, int c)
-{
- int i;
- char io_cmd[12] = { cmd, pf->lun << 5, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
-
- for (i = 0; i < 4; i++) {
- io_cmd[5 - i] = b & 0xff;
- b = b >> 8;
- }
-
- io_cmd[8] = c & 0xff;
- io_cmd[7] = (c >> 8) & 0xff;
-
- i = pf_command(pf, io_cmd, c * 512, "start i/o");
-
- mdelay(1);
-
- return i;
-}
-
-static int pf_ready(void)
-{
- return (((status_reg(pf_current) & (STAT_BUSY | pf_mask)) == pf_mask));
-}
-
-static int pf_queue;
-
-static int set_next_request(void)
-{
- struct pf_unit *pf;
- struct request_queue *q;
- int old_pos = pf_queue;
-
- do {
- pf = &units[pf_queue];
- q = pf->present ? pf->disk->queue : NULL;
- if (++pf_queue == PF_UNITS)
- pf_queue = 0;
- if (q) {
- pf_req = blk_fetch_request(q);
- if (pf_req)
- break;
- }
- } while (pf_queue != old_pos);
-
- return pf_req != NULL;
-}
-
-static void pf_end_request(blk_status_t err)
-{
- if (pf_req && !__blk_end_request_cur(pf_req, err))
- pf_req = NULL;
-}
-
-static void pf_request(void)
-{
- if (pf_busy)
- return;
-repeat:
- if (!pf_req && !set_next_request())
- return;
-
- pf_current = pf_req->rq_disk->private_data;
- pf_block = blk_rq_pos(pf_req);
- pf_run = blk_rq_sectors(pf_req);
- pf_count = blk_rq_cur_sectors(pf_req);
-
- if (pf_block + pf_count > get_capacity(pf_req->rq_disk)) {
- pf_end_request(BLK_STS_IOERR);
- goto repeat;
- }
-
- pf_cmd = rq_data_dir(pf_req);
- pf_buf = bio_data(pf_req->bio);
- pf_retries = 0;
-
- pf_busy = 1;
- if (pf_cmd == READ)
- pi_do_claimed(pf_current->pi, do_pf_read);
- else if (pf_cmd == WRITE)
- pi_do_claimed(pf_current->pi, do_pf_write);
- else {
- pf_busy = 0;
- pf_end_request(BLK_STS_IOERR);
- goto repeat;
- }
-}
-
-static void do_pf_request(struct request_queue *q)
-{
- pf_request();
-}
-
-static int pf_next_buf(void)
-{
- unsigned long saved_flags;
-
- pf_count--;
- pf_run--;
- pf_buf += 512;
- pf_block++;
- if (!pf_run)
- return 1;
- if (!pf_count) {
- spin_lock_irqsave(&pf_spin_lock, saved_flags);
- pf_end_request(0);
- spin_unlock_irqrestore(&pf_spin_lock, saved_flags);
- if (!pf_req)
- return 1;
- pf_count = blk_rq_cur_sectors(pf_req);
- pf_buf = bio_data(pf_req->bio);
- }
- return 0;
-}
-
-static inline void next_request(blk_status_t err)
-{
- unsigned long saved_flags;
-
- spin_lock_irqsave(&pf_spin_lock, saved_flags);
- pf_end_request(err);
- pf_busy = 0;
- pf_request();
- spin_unlock_irqrestore(&pf_spin_lock, saved_flags);
-}
-
-/* detach from the calling context - in case the spinlock is held */
-static void do_pf_read(void)
-{
- ps_set_intr(do_pf_read_start, NULL, 0, nice);
-}
-
-static void do_pf_read_start(void)
-{
- pf_busy = 1;
-
- if (pf_start(pf_current, ATAPI_READ_10, pf_block, pf_run)) {
- pi_disconnect(pf_current->pi);
- if (pf_retries < PF_MAX_RETRIES) {
- pf_retries++;
- pi_do_claimed(pf_current->pi, do_pf_read_start);
- return;
- }
- next_request(BLK_STS_IOERR);
- return;
- }
- pf_mask = STAT_DRQ;
- ps_set_intr(do_pf_read_drq, pf_ready, PF_TMO, nice);
-}
-
-static void do_pf_read_drq(void)
-{
- while (1) {
- if (pf_wait(pf_current, STAT_BUSY, STAT_DRQ | STAT_ERR,
- "read block", "completion") & STAT_ERR) {
- pi_disconnect(pf_current->pi);
- if (pf_retries < PF_MAX_RETRIES) {
- pf_req_sense(pf_current, 0);
- pf_retries++;
- pi_do_claimed(pf_current->pi, do_pf_read_start);
- return;
- }
- next_request(BLK_STS_IOERR);
- return;
- }
- pi_read_block(pf_current->pi, pf_buf, 512);
- if (pf_next_buf())
- break;
- }
- pi_disconnect(pf_current->pi);
- next_request(0);
-}
-
-static void do_pf_write(void)
-{
- ps_set_intr(do_pf_write_start, NULL, 0, nice);
-}
-
-static void do_pf_write_start(void)
-{
- pf_busy = 1;
-
- if (pf_start(pf_current, ATAPI_WRITE_10, pf_block, pf_run)) {
- pi_disconnect(pf_current->pi);
- if (pf_retries < PF_MAX_RETRIES) {
- pf_retries++;
- pi_do_claimed(pf_current->pi, do_pf_write_start);
- return;
- }
- next_request(BLK_STS_IOERR);
- return;
- }
-
- while (1) {
- if (pf_wait(pf_current, STAT_BUSY, STAT_DRQ | STAT_ERR,
- "write block", "data wait") & STAT_ERR) {
- pi_disconnect(pf_current->pi);
- if (pf_retries < PF_MAX_RETRIES) {
- pf_retries++;
- pi_do_claimed(pf_current->pi, do_pf_write_start);
- return;
- }
- next_request(BLK_STS_IOERR);
- return;
- }
- pi_write_block(pf_current->pi, pf_buf, 512);
- if (pf_next_buf())
- break;
- }
- pf_mask = 0;
- ps_set_intr(do_pf_write_done, pf_ready, PF_TMO, nice);
-}
-
-static void do_pf_write_done(void)
-{
- if (pf_wait(pf_current, STAT_BUSY, 0, "write block", "done") & STAT_ERR) {
- pi_disconnect(pf_current->pi);
- if (pf_retries < PF_MAX_RETRIES) {
- pf_retries++;
- pi_do_claimed(pf_current->pi, do_pf_write_start);
- return;
- }
- next_request(BLK_STS_IOERR);
- return;
- }
- pi_disconnect(pf_current->pi);
- next_request(0);
-}
-
-static int __init pf_init(void)
-{ /* preliminary initialisation */
- struct pf_unit *pf;
- int unit;
-
- if (disable)
- return -EINVAL;
-
- pf_init_units();
-
- if (pf_detect())
- return -ENODEV;
- pf_busy = 0;
-
- if (register_blkdev(major, name)) {
- for (pf = units, unit = 0; unit < PF_UNITS; pf++, unit++)
- put_disk(pf->disk);
- return -EBUSY;
- }
-
- for (pf = units, unit = 0; unit < PF_UNITS; pf++, unit++) {
- struct gendisk *disk = pf->disk;
-
- if (!pf->present)
- continue;
- disk->private_data = pf;
- add_disk(disk);
- }
- return 0;
-}
-
-static void __exit pf_exit(void)
-{
- struct pf_unit *pf;
- int unit;
- unregister_blkdev(major, name);
- for (pf = units, unit = 0; unit < PF_UNITS; pf++, unit++) {
- if (!pf->present)
- continue;
- del_gendisk(pf->disk);
- blk_cleanup_queue(pf->disk->queue);
- put_disk(pf->disk);
- pi_release(pf->pi);
- }
-}
-
-MODULE_LICENSE("GPL");
-module_init(pf_init)
-module_exit(pf_exit)
diff --git a/drivers/block/paride/pg.c b/drivers/block/paride/pg.c
deleted file mode 100644
index 3b5882bfb736..000000000000
--- a/drivers/block/paride/pg.c
+++ /dev/null
@@ -1,734 +0,0 @@
-/*
- pg.c (c) 1998 Grant R. Guenther <grant@xxxxxxxxxx>
- Under the terms of the GNU General Public License.
-
- The pg driver provides a simple character device interface for
- sending ATAPI commands to a device. With the exception of the
- ATAPI reset operation, all operations are performed by a pair
- of read and write operations to the appropriate /dev/pgN device.
- A write operation delivers a command and any outbound data in
- a single buffer. Normally, the write will succeed unless the
- device is offline or malfunctioning, or there is already another
- command pending. If the write succeeds, it should be followed
- immediately by a read operation, to obtain any returned data and
- status information. A read will fail if there is no operation
- in progress.
-
- As a special case, the device can be reset with a write operation,
- and in this case, no following read is expected, or permitted.
-
- There are no ioctl() operations. Any single operation
- may transfer at most PG_MAX_DATA bytes. Note that the driver must
- copy the data through an internal buffer. In keeping with all
- current ATAPI devices, command packets are assumed to be exactly
- 12 bytes in length.
-
- To permit future changes to this interface, the headers in the
- read and write buffers contain a single character "magic" flag.
- Currently this flag must be the character "P".
-
- By default, the driver will autoprobe for a single parallel
- port ATAPI device, but if their individual parameters are
- specified, the driver can handle up to 4 devices.
-
- To use this device, you must have the following device
- special files defined:
-
- /dev/pg0 c 97 0
- /dev/pg1 c 97 1
- /dev/pg2 c 97 2
- /dev/pg3 c 97 3
-
- (You'll need to change the 97 to something else if you use
- the 'major' parameter to install the driver on a different
- major number.)
-
- The behaviour of the pg driver can be altered by setting
- some parameters from the insmod command line. The following
- parameters are adjustable:
-
- drive0 These four arguments can be arrays of
- drive1 1-6 integers as follows:
- drive2
- drive3 <prt>,<pro>,<uni>,<mod>,<slv>,<dly>
-
- Where,
-
- <prt> is the base of the parallel port address for
- the corresponding drive. (required)
-
- <pro> is the protocol number for the adapter that
- supports this drive. These numbers are
- logged by 'paride' when the protocol modules
- are initialised. (0 if not given)
-
- <uni> for those adapters that support chained
- devices, this is the unit selector for the
- chain of devices on the given port. It should
- be zero for devices that don't support chaining.
- (0 if not given)
-
- <mod> this can be -1 to choose the best mode, or one
- of the mode numbers supported by the adapter.
