Re: [PATCH 4.15 00/84] 4.15.13-stable review

[Greg Kroah-Hartman]

On Fri, Mar 23, 2018 at 07:52:45PM +0530, Naresh Kamboju wrote:
> On 23 March 2018 at 15:23, Greg Kroah-Hartman
> <gregkh@xxxxxxxxxxxxxxxxxxx> wrote:
> > This is the start of the stable review cycle for the 4.15.13 release.
> > There are 84 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Sun Mar 25 09:53:34 UTC 2018.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> >         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.15.13-rc1.gz
> > or in the git tree and branch at:
> >         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.15.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
> >
> > -------------
> > Pseudo-Shortlog of commits:
> >
> > Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
> >     Linux 4.15.13-rc1
> >
> > Leon Romanovsky <leonro@xxxxxxxxxxxx>
> >     RDMA/ucma: Don't allow join attempts for unsupported AF family
> >
> > Leon Romanovsky <leonro@xxxxxxxxxxxx>
> >     RDMA/ucma: Fix access to non-initialized CM_ID object
> >
> > Jerome Brunet <jbrunet@xxxxxxxxxxxx>
> >     clk: migrate the count of orphaned clocks at init
> >
> > Tatyana Nikolova <tatyana.e.nikolova@xxxxxxxxx>
> >     RDMA/core: Do not use invalid destination in determining port reuse
> >
> > Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> >     serial: 8250_pci: Don't fail on multiport card class
> >
> > Adit Ranadive <aditr@xxxxxxxxxx>
> >     RDMA/vmw_pvrdma: Fix usage of user response structures in ABI file
> >
> > Boris Pismenny <borisp@xxxxxxxxxxxx>
> >     IB/mlx5: Fix out-of-bounds read in create_raw_packet_qp_rq
> >
> > Boris Pismenny <borisp@xxxxxxxxxxxx>
> >     IB/mlx5: Fix integer overflows in mlx5_ib_create_srq
> >
> > Vignesh R <vigneshr@xxxxxx>
> >     dmaengine: ti-dma-crossbar: Fix event mapping for TPCC_EVT_MUX_60_63
> >
> > Gary R Hook <gary.hook@xxxxxxx>
> >     hwrng: core - Clean up RNG list when last hwrng is unregistered
> >
> > Lars Persson <lars.persson@xxxxxxxx>
> >     crypto: artpec6 - set correct iv size for gcm(aes)
> >
> > Sergej Sawazki <sergej@xxxxxxxxxx>
> >     clk: si5351: Rename internal plls to avoid name collisions
> >
> > Lars-Peter Clausen <lars@xxxxxxxxxx>
> >     clk: axi-clkgen: Correctly handle nocount bit in recalc_rate()
> >
> > Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
> >     clk: Don't touch hardware when reparenting during registration
> >
> > Romain Izard <romain.izard.pro@xxxxxxxxx>
> >     clk: at91: pmc: Wait for clocks when resuming
> >
> > Benjamin Coddington <bcodding@xxxxxxxxxx>
> >     nfsd4: permit layoutget of executable-only files
> >
> > Joel Stanley <joel@xxxxxxxxx>
> >     ARM: dts: aspeed-evb: Add unit name to memory node
> >
> > Anton Vasilyev <vasilyev@xxxxxxxxx>
> >     RDMA/ocrdma: Fix permissions for OCRDMA_RESET_STATS
> >
> > James Smart <jsmart2021@xxxxxxxxx>
> >     scsi: lpfc: Fix issues connecting with nvme initiator
> >
> > James Smart <jsmart2021@xxxxxxxxx>
> >     scsi: lpfc: Fix SCSI LUN discovery when SCSI and NVME enabled
> >
> > Johan Hovold <johan@xxxxxxxxxx>
> >     soc: qcom: smsm: fix child-node lookup
> >
> > Haishuang Yan <yanhaishuang@xxxxxxxxxxxxxxxxxxxx>
> >     ip_gre: fix potential memory leak in erspan_rcv
