Re: [RFT][PATCH v5 7/7] cpuidle: menu: Avoid selecting shallow states with stopped tick

[Rafael J. Wysocki]

On Tue, Mar 20, 2018 at 6:15 PM, Doug Smythies <dsmythies@xxxxxxxxx> wrote:
> On 2018.03.20 11:22 Doug Smythies wrote:
>> On 2018.03.19 05:47 Thomas Ilsche wrote:
>>> On 2018-03-15 23:19, Rafael J. Wysocki wrote:
>>>> From: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
>>>>
>>>> If the scheduler tick has been stopped already and the governor
>>>> selects a shallow idle state, the CPU can spend a long time in that
>>>> state if the selection is based on an inaccurate prediction of idle
>>>> time.  That effect turns out to be noticeable, so it needs to be
>>>> mitigated.
>>>
>>> What are some common causes for that situation?
>>> How could I trigger this for testing?
>>
>> It appeared quite readily with my simple 100% load
>> on one CPU test. Back then (V3) there only 6 patches in the set,
>> and before the re-spin there ended up being a patch 7 of 6, which
>> made a significant difference in both package power and the
>> histograms of times in each idle state.
>>
>> Reference:
>> https://marc.info/?l=linux-pm&m=152075419526696&w=2
>
> I made a kernel (4.16-rc5) with only patches 1 to 6 of 7 (V6)
> and also with the poll fix.
>
> I took an old graph:
> http://fast.smythies.com/rjwv3pp_100.png
>
> and removed an obsolete line and added a line from this
> kernel:
>
> http://fast.smythies.com/rjwv6m_100.png
>
> I also acquired a trace during the test and observe:
>
> Report: Summary:
>
> Idle State 0: Total Entries: 699 : PowerNightmares: 0 : Not PN time (seconds): 0.031169 : PN time: 0.000000 : Ratio: 0.000000
> Idle State 1: Total Entries: 3855 : PowerNightmares: 106 : Not PN time (seconds): 0.123759 : PN time: 43.511914 : Ratio: 351.585856
> Idle State 2: Total Entries: 3688 : PowerNightmares: 181 : Not PN time (seconds): 1.303237 : PN time: 63.241424 : Ratio: 48.526418
> Idle State 3: Total Entries: 528 : PowerNightmares: 115 : Not PN time (seconds): 0.276290 : PN time: 44.764111 : Ratio: 162.018571
>
> Where "PowerNightmare" is defined as spending excessive time in an idle state,
> and arbitrarily defined for my processor as:
>
> #define THRESHOLD_0 100       /* Idle state 0 PowerNightmare threshold in microseconds */
> #define THRESHOLD_1 1000      /* Idle state 1 PowerNightmare threshold in microseconds */
> #define THRESHOLD_2 2000      /* Idle state 2 PowerNightmare threshold in microseconds */
> #define THRESHOLD_3 4000      /* Idle state 3 PowerNightmare threshold in microseconds */
>
> While this trace file was only about 15 megabytes, I have several 10s of gigabytes of trace data for
> V4 + poll fix and never see any excessive time spent in any idle state.

Thanks for this work!

I prefer it with patch [7/7]. :-)