- (-1 if not given)
-
- <slv> ATAPI devices can be jumpered to master or slave.
- Set this to 0 to choose the master drive, 1 to
- choose the slave, -1 (the default) to choose the
- first drive found.
-
- <dly> some parallel ports require the driver to
- go more slowly. -1 sets a default value that
- should work with the chosen protocol. Otherwise,
- set this to a small integer, the larger it is
- the slower the port i/o. In some cases, setting
- this to zero will speed up the device. (default -1)
-
- major You may use this parameter to override the
- default major number (97) that this driver
- will use. Be sure to change the device
- name as well.
-
- name This parameter is a character string that
- contains the name the kernel will use for this
- device (in /proc output, for instance).
- (default "pg").
-
- verbose This parameter controls the amount of logging
- that is done by the driver. Set it to 0 for
- quiet operation, to 1 to enable progress
- messages while the driver probes for devices,
- or to 2 for full debug logging. (default 0)
-
- If this driver is built into the kernel, you can use
- the following command line parameters, with the same values
- as the corresponding module parameters listed above:
-
- pg.drive0
- pg.drive1
- pg.drive2
- pg.drive3
-
- In addition, you can use the parameter pg.disable to disable
- the driver entirely.
-
-*/
-
-/* Changes:
-
- 1.01 GRG 1998.06.16 Bug fixes
- 1.02 GRG 1998.09.24 Added jumbo support
-
-*/
-
-#define PG_VERSION "1.02"
-#define PG_MAJOR 97
-#define PG_NAME "pg"
-#define PG_UNITS 4
-
-#ifndef PI_PG
-#define PI_PG 4
-#endif
-
-#include <linux/types.h>
-/* Here are things one can override from the insmod command.
- Most are autoprobed by paride unless set here. Verbose is 0
- by default.
-
-*/
-
-static int verbose;
-static int major = PG_MAJOR;
-static char *name = PG_NAME;
-static int disable = 0;
-
-static int drive0[6] = { 0, 0, 0, -1, -1, -1 };
-static int drive1[6] = { 0, 0, 0, -1, -1, -1 };
-static int drive2[6] = { 0, 0, 0, -1, -1, -1 };
-static int drive3[6] = { 0, 0, 0, -1, -1, -1 };
-
-static int (*drives[4])[6] = {&drive0, &drive1, &drive2, &drive3};
-static int pg_drive_count;
-
-enum {D_PRT, D_PRO, D_UNI, D_MOD, D_SLV, D_DLY};
-
-/* end of parameters */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/mtio.h>
-#include <linux/pg.h>
-#include <linux/device.h>
-#include <linux/sched.h> /* current, TASK_* */
-#include <linux/mutex.h>
-#include <linux/jiffies.h>
-
-#include <linux/uaccess.h>
-
-module_param(verbose, int, 0644);
-module_param(major, int, 0);
-module_param(name, charp, 0);
-module_param_array(drive0, int, NULL, 0);
-module_param_array(drive1, int, NULL, 0);
-module_param_array(drive2, int, NULL, 0);
-module_param_array(drive3, int, NULL, 0);
-
-#include "paride.h"
-
-#define PG_SPIN_DEL 50 /* spin delay in micro-seconds */
-#define PG_SPIN 200
-#define PG_TMO HZ
-#define PG_RESET_TMO 10*HZ
-
-#define STAT_ERR 0x01
-#define STAT_INDEX 0x02
-#define STAT_ECC 0x04
-#define STAT_DRQ 0x08
-#define STAT_SEEK 0x10
-#define STAT_WRERR 0x20
-#define STAT_READY 0x40
-#define STAT_BUSY 0x80
-
-#define ATAPI_IDENTIFY 0x12
-
-static DEFINE_MUTEX(pg_mutex);
-static int pg_open(struct inode *inode, struct file *file);
-static int pg_release(struct inode *inode, struct file *file);
-static ssize_t pg_read(struct file *filp, char __user *buf,
- size_t count, loff_t * ppos);
-static ssize_t pg_write(struct file *filp, const char __user *buf,
- size_t count, loff_t * ppos);
-static int pg_detect(void);
-
-#define PG_NAMELEN 8
-
-struct pg {
- struct pi_adapter pia; /* interface to paride layer */
- struct pi_adapter *pi;
- int busy; /* write done, read expected */
- int start; /* jiffies at command start */
- int dlen; /* transfer size requested */
- unsigned long timeout; /* timeout requested */
- int status; /* last sense key */
- int drive; /* drive */
- unsigned long access; /* count of active opens ... */
- int present; /* device present ? */
- char *bufptr;
- char name[PG_NAMELEN]; /* pg0, pg1, ... */
-};
-
-static struct pg devices[PG_UNITS];
-
-static int pg_identify(struct pg *dev, int log);
-
-static char pg_scratch[512]; /* scratch block buffer */
-
-static struct class *pg_class;
-static void *par_drv; /* reference of parport driver */
-
-/* kernel glue structures */
-
-static const struct file_operations pg_fops = {
- .owner = THIS_MODULE,
- .read = pg_read,
- .write = pg_write,
- .open = pg_open,
- .release = pg_release,
- .llseek = noop_llseek,
-};
-
-static void pg_init_units(void)
-{
- int unit;
-
- pg_drive_count = 0;
- for (unit = 0; unit < PG_UNITS; unit++) {
- int *parm = *drives[unit];
- struct pg *dev = &devices[unit];
- dev->pi = &dev->pia;
- clear_bit(0, &dev->access);
- dev->busy = 0;
- dev->present = 0;
- dev->bufptr = NULL;
- dev->drive = parm[D_SLV];
- snprintf(dev->name, PG_NAMELEN, "%s%c", name, 'a'+unit);
- if (parm[D_PRT])
- pg_drive_count++;
- }
-}
-
-static inline int status_reg(struct pg *dev)
-{
- return pi_read_regr(dev->pi, 1, 6);
-}
-
-static inline int read_reg(struct pg *dev, int reg)
-{
- return pi_read_regr(dev->pi, 0, reg);
-}
-
-static inline void write_reg(struct pg *dev, int reg, int val)
-{
- pi_write_regr(dev->pi, 0, reg, val);
-}
-
-static inline u8 DRIVE(struct pg *dev)
-{
- return 0xa0+0x10*dev->drive;
-}
-
-static void pg_sleep(int cs)
-{
- schedule_timeout_interruptible(cs);
-}
-
-static int pg_wait(struct pg *dev, int go, int stop, unsigned long tmo, char *msg)
-{
- int j, r, e, s, p, to;
-
- dev->status = 0;
-
- j = 0;
- while ((((r = status_reg(dev)) & go) || (stop && (!(r & stop))))
- && time_before(jiffies, tmo)) {
- if (j++ < PG_SPIN)
- udelay(PG_SPIN_DEL);
- else
- pg_sleep(1);
- }
-
- to = time_after_eq(jiffies, tmo);
-
- if ((r & (STAT_ERR & stop)) || to) {
- s = read_reg(dev, 7);
- e = read_reg(dev, 1);
- p = read_reg(dev, 2);
- if (verbose > 1)
- printk("%s: %s: stat=0x%x err=0x%x phase=%d%s\n",
- dev->name, msg, s, e, p, to ? " timeout" : "");
- if (to)
- e |= 0x100;
- dev->status = (e >> 4) & 0xff;
- return -1;
- }
- return 0;
-}
-
-static int pg_command(struct pg *dev, char *cmd, int dlen, unsigned long tmo)
-{
- int k;
-
- pi_connect(dev->pi);
-
- write_reg(dev, 6, DRIVE(dev));
-
- if (pg_wait(dev, STAT_BUSY | STAT_DRQ, 0, tmo, "before command"))
- goto fail;
-
- write_reg(dev, 4, dlen % 256);
- write_reg(dev, 5, dlen / 256);
- write_reg(dev, 7, 0xa0); /* ATAPI packet command */
-
- if (pg_wait(dev, STAT_BUSY, STAT_DRQ, tmo, "command DRQ"))
- goto fail;
-
- if (read_reg(dev, 2) != 1) {
- printk("%s: command phase error\n", dev->name);
- goto fail;
- }
-
- pi_write_block(dev->pi, cmd, 12);
-
- if (verbose > 1) {
- printk("%s: Command sent, dlen=%d packet= ", dev->name, dlen);
- for (k = 0; k < 12; k++)
- printk("%02x ", cmd[k] & 0xff);
- printk("\n");
- }
- return 0;
-fail:
- pi_disconnect(dev->pi);
- return -1;
-}
-
-static int pg_completion(struct pg *dev, char *buf, unsigned long tmo)
-{
- int r, d, n, p;
-
- r = pg_wait(dev, STAT_BUSY, STAT_DRQ | STAT_READY | STAT_ERR,
- tmo, "completion");
-
- dev->dlen = 0;
-
- while (read_reg(dev, 7) & STAT_DRQ) {
- d = (read_reg(dev, 4) + 256 * read_reg(dev, 5));
- n = ((d + 3) & 0xfffc);
- p = read_reg(dev, 2) & 3;
- if (p == 0)
- pi_write_block(dev->pi, buf, n);
- if (p == 2)
- pi_read_block(dev->pi, buf, n);
- if (verbose > 1)
