Re: [PATCH v3 2/8] gpio: 104-idio-16: Implement get_multiple callback
From: Andy Shevchenko
Date: Wed Mar 21 2018 - 11:32:19 EST
On Sat, Mar 17, 2018 at 5:50 PM, William Breathitt Gray
<vilhelm.gray@xxxxxxxxx> wrote:
> The ACCES I/O 104-IDIO-16 series of devices provides 16
> optically-isolated digital inputs accessed via two 8-bit ports. Since
> eight input lines are acquired on a single port input read, the
> 104-IDIO-16 GPIO driver may improve multiple input reads by utilizing a
> get_multiple callback. This patch implements the
> idio_16_gpio_get_multiple function which serves as the respective
> get_multiple callback.
> +static int idio_16_gpio_get_multiple(struct gpio_chip *chip,
> + unsigned long *mask, unsigned long *bits)
> +{
> + struct idio_16_gpio *const idio16gpio = gpiochip_get_data(chip);
> +
> + *bits = 0;
> + if (*mask & 0xFF0000)
GENMASK(23, 16) ?
> + *bits |= (unsigned long)inb(idio16gpio->base + 1) << 16;
Do you need casting?
> + if (*mask & 0xFF000000)
GENMASK(31, 24) ?
Alternative (and for above):
(*mask >> 24) & 0xff
(*mask >> 16) & 0xff
> + *bits |= (unsigned long)inb(idio16gpio->base + 5) << 24;
Do you need casting?
> +
> + return 0;
> +}
> +
> static void idio_16_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
> {
> struct idio_16_gpio *const idio16gpio = gpiochip_get_data(chip);
> @@ -244,6 +258,7 @@ static int idio_16_probe(struct device *dev, unsigned int id)
> idio16gpio->chip.direction_input = idio_16_gpio_direction_input;
> idio16gpio->chip.direction_output = idio_16_gpio_direction_output;
> idio16gpio->chip.get = idio_16_gpio_get;
> + idio16gpio->chip.get_multiple = idio_16_gpio_get_multiple;
> idio16gpio->chip.set = idio_16_gpio_set;
> idio16gpio->chip.set_multiple = idio_16_gpio_set_multiple;
> idio16gpio->base = base[id];
> --
> 2.16.2
>
--
With Best Regards,
Andy Shevchenko