> >
> > Haishuang Yan <yanhaishuang@xxxxxxxxxxxxxxxxxxxx>
> >     ip_gre: fix error path when erspan_rcv failed
> >
> > Alexey Kodanev <alexey.kodanev@xxxxxxxxxx>
> >     ip6_vti: adjust vti mtu according to mtu of lower device
> >
> > Jerry Snitselaar <jsnitsel@xxxxxxxxxx>
> >     iommu/vt-d: clean up pr_irq if request_threaded_irq fails
> >
> > Brian Norris <briannorris@xxxxxxxxxxxx>
> >     pinctrl: rockchip: enable clock when reading pin direction register
> >
> > Florian Fainelli <f.fainelli@xxxxxxxxx>
> >     pinctrl: Really force states during suspend/resume
> >
> > Jerome Brunet <jbrunet@xxxxxxxxxxxx>
> >     clk: use round rate to bail out early in set_rate
> >
> > Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
> >     dt-bindings: display: panel: Fix compatible string for Toshiba LT089AC29000
> >
> > Jerome Brunet <jbrunet@xxxxxxxxxxxx>
> >     clk: check ops pointer on clock register
> >
> > Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
> >     media: davinci: fix a debug printk
> >
> > Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> >     PCI: rcar: Handle rcar_pcie_parse_request_of_pci_ranges() failures
> >
> > Niklas Cassel <niklas.cassel@xxxxxxxx>
> >     PCI: endpoint: Fix find_first_zero_bit() usage
> >
> > Kishon Vijay Abraham I <kishon@xxxxxx>
> >     PCI: designware-ep: Fix ->get_msi() to check MSI_EN bit
> >
> > Robert Walker <robert.walker@xxxxxxx>
> >     coresight: Fix disabling of CoreSight TPIU
> >
> > Sahara <keun-o.park@xxxxxxxxxxxxx>
> >     pty: cancel pty slave port buf's work in tty_release
> >
> > Peter Ujfalusi <peter.ujfalusi@xxxxxx>
> >     drm/omap: DMM: Check for DMM readiness after successful transaction commit
> >
> > Zhoujie Wu <zjwu@xxxxxxxxxxx>
> >     mmc: sdhci-xenon: wait 5ms after set 1.8V signal enable
> >
> > H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
> >     omapdrm: panel: fix compatible vendor string for td028ttec1
> >
> > Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
> >     vgacon: Set VGA struct resource types
> >
> > Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
> >     PCI/ASPM: Calculate LTR_L1.2_THRESHOLD from device characteristics
> >
> > Yonghong Song <yhs@xxxxxx>
> >     bpf/cgroup: fix a verification error for a CGROUP_DEVICE type prog
> >
> > Bharat Potnuri <bharat@xxxxxxxxxxx>
> >     iser-target: avoid reinitializing rdma contexts for isert commands
> >
> > Artemy Kovalyov <artemyko@xxxxxxxxxxxx>
> >     IB/umem: Fix use of npages/nmap fields
> >
> > Parav Pandit <parav@xxxxxxxxxxxx>
> >     RDMA/cma: Use correct size when writing netlink stats
> >
> > Erez Shitrit <erezsh@xxxxxxxxxxxx>
> >     IB/ipoib: Avoid memory leak if the SA returns a different DGID
> >
> > Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
> >     rtc: ac100: Fix multiple race conditions
> >
> > Shuah Khan <shuah@xxxxxxxxxx>
> >     media: s5p-mfc: Fix lock contention - request_firmware() once
> >
> > Russell King <rmk+kernel@xxxxxxxxxxxxxxx>
> >     sfp: fix non-detection of PHY
> >
> > Russell King <rmk+kernel@xxxxxxxxxxxxxxx>
> >     sfp: fix EEPROM reading in the case of non-SFF8472 SFPs
> >
> > Jerome Brunet <jbrunet@xxxxxxxxxxxx>
> >     net: phy: meson-gxl: check phy_write return value
> >