- printk("%s: %s %d bytes\n", dev->name,
- p ? "Read" : "Write", n);
- dev->dlen += (1 - p) * d;
- buf += d;
- r = pg_wait(dev, STAT_BUSY, STAT_DRQ | STAT_READY | STAT_ERR,
- tmo, "completion");
- }
-
- pi_disconnect(dev->pi);
-
- return r;
-}
-
-static int pg_reset(struct pg *dev)
-{
- int i, k, err;
- int expect[5] = { 1, 1, 1, 0x14, 0xeb };
- int got[5];
-
- pi_connect(dev->pi);
- write_reg(dev, 6, DRIVE(dev));
- write_reg(dev, 7, 8);
-
- pg_sleep(20 * HZ / 1000);
-
- k = 0;
- while ((k++ < PG_RESET_TMO) && (status_reg(dev) & STAT_BUSY))
- pg_sleep(1);
-
- for (i = 0; i < 5; i++)
- got[i] = read_reg(dev, i + 1);
-
- err = memcmp(expect, got, sizeof(got)) ? -1 : 0;
-
- if (verbose) {
- printk("%s: Reset (%d) signature = ", dev->name, k);
- for (i = 0; i < 5; i++)
- printk("%3x", got[i]);
- if (err)
- printk(" (incorrect)");
- printk("\n");
- }
-
- pi_disconnect(dev->pi);
- return err;
-}
-
-static void xs(char *buf, char *targ, int len)
-{
- char l = '\0';
- int k;
-
- for (k = 0; k < len; k++) {
- char c = *buf++;
- if (c != ' ' && c != l)
- l = *targ++ = c;
- }
- if (l == ' ')
- targ--;
- *targ = '\0';
-}
-
-static int pg_identify(struct pg *dev, int log)
-{
- int s;
- char *ms[2] = { "master", "slave" };
- char mf[10], id[18];
- char id_cmd[12] = { ATAPI_IDENTIFY, 0, 0, 0, 36, 0, 0, 0, 0, 0, 0, 0 };
- char buf[36];
-
- s = pg_command(dev, id_cmd, 36, jiffies + PG_TMO);
- if (s)
- return -1;
- s = pg_completion(dev, buf, jiffies + PG_TMO);
- if (s)
- return -1;
-
- if (log) {
- xs(buf + 8, mf, 8);
- xs(buf + 16, id, 16);
- printk("%s: %s %s, %s\n", dev->name, mf, id, ms[dev->drive]);
- }
-
- return 0;
-}
-
-/*
- * returns 0, with id set if drive is detected
- * -1, if drive detection failed
- */
-static int pg_probe(struct pg *dev)
-{
- if (dev->drive == -1) {
- for (dev->drive = 0; dev->drive <= 1; dev->drive++)
- if (!pg_reset(dev))
- return pg_identify(dev, 1);
- } else {
- if (!pg_reset(dev))
- return pg_identify(dev, 1);
- }
- return -1;
-}
-
-static int pg_detect(void)
-{
- struct pg *dev = &devices[0];
- int k, unit;
-
- printk("%s: %s version %s, major %d\n", name, name, PG_VERSION, major);
-
- par_drv = pi_register_driver(name);
- if (!par_drv) {
- pr_err("failed to register %s driver\n", name);
- return -1;
- }
-
- k = 0;
- if (pg_drive_count == 0) {
- if (pi_init(dev->pi, 1, -1, -1, -1, -1, -1, pg_scratch,
- PI_PG, verbose, dev->name)) {
- if (!pg_probe(dev)) {
- dev->present = 1;
- k++;
- } else
- pi_release(dev->pi);
- }
-
- } else
- for (unit = 0; unit < PG_UNITS; unit++, dev++) {
- int *parm = *drives[unit];
- if (!parm[D_PRT])
- continue;
- if (pi_init(dev->pi, 0, parm[D_PRT], parm[D_MOD],
- parm[D_UNI], parm[D_PRO], parm[D_DLY],
- pg_scratch, PI_PG, verbose, dev->name)) {
- if (!pg_probe(dev)) {
- dev->present = 1;
- k++;
- } else
- pi_release(dev->pi);
- }
- }
-
- if (k)
- return 0;
-
- pi_unregister_driver(par_drv);
- printk("%s: No ATAPI device detected\n", name);
- return -1;
-}
-
-static int pg_open(struct inode *inode, struct file *file)
-{
- int unit = iminor(inode) & 0x7f;
- struct pg *dev = &devices[unit];
- int ret = 0;
-
- mutex_lock(&pg_mutex);
- if ((unit >= PG_UNITS) || (!dev->present)) {
- ret = -ENODEV;
- goto out;
- }
-
- if (test_and_set_bit(0, &dev->access)) {
- ret = -EBUSY;
- goto out;
- }
-
- if (dev->busy) {
- pg_reset(dev);
- dev->busy = 0;
- }
-
- pg_identify(dev, (verbose > 1));
-
- dev->bufptr = kmalloc(PG_MAX_DATA, GFP_KERNEL);
- if (dev->bufptr == NULL) {
- clear_bit(0, &dev->access);
- printk("%s: buffer allocation failed\n", dev->name);
- ret = -ENOMEM;
- goto out;
- }
-
- file->private_data = dev;
-
-out:
- mutex_unlock(&pg_mutex);
- return ret;
-}
-
-static int pg_release(struct inode *inode, struct file *file)
-{
- struct pg *dev = file->private_data;
-
- kfree(dev->bufptr);
- dev->bufptr = NULL;
- clear_bit(0, &dev->access);
-
- return 0;
-}
-
-static ssize_t pg_write(struct file *filp, const char __user *buf, size_t count, loff_t *ppos)
-{
- struct pg *dev = filp->private_data;
- struct pg_write_hdr hdr;
- int hs = sizeof (hdr);
-
- if (dev->busy)
- return -EBUSY;
- if (count < hs)
- return -EINVAL;
-
- if (copy_from_user(&hdr, buf, hs))
- return -EFAULT;
-
- if (hdr.magic != PG_MAGIC)
- return -EINVAL;
- if (hdr.dlen < 0 || hdr.dlen > PG_MAX_DATA)
- return -EINVAL;
- if ((count - hs) > PG_MAX_DATA)
- return -EINVAL;
-
- if (hdr.func == PG_RESET) {
- if (count != hs)
- return -EINVAL;
- if (pg_reset(dev))
- return -EIO;
- return count;
- }
-
- if (hdr.func != PG_COMMAND)
- return -EINVAL;
-
- dev->start = jiffies;
- dev->timeout = hdr.timeout * HZ + HZ / 2 + jiffies;
-
- if (pg_command(dev, hdr.packet, hdr.dlen, jiffies + PG_TMO)) {
- if (dev->status & 0x10)
- return -ETIME;
- return -EIO;
- }
-
- dev->busy = 1;
-
- if (copy_from_user(dev->bufptr, buf + hs, count - hs))
- return -EFAULT;
- return count;
-}
-
-static ssize_t pg_read(struct file *filp, char __user *buf, size_t count, loff_t *ppos)
-{
- struct pg *dev = filp->private_data;
- struct pg_read_hdr hdr;
- int hs = sizeof (hdr);
- int copy;
-
- if (!dev->busy)
- return -EINVAL;
- if (count < hs)
- return -EINVAL;
-
- dev->busy = 0;
-
- if (pg_completion(dev, dev->bufptr, dev->timeout))
- if (dev->status & 0x10)
- return -ETIME;
-
- memset(&hdr, 0, sizeof(hdr));
- hdr.magic = PG_MAGIC;
- hdr.dlen = dev->dlen;
- copy = 0;
-
- if (hdr.dlen < 0) {
- hdr.dlen = -1 * hdr.dlen;
- copy = hdr.dlen;
- if (copy > (count - hs))
- copy = count - hs;
- }
-
- hdr.duration = (jiffies - dev->start + HZ / 2) / HZ;
- hdr.scsi = dev->status & 0x0f;
-
- if (copy_to_user(buf, &hdr, hs))
- return -EFAULT;
- if (copy > 0)
- if (copy_to_user(buf + hs, dev->bufptr, copy))
- return -EFAULT;
- return copy + hs;
-}
-
-static int __init pg_init(void)
-{
- int unit;
- int err;
-
- if (disable){
- err = -EINVAL;
- goto out;
- }
-
- pg_init_units();
-
- if (pg_detect()) {
- err = -ENODEV;
- goto out;
- }
-
- err = register_chrdev(major, name, &pg_fops);
- if (err < 0) {
- printk("pg_init: unable to get major number %d\n", major);
- for (unit = 0; unit < PG_UNITS; unit++) {
- struct pg *dev = &devices[unit];
- if (dev->present)
- pi_release(dev->pi);
- }
- goto out;
- }
- major = err; /* In case the user specified `major=0' (dynamic) */
- pg_class = class_create(THIS_MODULE, "pg");
- if (IS_ERR(pg_class)) {
- err = PTR_ERR(pg_class);
- goto out_chrdev;
- }
- for (unit = 0; unit < PG_UNITS; unit++) {
- struct pg *dev = &devices[unit];
- if (dev->present)
- device_create(pg_class, NULL, MKDEV(major, unit), NULL,
- "pg%u", unit);
- }
- err = 0;
- goto out;
-
-out_chrdev:
- unregister_chrdev(major, "pg");
-out:
- return err;
-}
-
-static void __exit pg_exit(void)
-{
- int unit;
-
- for (unit = 0; unit < PG_UNITS; unit++) {
- struct pg *dev = &devices[unit];
- if (dev->present)
- device_destroy(pg_class, MKDEV(major, unit));
- }
- class_destroy(pg_class);
- unregister_chrdev(major, name);
-
- for (unit = 0; unit < PG_UNITS; unit++) {
- struct pg *dev = &devices[unit];
- if (dev->present)
- pi_release(dev->pi);
- }
-}
-
-MODULE_LICENSE("GPL");
-module_init(pg_init)
-module_exit(pg_exit)
diff --git a/drivers/block/paride/ppc6lnx.c b/drivers/block/paride/ppc6lnx.c
deleted file mode 100644
index 5e5521d3b1dd..000000000000
--- a/drivers/block/paride/ppc6lnx.c
+++ /dev/null
@@ -1,726 +0,0 @@
-/*
- ppc6lnx.c (c) 2001 Micro Solutions Inc.
