Re: [PATCH] Bluebooth: btusb: Fix quirk for Atheros 1525/QCA6174

[Marcel Holtmann]

Hi Takashi,

> The Atheros 1525/QCA6174 BT doesn't seem working properly on the
> recent kernels, as it tries to load a wrong firmware
> ar3k/AthrBT_0x00000200.dfu and it fails.
> 
> This seems to have been a problem for some time, and the known
> workaround is to apply BTUSB_QCA_ROM quirk instead of BTUSB_ATH3012.
> 
> The device in question is:
> 
> T: Bus=01 Lev=01 Prnt=01 Port=09 Cnt=03 Dev#=  4 Spd=12   MxCh= 0
> D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
> P: Vendor=0cf3 ProdID=3004 Rev= 0.01
> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
> E: Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
> 
> Bugzilla: http://bugzilla.opensuse.org/show_bug.cgi?id=1082504
> Reported-and-tested-by: Ivan Levshin <ivan.levshin@xxxxxxxxxxxxxx>
> Cc: <stable@xxxxxxxxxxxxxxx>
> Signed-off-by: Takashi Iwai <tiwai@xxxxxxx>
> 
> ---
> drivers/bluetooth/btusb.c |    2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)

patch has been applied to bluetooth-stable tree.

Regards

Marcel