Re: [PATCH] Input: alps - Demystify trackstick initialization for v3 and v6 protocols
From: Pali RohÃr
Date: Wed Mar 21 2018 - 12:41:43 EST
That is pity, but OK.
Anyway, as wrote patch which I sent in the first email matches this
documentation.
Dmitry, can you review/comment/accept/reject this patch?
On Monday 19 March 2018 08:41:19 Masaki Ota wrote:
> Hi, Pali,
>
> v3/v6 devices are T3 type, and it can use only Method 2.
> P36 (At this time GLIDEPOINT_T3 uses the Method 2 ....)
> T3 has the potential that uses Method2, but I think it needs to change Firmware.
>
> Best Regards,
> Masaki Ota
> -----Original Message-----
> From: Pali RohÃr [mailto:pali.rohar@xxxxxxxxx]
> Sent: Friday, March 16, 2018 7:58 PM
> To: åç çå Masaki Ota <masaki.ota@xxxxxxxxxxx>
> Cc: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>; linux-input@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
> Subject: Re: [PATCH] Input: alps - Demystify trackstick initialization for v3 and v6 protocols
>
> Great, thank you. Enabling that RAW/extended/SP4 mode is done by sequence E6, E6, E6, F3, C8, F3, 14 (written in page 35) and it matches what function alps_trackstick_enter_extended_mode_v3_v6() in my patch is doing. So is correct.
>
> On page 36 I see that there is described Method 1 for reporting stick data which prevents cursor jumps. Seems that kernel uses Method 2.
> Method 1 depends on some prioritization.
>
> Do you have some information how to activate Method 1? Sometimes I observe that problem with "cursor jumps" and from Method 1 could prevent it. So I would like to try experimenting...
>
> On Wednesday 14 March 2018 23:56:46 Masaki Ota wrote:
> > Hi, Pali,
> >
> > I have added Appendix.
> > According to this spec documents, SP raw mode is SP 4 byte mode.
> > I think Extended mode meaning is almost all the same as Raw mode.
> > The description of how to set is written in Page 35.
> >
> > Best Regards,
> > Masaki Ota
> > -----Original Message-----
> > From: Pali RohÃr [mailto:pali.rohar@xxxxxxxxx]
> > Sent: Thursday, March 15, 2018 7:58 AM
> > To: åç çå Masaki Ota <masaki.ota@xxxxxxxxxxx>
> > Cc: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>;
> > linux-input@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
> > Subject: Re: [PATCH] Input: alps - Demystify trackstick initialization
> > for v3 and v6 protocols
> >
> > Hi! Thank you for information.
> >
> > Your PS/2 Aux Port Control description seems to really matches. Just there is reverse order of bits. Bit 0 in description is highest, therefore matches BIT(7) macro.
> >
> > Bit 6 in description (BIT(1) in code) describes SP Extended Mode which alps.c enabled. And in that description is written:
> >
> > "If 1 SP is extended packet format (driver must set SP raw mode and GP absolute mode)."
> >
> > Do you have any idea what "SP raw mode" is? How to set it? For me it looks like it could be that extended mode of trackstick itself.
> >
> > "GP absolute mode" I guess is GlidePoint absolute mode, therefore
> > enable
> > 6 byte absolute mode for touchpad.
> >
> > And for Bit 7 (BIT(0)) is written:
> >
> > This bit is used with the PS/2 Aux port to use the Pass-Thru mode ( see appendix A ). Do you have some information about this appendix A?
> >
> > On Wednesday 14 March 2018 10:21:43 Masaki Ota wrote:
> > > Hi, Pali,
> > >
> > > I just picked up the spec which relates with trackstic.
> > >
> > > Best Regards,
> > > Masaki Ota
> > > -----Original Message-----
> > > From: Pali RohÃr [mailto:pali.rohar@xxxxxxxxx]
> > > Sent: Tuesday, March 13, 2018 8:14 AM
> > > To: åç çå Masaki Ota <masaki.ota@xxxxxxxxxxx>; Dmitry Torokhov
> > > <dmitry.torokhov@xxxxxxxxx>
> > > Cc: linux-input@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
> > > Subject: Re: [PATCH] Input: alps - Demystify trackstick
> > > initialization for v3 and v6 protocols
> > >
> > > Masaki, if you have access to the internal ALPS v3 / Rushmore
> > > documentation, I would like to have a review of this patch or
> > > confirmation of those information :-)
> >
> > --
> > Pali RohÃr
> > pali.rohar@xxxxxxxxx
>
> --
> Pali RohÃr
> pali.rohar@xxxxxxxxx
--
Pali RohÃr
pali.rohar@xxxxxxxxx
Attachment:
signature.asc
Description: PGP signature