- Released under the terms of the GNU General Public license
-
- ppc6lnx.c is a par of the protocol driver for the Micro Solutions
- "BACKPACK" parallel port IDE adapter
- (Works on Series 6 drives)
-
-*/
-
-//***************************************************************************
-
-// PPC 6 Code in C sanitized for LINUX
-// Original x86 ASM by Ron, Converted to C by Clive
-
-//***************************************************************************
-
-
-#define port_stb 1
-#define port_afd 2
-#define cmd_stb port_afd
-#define port_init 4
-#define data_stb port_init
-#define port_sel 8
-#define port_int 16
-#define port_dir 0x20
-
-#define ECR_EPP 0x80
-#define ECR_BI 0x20
-
-//***************************************************************************
-
-// 60772 Commands
-
-#define ACCESS_REG 0x00
-#define ACCESS_PORT 0x40
-
-#define ACCESS_READ 0x00
-#define ACCESS_WRITE 0x20
-
-// 60772 Command Prefix
-
-#define CMD_PREFIX_SET 0xe0 // Special command that modifies the next command's operation
-#define CMD_PREFIX_RESET 0xc0 // Resets current cmd modifier reg bits
- #define PREFIX_IO16 0x01 // perform 16-bit wide I/O
- #define PREFIX_FASTWR 0x04 // enable PPC mode fast-write
- #define PREFIX_BLK 0x08 // enable block transfer mode
-
-// 60772 Registers
-
-#define REG_STATUS 0x00 // status register
- #define STATUS_IRQA 0x01 // Peripheral IRQA line
- #define STATUS_EEPROM_DO 0x40 // Serial EEPROM data bit
-#define REG_VERSION 0x01 // PPC version register (read)
-#define REG_HWCFG 0x02 // Hardware Config register
-#define REG_RAMSIZE 0x03 // Size of RAM Buffer
- #define RAMSIZE_128K 0x02
-#define REG_EEPROM 0x06 // EEPROM control register
- #define EEPROM_SK 0x01 // eeprom SK bit
- #define EEPROM_DI 0x02 // eeprom DI bit
- #define EEPROM_CS 0x04 // eeprom CS bit
- #define EEPROM_EN 0x08 // eeprom output enable
-#define REG_BLKSIZE 0x08 // Block transfer len (24 bit)
-
-//***************************************************************************
-
-typedef struct ppc_storage {
- u16 lpt_addr; // LPT base address
- u8 ppc_id;
- u8 mode; // operating mode
- // 0 = PPC Uni SW
- // 1 = PPC Uni FW
- // 2 = PPC Bi SW
- // 3 = PPC Bi FW
- // 4 = EPP Byte
- // 5 = EPP Word
- // 6 = EPP Dword
- u8 ppc_flags;
- u8 org_data; // original LPT data port contents
- u8 org_ctrl; // original LPT control port contents
- u8 cur_ctrl; // current control port contents
-} Interface;
-
-//***************************************************************************
-
-// ppc_flags
-
-#define fifo_wait 0x10
-
-//***************************************************************************
-
-// DONT CHANGE THESE LEST YOU BREAK EVERYTHING - BIT FIELD DEPENDENCIES
-
-#define PPCMODE_UNI_SW 0
-#define PPCMODE_UNI_FW 1
-#define PPCMODE_BI_SW 2
-#define PPCMODE_BI_FW 3
-#define PPCMODE_EPP_BYTE 4
-#define PPCMODE_EPP_WORD 5
-#define PPCMODE_EPP_DWORD 6
-
-//***************************************************************************
-
-static int ppc6_select(Interface *ppc);
-static void ppc6_deselect(Interface *ppc);
-static void ppc6_send_cmd(Interface *ppc, u8 cmd);
-static void ppc6_wr_data_byte(Interface *ppc, u8 data);
-static u8 ppc6_rd_data_byte(Interface *ppc);
-static u8 ppc6_rd_port(Interface *ppc, u8 port);
-static void ppc6_wr_port(Interface *ppc, u8 port, u8 data);
-static void ppc6_rd_data_blk(Interface *ppc, u8 *data, long count);
-static void ppc6_wait_for_fifo(Interface *ppc);
-static void ppc6_wr_data_blk(Interface *ppc, u8 *data, long count);
-static void ppc6_rd_port16_blk(Interface *ppc, u8 port, u8 *data, long length);
-static void ppc6_wr_port16_blk(Interface *ppc, u8 port, u8 *data, long length);
-static void ppc6_wr_extout(Interface *ppc, u8 regdata);
-static int ppc6_open(Interface *ppc);
-static void ppc6_close(Interface *ppc);
-
-//***************************************************************************
-
-static int ppc6_select(Interface *ppc)
-{
- u8 i, j, k;
-
- i = inb(ppc->lpt_addr + 1);
-
- if (i & 1)
- outb(i, ppc->lpt_addr + 1);
-
- ppc->org_data = inb(ppc->lpt_addr);
-
- ppc->org_ctrl = inb(ppc->lpt_addr + 2) & 0x5F; // readback ctrl
-
- ppc->cur_ctrl = ppc->org_ctrl;
-
- ppc->cur_ctrl |= port_sel;
-
- outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
-
- if (ppc->org_data == 'b')
- outb('x', ppc->lpt_addr);
-
- outb('b', ppc->lpt_addr);
- outb('p', ppc->lpt_addr);
- outb(ppc->ppc_id, ppc->lpt_addr);
- outb(~ppc->ppc_id,ppc->lpt_addr);
-
- ppc->cur_ctrl &= ~port_sel;
-
- outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
-
- ppc->cur_ctrl = (ppc->cur_ctrl & port_int) | port_init;
-
- outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
-
- i = ppc->mode & 0x0C;
-
- if (i == 0)
- i = (ppc->mode & 2) | 1;
-
- outb(i, ppc->lpt_addr);
-
- ppc->cur_ctrl |= port_sel;
-
- outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
-
- // DELAY
-
- ppc->cur_ctrl |= port_afd;
-
- outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
-
- j = ((i & 0x08) << 4) | ((i & 0x07) << 3);
-
- k = inb(ppc->lpt_addr + 1) & 0xB8;
-
- if (j == k)
- {
- ppc->cur_ctrl &= ~port_afd;
-
- outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
-
- k = (inb(ppc->lpt_addr + 1) & 0xB8) ^ 0xB8;
-
- if (j == k)
- {
- if (i & 4) // EPP
- ppc->cur_ctrl &= ~(port_sel | port_init);
- else // PPC/ECP
- ppc->cur_ctrl &= ~port_sel;
-
- outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
-
- return(1);
- }
- }
-
- outb(ppc->org_ctrl, ppc->lpt_addr + 2);
-
- outb(ppc->org_data, ppc->lpt_addr);
-
- return(0); // FAIL
-}
-
-//***************************************************************************
-
-static void ppc6_deselect(Interface *ppc)
-{
- if (ppc->mode & 4) // EPP
- ppc->cur_ctrl |= port_init;
- else // PPC/ECP
- ppc->cur_ctrl |= port_sel;
-
- outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
-
- outb(ppc->org_data, ppc->lpt_addr);
-
- outb((ppc->org_ctrl | port_sel), ppc->lpt_addr + 2);
-
- outb(ppc->org_ctrl, ppc->lpt_addr + 2);
-}
-
-//***************************************************************************
-
-static void ppc6_send_cmd(Interface *ppc, u8 cmd)
-{
- switch(ppc->mode)
- {
- case PPCMODE_UNI_SW :
- case PPCMODE_UNI_FW :
- case PPCMODE_BI_SW :
- case PPCMODE_BI_FW :
- {
- outb(cmd, ppc->lpt_addr);
-
- ppc->cur_ctrl ^= cmd_stb;
-
- outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
-
- break;
- }
-
- case PPCMODE_EPP_BYTE :
- case PPCMODE_EPP_WORD :
- case PPCMODE_EPP_DWORD :
- {
- outb(cmd, ppc->lpt_addr + 3);
-
- break;
- }
- }
-}
-
-//***************************************************************************
-
-static void ppc6_wr_data_byte(Interface *ppc, u8 data)
-{
- switch(ppc->mode)
- {
- case PPCMODE_UNI_SW :
- case PPCMODE_UNI_FW :
- case PPCMODE_BI_SW :
- case PPCMODE_BI_FW :
- {
- outb(data, ppc->lpt_addr);
-
- ppc->cur_ctrl ^= data_stb;
-
- outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
-
- break;
- }
-
- case PPCMODE_EPP_BYTE :
- case PPCMODE_EPP_WORD :
- case PPCMODE_EPP_DWORD :
- {
- outb(data, ppc->lpt_addr + 4);
-
- break;
- }
- }
-}
-
-//***************************************************************************
-
-static u8 ppc6_rd_data_byte(Interface *ppc)
-{
- u8 data = 0;
-
- switch(ppc->mode)
- {
- case PPCMODE_UNI_SW :
- case PPCMODE_UNI_FW :
- {
- ppc->cur_ctrl = (ppc->cur_ctrl & ~port_stb) ^ data_stb;
-
- outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
-
- // DELAY
-
- data = inb(ppc->lpt_addr + 1);
-
- data = ((data & 0x80) >> 1) | ((data & 0x38) >> 3);
-
- ppc->cur_ctrl |= port_stb;
-
- outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
-
- // DELAY
-
- data |= inb(ppc->lpt_addr + 1) & 0xB8;
-
- break;
- }
-
- case PPCMODE_BI_SW :
- case PPCMODE_BI_FW :
- {
- ppc->cur_ctrl |= port_dir;
-
- outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
-
- ppc->cur_ctrl = (ppc->cur_ctrl | port_stb) ^ data_stb;
-
- outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
-
- data = inb(ppc->lpt_addr);
-
- ppc->cur_ctrl &= ~port_stb;
-
- outb(ppc->cur_ctrl,ppc->lpt_addr + 2);
-
- ppc->cur_ctrl &= ~port_dir;
-
- outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
-
- break;
- }
-
- case PPCMODE_EPP_BYTE :
- case PPCMODE_EPP_WORD :
- case PPCMODE_EPP_DWORD :
- {
- outb((ppc->cur_ctrl | port_dir),ppc->lpt_addr + 2);
-
- data = inb(ppc->lpt_addr + 4);
-
- outb(ppc->cur_ctrl,ppc->lpt_addr + 2);
-
- break;
- }
- }
-
- return(data);
-}
-
-//***************************************************************************
-
-static u8 ppc6_rd_port(Interface *ppc, u8 port)
-{
- ppc6_send_cmd(ppc,(u8)(port | ACCESS_PORT | ACCESS_READ));
-
- return(ppc6_rd_data_byte(ppc));
-}
-
-//***************************************************************************
-
-static void ppc6_wr_port(Interface *ppc, u8 port, u8 data)
-{
- ppc6_send_cmd(ppc,(u8)(port | ACCESS_PORT | ACCESS_WRITE));
-
- ppc6_wr_data_byte(ppc, data);
-}
-
-//***************************************************************************
-
-static void ppc6_rd_data_blk(Interface *ppc, u8 *data, long count)
-{
- switch(ppc->mode)
- {
- case PPCMODE_UNI_SW :
