[PATCH v2 07/10] input: touchscreen: touch_adc: add generic resistive ADC touchscreen

From: Eugen Hristev
Date: Tue Mar 27 2018 - 08:36:24 EST


This adds a generic resistive touchscreen (GRTS) driver, which is based
on an IIO device (an ADC). It must be connected to the channels of an ADC
to receive touch data. Then it will feed the data into the input subsystem
where it registers an input device.
It uses an IIO callback buffer to register to the IIO device

Some parts of this patch are based on initial original work by
Mohamed Jamsheeth Hajanajubudeen and Bandaru Venkateswara Swamy

Signed-off-by: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
---
Changes in v2:
- this is now a generic resistive adc touchscreen driver

drivers/input/touchscreen/Kconfig | 13 +++
drivers/input/touchscreen/Makefile | 1 +
drivers/input/touchscreen/touch_adc.c | 199 ++++++++++++++++++++++++++++++++++
3 files changed, 213 insertions(+)
create mode 100644 drivers/input/touchscreen/touch_adc.c

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 4f15496..afd879f 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -92,6 +92,19 @@ config TOUCHSCREEN_AD7879_SPI
To compile this driver as a module, choose M here: the
module will be called ad7879-spi.

+config TOUCHSCREEN_ADC
+ tristate "Generic ADC based resistive touchscreen"
+ depends on IIO
+ select IIO_BUFFER_CB
+ help
+ Say Y here if you want to use the generic ADC
+ resistive touchscreen driver.
+
+ If unsure, say N (but it's safe to say "Y").
+
+ To compile this driver as a module, choose M here: the
+ module will be called touch_adc.ko.
+
config TOUCHSCREEN_AR1021_I2C
tristate "Microchip AR1020/1021 i2c touchscreen"
depends on I2C && OF
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index dddae79..cbe6121 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_TOUCHSCREEN_AD7877) += ad7877.o
obj-$(CONFIG_TOUCHSCREEN_AD7879) += ad7879.o
obj-$(CONFIG_TOUCHSCREEN_AD7879_I2C) += ad7879-i2c.o
obj-$(CONFIG_TOUCHSCREEN_AD7879_SPI) += ad7879-spi.o
+obj-$(CONFIG_TOUCHSCREEN_ADC) += touch_adc.o
obj-$(CONFIG_TOUCHSCREEN_ADS7846) += ads7846.o
obj-$(CONFIG_TOUCHSCREEN_AR1021_I2C) += ar1021_i2c.o
obj-$(CONFIG_TOUCHSCREEN_ATMEL_MXT) += atmel_mxt_ts.o
diff --git a/drivers/input/touchscreen/touch_adc.c b/drivers/input/touchscreen/touch_adc.c
new file mode 100644
index 0000000..de4b929
--- /dev/null
+++ b/drivers/input/touchscreen/touch_adc.c
@@ -0,0 +1,199 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ADC generic resistive touchscreen (GRTS)
+ *
+ * Copyright (C) 2017,2018 Microchip Technology,
+ * Author: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
+ *
+ */
+#include <linux/input.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/iio/consumer.h>
+#include <linux/iio/iio.h>
+#include <linux/module.h>
+
+#define DRIVER_NAME "touch_adc"
+#define GRTS_DEFAULT_PRESSURE_THRESHOLD 10000
+#define MAX_POS_MASK GENMASK(11, 0)
+
+/**
+ * grts_state - generic resistive touch screen information struct
+ * @pressure_threshold: number representing the threshold for the pressure
+ * @pressure: are we getting pressure info or not
+ * @iio_chans: list of channels acquired
+ * @iio_cb: iio_callback buffer for the data
+ * @input: the input device structure that we register
+ */
+struct grts_state {
+ u32 pressure_threshold;
+ bool pressure;
+ struct iio_channel *iio_chans;
+ struct iio_cb_buffer *iio_cb;
+ struct input_dev *input;
+};
+
+static int grts_cb(const void *data, void *private)
+{
+ const u16 *touch_info = data;
+ struct grts_state *st = private;
+
+ unsigned int x, y, press = 0xFFFF;
+
+ /* channel data coming in buffer in the order below */
+ x = touch_info[0];
+ y = touch_info[1];
+ if (st->pressure)
+ press = touch_info[2];
+
