Re: [PATCH 2/7] soc: qcom: rpmpd: Add a powerdomain driver to model corners

[Rob Herring]

On Fri, Mar 16, 2018 at 09:38:19AM +0530, Rajendra Nayak wrote:
> The powerdomains for corners just pass the performance state set by the
> consumers to the RPM (Remote Power manager) which then takes care
> of setting the appropriate voltage on the corresponding rails to
> meet the performance needs.
> 
> We add all powerdomain data needed on msm8996 here. This driver can easily
> be extended by adding data for other qualcomm SoCs as well.
> 
> Signed-off-by: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
> Signed-off-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
> ---
>  .../devicetree/bindings/power/qcom,rpmpd.txt       |  14 +
>  drivers/soc/qcom/Kconfig                           |   9 +
>  drivers/soc/qcom/Makefile                          |   1 +
>  drivers/soc/qcom/rpmpd.c                           | 299 +++++++++++++++++++++
>  4 files changed, 323 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/power/qcom,rpmpd.txt
>  create mode 100644 drivers/soc/qcom/rpmpd.c
> 
> diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.txt b/Documentation/devicetree/bindings/power/qcom,rpmpd.txt
> new file mode 100644
> index 000000000000..4d7a4a1f054f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.txt
> @@ -0,0 +1,14 @@
> +Qualcomm RPM Powerdomains
> +
> +* For RPM powerdomains, we communicate a performance state to RPM
> +which then translates it into a corresponding voltage on a rail
> +
> +Required Properties:
> + - compatible: Should be one of the following
> +	* qcom,rpmpd-msm8996: RPM Powerdomain for the msm8996 family of SoC

qcom,msm8996-rpmpd

> + - power-domain-cells: number of cells in power domain specifier
> +	must be 1.
> + - domain-performance-state: One or more nodes describing the performance-states
> +	supported by the powerdomain.
> +	For domain-performance-state bindings refer to
> +	Documentation/devicetree/bindings/power/power_domain.txt