[PATCH v4 2/2] dt-bindings: usb: rt1711h device tree binding document

[ShuFan Lee]

From: ShuFan Lee <shufan_lee@xxxxxxxxxxx>

Add device tree binding document for Richtek RT1711H Type-C chip driver

Signed-off-by: ShuFan Lee <shufan_lee@xxxxxxxxxxx>
---
 .../devicetree/bindings/usb/richtek,rt1711h.txt    | 30 ++++++++++++++++++++++
 1 file changed, 30 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/richtek,rt1711h.txt

 changelogs between v2 & v3
 - add dt-bindings for rt1711h typec driver

diff --git a/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt b/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt
new file mode 100644
index 000000000000..7da4dac78ea7
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt
@@ -0,0 +1,30 @@
+Richtek RT1711H TypeC PD Controller.
+
+Required properties:
+ - compatible : Must be "richtek,rt1711h".
+ - reg : Must be 0x4e, it's slave address of RT1711H.
+
+Recommended properties :
+ - interrupt-parent : the phandle for the interrupt controller that
+   provides interrupts for this device.
+ - interrupts : <a b> where a is the interrupt number and b represents an
+   encoding of the sense and level information for the interrupt.
+
+Optional properties :
+ - rt,intr-gpios : IRQ GPIO pin that's connected to RT1711H interrupt.
+   if interrupt-parent & interrupts are not defined, use this property instead.
+
+Example :
+rt1711h@4e {
+	compatible = "richtek,rt1711h";
+	reg = <0x4e>;
+	interrupt-parent = <&gpio26>;
+	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+};
+
+Example using rt,intr-gpios :
+rt1711h@4e {
+	compatible = "richtek,rt1711h";
+	reg = <0x4e>;
+	rt,intr-gpios = <&gpio26 0 0x0>;
+};
-- 
1.9.1