Re: [PATCH v5 3/5] bnx2x: Eliminate duplicate barriers on weakly-ordered archs

[Sinan Kaya]

On 3/24/2018 10:30 AM, Chopra, Manish wrote:
>> -----Original Message-----
>> From: Sinan Kaya [mailto:okaya@xxxxxxxxxxxxxx]
>> Sent: Friday, March 23, 2018 10:44 PM
>> To: David Miller <davem@xxxxxxxxxxxxx>
>> Cc: netdev@xxxxxxxxxxxxxxx; timur@xxxxxxxxxxxxxx; sulrich@xxxxxxxxxxxxxx;
>> linux-arm-msm@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; Elior,
>> Ariel <Ariel.Elior@xxxxxxxxxx>; Dept-Eng Everest Linux L2 <Dept-
>> EngEverestLinuxL2@xxxxxxxxxx>; linux-kernel@xxxxxxxxxxxxxxx
>> Subject: Re: [PATCH v5 3/5] bnx2x: Eliminate duplicate barriers on weakly-
>> ordered archs
>>
>> On 3/23/2018 1:04 PM, David Miller wrote:
>>> From: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
>>> Date: Fri, 23 Mar 2018 12:51:47 -0400
>>>
>>>> It could if txdata->tx_db was not a union. There is a data dependency
>>>> between txdata->tx_db.data.prod and txdata->tx_db.raw.
>>>>
>>>> So, no reordering.
>>>
>>> I don't see it that way, the code requires that:
>>>
>>>  	txdata->tx_db.data.prod += nbd;
>>>
>>> is visible before the doorbell update.>
>>> barrier() doesn't provide that.
>>>
>>> Neither does writel_relaxed().  However plain writel() does.
>>
>> Correct for some architectures including ARM but not correct universally.
>>
>> writel() just guarantees register read/writes before and after to be ordered
>> when HW observes it.
>>
>> writel() doesn't guarantee that the memory update is visible to the HW on all
>> architectures.
>>
>> If you need memory update visibility, that barrier() should have been a
>> wmb()
>>
>> A correct multi-arch pattern is
>>
>> wmb()
>> writel_relaxed()
>> mmiowb()
>>
> 
> Sinan,  Since you have mentioned the use of mmiowb() here after writel_relaxed().
> I believe this is not always correct for all types of IO mapped memory [Specially if IO memory is mapped using write combined (for ex. Ioremap_wc())].
> We have a current issue on our NIC (qede) driver on x86 for which the patch is already been sent more than a week ago [Still awaiting to hear from David on that].
> where mmiowb() seems to be useless since we use write combined mapped doorbell and mmiowb() just seems to be a compiler barrier() there.
> So in order to flush write combined buffer we really need writel_relaxed() followed by a wmb() to synchronize writes among CPU cores.
> I think  the correct pattern in such cases (for write combined IO) would have been like below - 
> 
> wmb();
> writel_relaxed();
> wmb(); -> To flush the writes actually.

You actually have good points. It is the same problem with barrier() description above.

The answer really depends on what you are doing/expecting after mmiowb(). If you expect
that some memory content to be observed by HW, you definitely need a wmb() like
you mentioned. 

If you just want writes to be flushed but you don't expect any memory content to be
updated, you need a mmiowb(). 

https://lwn.net/Articles/198988/
"There is mmiowb(), but its real purpose is to enforce ordering between MMIO operations only."

> 
> Thanks.
> 
> 
> 
> 
> 


-- 
Sinan Kaya
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.