- case PPCMODE_UNI_FW :
- {
- while(count)
- {
- u8 d;
-
- ppc->cur_ctrl = (ppc->cur_ctrl & ~port_stb) ^ data_stb;
-
- outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
-
- // DELAY
-
- d = inb(ppc->lpt_addr + 1);
-
- d = ((d & 0x80) >> 1) | ((d & 0x38) >> 3);
-
- ppc->cur_ctrl |= port_stb;
-
- outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
-
- // DELAY
-
- d |= inb(ppc->lpt_addr + 1) & 0xB8;
-
- *data++ = d;
- count--;
- }
-
- break;
- }
-
- case PPCMODE_BI_SW :
- case PPCMODE_BI_FW :
- {
- ppc->cur_ctrl |= port_dir;
-
- outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
-
- ppc->cur_ctrl |= port_stb;
-
- while(count)
- {
- ppc->cur_ctrl ^= data_stb;
-
- outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
-
- *data++ = inb(ppc->lpt_addr);
- count--;
- }
-
- ppc->cur_ctrl &= ~port_stb;
-
- outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
-
- ppc->cur_ctrl &= ~port_dir;
-
- outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
-
- break;
- }
-
- case PPCMODE_EPP_BYTE :
- {
- outb((ppc->cur_ctrl | port_dir), ppc->lpt_addr + 2);
-
- // DELAY
-
- while(count)
- {
- *data++ = inb(ppc->lpt_addr + 4);
- count--;
- }
-
- outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
-
- break;
- }
-
- case PPCMODE_EPP_WORD :
- {
- outb((ppc->cur_ctrl | port_dir), ppc->lpt_addr + 2);
-
- // DELAY
-
- while(count > 1)
- {
- *((u16 *)data) = inw(ppc->lpt_addr + 4);
- data += 2;
- count -= 2;
- }
-
- while(count)
- {
- *data++ = inb(ppc->lpt_addr + 4);
- count--;
- }
-
- outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
-
- break;
- }
-
- case PPCMODE_EPP_DWORD :
- {
- outb((ppc->cur_ctrl | port_dir),ppc->lpt_addr + 2);
-
- // DELAY
-
- while(count > 3)
- {
- *((u32 *)data) = inl(ppc->lpt_addr + 4);
- data += 4;
- count -= 4;
- }
-
- while(count)
- {
- *data++ = inb(ppc->lpt_addr + 4);
- count--;
- }
-
- outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
-
- break;
- }
- }
-
-}
-
-//***************************************************************************
-
-static void ppc6_wait_for_fifo(Interface *ppc)
-{
- int i;
-
- if (ppc->ppc_flags & fifo_wait)
- {
- for(i=0; i<20; i++)
- inb(ppc->lpt_addr + 1);
- }
-}
-
-//***************************************************************************
-
-static void ppc6_wr_data_blk(Interface *ppc, u8 *data, long count)
-{
- switch(ppc->mode)
- {
- case PPCMODE_UNI_SW :
- case PPCMODE_BI_SW :
- {
- while(count--)
- {
- outb(*data++, ppc->lpt_addr);
-
- ppc->cur_ctrl ^= data_stb;
-
- outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
- }
-
- break;
- }
-
- case PPCMODE_UNI_FW :
- case PPCMODE_BI_FW :
- {
- u8 this, last;
-
- ppc6_send_cmd(ppc,(CMD_PREFIX_SET | PREFIX_FASTWR));
-
- ppc->cur_ctrl |= port_stb;
-
- outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
-
- last = *data;
-
- outb(last, ppc->lpt_addr);
-
- while(count)
- {
- this = *data++;
- count--;
-
- if (this == last)
- {
- ppc->cur_ctrl ^= data_stb;
-
- outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
- }
- else
- {
- outb(this, ppc->lpt_addr);
-
- last = this;
- }
- }
-
- ppc->cur_ctrl &= ~port_stb;
-
- outb(ppc->cur_ctrl, ppc->lpt_addr + 2);
-
- ppc6_send_cmd(ppc,(CMD_PREFIX_RESET | PREFIX_FASTWR));
-
- break;
- }
-
- case PPCMODE_EPP_BYTE :
- {
- while(count)
- {
- outb(*data++,ppc->lpt_addr + 4);
- count--;
- }
-
- ppc6_wait_for_fifo(ppc);
-
- break;
- }
-
- case PPCMODE_EPP_WORD :
- {
- while(count > 1)
- {
- outw(*((u16 *)data),ppc->lpt_addr + 4);
- data += 2;
- count -= 2;
- }
-
- while(count)
- {
- outb(*data++,ppc->lpt_addr + 4);
- count--;
- }
-
- ppc6_wait_for_fifo(ppc);
-
- break;
- }
-
- case PPCMODE_EPP_DWORD :
- {
- while(count > 3)
- {
- outl(*((u32 *)data),ppc->lpt_addr + 4);
- data += 4;
- count -= 4;
- }
-
- while(count)
- {
- outb(*data++,ppc->lpt_addr + 4);
- count--;
- }
-
- ppc6_wait_for_fifo(ppc);
-
- break;
- }
- }
-}
-
-//***************************************************************************
-
-static void ppc6_rd_port16_blk(Interface *ppc, u8 port, u8 *data, long length)
-{
- length = length << 1;
-
- ppc6_send_cmd(ppc, (REG_BLKSIZE | ACCESS_REG | ACCESS_WRITE));
- ppc6_wr_data_byte(ppc,(u8)length);
- ppc6_wr_data_byte(ppc,(u8)(length >> 8));
- ppc6_wr_data_byte(ppc,0);
-
- ppc6_send_cmd(ppc, (CMD_PREFIX_SET | PREFIX_IO16 | PREFIX_BLK));
-
- ppc6_send_cmd(ppc, (u8)(port | ACCESS_PORT | ACCESS_READ));
-
- ppc6_rd_data_blk(ppc, data, length);
-
- ppc6_send_cmd(ppc, (CMD_PREFIX_RESET | PREFIX_IO16 | PREFIX_BLK));
-}
-
-//***************************************************************************
-
-static void ppc6_wr_port16_blk(Interface *ppc, u8 port, u8 *data, long length)
-{
- length = length << 1;
-
- ppc6_send_cmd(ppc, (REG_BLKSIZE | ACCESS_REG | ACCESS_WRITE));
- ppc6_wr_data_byte(ppc,(u8)length);
- ppc6_wr_data_byte(ppc,(u8)(length >> 8));
- ppc6_wr_data_byte(ppc,0);
-
- ppc6_send_cmd(ppc, (CMD_PREFIX_SET | PREFIX_IO16 | PREFIX_BLK));
-
- ppc6_send_cmd(ppc, (u8)(port | ACCESS_PORT | ACCESS_WRITE));
-
- ppc6_wr_data_blk(ppc, data, length);
-
- ppc6_send_cmd(ppc, (CMD_PREFIX_RESET | PREFIX_IO16 | PREFIX_BLK));
-}
-
-//***************************************************************************
-
-static void ppc6_wr_extout(Interface *ppc, u8 regdata)
-{
- ppc6_send_cmd(ppc,(REG_VERSION | ACCESS_REG | ACCESS_WRITE));
-
- ppc6_wr_data_byte(ppc, (u8)((regdata & 0x03) << 6));
-}
-
-//***************************************************************************
-
-static int ppc6_open(Interface *ppc)
-{
- int ret;
-
- ret = ppc6_select(ppc);
-
- if (ret == 0)
- return(ret);
-
- ppc->ppc_flags &= ~fifo_wait;
-
- ppc6_send_cmd(ppc, (ACCESS_REG | ACCESS_WRITE | REG_RAMSIZE));
- ppc6_wr_data_byte(ppc, RAMSIZE_128K);
-
- ppc6_send_cmd(ppc, (ACCESS_REG | ACCESS_READ | REG_VERSION));
-
- if ((ppc6_rd_data_byte(ppc) & 0x3F) == 0x0C)
- ppc->ppc_flags |= fifo_wait;
-
- return(ret);
-}
-
-//***************************************************************************
-
-static void ppc6_close(Interface *ppc)
-{
- ppc6_deselect(ppc);
-}
-
-//***************************************************************************
-
diff --git a/drivers/block/paride/pseudo.h b/drivers/block/paride/pseudo.h
deleted file mode 100644
index bc3703294143..000000000000
--- a/drivers/block/paride/pseudo.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- pseudo.h (c) 1997-8 Grant R. Guenther <grant@xxxxxxxxxx>
- Under the terms of the GNU General Public License.
-
- This is the "pseudo-interrupt" logic for parallel port drivers.
-
- This module is #included into each driver. It makes one
- function available:
-
- ps_set_intr( void (*continuation)(void),
- int (*ready)(void),
- int timeout,
- int nice )
-
- Which will arrange for ready() to be evaluated frequently and
- when either it returns true, or timeout jiffies have passed,
- continuation() will be invoked.
-
- If nice is 1, the test will done approximately once a
- jiffy. If nice is 0, the test will also be done whenever
- the scheduler runs (by adding it to a task queue). If
- nice is greater than 1, the test will be done once every
- (nice-1) jiffies.
-
-*/
-
-/* Changes:
-
- 1.01 1998.05.03 Switched from cli()/sti() to spinlocks
- 1.02 1998.12.14 Added support for nice > 1
-*/
-
-#define PS_VERSION "1.02"
-
-#include <linux/sched.h>
-#include <linux/workqueue.h>
-
-static void ps_tq_int(struct work_struct *work);
-
-static void (* ps_continuation)(void);
-static int (* ps_ready)(void);
-static unsigned long ps_timeout;
-static int ps_tq_active = 0;
-static int ps_nice = 0;
-
-static DEFINE_SPINLOCK(ps_spinlock __attribute__((unused)));
-
-static DECLARE_DELAYED_WORK(ps_tq, ps_tq_int);
-
-static void ps_set_intr(void (*continuation)(void),
- int (*ready)(void),
- int timeout, int nice)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&ps_spinlock,flags);
-
- ps_continuation = continuation;
- ps_ready = ready;
- ps_timeout = jiffies + timeout;
- ps_nice = nice;
-
- if (!ps_tq_active) {
- ps_tq_active = 1;
- if (!ps_nice)
- schedule_delayed_work(&ps_tq, 0);
- else
- schedule_delayed_work(&ps_tq, ps_nice-1);
- }
- spin_unlock_irqrestore(&ps_spinlock,flags);
-}
-
-static void ps_tq_int(struct work_struct *work)
-{
- void (*con)(void);
- unsigned long flags;
-
- spin_lock_irqsave(&ps_spinlock,flags);
-
- con = ps_continuation;
- ps_tq_active = 0;
-
- if (!con) {
- spin_unlock_irqrestore(&ps_spinlock,flags);
- return;
- }
- if (!ps_ready || ps_ready() || time_after_eq(jiffies, ps_timeout)) {
- ps_continuation = NULL;
- spin_unlock_irqrestore(&ps_spinlock,flags);
- con();
- return;
- }
- ps_tq_active = 1;
- if (!ps_nice)
- schedule_delayed_work(&ps_tq, 0);
- else
- schedule_delayed_work(&ps_tq, ps_nice-1);
- spin_unlock_irqrestore(&ps_spinlock,flags);
-}
-
-/* end of pseudo.h */
-
diff --git a/drivers/block/paride/pt.c b/drivers/block/paride/pt.c
deleted file mode 100644
index e815312a00ad..000000000000
--- a/drivers/block/paride/pt.c
+++ /dev/null
@@ -1,1024 +0,0 @@
-/*
- pt.c (c) 1998 Grant R. Guenther <grant@xxxxxxxxxx>
- Under the terms of the GNU General Public License.
