Re: [PATCH net-next 2/8] dt-bindings: net: add DT bindings for Microsemi MIIM

[Florian Fainelli]

On 03/23/2018 01:11 PM, Alexandre Belloni wrote:
> DT bindings for the Microsemi MII Management Controller found on Microsemi
> SoCs
> 
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Signed-off-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
> ---
>  .../devicetree/bindings/net/mscc-miim.txt          | 25 ++++++++++++++++++++++
>  1 file changed, 25 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/mscc-miim.txt
> 
> diff --git a/Documentation/devicetree/bindings/net/mscc-miim.txt b/Documentation/devicetree/bindings/net/mscc-miim.txt
> new file mode 100644
> index 000000000000..711ac9ab853c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/mscc-miim.txt
> @@ -0,0 +1,25 @@
> +Microsemi MII Management Controller (MIIM) / MDIO
> +=================================================
> +
> +Properties:
> +- compatible: must be "mscc,ocelot-miim"
> +- reg: The base address of the MDIO bus controller register bank. Optionally, a
> +  second register bank can be defined if there is an associated reset register
> +  for internal PHYs
> +- #address-cells: Must be <1>.
> +- #size-cells: Must be <0>.  MDIO addresses have no size component.

Missing interrupt property documentation (sorry), other than that:

Reviewed-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
-- 
Florian