> > Kees Cook <keescook@xxxxxxxxxxxx>
> >     /dev/mem: Add bounce buffer for copy-out
> >
> > Liu, Changcheng <changcheng.liu@xxxxxxxxx>
> >     mmc: block: fix logical error to avoid memory leak
> >
> > Daniel Drake <drake@xxxxxxxxxxxx>
> >     mmc: avoid removing non-removable hosts during suspend
> >
> > Logan Gunthorpe <logang@xxxxxxxxxxxx>
> >     drm/tilcdc: ensure nonatomic iowrite64 is not used
> >
> > Kedareswara rao Appana <appana.durga.rao@xxxxxxxxxx>
> >     dmaengine: zynqmp_dma: Fix race condition in the probe
> >
> > Shawn Nematbakhsh <shawnn@xxxxxxxxxxxx>
> >     platform/chrome: Use proper protocol transfer function
> >
> > Guenter Roeck <linux@xxxxxxxxxxxx>
> >     watchdog: Fix kref imbalance seen if handle_boot_enabled=0
> >
> > Guenter Roeck <linux@xxxxxxxxxxxx>
> >     watchdog: Fix potential kref imbalance when opening watchdog
> >
> > Arnd Bergmann <arnd@xxxxxxxx>
> >     cros_ec: fix nul-termination for firmware build info
> >
> > Stefan Potyra <Stefan.Potyra@xxxxxxxxxxxxxx>
> >     serial: 8250_dw: Disable clock on error
> >
> > Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
> >     tty: goldfish: Enable 'earlycon' only if built-in
> >
> > Bjørn Mork <bjorn@xxxxxxx>
> >     qmi_wwan: set FLAG_SEND_ZLP to avoid network initiated disconnect
> >
> > Ron Economos <w6rz@xxxxxxxxxxx>
> >     media: [RESEND] media: dvb-frontends: Add delay to Si2168 restart
> >
> > Balaji Pothunoori <bpothuno@xxxxxxxxxxxxxxxx>
> >     ath10k: handling qos at STA side based on AP WMM enable/disable
> >
> > Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
> >     media: bt8xx: Fix err 'bt878_probe()'
> >
> > Nicolas Iooss <nicolas.iooss_linux@xxxxxxx>
> >     rtlwifi: always initialize variables given to RT_TRACE()
> >
> > Tsang-Shian Lin <thlin@xxxxxxxxxxx>
> >     rtlwifi: rtl_pci: Fix the bug when inactiveps is enabled.
> >
> > Roman Gushchin <guro@xxxxxx>
> >     libbpf: prefer global symbols as bpf program name source
> >
> > Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> >     spi: sh-msiof: Avoid writing to registers from spi_master.setup()
> >
> > Neal Cardwell <ncardwell@xxxxxxxxxx>
> >     tcp: allow TLP in ECN CWR
> >
> > Haiyang Zhang <haiyangz@xxxxxxxxxxxxx>
> >     hv_netvsc: Fix the TX/RX buffer default sizes
> >
> > Haiyang Zhang <haiyangz@xxxxxxxxxxxxx>
> >     hv_netvsc: Fix the receive buffer size limit
> >
> > Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
> >     RDMA/iwpm: Fix uninitialized error code in iwpm_send_mapinfo()
> >
> > Yuval Shaia <yuval.shaia@xxxxxxxxxx>
> >     IB/ipoib: Warn when one port fails to initialize
> >
> > Richard Leitner <richard.leitner@xxxxxxxxxxx>
> >     net: fec: add phy_reset_after_clk_enable() support
> 
> This fails to build for arm32 with default config on both 4.14 and 4.15
> 
> GCCVERSION ?= "linaro-6.2"
> 
> drivers/net/ethernet/freescale/fec_main.c: In function 'fec_enet_clk_enable':
> drivers/net/ethernet/freescale/fec_main.c:1876:3: error: implicit declaration
> of function phy_reset_after_clk_enable [-Werror=implicit-function-declaration]
>     phy_reset_after_clk_enable(ndev->phydev);
>     ^~~~~~~~~~~~~~~~~~~~~~~~~~
> cc1: some warnings being treated as errors

Now dropped from 4.14.y and 4.15.y queues, thanks.

greg k-h