Re: [PATCH 17/19] csky: defconfig
From: Arnd Bergmann
Date: Mon Mar 26 2018 - 09:16:44 EST
On Sun, Mar 18, 2018 at 8:51 PM, Guo Ren <ren_guo@xxxxxxxxx> wrote:
> Signed-off-by: Guo Ren <ren_guo@xxxxxxxxx>
> ---
> arch/csky/configs/gx66xx_defconfig | 549 +++++++++++++++++++++++++++++++++
> arch/csky/configs/qemu_ck807_defconfig | 541 ++++++++++++++++++++++++++++++++
> 2 files changed, 1090 insertions(+)
> create mode 100644 arch/csky/configs/gx66xx_defconfig
> create mode 100644 arch/csky/configs/qemu_ck807_defconfig
These look a lot longer than they should be, they contain many symbols
that I suspenc
are not needed or useful for you.
> diff --git a/arch/csky/configs/gx66xx_defconfig b/arch/csky/configs/gx66xx_defconfig
> new file mode 100644
> index 0000000..7f2a987
> --- /dev/null
> +++ b/arch/csky/configs/gx66xx_defconfig
> @@ -0,0 +1,549 @@
> +# CONFIG_LOCALVERSION_AUTO is not set
> +CONFIG_DEFAULT_HOSTNAME="github.com/c-sky"
This is not a well-formed hostname
> +# CONFIG_SWAP is not set
> +CONFIG_SYSVIPC=y
> +CONFIG_POSIX_MQUEUE=y
> +# CONFIG_FHANDLE is not set
> +CONFIG_USELIB=y
> +CONFIG_AUDIT=y
> +CONFIG_IRQ_DOMAIN_DEBUG=y
> +CONFIG_NO_HZ_IDLE=y
> +CONFIG_HIGH_RES_TIMERS=y
> +CONFIG_BSD_PROCESS_ACCT=y
> +CONFIG_BSD_PROCESS_ACCT_V3=y
> +CONFIG_RELAY=y
> +CONFIG_SYSCTL_SYSCALL=y
> +CONFIG_KALLSYMS_ALL=y
> +# CONFIG_AIO is not set
Disabling swap, fhandle or AIO seems odd, those are commonly
used symbols.
> +CONFIG_USERFAULTFD=y
> +CONFIG_EMBEDDED=y
CONFIG_EMBEDDED should generally not be selected, it's only for
very unusual configurations that need to disable symbols that are
normally required.
> +# CONFIG_PERF_EVENTS is not set
> +# CONFIG_SLUB_DEBUG is not set
> +# CONFIG_COMPAT_BRK is not set
> +CONFIG_PROFILING=y
> +CONFIG_OPROFILE=y
oprofile can go now, since you said you'd remove the code.
> +CONFIG_MODULES=y
> +CONFIG_MODULE_UNLOAD=y
> +CONFIG_BLK_DEV_BSGLIB=y
> +CONFIG_BLK_DEV_INTEGRITY=y
> +CONFIG_PARTITION_ADVANCED=y
> +CONFIG_ACORN_PARTITION=y
> +CONFIG_ACORN_PARTITION_ICS=y
> +CONFIG_ACORN_PARTITION_RISCIX=y
> +CONFIG_AIX_PARTITION=y
> +CONFIG_OSF_PARTITION=y
> +CONFIG_AMIGA_PARTITION=y
> +CONFIG_ATARI_PARTITION=y
> +CONFIG_MAC_PARTITION=y
> +CONFIG_BSD_DISKLABEL=y
> +CONFIG_MINIX_SUBPARTITION=y
> +CONFIG_SOLARIS_X86_PARTITION=y
> +CONFIG_UNIXWARE_DISKLABEL=y
> +CONFIG_LDM_PARTITION=y
> +CONFIG_SGI_PARTITION=y
> +CONFIG_ULTRIX_PARTITION=y
> +CONFIG_SUN_PARTITION=y
> +CONFIG_KARMA_PARTITION=y
> +CONFIG_SYSV68_PARTITION=y
These block device configuration options all seem misplaced
here, it's extremely unlikely that you need them.
> +CONFIG_CMDLINE_PARTITION=y
> +CONFIG_DEFAULT_DEADLINE=y
> +CONFIG_FB_NATIONALCHIP=y
> +CONFIG_RAM_BASE=0x10000000
> +# CONFIG_SUSPEND is not set
> +# CONFIG_COMPACTION is not set
> +CONFIG_NET=y
> +CONFIG_PACKET=y
> +CONFIG_UNIX=y
> +CONFIG_INET=y
> +CONFIG_IP_MULTICAST=y
> +CONFIG_IP_PNP=y
> +CONFIG_IP_PNP_DHCP=y
> +CONFIG_IP_PNP_BOOTP=y
> +CONFIG_IP_PNP_RARP=y
> +# CONFIG_IPV6 is not set
> +CONFIG_CFG80211=y
> +CONFIG_CFG80211_DEBUGFS=y
> +CONFIG_CFG80211_WEXT=y
I would guess you want IPV6 but not WEXT here.
> +CONFIG_MAC80211=y
> +CONFIG_MAC80211_DEBUGFS=y
> +CONFIG_RFKILL=y
> +CONFIG_RFKILL_INPUT=y
> +CONFIG_RFKILL_GPIO=y
> +CONFIG_DEVTMPFS=y
> +CONFIG_DEVTMPFS_MOUNT=y
> +# CONFIG_STANDALONE is not set
No need to turn this off, it might just get in the way of build
testing.
> +CONFIG_KEYBOARD_ADP5588=m
> +CONFIG_KEYBOARD_ADP5589=m
> +CONFIG_KEYBOARD_QT1070=m
> +CONFIG_KEYBOARD_QT2160=m
> +CONFIG_KEYBOARD_LKKBD=m
There are many input devices listed here, most of which you almost
certainly won't need.
> +CONFIG_IPMI_HANDLER=y
> +CONFIG_IPMI_DEVICE_INTERFACE=m
> +CONFIG_IPMI_SI=m
> +CONFIG_IPMI_WATCHDOG=m
> +CONFIG_IPMI_POWEROFF=m
Are you sure you have IPMI hardware?
> +CONFIG_FB=y
> +CONFIG_FB_TILEBLITTING=y
> +CONFIG_FB_SIMPLE=y
> +CONFIG_BACKLIGHT_LCD_SUPPORT=y
> +# CONFIG_LCD_CLASS_DEVICE is not set
> +# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
> +# CONFIG_VGA_CONSOLE is not set
> +CONFIG_FRAMEBUFFER_CONSOLE=y
> +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
> +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
> +CONFIG_LOGO=y
> +# CONFIG_LOGO_LINUX_MONO is not set
> +# CONFIG_LOGO_LINUX_VGA16 is not set
For new platforms, using the DRM subsystem is the recommend
way to do graphics, it mostly replaces the framebuffer subsystem
here.
> +CONFIG_STE_MODEM_RPROC=m
I think this is no longer there.
> +CONFIG_EXT2_FS=y
> +CONFIG_EXT2_FS_XATTR=y
> +CONFIG_EXT2_FS_POSIX_ACL=y
> +CONFIG_EXT2_FS_SECURITY=y
> +CONFIG_EXT3_FS=y
> +CONFIG_EXT3_FS_POSIX_ACL=y
> +CONFIG_EXT3_FS_SECURITY=y
Better use EXT4 for the defconfig instead.
Arnd