[PATCH AUTOSEL for 4.4 057/167] iio: hi8435: cleanup reset gpio

[Sasha Levin]

From: Nikita Yushchenko <nikita.yoush@xxxxxxxxxxxxxxxxxx>

[ Upstream commit 61305664a542f874283f74bf0b27ddb31f5045d7 ]

Reset GPIO is active low.

Currently driver uses gpiod_set_value(1) to clean reset, which depends
on device tree to contain GPIO_ACTIVE_HIGH - that does not match reality.

This fixes driver to use _raw version of gpiod_set_value() to enforce
active-low semantics despite of what's written in device tree. Allowing
device tree to override that only opens possibility for errors and does
not add any value.

Additionally, use _cansleep version to make things work with i2c-gpio
and other sleeping gpio drivers.

Signed-off-by: Nikita Yushchenko <nikita.yoush@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Jonathan Cameron <jic23@xxxxxxxxxx>
Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxxxx>
---
 drivers/iio/adc/hi8435.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/iio/adc/hi8435.c b/drivers/iio/adc/hi8435.c
index ba9e8fc747b8..7401f102dff4 100644
--- a/drivers/iio/adc/hi8435.c
+++ b/drivers/iio/adc/hi8435.c
@@ -453,13 +453,15 @@ static int hi8435_probe(struct spi_device *spi)
 	priv->spi = spi;
 
 	reset_gpio = devm_gpiod_get(&spi->dev, NULL, GPIOD_OUT_LOW);
-	if (IS_ERR(reset_gpio)) {
-		/* chip s/w reset if h/w reset failed */
+	if (!IS_ERR(reset_gpio)) {
+		/* need >=100ns low pulse to reset chip */
+		gpiod_set_raw_value_cansleep(reset_gpio, 0);
+		udelay(1);
+		gpiod_set_raw_value_cansleep(reset_gpio, 1);
+	} else {
+		/* s/w reset chip if h/w reset is not available */
 		hi8435_writeb(priv, HI8435_CTRL_REG, HI8435_CTRL_SRST);
 		hi8435_writeb(priv, HI8435_CTRL_REG, 0);
-	} else {
-		udelay(5);
-		gpiod_set_value(reset_gpio, 1);
 	}
 
 	spi_set_drvdata(spi, idev);
-- 
2.14.1