[PATCH 5/8] remoteproc: da8xx: add the missing checke for clk_enable()

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>

The davinci platform is being switched to using the common clock
framework, where clk_enable() can fail. Add the return value check.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
---
 drivers/remoteproc/da8xx_remoteproc.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/remoteproc/da8xx_remoteproc.c b/drivers/remoteproc/da8xx_remoteproc.c
index bf3b9034c319..592bf0fc52e8 100644
--- a/drivers/remoteproc/da8xx_remoteproc.c
+++ b/drivers/remoteproc/da8xx_remoteproc.c
@@ -138,6 +138,7 @@ static int da8xx_rproc_start(struct rproc *rproc)
 	struct device *dev = rproc->dev.parent;
 	struct da8xx_rproc *drproc = (struct da8xx_rproc *)rproc->priv;
 	struct clk *dsp_clk = drproc->dsp_clk;
+	int rv;
 
 	/* hw requires the start (boot) address be on 1KB boundary */
 	if (rproc->bootaddr & 0x3ff) {
@@ -148,7 +149,12 @@ static int da8xx_rproc_start(struct rproc *rproc)
 
 	writel(rproc->bootaddr, drproc->bootreg);
 
-	clk_enable(dsp_clk);
+	rv = clk_enable(dsp_clk);
+	if (rv) {
+		dev_err(dev, "clk_enable() failed: %d\n", rv);
+		return rv;
+	}
+
 	davinci_clk_reset_deassert(dsp_clk);
 
 	return 0;
-- 
2.16.1