-
- This is the high-level driver for parallel port ATAPI tape
- drives based on chips supported by the paride module.
-
- The driver implements both rewinding and non-rewinding
- devices, filemarks, and the rewind ioctl. It allocates
- a small internal "bounce buffer" for each open device, but
- otherwise expects buffering and blocking to be done at the
- user level. As with most block-structured tapes, short
- writes are padded to full tape blocks, so reading back a file
- may return more data than was actually written.
-
- By default, the driver will autoprobe for a single parallel
- port ATAPI tape drive, but if their individual parameters are
- specified, the driver can handle up to 4 drives.
-
- The rewinding devices are named /dev/pt0, /dev/pt1, ...
- while the non-rewinding devices are /dev/npt0, /dev/npt1, etc.
-
- The behaviour of the pt driver can be altered by setting
- some parameters from the insmod command line. The following
- parameters are adjustable:
-
- drive0 These four arguments can be arrays of
- drive1 1-6 integers as follows:
- drive2
- drive3 <prt>,<pro>,<uni>,<mod>,<slv>,<dly>
-
- Where,
-
- <prt> is the base of the parallel port address for
- the corresponding drive. (required)
-
- <pro> is the protocol number for the adapter that
- supports this drive. These numbers are
- logged by 'paride' when the protocol modules
- are initialised. (0 if not given)
-
- <uni> for those adapters that support chained
- devices, this is the unit selector for the
- chain of devices on the given port. It should
- be zero for devices that don't support chaining.
- (0 if not given)
-
- <mod> this can be -1 to choose the best mode, or one
- of the mode numbers supported by the adapter.
- (-1 if not given)
-
- <slv> ATAPI devices can be jumpered to master or slave.
- Set this to 0 to choose the master drive, 1 to
- choose the slave, -1 (the default) to choose the
- first drive found.
-
- <dly> some parallel ports require the driver to
- go more slowly. -1 sets a default value that
- should work with the chosen protocol. Otherwise,
- set this to a small integer, the larger it is
- the slower the port i/o. In some cases, setting
- this to zero will speed up the device. (default -1)
-
- major You may use this parameter to override the
- default major number (96) that this driver
- will use. Be sure to change the device
- name as well.
-
- name This parameter is a character string that
- contains the name the kernel will use for this
- device (in /proc output, for instance).
- (default "pt").
-
- verbose This parameter controls the amount of logging
- that the driver will do. Set it to 0 for
- normal operation, 1 to see autoprobe progress
- messages, or 2 to see additional debugging
- output. (default 0)
-
- If this driver is built into the kernel, you can use
- the following command line parameters, with the same values
- as the corresponding module parameters listed above:
-
- pt.drive0
- pt.drive1
- pt.drive2
- pt.drive3
-
- In addition, you can use the parameter pt.disable to disable
- the driver entirely.
-
-*/
-
-/* Changes:
-
- 1.01 GRG 1998.05.06 Round up transfer size, fix ready_wait,
- loosed interpretation of ATAPI standard
- for clearing error status.
- Eliminate sti();
- 1.02 GRG 1998.06.16 Eliminate an Ugh.
- 1.03 GRG 1998.08.15 Adjusted PT_TMO, use HZ in loop timing,
- extra debugging
- 1.04 GRG 1998.09.24 Repair minor coding error, added jumbo support
-
-*/
-
-#define PT_VERSION "1.04"
-#define PT_MAJOR 96
-#define PT_NAME "pt"
-#define PT_UNITS 4
-
-#include <linux/types.h>
-
-/* Here are things one can override from the insmod command.
- Most are autoprobed by paride unless set here. Verbose is on
- by default.
-
-*/
-
-static int verbose = 0;
-static int major = PT_MAJOR;
-static char *name = PT_NAME;
-static int disable = 0;
-
-static int drive0[6] = { 0, 0, 0, -1, -1, -1 };
-static int drive1[6] = { 0, 0, 0, -1, -1, -1 };
-static int drive2[6] = { 0, 0, 0, -1, -1, -1 };
-static int drive3[6] = { 0, 0, 0, -1, -1, -1 };
-
-static int (*drives[4])[6] = {&drive0, &drive1, &drive2, &drive3};
-
-#define D_PRT 0
-#define D_PRO 1
-#define D_UNI 2
-#define D_MOD 3
-#define D_SLV 4
-#define D_DLY 5
-
-#define DU (*drives[unit])
-
-/* end of parameters */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/mtio.h>
-#include <linux/device.h>
-#include <linux/sched.h> /* current, TASK_*, schedule_timeout() */
-#include <linux/mutex.h>
-
-#include <linux/uaccess.h>
-
-module_param(verbose, int, 0);
-module_param(major, int, 0);
-module_param(name, charp, 0);
-module_param_array(drive0, int, NULL, 0);
-module_param_array(drive1, int, NULL, 0);
-module_param_array(drive2, int, NULL, 0);
-module_param_array(drive3, int, NULL, 0);
-
-#include "paride.h"
-
-#define PT_MAX_RETRIES 5
-#define PT_TMO 3000 /* interrupt timeout in jiffies */
-#define PT_SPIN_DEL 50 /* spin delay in micro-seconds */
-#define PT_RESET_TMO 30 /* 30 seconds */
-#define PT_READY_TMO 60 /* 60 seconds */
-#define PT_REWIND_TMO 1200 /* 20 minutes */
-
-#define PT_SPIN ((1000000/(HZ*PT_SPIN_DEL))*PT_TMO)
-
-#define STAT_ERR 0x00001
-#define STAT_INDEX 0x00002
-#define STAT_ECC 0x00004
-#define STAT_DRQ 0x00008
-#define STAT_SEEK 0x00010
-#define STAT_WRERR 0x00020
-#define STAT_READY 0x00040
-#define STAT_BUSY 0x00080
-#define STAT_SENSE 0x1f000
-
-#define ATAPI_TEST_READY 0x00
-#define ATAPI_REWIND 0x01
-#define ATAPI_REQ_SENSE 0x03
-#define ATAPI_READ_6 0x08
-#define ATAPI_WRITE_6 0x0a
-#define ATAPI_WFM 0x10
-#define ATAPI_IDENTIFY 0x12
-#define ATAPI_MODE_SENSE 0x1a
-#define ATAPI_LOG_SENSE 0x4d
-
-static DEFINE_MUTEX(pt_mutex);
-static int pt_open(struct inode *inode, struct file *file);
-static long pt_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
-static int pt_release(struct inode *inode, struct file *file);
-static ssize_t pt_read(struct file *filp, char __user *buf,
- size_t count, loff_t * ppos);
-static ssize_t pt_write(struct file *filp, const char __user *buf,
- size_t count, loff_t * ppos);
-static int pt_detect(void);
-
-/* bits in tape->flags */
-
-#define PT_MEDIA 1
-#define PT_WRITE_OK 2
-#define PT_REWIND 4
-#define PT_WRITING 8
-#define PT_READING 16
-#define PT_EOF 32
-
-#define PT_NAMELEN 8
-#define PT_BUFSIZE 16384
-
-struct pt_unit {
- struct pi_adapter pia; /* interface to paride layer */
- struct pi_adapter *pi;
- int flags; /* various state flags */
- int last_sense; /* result of last request sense */
- int drive; /* drive */
- atomic_t available; /* 1 if access is available 0 otherwise */
- int bs; /* block size */
- int capacity; /* Size of tape in KB */
- int present; /* device present ? */
- char *bufptr;
- char name[PT_NAMELEN]; /* pf0, pf1, ... */
-};
-
-static int pt_identify(struct pt_unit *tape);
-
-static struct pt_unit pt[PT_UNITS];
-
-static char pt_scratch[512]; /* scratch block buffer */
-static void *par_drv; /* reference of parport driver */
-
-/* kernel glue structures */
-
-static const struct file_operations pt_fops = {
- .owner = THIS_MODULE,
- .read = pt_read,
- .write = pt_write,
- .unlocked_ioctl = pt_ioctl,
- .open = pt_open,
- .release = pt_release,
- .llseek = noop_llseek,
-};
-
-/* sysfs class support */
-static struct class *pt_class;
-
-static inline int status_reg(struct pi_adapter *pi)
-{
- return pi_read_regr(pi, 1, 6);
-}
-
-static inline int read_reg(struct pi_adapter *pi, int reg)
-{
- return pi_read_regr(pi, 0, reg);
-}
-
-static inline void write_reg(struct pi_adapter *pi, int reg, int val)
-{
- pi_write_regr(pi, 0, reg, val);
-}
-
-static inline u8 DRIVE(struct pt_unit *tape)
-{
- return 0xa0+0x10*tape->drive;
-}
-
-static int pt_wait(struct pt_unit *tape, int go, int stop, char *fun, char *msg)
-{
- int j, r, e, s, p;
- struct pi_adapter *pi = tape->pi;
-
- j = 0;
- while ((((r = status_reg(pi)) & go) || (stop && (!(r & stop))))
