Re: [PATCH 3/7] dt-bindings: opp: Introduce qcom-opp bindings

[Viresh Kumar]

On 16-03-18, 09:38, Rajendra Nayak wrote:
> On Qualcomm platforms, an OPP node needs to describe an
> additional level/corner value that is then communicated to
> a remote microprocessor by the CPU, which then takes some
> actions (like adjusting voltage values across various rails)
> based on the value passed.
> 
> Describe these bindings in the qcom-opp bindings document.
> 
> Signed-off-by: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/opp/qcom-opp.txt | 25 ++++++++++++++++++++++
>  1 file changed, 25 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/opp/qcom-opp.txt
> 
> diff --git a/Documentation/devicetree/bindings/opp/qcom-opp.txt b/Documentation/devicetree/bindings/opp/qcom-opp.txt
> new file mode 100644
> index 000000000000..56fe87751881
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/opp/qcom-opp.txt
> @@ -0,0 +1,25 @@
> +Qualcomm OPP bindings to descibe OPP nodes with corner/level values
> +
> +OPP tables for devices on qualcomm platforms require an additional
> +platform specific corner/level value to be specified.
> +This value is passed on to the RPM (Resource Power Manager) by
> +the CPU, which then takes the necessary actions to set a voltage
> +rail to a appropriate voltage based on the value passed.
> +
> +The bindings are based on top of the operating-points-v2 bindings
> +described in Documentation/devicetree/bindings/opp/opp.txt
> +Additional properties are described below.
> +
> +* OPP Table Node
> +
> +Required properties:
> +- compatible: Allow OPPs to express their compatibility. It should be:
> +  "operating-points-v2-qcom"
> +
> +* OPP Node
> +
> +Required properties:
> +- qcom,level: On Qualcomm platforms an OPP node can describe a positive value
> +representing a corner/level thats comminicated with a remote microprocessor
> +(Usually called the RPM) which then translates it into a certain voltage on
> +a voltage rail.

Acked-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx>

-- 
viresh