+ if ((!x && !y) || (st->pressure && (press > st->pressure_threshold))) {
+ /* report end of touch */
+ input_report_key(st->input, BTN_TOUCH, 0);
+ input_sync(st->input);
+ return 0;
+ }
+
+ /* report proper touch to subsystem*/
+ input_report_abs(st->input, ABS_X, x);
+ input_report_abs(st->input, ABS_Y, y);
+ if (st->pressure)
+ input_report_abs(st->input, ABS_PRESSURE, press);
+ input_report_key(st->input, BTN_TOUCH, 1);
+ input_sync(st->input);
+ return 0;
+}
+
+static int grts_open(struct input_dev *dev)
+{
+ int ret;
+ struct grts_state *st = input_get_drvdata(dev);
+
+ ret = iio_channel_start_all_cb(st->iio_cb);
+ if (ret) {
+ dev_err(dev->dev.parent, "failed to start callback buffer.\n");
+ return ret;
+ }
+ return 0;
+}
+
+static void grts_close(struct input_dev *dev)
+{
+ struct grts_state *st = input_get_drvdata(dev);
+
+ iio_channel_stop_all_cb(st->iio_cb);
+}
+
+static int grts_probe(struct platform_device *pdev)
+{
+ struct grts_state *st;
+ struct input_dev *input;
+ struct device *dev = &pdev->dev;
+ struct device_node *node = dev->of_node;
+ struct iio_channel *chan;
+ int ret = 0;
+
+ st = devm_kzalloc(dev, sizeof(struct grts_state), GFP_KERNEL);
+ if (!st)
+ return -ENOMEM;
+
+ ret = of_property_read_u32(node,
+ "generic-adc-resistive-touchscreen,pressure-threshold",
+ &st->pressure_threshold);
+ if (ret < 0) {
+ dev_dbg(dev, "can't get touchscreen pressure threshold property.\n");
+ st->pressure_threshold = GRTS_DEFAULT_PRESSURE_THRESHOLD;
+ }
+
+ /* get the channels from IIO device */
+ st->iio_chans = devm_iio_channel_get_all(dev);
+
+ if (IS_ERR(st->iio_chans)) {
+ if (PTR_ERR(st->iio_chans) != -EPROBE_DEFER)
+ dev_err(dev, "can't get iio channels.\n");
+ return PTR_ERR(st->iio_chans);
+ }
+
+ chan = &st->iio_chans[0];
+ st->pressure = false;
+ while (chan && chan->indio_dev) {
+ if (!strcmp(chan->channel->datasheet_name, "pressure"))
+ st->pressure = true;
+ chan++;
+ }
+
+ input = devm_input_allocate_device(dev);
+ if (!input) {
+ dev_err(dev, "failed to allocate input device.\n");
+ return -ENOMEM;
+ }
+
+ input->name = DRIVER_NAME;
+ input->id.bustype = BUS_HOST;
+ input->dev.parent = dev;
+ input->open = grts_open;
+ input->close = grts_close;
+
+ input_set_abs_params(input, ABS_X, 0, MAX_POS_MASK - 1, 0, 0);
+ input_set_abs_params(input, ABS_Y, 0, MAX_POS_MASK - 1, 0, 0);
+ if (st->pressure)
+ input_set_abs_params(input, ABS_PRESSURE, 0, 0xffffff, 0, 0);
+
+ input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+ input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+ st->input = input;
+ input_set_drvdata(input, st);
+
+ ret = input_register_device(input);
+ if (ret) {
+ dev_err(dev, "failed to register input device.");
+ return ret;
+ }
+
+ st->iio_cb = iio_channel_get_all_cb(&pdev->dev, grts_cb, st);
+
+ if (IS_ERR(st->iio_cb)) {
+ dev_err(dev, "failed to allocate callback buffer.\n");
+ ret = PTR_ERR(st->iio_cb);
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, st);
+
+ return ret;
+}
+
+static int grts_remove(struct platform_device *pdev)
+{
+ struct grts_state *st = platform_get_drvdata(pdev);
+
+ iio_channel_release_all_cb(st->iio_cb);
+ input_unregister_device(st->input);
+ return 0;
+}
+
+static const struct of_device_id grts_of_match[] = {
+ {
+ .compatible = "generic-resistive-adc-touch",
+ }, {
+ /* sentinel */
+ },
+};
+
+MODULE_DEVICE_TABLE(of, grts_of_match);
+
+static struct platform_driver grts_driver = {
+ .probe = grts_probe,
+ .remove = grts_remove,
+ .driver = {
+ .name = DRIVER_NAME,
+ .of_match_table = of_match_ptr(grts_of_match),
+ },
+};
+
+module_platform_driver(grts_driver);
+
+MODULE_AUTHOR("Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("Generic ADC Resistive Touch Driver");
+MODULE_LICENSE("GPL v2");
--
2.7.4