- && (j++ < PT_SPIN))
- udelay(PT_SPIN_DEL);
-
- if ((r & (STAT_ERR & stop)) || (j > PT_SPIN)) {
- s = read_reg(pi, 7);
- e = read_reg(pi, 1);
- p = read_reg(pi, 2);
- if (j > PT_SPIN)
- e |= 0x100;
- if (fun)
- printk("%s: %s %s: alt=0x%x stat=0x%x err=0x%x"
- " loop=%d phase=%d\n",
- tape->name, fun, msg, r, s, e, j, p);
- return (e << 8) + s;
- }
- return 0;
-}
-
-static int pt_command(struct pt_unit *tape, char *cmd, int dlen, char *fun)
-{
- struct pi_adapter *pi = tape->pi;
- pi_connect(pi);
-
- write_reg(pi, 6, DRIVE(tape));
-
- if (pt_wait(tape, STAT_BUSY | STAT_DRQ, 0, fun, "before command")) {
- pi_disconnect(pi);
- return -1;
- }
-
- write_reg(pi, 4, dlen % 256);
- write_reg(pi, 5, dlen / 256);
- write_reg(pi, 7, 0xa0); /* ATAPI packet command */
-
- if (pt_wait(tape, STAT_BUSY, STAT_DRQ, fun, "command DRQ")) {
- pi_disconnect(pi);
- return -1;
- }
-
- if (read_reg(pi, 2) != 1) {
- printk("%s: %s: command phase error\n", tape->name, fun);
- pi_disconnect(pi);
- return -1;
- }
-
- pi_write_block(pi, cmd, 12);
-
- return 0;
-}
-
-static int pt_completion(struct pt_unit *tape, char *buf, char *fun)
-{
- struct pi_adapter *pi = tape->pi;
- int r, s, n, p;
-
- r = pt_wait(tape, STAT_BUSY, STAT_DRQ | STAT_READY | STAT_ERR,
- fun, "completion");
-
- if (read_reg(pi, 7) & STAT_DRQ) {
- n = (((read_reg(pi, 4) + 256 * read_reg(pi, 5)) +
- 3) & 0xfffc);
- p = read_reg(pi, 2) & 3;
- if (p == 0)
- pi_write_block(pi, buf, n);
- if (p == 2)
- pi_read_block(pi, buf, n);
- }
-
- s = pt_wait(tape, STAT_BUSY, STAT_READY | STAT_ERR, fun, "data done");
-
- pi_disconnect(pi);
-
- return (r ? r : s);
-}
-
-static void pt_req_sense(struct pt_unit *tape, int quiet)
-{
- char rs_cmd[12] = { ATAPI_REQ_SENSE, 0, 0, 0, 16, 0, 0, 0, 0, 0, 0, 0 };
- char buf[16];
- int r;
-
- r = pt_command(tape, rs_cmd, 16, "Request sense");
- mdelay(1);
- if (!r)
- pt_completion(tape, buf, "Request sense");
-
- tape->last_sense = -1;
- if (!r) {
- if (!quiet)
- printk("%s: Sense key: %x, ASC: %x, ASQ: %x\n",
- tape->name, buf[2] & 0xf, buf[12], buf[13]);
- tape->last_sense = (buf[2] & 0xf) | ((buf[12] & 0xff) << 8)
- | ((buf[13] & 0xff) << 16);
- }
-}
-
-static int pt_atapi(struct pt_unit *tape, char *cmd, int dlen, char *buf, char *fun)
-{
- int r;
-
- r = pt_command(tape, cmd, dlen, fun);
- mdelay(1);
- if (!r)
- r = pt_completion(tape, buf, fun);
- if (r)
- pt_req_sense(tape, !fun);
-
- return r;
-}
-
-static void pt_sleep(int cs)
-{
- schedule_timeout_interruptible(cs);
-}
-
-static int pt_poll_dsc(struct pt_unit *tape, int pause, int tmo, char *msg)
-{
- struct pi_adapter *pi = tape->pi;
- int k, e, s;
-
- k = 0;
- e = 0;
- s = 0;
- while (k < tmo) {
- pt_sleep(pause);
- k++;
- pi_connect(pi);
- write_reg(pi, 6, DRIVE(tape));
- s = read_reg(pi, 7);
- e = read_reg(pi, 1);
- pi_disconnect(pi);
- if (s & (STAT_ERR | STAT_SEEK))
- break;
- }
- if ((k >= tmo) || (s & STAT_ERR)) {
- if (k >= tmo)
- printk("%s: %s DSC timeout\n", tape->name, msg);
- else
- printk("%s: %s stat=0x%x err=0x%x\n", tape->name, msg, s,
- e);
- pt_req_sense(tape, 0);
- return 0;
- }
- return 1;
-}
-
-static void pt_media_access_cmd(struct pt_unit *tape, int tmo, char *cmd, char *fun)
-{
- if (pt_command(tape, cmd, 0, fun)) {
- pt_req_sense(tape, 0);
- return;
- }
- pi_disconnect(tape->pi);
- pt_poll_dsc(tape, HZ, tmo, fun);
-}
-
-static void pt_rewind(struct pt_unit *tape)
-{
- char rw_cmd[12] = { ATAPI_REWIND, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
-
- pt_media_access_cmd(tape, PT_REWIND_TMO, rw_cmd, "rewind");
-}
-
-static void pt_write_fm(struct pt_unit *tape)
-{
- char wm_cmd[12] = { ATAPI_WFM, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0 };
-
- pt_media_access_cmd(tape, PT_TMO, wm_cmd, "write filemark");
-}
-
-#define DBMSG(msg) ((verbose>1)?(msg):NULL)
-
-static int pt_reset(struct pt_unit *tape)
-{
- struct pi_adapter *pi = tape->pi;
- int i, k, flg;
- int expect[5] = { 1, 1, 1, 0x14, 0xeb };
-
- pi_connect(pi);
- write_reg(pi, 6, DRIVE(tape));
- write_reg(pi, 7, 8);
-
- pt_sleep(20 * HZ / 1000);
-
- k = 0;
- while ((k++ < PT_RESET_TMO) && (status_reg(pi) & STAT_BUSY))
- pt_sleep(HZ / 10);
-
- flg = 1;
- for (i = 0; i < 5; i++)
- flg &= (read_reg(pi, i + 1) == expect[i]);
-
- if (verbose) {
- printk("%s: Reset (%d) signature = ", tape->name, k);
- for (i = 0; i < 5; i++)
- printk("%3x", read_reg(pi, i + 1));
- if (!flg)
- printk(" (incorrect)");
- printk("\n");
- }
-
- pi_disconnect(pi);
- return flg - 1;
-}
-
-static int pt_ready_wait(struct pt_unit *tape, int tmo)
-{
- char tr_cmd[12] = { ATAPI_TEST_READY, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
- int k, p;
-
- k = 0;
- while (k < tmo) {
- tape->last_sense = 0;
- pt_atapi(tape, tr_cmd, 0, NULL, DBMSG("test unit ready"));
- p = tape->last_sense;
- if (!p)
- return 0;
- if (!(((p & 0xffff) == 0x0402) || ((p & 0xff) == 6)))
- return p;
- k++;
- pt_sleep(HZ);
- }
- return 0x000020; /* timeout */
-}
-
-static void xs(char *buf, char *targ, int offs, int len)
-{
- int j, k, l;
-
- j = 0;
- l = 0;
- for (k = 0; k < len; k++)
- if ((buf[k + offs] != 0x20) || (buf[k + offs] != l))
- l = targ[j++] = buf[k + offs];
- if (l == 0x20)
- j--;
- targ[j] = 0;
-}
-
-static int xn(char *buf, int offs, int size)
-{
- int v, k;
-
- v = 0;
- for (k = 0; k < size; k++)
- v = v * 256 + (buf[k + offs] & 0xff);
- return v;
-}
-
-static int pt_identify(struct pt_unit *tape)
-{
- int dt, s;
- char *ms[2] = { "master", "slave" };
- char mf[10], id[18];
- char id_cmd[12] = { ATAPI_IDENTIFY, 0, 0, 0, 36, 0, 0, 0, 0, 0, 0, 0 };
- char ms_cmd[12] =
- { ATAPI_MODE_SENSE, 0, 0x2a, 0, 36, 0, 0, 0, 0, 0, 0, 0 };
- char ls_cmd[12] =
- { ATAPI_LOG_SENSE, 0, 0x71, 0, 0, 0, 0, 0, 36, 0, 0, 0 };
- char buf[36];
-
- s = pt_atapi(tape, id_cmd, 36, buf, "identify");
- if (s)
- return -1;
-
- dt = buf[0] & 0x1f;
- if (dt != 1) {
- if (verbose)
- printk("%s: Drive %d, unsupported type %d\n",
- tape->name, tape->drive, dt);
- return -1;
- }
-
- xs(buf, mf, 8, 8);
- xs(buf, id, 16, 16);
-
- tape->flags = 0;
- tape->capacity = 0;
- tape->bs = 0;
-
- if (!pt_ready_wait(tape, PT_READY_TMO))
- tape->flags |= PT_MEDIA;
-
- if (!pt_atapi(tape, ms_cmd, 36, buf, "mode sense")) {
- if (!(buf[2] & 0x80))
- tape->flags |= PT_WRITE_OK;
- tape->bs = xn(buf, 10, 2);
- }
-
- if (!pt_atapi(tape, ls_cmd, 36, buf, "log sense"))
- tape->capacity = xn(buf, 24, 4);
-
- printk("%s: %s %s, %s", tape->name, mf, id, ms[tape->drive]);
- if (!(tape->flags & PT_MEDIA))
- printk(", no media\n");
- else {
- if (!(tape->flags & PT_WRITE_OK))
- printk(", RO");
- printk(", blocksize %d, %d MB\n", tape->bs, tape->capacity / 1024);
- }
-
- return 0;
-}
-
-
-/*
- * returns 0, with id set if drive is detected
- * -1, if drive detection failed
- */
-static int pt_probe(struct pt_unit *tape)
-{
- if (tape->drive == -1) {
- for (tape->drive = 0; tape->drive <= 1; tape->drive++)
- if (!pt_reset(tape))
- return pt_identify(tape);
- } else {
- if (!pt_reset(tape))
- return pt_identify(tape);
- }
- return -1;
-}
-
-static int pt_detect(void)
-{
- struct pt_unit *tape;
- int specified = 0, found = 0;
- int unit;
-
- printk("%s: %s version %s, major %d\n", name, name, PT_VERSION, major);
-
- par_drv = pi_register_driver(name);
- if (!par_drv) {
- pr_err("failed to register %s driver\n", name);
- return -1;
- }
-
- specified = 0;
- for (unit = 0; unit < PT_UNITS; unit++) {
- struct pt_unit *tape = &pt[unit];
- tape->pi = &tape->pia;
- atomic_set(&tape->available, 1);
- tape->flags = 0;
- tape->last_sense = 0;
- tape->present = 0;
- tape->bufptr = NULL;
- tape->drive = DU[D_SLV];
- snprintf(tape->name, PT_NAMELEN, "%s%d", name, unit);
- if (!DU[D_PRT])
- continue;
- specified++;
- if (pi_init(tape->pi, 0, DU[D_PRT], DU[D_MOD], DU[D_UNI],
- DU[D_PRO], DU[D_DLY], pt_scratch, PI_PT,
- verbose, tape->name)) {
- if (!pt_probe(tape)) {
