[PATCH 02/11] staging: iio: tsl2x7x: correct interrupt handler trigger

[Brian Masney]

tsl2x7x_event_handler() was not called as expected when the device was
asserting a hardware interrupt. This patch changes the interrupt line
trigger from rising to falling.

The driver was tested on a TSL2772 hooked up to a Raspberry Pi 2. The
interrupt pin also had a 10K pull-up resistor per the requirements from
the datasheet. The relevant device tree binding:

&i2c1 {
	tsl2772@39 {
		compatible = "amstaos,tsl2772";
		reg = <0x39>;
		interrupt-parent = <&gpio>;
		interrupts = <22 0x2>;
	};
};

With this patch, iio_event_monitor now shows the events when the
channels are outside the defined interrupt thresholds.

$ sudo ./iio_event_monitor tsl2772
Found IIO device with name tsl2772 with device number 0
Event: time: 1478193460053760446, type: proximity, channel: 0, evtype:
thresh, direction: either
...
Event: time: 1478193463020270185, type: illuminance, channel: 0, evtype:
thresh, direction: either
...

Signed-off-by: Brian Masney <masneyb@xxxxxxxxxxxxx>
---
 drivers/staging/iio/light/tsl2x7x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/iio/light/tsl2x7x.c b/drivers/staging/iio/light/tsl2x7x.c
index 82cf9d853b18..59921850a226 100644
--- a/drivers/staging/iio/light/tsl2x7x.c
+++ b/drivers/staging/iio/light/tsl2x7x.c
@@ -1763,7 +1763,7 @@ static int tsl2x7x_probe(struct i2c_client *clientp,
 		ret = devm_request_threaded_irq(&clientp->dev, clientp->irq,
 						NULL,
 						&tsl2x7x_event_handler,
-						IRQF_TRIGGER_RISING |
+						IRQF_TRIGGER_FALLING |
 						IRQF_ONESHOT,
 						"TSL2X7X_event",
 						indio_dev);
-- 
2.14.3