- tape->present = 1;
- found++;
- } else
- pi_release(tape->pi);
- }
- }
- if (specified == 0) {
- tape = pt;
- if (pi_init(tape->pi, 1, -1, -1, -1, -1, -1, pt_scratch,
- PI_PT, verbose, tape->name)) {
- if (!pt_probe(tape)) {
- tape->present = 1;
- found++;
- } else
- pi_release(tape->pi);
- }
-
- }
- if (found)
- return 0;
-
- pi_unregister_driver(par_drv);
- printk("%s: No ATAPI tape drive detected\n", name);
- return -1;
-}
-
-static int pt_open(struct inode *inode, struct file *file)
-{
- int unit = iminor(inode) & 0x7F;
- struct pt_unit *tape = pt + unit;
- int err;
-
- mutex_lock(&pt_mutex);
- if (unit >= PT_UNITS || (!tape->present)) {
- mutex_unlock(&pt_mutex);
- return -ENODEV;
- }
-
- err = -EBUSY;
- if (!atomic_dec_and_test(&tape->available))
- goto out;
-
- pt_identify(tape);
-
- err = -ENODEV;
- if (!(tape->flags & PT_MEDIA))
- goto out;
-
- err = -EROFS;
- if ((!(tape->flags & PT_WRITE_OK)) && (file->f_mode & FMODE_WRITE))
- goto out;
-
- if (!(iminor(inode) & 128))
- tape->flags |= PT_REWIND;
-
- err = -ENOMEM;
- tape->bufptr = kmalloc(PT_BUFSIZE, GFP_KERNEL);
- if (tape->bufptr == NULL) {
- printk("%s: buffer allocation failed\n", tape->name);
- goto out;
- }
-
- file->private_data = tape;
- mutex_unlock(&pt_mutex);
- return 0;
-
-out:
- atomic_inc(&tape->available);
- mutex_unlock(&pt_mutex);
- return err;
-}
-
-static long pt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-{
- struct pt_unit *tape = file->private_data;
- struct mtop __user *p = (void __user *)arg;
- struct mtop mtop;
-
- switch (cmd) {
- case MTIOCTOP:
- if (copy_from_user(&mtop, p, sizeof(struct mtop)))
- return -EFAULT;
-
- switch (mtop.mt_op) {
-
- case MTREW:
- mutex_lock(&pt_mutex);
- pt_rewind(tape);
- mutex_unlock(&pt_mutex);
- return 0;
-
- case MTWEOF:
- mutex_lock(&pt_mutex);
- pt_write_fm(tape);
- mutex_unlock(&pt_mutex);
- return 0;
-
- default:
- /* FIXME: rate limit ?? */
- printk(KERN_DEBUG "%s: Unimplemented mt_op %d\n", tape->name,
- mtop.mt_op);
- return -EINVAL;
- }
-
- default:
- return -ENOTTY;
- }
-}
-
-static int
-pt_release(struct inode *inode, struct file *file)
-{
- struct pt_unit *tape = file->private_data;
-
- if (atomic_read(&tape->available) > 1)
- return -EINVAL;
-
- if (tape->flags & PT_WRITING)
- pt_write_fm(tape);
-
- if (tape->flags & PT_REWIND)
- pt_rewind(tape);
-
- kfree(tape->bufptr);
- tape->bufptr = NULL;
-
- atomic_inc(&tape->available);
-
- return 0;
-
-}
-
-static ssize_t pt_read(struct file *filp, char __user *buf, size_t count, loff_t * ppos)
-{
- struct pt_unit *tape = filp->private_data;
- struct pi_adapter *pi = tape->pi;
- char rd_cmd[12] = { ATAPI_READ_6, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
- int k, n, r, p, s, t, b;
-
- if (!(tape->flags & (PT_READING | PT_WRITING))) {
- tape->flags |= PT_READING;
- if (pt_atapi(tape, rd_cmd, 0, NULL, "start read-ahead"))
- return -EIO;
- } else if (tape->flags & PT_WRITING)
- return -EIO;
-
- if (tape->flags & PT_EOF)
- return 0;
-
- t = 0;
-
- while (count > 0) {
-
- if (!pt_poll_dsc(tape, HZ / 100, PT_TMO, "read"))
- return -EIO;
-
- n = count;
- if (n > 32768)
- n = 32768; /* max per command */
- b = (n - 1 + tape->bs) / tape->bs;
- n = b * tape->bs; /* rounded up to even block */
-
- rd_cmd[4] = b;
-
- r = pt_command(tape, rd_cmd, n, "read");
-
- mdelay(1);
-
- if (r) {
- pt_req_sense(tape, 0);
- return -EIO;
- }
-
- while (1) {
-
- r = pt_wait(tape, STAT_BUSY,
- STAT_DRQ | STAT_ERR | STAT_READY,
- DBMSG("read DRQ"), "");
-
- if (r & STAT_SENSE) {
- pi_disconnect(pi);
- pt_req_sense(tape, 0);
- return -EIO;
- }
-
- if (r)
- tape->flags |= PT_EOF;
-
- s = read_reg(pi, 7);
-
- if (!(s & STAT_DRQ))
- break;
-
- n = (read_reg(pi, 4) + 256 * read_reg(pi, 5));
- p = (read_reg(pi, 2) & 3);
- if (p != 2) {
- pi_disconnect(pi);
- printk("%s: Phase error on read: %d\n", tape->name,
- p);
- return -EIO;
- }
-
- while (n > 0) {
- k = n;
- if (k > PT_BUFSIZE)
- k = PT_BUFSIZE;
- pi_read_block(pi, tape->bufptr, k);
- n -= k;
- b = k;
- if (b > count)
- b = count;
- if (copy_to_user(buf + t, tape->bufptr, b)) {
- pi_disconnect(pi);
- return -EFAULT;
- }
- t += b;
- count -= b;
- }
-
- }
- pi_disconnect(pi);
- if (tape->flags & PT_EOF)
- break;
- }
-
- return t;
-
-}
-
-static ssize_t pt_write(struct file *filp, const char __user *buf, size_t count, loff_t * ppos)
-{
- struct pt_unit *tape = filp->private_data;
- struct pi_adapter *pi = tape->pi;
- char wr_cmd[12] = { ATAPI_WRITE_6, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
- int k, n, r, p, s, t, b;
-
- if (!(tape->flags & PT_WRITE_OK))
- return -EROFS;
-
- if (!(tape->flags & (PT_READING | PT_WRITING))) {
- tape->flags |= PT_WRITING;
- if (pt_atapi
- (tape, wr_cmd, 0, NULL, "start buffer-available mode"))
- return -EIO;
- } else if (tape->flags & PT_READING)
- return -EIO;
-
- if (tape->flags & PT_EOF)
- return -ENOSPC;
-
- t = 0;
-
- while (count > 0) {
-
- if (!pt_poll_dsc(tape, HZ / 100, PT_TMO, "write"))
- return -EIO;
-
- n = count;
- if (n > 32768)
- n = 32768; /* max per command */
- b = (n - 1 + tape->bs) / tape->bs;
- n = b * tape->bs; /* rounded up to even block */
-
- wr_cmd[4] = b;
-
- r = pt_command(tape, wr_cmd, n, "write");
-
- mdelay(1);
-
- if (r) { /* error delivering command only */
- pt_req_sense(tape, 0);
- return -EIO;
- }
-
- while (1) {
-
- r = pt_wait(tape, STAT_BUSY,
- STAT_DRQ | STAT_ERR | STAT_READY,
- DBMSG("write DRQ"), NULL);
-
- if (r & STAT_SENSE) {
- pi_disconnect(pi);
- pt_req_sense(tape, 0);
- return -EIO;
- }
-
- if (r)
- tape->flags |= PT_EOF;
-
- s = read_reg(pi, 7);
-
- if (!(s & STAT_DRQ))
- break;
-
- n = (read_reg(pi, 4) + 256 * read_reg(pi, 5));
- p = (read_reg(pi, 2) & 3);
- if (p != 0) {
- pi_disconnect(pi);
- printk("%s: Phase error on write: %d \n",
- tape->name, p);
- return -EIO;
- }
-
- while (n > 0) {
- k = n;
- if (k > PT_BUFSIZE)
- k = PT_BUFSIZE;
- b = k;
- if (b > count)
- b = count;
- if (copy_from_user(tape->bufptr, buf + t, b)) {
- pi_disconnect(pi);
- return -EFAULT;
- }
- pi_write_block(pi, tape->bufptr, k);
- t += b;
- count -= b;
- n -= k;
- }
-
- }
- pi_disconnect(pi);
- if (tape->flags & PT_EOF)
- break;
- }
-
- return t;
-}
-
-static int __init pt_init(void)
-{
- int unit;
- int err;
-
- if (disable) {
- err = -EINVAL;
- goto out;
- }
-
- if (pt_detect()) {
- err = -ENODEV;
- goto out;
- }
-
- err = register_chrdev(major, name, &pt_fops);
- if (err < 0) {
- printk("pt_init: unable to get major number %d\n", major);
- for (unit = 0; unit < PT_UNITS; unit++)
- if (pt[unit].present)
- pi_release(pt[unit].pi);
- goto out;
- }
- major = err;
- pt_class = class_create(THIS_MODULE, "pt");
- if (IS_ERR(pt_class)) {
- err = PTR_ERR(pt_class);
- goto out_chrdev;
- }
-
- for (unit = 0; unit < PT_UNITS; unit++)
- if (pt[unit].present) {
- device_create(pt_class, NULL, MKDEV(major, unit), NULL,
- "pt%d", unit);
- device_create(pt_class, NULL, MKDEV(major, unit + 128),
- NULL, "pt%dn", unit);
- }
- goto out;
-
-out_chrdev:
- unregister_chrdev(major, "pt");
-out:
- return err;
-}
-
-static void __exit pt_exit(void)
-{
- int unit;
- for (unit = 0; unit < PT_UNITS; unit++)
- if (pt[unit].present) {
- device_destroy(pt_class, MKDEV(major, unit));
- device_destroy(pt_class, MKDEV(major, unit + 128));
- }
- class_destroy(pt_class);
- unregister_chrdev(major, name);
- for (unit = 0; unit < PT_UNITS; unit++)
- if (pt[unit].present)
- pi_release(pt[unit].pi);
-}
-
-MODULE_LICENSE("GPL");
-module_init(pt_init)
-module_exit(pt_exit)
--
2.14.2

Next message: Richard Weinberger: "Re: [PATCH 2/2 v2] mtd: ubi: use put_device() if device_register fail"
Previous message: Sergey Senozhatsky: "Re: linux-next: manual merge of the printk tree with the asm-generic tree"
Next in thread: Ondrej Zary: "Re: [PATCH, RFC] block: remove the paride drivers"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]